Condition: used, Year of construction: 2002, Please provide reference number upon request: 24431 Specifications: Year of manufacture: owner believes around 2002 Engine hours: approx. 2,200 (hour meter has been replaced, owner doesn't remember exactly) Bodpfx Aez Ax Ngogmedh Hammer hours: approx. 1,730 Motor has electrical fault Owner has glow plugs and several parts Ready for delivery   Description: circa 2002 Atlas Copco 542 HP drilling rig. Engine has electrical fault, owner says he has a lot of parts for it but not for the exhaust and manifold. The main power switch is on. It can come with drilling equipment for an additional price (drill rods and crowns). Ready for delivery. Own weight: 1 Model: Copco 542 HP borerigg = More information = Please contact ATS Norway for more information

Condition: used, power: 178 kW (242.01 HP), fuel type: diesel, Year of construction: 1999, operating hours: 1,378 h, HSB 216-P1 Year of manufacture: 1999 Drilling rig Bdodpfx Ajz A Hv Ejgmoh 242 kW Weight: 18,100 kg HSL 450-8 / 18HY-A-30/J

Condition: used, Year of construction: 2004, operating hours: 6,823 h, Unladen weight: 9,023 kg Contact Geert Geuens for further information. Bdsdeygq S Aepfx Agmjh

Condition: used, Year of construction: 2003, Please provide reference number upon request: 24435 Specifications: 2003 model Hours: 6,400 Only one owner Undercarriage (see photos) Track width: 30 cm Approx. 44 drill rods included 2 x 4" hammers included – one with a bit and one with an ODEX shank Ready for delivery Note: Broken wire between the ignition module and the start/stop control. Own weight: 12000 Bdedez Ax R Dspfx Agmeh Model: Gemrok 45 Borerigg = More information = Serial number: 03114xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2015, Please provide reference number upon request: 24406 Specifications: 2015 model Engine hours: owner believes around 5000 400 hammers New repackaged hammer this winter Chassis (see pictures) Belt width: 25 cm Machine width: 221 cm Sandvik grinding machine L5 machine control from 2020-2021 Volvo D5 engine Sometimes loses contact with radio control Ready for delivery   Description: 2015 Sandvik Dino DC400R drilling rig with machine control and grinding device. Bsdpfoz Adtksx Agmjdh The hammer was newly repackaged this winter, the owner says it has been used very little since then. It was also fully serviced that winter. Occasionally it loses contact with the radio control. The owner says it's a normal problem and it's possibly due to the wifi. Ready for delivery Own weight: 1 Engine hours: 5000 Model: Dino DC400R borerigg m/ maskinstyring og slipeapparat = More information = Serial number: 4xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2003, Please provide reference number upon request: 23270 Specifications: Owner believes it is a 2003 model DB 700 hammer Stroke hours: approx. 3,740 Engine hours: around 9,000 hours Full set of unused drill rods Overhauled hammer a year ago Remote control with cable Depth gauge error Recently served Winch Machine width: 240 cm Ready for delivery   Description: 2000 Tamrock 500 drilling rig with full set of new drill rods. Owner has recently serviced the machine and changed the oil and everything. The hammer was overhauled a year ago, not many hours ago. Owner has new gaskets and small parts for the machine. Own weight: 1 Model: 500 borerigg m/ full sett nye borestenger og overhalt hammer for et år siden! = More information = Bjdpfsy Rhlijx Agmsdh Please contact ATS Norway for more information

Condition: excellent (used), functionality: fully functional, empty load weight: 14,000 kg, Year of construction: 2014, EZ-W12 drilling truck Year 2014 Bdodpfx Agszzpdljmjh Weight 14 tons

Condition: used, Year of construction: 2007, Please provide reference number upon request: 22766 Specifications: 2007 model Hours: about 6,000 Hammer hours: uncertain but owner believes 2,500 2 radio transmitters Bdedpfx Aoywabijgmoh Central lubrication A hydraulic rod 1838 LE hammer Overhauled hammer 4 years ago Comes with 2 books Ready for delivery in early May     Description: 2007 Atlas Copco ROC D3 radio rig. The hammer was overhauled 4 years ago, but the owner says he hasn't used it much since then. Ready for delivery at the beginning of May. Own weight: 1 Model: ROC D3 radiorigg = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2012, Please provide reference number upon request: 21979 Specifications: Model year: 2012 Operating hours: Owner is unsure Double key system Deutz engine Bdjdjx Dhadopfx Agmeh Water tank Undercarriage (see photos) Washer Includes drilling equipment, 3 hammers Drilling capacity: 4–10 inch holes Service performed by owner Ready for delivery Own weight: 11 Model: Brønnborerigg = More information = Serial number: 120705xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2007, Please provide reference number upon request: 22927 Specifications: 2007 model BQTK wireline Air-cooled engine Sharebook 1995 IHI dump truck Left belt newer than right side Can be supplied with an electric generator for an additional price (see pictures) Ready for delivery Bjdpfx Aoy Ahg Rsgmodh   Description: 2007 Onram 1000/3 core drilling rig/diamond drilling rig w/ 1995 IHI dump truck. It is possible to remove the rig from the dump truck. If the owner had work up in the mountains, he could remove the rig and fly it up by helicopter. The engine on the rig has been replaced and they switched to an air-cooled engine. Ready for delivery. Own weight: 1 Model: 1000/3 kjerneborerigg/diamantborerigg m/ 1995 IHI dumper = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, operating hours: 13,741 h, 2008 | Delmag RH 18 on Sennebogen SR 25T | Used Drill | 13741 hours Bdjdpfezd Hbmox Agmsh 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 244000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 73 inspection points 71 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good operating Drill , with a Good running Cat engine , 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40183 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), mileage: 113,062 km, power: 188 kW (255.61 HP), gearing type: automatic, fuel type: diesel, tire size: 285/70 19.5, axle configuration: 4x2, number of seats: 3, first registration: 03/2019, emission class: euro6, suspension: steel, Year of construction: 2019, Equipment: ABS, air conditioning, crane, cruise control, = Additional Options and Accessories = - Armrest - Leaf spring suspension, front and rear - Flashing lights - Camera with monitor - Electric windows - Radio remote control - Radio/CD player - Reversing camera - Sun visor - Tool box - Power take-off (PTO) = Notes = - RISA (Type C2T) drilling rig - 1 x hydraulically extendable - Horizontal working range: 615 cm - Vertical working range: 900 cm - Drilling distance: 310–580 cm - Hydraulic extension parts - Maximum lifting capacity at maximum reach: 1500 kg - Support legs: 2 hydraulic support legs - Radio remote control - Oil cooler - Hydraulic winch by Brevini (Type EGO025/SD10), 2000 kg Bedpfezqu Uhox Agmedh - Several storage boxes - Only 113,062 km! - In good condition! = Additional Information = General Information Number of doors: 2 Cab: Day cab Technical Information Engine displacement: 7,698 cc Axle Configuration Tire size: 285/70 19.5 Axle brand: Anders Suspension: Leaf spring suspension Front axle: Max. axle load: 5800 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle: Double-tired; Max. axle load: 9440 kg; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Reduction: single reduction Dimensions Dimensions (L x W x H): 780 x 250 x 340 cm Wheelbase: 410 cm Weights Unladen weight: 9,875 kg Payload: 4,425 kg GVW: 14,300 kg Functional Crane: RISA G2T, mounted at the rear of the chassis Condition Technical condition: good Optical condition: good Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Condition: used, Year of construction: 1991, Equipment: all wheel drive, Welcome to Johanning’s Nutzfahrzeuge, your specialist for nearly-new and exclusive used vehicles. Location: 39606 Osterburg. Incoming! Viewing possible from approx. 20.04.2026. Below are some specifications regarding the ABI piling/drilling rig: - Base unit: Sennebogen ZR 20 T, year of manufacture 1991 - Attachments: ABI Mobilram 10 / 12,000, maximum usable length 9.50 m - Transport weight approx. 29 t - Earth drilling gearbox: ABI 2,250 (torque 2,250 kgm) - Augers: D 400 mm, connection: 80 mm hexagon, 4 pieces, each 2 m length - Mounting clamp for auger guidance D 400 mm with reducing bush 280 mm Additional images or videos available upon request. Johanning’s Nutzfahrzeuge – your partner for exclusive and nearly-new used vehicles. Our services – your advantages: - Trade-in of your vehicle possible (any condition) after sale - Immediate free deregistration of your vehicle Bodoz D R Aropfx Agmedh - Registration service available for €150 (incl. fees and licence plates) - Short-term registrations - Viewing and test drives possible anytime by prior telephone arrangement - Free home delivery by arrangement Subject to errors and prior sale.

Condition: used, Year of construction: 2008, operating hours: 9,085 h, Please provide reference number upon request: 24258 Specifications: 2008 model Hour meter: 9085 hours Repair object Power: 354 kW Weight: 16,000 kg Transport belt Magnetic belt Grinder Engine failure Leak at the top of the motor Hook frame Mover Ready for delivery Description: We have a 2008 Raptor XL-D grinder for wood available for sale as a repair object. The grinder was recently taken out of operation due to engine failure. It is therefore sold as a repair object. There are faults and deficiencies, and some costs for repairs should be expected. The buyer must dismantle the grinder so that it can be transported away from the area. It is on a hook frame. Ready for delivery. Hours: 9085 Own weight: 16000 Bsdpfx Agszyt N Njmjdh Model: XL-D kvern for trevirke Rep.objekt = More information = Please contact ATS Norway for more information

Year of construction: 2009, operating hours: 13,657 h, condition: used, NCB FD 1800 HD DT 18,447 operating hours Year 2009 With Fassi F80A.23 + remote control from year 2003 UNDERCARRAGE Overall Length 3210 mm Track Width 2350 mm Shoes Width 500 mm ENGINE DEUTZ Engine Type TCD 2013 L6 2V Maximum Power Output 190 kW Rated Output 2300 r.p.m. Fuel Tank Capacity 350 l HYDRAULIC SYSTEM Hydraulic Pumps 1st Circuit 80 l/min 2nd Circuit 55 l/min 3rd Circuit 55 l/min Hydraulic Oil Tank Capacity 481 l Working Pressure 250 bar MAST Mast Length 8000 mm Pull-Down Cylinder Force (Push/Pull) 13000/20000 kgm Pull-Down Stroke 4300 mm Maximum Rods Length 4000 mm ROTARY HEAD T3-2000 Maximum Torque 2045 kgm Speed Range 0 - 113 rpm Number of Hydraulic Motor 3 Type of Hydraulic Motors CHAR-LYNN T2-1000 Maximum Torque 1000 kgm Speed Range 0 - 88 rpm Number of Hydraulic Motor 2 Type of Hydraulic Motors DANFOSS WINCH AUXILIARY WINCH Maximum pulling force (1st Layer) 15 kN Rope Diameter 10 mm CLAMPS CLOSING CLAMP Blocking Clamp Diameter 350 mm Blocking Clamp Force 15300 daN BREAKOUT CLAMP Blocking Clamp Diameter 350 mm Blocking Clamp Force 5500 daN Break-Out Force 15300 daN THIRD CLAMP Blocking Clamp Diameter 350 mm Blocking Clamp Force 15300 daN AUXILIARY SERVICE CRANE Fassi F.80 WATER PUMP (UDOR 200) Maximum Water Delivery 200 l/min Maximum Water Pressure 80 bar Bdedezmr Nuepfx Agmsh WEIGHT Total Weight- approx 20 ton = Further Information = General Information Year of Construction: 2009 Intended Use: Construction Technical Information Power: 188 kW (256 hp) Fuel Type: Diesel Functional CE Marking: yes Condition Overall Condition: good Technical Condition: good Optical Condition: good Financial Information Price: On request Further Information Please contact Klaas Gerrits, Peter Gerrits, or Mr. Gerrits for further information.

Condition: used, Year of construction: 2016, Please provide reference number upon request: 24299 Specifications: 2016 model Engine hours: approx. 3,278 Drilling hours: approx. 717 Bdsdpfxszyt Raj Agmoh 105 kW 11,100 kg Hammer overhauled in spring 2025 Serviced by Sandvik Track width: approx. 25 cm Machine width: approx. 220 cm Winch Comes with some drill rods and drill bits Description:Sandvik Dino DC400 drill rig from 2016.The owner has had the rig for approximately 5 years, and all servicing has been carried out by Sandvik during this period.Some drill rods and drill bits are included.The hammer was overhauled in 2025.Can be delivered at short notice. Own weight: 11100 Engine hours: 3278 Model: Dino DC400RI Borerigg = More information = Please contact ATS Norway for more information

Condition: used, Please provide reference number upon request: 23397 Specifications: Model: around 1988 Hours: approximately 9,100 Belt width: 25 cm Machine width: 233 cm Winch Ready for delivery   Description: Atlas Copco ROC 410 HC drilling rig Bedpfx Agsy Skqdjmodh Owner says he's had it since new, had only had a few hours on it when he got it. Around 1988 model. Ready for delivery. Own weight: 1 Model: ROC 410 HC borerigg = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 1997, Please provide reference number upon request: 23207 Specifications : 2002 model. 8465 hours. 59.5 kW. Additional hydraulics. 1 dental tray. Extra tires included. Cut. Watch video. Description : Atlas 1304 with a toothed bucket and some extra tires for sale. There are few hours on the machine. There are occasional electrical faults on the machine, some warning lights come on but they disappear on their own. Ready for delivery. Own weight: 5000 Model: Commando 300 = More information = Serial number: Serial no. 97Axxxx Bdodey Nh Nrjpfx Agmjh Please contact ATS Norway for more information

Condition: good (used), mileage: 25,995 km, power: 188 kW (255.61 HP), first registration: 11/2021, fuel type: diesel, tire size: 275/70 22.5, axle configuration: 4x2, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, crane, cruise control, differential lock, trailer coupling, = Additional Options and Accessories = - Armrest - Leaf spring suspension, front and rear - Flashing lights - Camera with monitor - EBS - Electric windows - Euro 6 - Remote control - Radio/CD player - Reversing camera - Sun visor - Tool box - PTO (Power Take-Off) - Tow hitch = Notes = - RISA drilling rig (Type: C2T) - 1 x hydraulically extendable - Horizontal working range: 615 cm - Vertical working range: 900 cm - Drilling distance: 310–580 cm - Hydraulic extension parts - Maximum lifting capacity at maximum outreach: 1,500 kg - 2 hydraulic outriggers - Includes various drill heads - Remote control - Oil cooler - Brevini hydraulic winch (Type: EGO025/SD10), 2,000 kg - Water tank: 200 liters - Various storage boxes - Trailer hitch 52 mm - Only 25,995 km! Bdjdpfx Aozl Eubsgmoh - In good condition! = Additional Information = General Information Number of doors: 2 Cab: Day cab Technical Information Engine displacement: 7,698 cc Axle Configuration Tire size: 275/70 22.5 Suspension: Leaf spring suspension Front axle: Max. axle load: 5600 kg; Steered; Axle brand: Other; Tire tread left: 60%; Tire tread right: 60% Rear axle: Dual tires; Differential lock; Max. axle load: 9440 kg; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Reduction: single reduction Dimensions Dimensions (L x W x H): 780 x 250 x 340 cm Wheelbase: 410 cm Weights Unladen weight: 10,902 kg Payload: 2,098 kg GVW: 13,000 kg Functional Crane: Risa G2T, rear mounted on the chassis Condition Technical condition: good Optical condition: good Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Condition: used, power: 127 kW (172.67 HP), gearing type: hydrostat, fuel type: diesel, tire size: 14.00/R24, tire condition: 90 %, axle configuration: 4x4, first registration: 06/2012, emission class: euro3, Year of construction: 2012, operating hours: 10,000 h, Equipment: air conditioning, all wheel drive, onboard computer, - 1 fuel tank - Adjustable seats - Air seats - Auxiliary lamps - Central lubrication - Climate control - Driver seat manual adjustment - Electrically operated mirrors - Heater - High beam control system - Hydraulic power steering - Originally painted - Power steering - PTO - Tool box The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. - Note: at the JAMA dealer, the cost of such a new machine is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one in the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: Bedozx Eu Iepfx Agmodh JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drive system: two axles, turning radius 5.2 m Stabilisation: four stabilizing supports and a blade at the front Safety system: "Danger Mode” enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Controls: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit from the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! Detailed information from the seller. - The price includes a complete set of documents for registration. In the case of a Udt test requirement, we also perform it for a fee and quickly. We offer any form of payment: Leasing, credit, cash and transfer. When paying in cash or by bank transfer, you can drive the car out of the showroom right away. Additionally, we deal with insurance - we will calculate the cheapest premium for any vehicle - CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services from the sellers. General information Field of application: Mining Technical information Number of cylinders: ...

Condition: used, Year of construction: 2022, operating hours: 1,100 h, Please provide reference number upon request: 24446 Specifications: 2022 model Hours: Approx. 1,100 Weight: 17,450 kg Belt width: 105 cm Belt length: 2,280 cm Capacity: Approx. 500 t/h Maximum angle: 25 degrees Remote control Hybrid Bodpfez A Rdaox Agmjdh Transport dimensions: Length: 1,188 cm Width: 225 cm Height: 288 cm Hours: 1100 Own weight: 17450 Model: CT80 Stacker = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 1985, Please provide reference number upon request: 23281 Specifications: 1985 model Number of hours unknown Weight: 10,700 kg Dust collector Not used for the last 3 years Owned for approximately 10 years Winch Extra drill bits included Ready for delivery Description: 1985 Tamrock DHA500 drilling rig.According to the owner, the rig has not been used for the last 3 years.Ready for delivery. Own weight: 10700 Model: DHA500 Borerigg. = More information = Bodpoy Ri D Hsfx Agmedh Serial number: 50xxxx Please contact ATS Norway for more information

Year of construction: 2021, operating hours: 600 h, condition: used, Mud rarely used. Fits Vermeer, Ditch Witch, and TORO. Fully operational. The Ditch Witch FT5 model is a drilling fluid management and mixing device used in jacking/directional drilling (HDD) applications. Released in 2021. Drilling fluid tank capacity: 200 gallons (≈ 757 L) Maximum flow to drilling unit: 18 gpm (≈ 68 L/min) Engine: Honda GX160 (single-cylinder, air-cooled) Bsdpfxjzx Et De Agmodh Dimensions (standard) Length: 1.85 m / with hose and valve: 2.13 m; width: 0.813 m; Height: 1.36 m Weight (dry) ~ 182 kg Weight with filled tank (full water) ~ 939 kg The unit has a narrow tank, allowing it to be placed next to the drilling machine on a trailer – making it easier to transport to the jobsite. It features a Venturi wet hopper, which allows for the efficient mixing of additives with the fluid, speeding up mixing cycles. The design is relatively simple, with several configuration options to adapt the equipment to various jobsite layouts. The FT5 series is part of the Ditch Witch fluid management system line. The price shown is net and valid for export and business use. A significant discount is available for individual customers - Please contact us directly by phone to obtain the best price :) = More information = Type of fuel: Petrol Year of manufacture: 2021 Field of application: Construction Make of engine: Honda Warranty: 3 months Purchase on credit is possible: Yes Leasing is possible: Yes

Condition: used, Year of construction: 2012, Please provide reference number upon request: 22926 Specifications: 2012 model NQTK wireline Deutz 6 cylinder engine (air-cooled engine) Bean pump Winch Sharebook 2000 Hanix RT1000 dump truck Mitsubishi engine on dump truck Can be supplied with an electric generator for an additional price. Ready for delivery   Description: 2012 Sandvik DE130 core drilling rig/diamond drilling rig w/ 2000 Hanix RT1000 dump truck. It is possible to remove the rig from the dump truck. If the owner had work up in the mountains, he could remove the rig and fly it up by helicopter. Bdodsy Ahhujpfx Agmoh The engine on the rig has been replaced and they switched to an air-cooled engine. Ready for delivery. Own weight: 1 Model: DE130 Kjerneborerigg/diamantborerigg m/ 2000 Hanix RT1000 dumper = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, Please provide reference number upon request: 22928 Specifications: Comes with TT46 pipe The rig only drills 46mm Winch Diesel 2002 Kubota RG30i dump truck Ready for delivery   Description: 2008 Atlas Copco Diamec 232 diamond drilling rig with 2002 Kubota RG30i dump truck. The rig can only drill 46mm. Ready for delivery. Own weight: 1 Model: Diamec 232 Bedjy Ahhhspfx Agmedh = More information = Please contact ATS Norway for more information