Lowbed

Humbaur Humbaur 3-Achs Auflieger Radmulden/Lifta./Verzinkt HTS30K- Radmulden

Condition: used, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 03/2024, loading space length: 6,850 mm, loading space width: 25,400 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2024, Equipment: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,785 mm long - Gooseneck hydraulically liftable/lowerable as well as detachable - Technical kingpin load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Area: - Low-bed with external beams in extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed section with fixed hardwood floor, approx. 40 mm thick, and pneumatically actuated locking mechanism - Supply lines are protected inside the extendable beams and automatically adapt to the respective length of the low-bed - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD lashing rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axles, all axles hydro-mechanically forcibly steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and positioning pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tool kit - Tyres: 245/70 R 17.5 Braking System: - Braking system compliant with EU regulations with EBS-E, without connection lines to the tractor unit Gjdpfxsrtqyls Aaxebw Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer - Rear section metallized and painted in RAL 9010 Included Accessories: - Prepared for bolted container locks for 1x 20' or 1x 40' containers on the external beams - One galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 2 wheel chocks with holder on the front wall - Rear steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - On the gooseneck and on the rear plate, left and right, a holder for warning panels incl. socket - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable - 5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area, 2 pairs in the outer frame of the chassis - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the low-bed mounting hooks - 80 km/h speed stickers at the rear and on both sides - On the warning boards, a mount for a revolving beacon - Radio remote control for rear steering in addition to the cable remote, with LED indicators on the receiver as single-track control - Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump - Excavator dipper trough at the rear chassis closed at the rear with a plug-in plate

Condition: new, axle configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, Equipment: ABS, Availability: approx. 4 months after receipt of order Kässbohrer 3-axle low loader wheel wells extendable / extendable NEW VEHICLE Axles / brake system: # BPW axles with drum brake 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x Continental HTR 2 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1,250 mm # Low bed length: 9,240 mm + 3,500 mm extendable # 9 x 2 lashing eyes 6 tonnes in the outer frame # 2 x 2 lashing eyes 6 tonnes in the neck # 4 x 2 lashing eyes 6 tonnes on the low bed # Extra-wide brackets 300 mm extendable # Hardwood floor 45 mm # Color: MB 7350 nova gray or RAL 3020 traffic red # Excavator arm trough Ramps: # Hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 11° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Other: # 4 x over-width signs with bracket for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full trailer support frame at the front # Manual rear support galvanized # 2 inch kingpin # 24V lighting system Aspöck # E-bike holder with spare wheel ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany. Gbjdpsgimywjfx Aaxjw

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 Gbedpfxehlz R Ss Aaxjw -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, axle configuration: 3 axles, Equipment: ABS, Availability: approx. 4 months after receipt of order! Kässbohrer 3-axle low loader, rigid / not extendable, NEW VEHICLE Godsht Tt Hepfx Aaxjbw Axles / brake system: # BPW axles with drum brakes 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x branded tires 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1250 mm # Low bed length: 9,240 mm # 7 x 2 stake pockets 52 x 102 mm # Lashing eyes gooseneck: 1 x 2 10 tonnes, 2 x 2 5 tonnes # Lashing eyes rear platform: 3 x 2 10 tonnes, 4 x 2 5 tonnes # Extra-wide brackets 300 mm extendable # Hardwood floor 45 mm # Color: RAL 3020 traffic red Ramps: # hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 9° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Other: # 4 x over-width signs with bracket for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full trailer support at the front # manual rear support galvanized # 2 inch kingpin + 2nd position for kingpin # 24V lighting system Aspöck # E-bike holder with spare wheel

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm -Rear gooseneck with bevel approx. 1,000 mm x 10° Loading area: -Loading area in extendable design, length approx. 8,800 mm, with bevel at the rear approx. 500 mm x 10° -One recess protruding into the loading surface and into the chamfer to accommodate the excavator dipper arm -Pneumatic locking with conical locking pins and reinforced locking positions -Hardwood covering on the bevel of the loading area Ramps: -1 Pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm -Ramps with hardwood decking -Hydraulically folding ramp tips -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -Square climbing ledges 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and suspension: -BPW axles and suspension, 1st axle with preload steering, all other axles with forced hydromechanical steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -235/75 R 17.5 twin tires -TPMS tire monitoring system in accordance with ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheels Accessories included: -steel front wall, pluggable, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Gbedpfx Aask Aht Usxow -Parking position on the gooseneck for the warning signs when not in use -1 Spare wheel -On the gooseneck 1 pair of plug-in ALU side panels, approx. 400 mm high, anodized -One plug-in ALU rear panel on the gooseneck, approx. 400 mm high, anodized -Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin -2" kingpin -Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide -4 wheel chocks -Mechanical seat posts with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -1 Intermediate table, approx. 300 mm wide -Widenings (galvanized) extendable by approx. 230 mm per side -Wheel recesses with square climbing rails -ALU covers for the wheel recesses -1 pair of mechanical rear supports -Steering can be operated from the front and rear by cable remote control, with tracking control of the axles -1st axle with automatic lift axle function -Central lubrication system with 1 pump, BEKAMAX brand -Radio remote control for operating the self-steering, in addition to the cable remote control, with 2 indicator lights on the receiver as toe-in control -Wabco Smart Board System -4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -telescopic loading area with rear slope approx. 1,000 mm x 8° -1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widenings in the lower area -A pair of fixed wheel recesses between the 1st and 2nd axles, approx. 1,610 x 970 x 400 mm -3-piece removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 to / pc. -Recess in the chamfer and protruding into the loading area to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) -5 pairs of lashing rings foldable outwards (LC 5,000 daN) -2 pairs of lashing rings can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator trough (LC 5,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) One-piece ALU ramps: -One pair of one-piece ALU ramps approx. 2,500 x 600 mm -Ramp with spring lifting mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking lights -Galvanized extensions, extendable by approx. 230 mm per side Gbjdpfxsiu Er As Aaxew -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -One bracket for the warning signs including socket on the left and right of the gooseneck and on the rear panel -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container -3 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the loading area to prevent slipping -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A bracket for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, color: red, overall weight: 16,700 kg, drive condition: 100 %, chain condition: 100 %, Year of construction: 2022, Equipment: UVV, The Terex® Finlay 860 mobile screen is a compact and aggressive heavy-duty forward-facing screen. This highly versatile and highly flexible plant offers top performance in primary and secondary crushing, e.g. processing aggregates, sand and gravel, topsoil, construction waste and recycling applications in confined spaces. The fully self-contained plant is hydraulically foldable and ready for transport in less than 30 minutes. The option of feeding from a crusher, screen or loader makes it ideal for contractors and small operators. - Feed hopper 2.9 m³ - upper screen deck 2.77 x 1.22 m - lower screen deck 2.68 x 1.22 m - total screen area 6.7 m² - width of main discharge conveyor 1,000 mm - discharge height 3,030 mm - width of side conveyors (fine and medium fraction) 650 mm - discharge height approx. 3,640 mm - width of base plates 400 mm Transport dimensions: 9.20 x 2.50 x 3.10 m Weight: approx. 16,700 kg This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref.: 80 The Terex® Finlay 860 mobile scalper is a compact and aggressive forward facing heavy duty screen. This highly versatile and flexible machine excels in primary and secondary screening applications such as aggregates, sand and gravel, top soil, construction demolition and recycling applications where site space is at a premium. The fully self-contained plant can be hydraulically folded and ready for transport in less than 30 minutes and can be fed by a crusher, screener or loader making it the ideal machine for contract screening and small scale operators. - hopper 2.9 m³ - top deck 2.77 x 1.22 m - bottom deck 2.68 x 1.22 m - complete screening area 6.7 m² - width main conveyor 1,000 mm Gbjdpfovygbcox Aaxsw - stockpile height 3,030 mm - width side conveyor (fine and midfraction) 650 mm - stockpile height approx. 3,640 mm - track pads 400 mm wide Transport measurements: 9.20 x 2.50 x 3.10 m Weight: approx. 16,700 kg This offer is non-binding. No responsibility for equipment details, errors excepted. Subject to prior sale.

Condition: new, empty load weight: 5,680 kg, maximum load weight: 18,320 kg, overall weight: 24,000 kg, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 r17,5, Year of construction: 2023, Equipment: ABS, Three-axle trailers Gedoh I H Ddepfx Aaxobw BPW low-loader axles Electric air suspension with 2 ride heights Lowering function for safe loading Brake system according to EC guidelines with 2S/2M Drawbar with drawbar eye d=50 mm Raising and lowering of the drawbar 8 pairs of lashing rings 10 tons sunk into the drop deck 6 pairs of lashing points 2 to above wheel cut-out 5 pairs of lashing/stake pockets 3 tons for 90x50 mm stakes 50 mm softwood decking Hot-dip galvanized chassis frame Folding side collision protection Stake pocket package in the outer frame One-piece hot-dip galvanized drive-on ramps laterally movable Direct-acting vertical spring jacks

Condition: new, empty load weight: 10,100 kg, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75R17,5, Equipment: ABS, | Humbaur HTS30K low loader new vehicle | 1st axle liftable, 3rd axle trailing steered, | Wheel recesses front top 2500mm depth 390mm | Wheel recesses rear top 1280mm depth 320mm | Excavator recess dimensions: 2700mmx750mmx1895mm | Chassis frame hot-dip galvanized | Ramps 3100mmx750mm | Low bed length: 8400mm | Width: 2.54m | Width of high bed: 2.47m | Kingpin can be moved by 340mm | SAF axles with drum brakes | Dead weight: 10100 kg | Total weight: 48000 kg | Technical 51000kg | 235/75/R17.5 twin tires | Hydraulic ramps can be moved sideways, | Hydraulic rear support, | Coupling height 123cm | Input errors, mistakes and advance sales subject to change Gbedpfx Aasvx Tg Aoxsw

Condition: new, maximum load weight: 37,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2024, * TS 3 RM 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW axles * Air suspension with lifting and lowering system and RtR valve * Last axle as self-steering axle with electro-pneumatic steering lock * Side impact protection * Landing gear at the front and swivel supports at the rear of the chassis * 15-pin power connector * LED taillights * Mechanical Adjustable warning sign packages at the front and rear * Rotating beacon (removable) at the rear left * Straight sheet steel fenders * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Trailer platform with 45° beveled front corners and a toolbox at the front made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with a hinged lid * 400 mm aluminum side walls (RAL 9010) on the sides of the trailer platform, foldable and removable * Rear wall -150 mm- high * Rear slope on the trailer platform to the low bed, approx. 700 mm long, each with one recessed lashing ring * Trailer platform with 50 mm clamped wooden planks and low-loading platform with 60 mm clamped wooden planks * Teardrop plate above the axles * 9 mechanical folding extensions to 3 m Total width, but not including the rear slope (extension planks present with closed storage compartment perpendicular to the direction of travel under the loading area) * 2 lashing bars embedded in the outer frame of the semi-trailer platform on each side, 3 lashing rings on each side in the low-loader platform, and an additional 1 lashing ring in the center of the rear end beam, 2 x 5 ton lashing rings screwed to the bottom of the outer frame of the wheel wells on each side, * 2 x 6.4 ton lashing rings on each side. UVV lashing rings in the excavator boom rest * Excavator boom rest from the end of the last rigid axle over the steering axle to the end support, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm * Two wheel recesses on each side, 390 mm deep and 640 mm wide, with retractable covers for transporting wheel loaders with a wheelbase of 3,120 - 3,620 mm, front recess at the bottom, slanted upwards by 1,100 mm to a length of 2,050 mm, rear recess at the bottom, slanted upwards by 580 mm to a length of 1,550 mm * Hydraulic. Folding ramp with extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic lateral ramp adjustment. * The outer board on the ramp is made of 50 mm hardwood. * Loading area above the turntable: approx. 3,950 x 2,480 mm. * Loading height (unloaded): approx. 1,470 mm. * Lower loading area: approx. 8,500 x 2,520 mm. * Loading height (unloaded): approx. 910 mm (including 860 mm approach slope). * Chassis, folding supports at the rear, loading ramps, mechanical. Hot-dip galvanized folding extensions * -- Axles, springs, and air chambers painted in a single black tone -- * Suitable for 2- and 3-axle tractors * Fifth wheel height: approx. 1,220 mm * Tires 235/75R17.5 * Gross vehicle weight of 48,000 kg technically possible * Vehicle is hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change Gbedpfxjl Tiiyo Aaxjw * Available for immediate delivery from Egestorf