Swap body semitrailer

KÖGEL S24-2 BDF-Auflieger verlängerbar Liftachse *NEU*

Condition: new, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 12,360 mm, total width: 2,550 mm, total height: 1,800 mm, Year of construction: 2021, Equipment: ABS, Interchangeable chassis trailer for 40', 2x 20', 1x 30', 1x 40' HC containers * Lift axle * Rear extension, pneumatically extendable by 1360 mm Laedpfx Afokbvvisksd * SAF axles with disc brakes * Jost landing gear * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Chocks ----Vehicle number 6915 -----Errors and prior sale excepted WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Lasdpjizu Ntjfx Afksd Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle steered Laedpfoiu Er Ajx Afksd -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). Laodpfxew Dl Hwo Afked 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, brand-new Wiese Wingliner semi-trailer in OpenTop design * SAF axles with air suspension and disc brakes * Tires: 6-ply 385/65 R22.5" * Wabco brake system * LED lighting * Titgemeyer outer frame, with 12 pairs of lashing brackets embedded in the outer frame * 1x spare wheel holder * 2x stainless steel toolbox, approx. 1,000x500x500mm * Wingliner OpenTop body * Side wall on the left and the roof can be opened completely for loading. Lajdjuqgugspfx Afkod * Drive via electro-hydraulic unit. * Radio remote control * etc... The vehicle is also available for hire!!! For further information we are at your disposal

Condition: new, axle configuration: 3 axles, Equipment: ABS, Dear interested party We would like to introduce our mobile wellness unit to you. The offer includes the construction, but we can also help you purchase a trailer on request. The cabin contains a built-in sauna and a built-in bathtub. The cabin is comfortable even when closed and can easily be converted into an open outdoor unit with its 2 opening sides. Tub: | Wood-fired or electric version | 1000 liters of water | 6 persons | Filling time approx. 30 minutes Sauna: | Harvia Vega BC80 E ? 8 kW electric sauna heater | Harvia M3 wood-fired sauna heater The cabin also includes: | Built-in shower head and associated 600-liter water tank | Television | HPC hydraulic rammer - also controllable from cell phone | Boiler | Power converter | 2 accumulator - Thule awning Info at Lsdpfx Afou H Eanskjad

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon Ledsmtwypspfx Afkoad * Tire well bridge for closing the wheel wells Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: new, maximum load weight: 34,815 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Cheese drill SPA Mega extendable HD platform trailer Immediately available TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4285 mm Ljdpfx Afel N Syvokead * Platform length 8,950 mm * Extension 6,900 mm Platform extension * Extension locking positions 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Gross vehicle weight (80 km/h) 45,000 kg * Gross vehicle weight (60 km/h) 46,000 kg * Unladen weight 10,185 kg CHASSIS: BPW axles with air suspension and disc brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * 1st axle liftable * Wabco brake system * Tires 445/45 R19.5 * 1x spare wheel holder CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm hardwood floor * 8x2 side extensions extendable up to 300 mm * Telescopic support winch front 50t capacity * Mechanically folding rear outriggers 45t capacity RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * Container locks suitable for 1x20 ft , 2x20 ft , 1x40 ft , 1x45 ft , * 1,700 mm steel end wall with Code XL certificate ACCESSORIES: 1x stainless steel toolbox * Stanchion box on bulkhead * 2 x 2 extra-wide boards with LED lighting * Rotating beacon Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: used, Year of construction: 2024, operating hours: 100 h, Hoeflon Mini Crane C4e – Demonstration Unit Multifunctional compact crane First registration: May 16, 2024 Capacity: 2350 kg Max. swivel range: 11.7 m x 144 kg Max. lifting height incl. options: 15.1 m Dimensions L x W x H: 2.8 m x 0.75 m x 1.82 m Dimensions incl. winch and jib: 3.04 m x 0.75 m x 1.95 m Total weight: 1,900 kg, with options 2,150 kg Mast system: Cylinder and chain system Jib angle: -5 to 83 degrees Swivel: 360 degrees Drive system: with remote control Ledpfoi N Uynox Afkjad 1st gear: 1.2 km/h 2nd gear: 2.4 km/h Engine: Yanmar 3-cylinder, 1500 rpm Tilt angle: 20 degrees Ground pressure: 0.59 kg/cm2 Included special equipment: Fly jib Winch: 3000 kg Extension section adjustable by 30° Outriggers, foldable

Condition: new, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Equipment: * 12t distribution axle, extended day cab, roof-mounted air intake * Mechanically reinforced cab suspension * Extended day cab * Central locking, 3 keys, 2 remote controls * Green translucent exterior sun visor * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Side and rear windows non-glazed * 5 mirrors * Electrically adjustable mirrors * Front view mirror * Mirror brackets for body width 2.50 - 2.60 m * Headlight beams for right-hand traffic * Reversing camera * Adjustable roof spoiler * ETD white * Headlamp surround and bumper in cab color * Roof spoiler in cab color * Cab steps and wheel arches in cab color * Chassis painted anthracite grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver seat: air-suspended luxury driver's seat * Armrest driver's seat * ECAS remote control * Converter 24V to 12V, 15A, 180W * Left-hand drive * Soft-touch steering wheel, color black * Black seat belts * Passenger seat: fixed, velour * Engine tunnel storage compartment * Air conditioning * Power windows, electric * Digital tachograph, VDO 1C, version G2V2 * Adaptive cruise control with FCW and AEBS-3 * Pre-installation for toll system * Speed limiter setting 85 km/h * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS interface, pre-wired * FM/DAB/DAB+ radio with speakers incl. phone connection * Driver Performance Assistant * Lane change warning system * Electronic Stability Control (VSC) * Reversing warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Alcohol interlock, pre-installed * Speed limit recognition * DAF Drowsiness Detection * Conforms with UN regulations R155 and R156 * Rear: 8.50 t, air suspension, SR8.14 * Front: 4.50 t, parabolic, 45N * Front axle 1, 4,480 kg, load index 136 * Rear axle 1, 8,480 kg, load index 134 * Silver-grey wheel trims * Tire pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * Steel disc wheels, silver-grey * F1, 245/70R17.5 GO KMAXS2 136/134 M Steering CCA 3P * R1, 245/70R17.5 GO KMAXD2 136/134 M Traction CCA 3P * RR, not applicable * Rear axle ratio 3.73 * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive gearbox, 4.89-0.64 * PX-7 engine, 167 kW/227 hp. Cab badge: 230 * Emissions class Euro 6 * Traction control (ASR) * Idle shutdown automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase 5.40 m / rear overhang 2.43 m Lajdpfx Afjx Hmz Ijkjd * One wheel chock * Plastic fuel tank, 185 l * Standard component arrangement * Front underrun protection * Splash guard * AdBlue® tank 30 l, right chassis side * Fuel tank on the left * AdBlue® tank filler cap without lock * Temporary rear light brackets * Rear lights with bulbs * Battery box on the left, no spare wheel mount * Longitudinal members 210/6.0 mm, without internal reinforcement * EAS unit on right, discharge to the rear right * For operation with drawbar trailer, type plate up to max. GVW * Pneumatic trailer connection, turntable coupling * Crossmember D85-Dc70-V25, coupling D85, mounted * Trailer electrical connection + EBS, 24V/2x7-pin * Body mounting: BAM 1, loose brackets * Fixed connection for engine speed control chassis * Body connector on chassis * Side marker lights * Tail lift application * Alternator 100A, batteries 2 x 175 Ah * Technically permissible GVW