Low loader semitrailer

MEUSBURGER MTS-2 Tieflader RADMULDEN

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Body: Water tank roll-off container, approx. 12,700 liters. Roll-off container/water tank approx. 6,000 to 13,000 liters. Ncedelu Hruopfx Akcsw The volume of the tank shown is approx. 12,700 liters. - Clear internal dimensions L x W x H: 5400x2400x1200 mm (tank 4600mm, platform 800mm) - Material grade: S235 (St-37) - Bottom plate / wall plates: Smooth bottom plate, thickness 5mm, sides 3mm - Forklift pockets on the bottom of the container - Rollers, greaseable - Ventilation with lid/access at the top - C-connection with flap at the top - A-connection with ball valve at the rear - Epoxy coating inside, 50 microns - Primed and painted outside, 40 microns - 2 internal bulkheads - Ladder on the front wall, right side - Additionally, a C-connection with ball valve at the front on the front wall, bottom left The container is fully welded, degreased, blasted, primed inside with epoxy coating 50 µm, primed outside with alkyd primer 40 µm and painted with alkyd resin paint 40 µm in RAL color of your choice. Delivery time: approx. 20-22 weeks Available from 6,000 to 13,000 liters. Price depending on the number of liters between EUR 9,900.00 and approx. EUR 14,000.00 per liter/volume. Available with self-priming water pump, self-lubricating with separate motor, flow rate: 129 m³/hour, 2000 l/min, pump height: 17m, grain size: 28mm, fuel: diesel, tank: 4.3 liters, see 2907, additional cost approx. EUR 4,000! Available as a roll-off container as well as a tank. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. Nodpfowta Alox Akcjcw WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Ncodjiu Er Ajpfx Akcow Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle steered -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur

Condition: used, maximum load weight: 42,500 kg, overall weight: 60,000 kg, axle configuration: 3 axles, first registration: 06/2022, with 12 axles, hydraulically suspended and divided, with hydromechanical forced steering, rear taper and drive-on ramps STZ-L Gooseneck - Robust welded steel construction - Engineered loading platform 3,950 x 2,480 mm including rear taper - Hydromechanical forced steering (dual-circuit steering system) Nodpfxow Etd Ts Akcecw - Turntable-mounted fifth-wheel plate with interchangeable 2-inch or 3.5-inch kingpin and adjustable steering wedge - Fifth wheel load: 24 t - Rear max. steering radius: 2,600 mm Loading platform - Lowered outer sections 4,630 mm long, 420 mm deep, resulting in a loading height of 470 mm or 830 mm with floor inserts - Extendable by 2,053 mm - Includes aluminum bridging rails for creating level surfaces - Excavator boom trough at rear running gear: 4,900 mm long, 880 mm wide, 480 mm deep - Length of rear running gear: 4,900 mm incl. 500 mm rear taper, loading height 890 mm - One pair of wheel recesses in lower deck - 3-axle hydraulically suspended running gear - Split Gigant axles with 600 mm stroke Rear of vehicle - Tapered design, 500 mm - Rear hydraulic support Drive-on ramps - Two-part drive-on ramps, 2,850 + 1,850 mm long, 800 mm wide - Rubber-coated with climbing bars Braking system - Dual-line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical data Gooseneck Loading platform (LxW): 3,950 x 2,480 mm Loaded fifth wheel height: 1,300 mm Loading platform Platform (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer sections: 4,630 mm + 2,053 mm extension Center beam: 980 mm Excavator trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle: hydromechanically forced steered (dual-circuit system)

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 07/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: G400133 Ncedpfx Akey A Uxaocow Available immediately at our location in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Low-loader LANGENDORF SATÜ 30 – 10.0 m with wheel recesses Year of manufacture: 2020 Remote control 3 axles – 2 steered – 1 liftable Length: 13,900 mm Loading area: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: * Internal number: G400133 * Purchase price: €59,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €925.02 * Residual value: €11,380.00 If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), axle configuration: 3 axles, loading space length: 12,300 mm, loading space width: 2,540 mm, loading space height: 920 mm, total length: 12,300 mm, total width: 2,540 mm, total height: 480 mm, suspension: air, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = General Information Year of manufacture: 2012 Axle configuration Suspension: Air suspension Rear axle 1: Dual tires Rear axle 2: Dual tires Ncedpfx Aout Hnfekcsw Rear axle 3: Dual tires; Steering Weights Empty weight: 10,280 kg Payload: 33,720 kg Gross vehicle weight: 44,000 kg Functional Loading platform height: 45 cm Extendable superstructure: Yes Condition Technical condition: Very good Visual condition: Very good Financial information Price: On request Further information Please contact David F Middelman for more information.

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered Ncjdpfx Akoy Auh Iecsw * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request. Loading platform * Low-loader with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 1 pair of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying at the rear in the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-loader length. Gooseneck * Length approx. 3,900 mm * Gooseneck can be raised/lowered and extended hydraulically * Technical saddle load: 23,000 kg Rear chassis * Rear end in a short design with a closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half for accommodating the air tanks * 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 1 pair of lashing rings that can be folded outwards (LC 10,000 daN) Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF - brand of our choice * Load index (146/146F) Braking system * According to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * Made of high-strength fine-grain steels Nodpfxszm D Ucs Akcecw * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting * High-quality 2-component (2K) paint * Topcoat in a single color, RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * A spare wheel holder in front of the front bulkhead * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder. (± 5 kg) * Rear steering from the front and rear by means of a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector strip according to EU regulations on the side, on the extension and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum side ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * A splash guard at the rear of the trailer * European reflector signs (red-yellow) at the rear of the trailer * On the gooseneck and at the rear plate, one holder each on the left and right for the warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load pressure gauge for determining the axle loads including load diagram Incl. special accessories * Aluminum side and rear walls on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in end walls are removable. (Length of the superstructure approx. 2,560 mm). (± 46 kg) * A separate air connection with an air gun on the gooseneck * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for plug-in end walls, approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic conn

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Njdpfx Aksx Dzn Uocscw

Condition: used, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 06/2015, Equipment: ABS, Vehicle identification number: W09TS3011F0M49799 First registered: June 16, 2015 DE HU due Own weight: 10,380 kg Fifth wheel load: 24,000 kg - Technical axle load 10,000 kg King pin 3.5" (replaceable) - Fifth wheel height: 1,350 mm Swivel radius at the front - 1,770 mm - rear 2,310 mm B-dimension on the trailer approx. 11,865 mm ----Cranking plateau: 3,655 mm Low bed length: 9,445 mm - Loading height: approx. 560 mm Low bed width: 2,750 mm TELESCOPIC by 3,500 mm Ncodpfsrm Dr Eex Akcjw CAN BE EXPANDED BPW axles - Drum brakes, Air suspension - lifting and lowering device with total stroke approx. 200 mm 3rd axle: as friction-steered trailing axle with electrical and mechanical lock Hydraulic steering with pump unit on front wall Central lubrication system Tires: 235/75 R 17.5 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply.