Roll off trailer

HÜFFERMANN 2-achs Abrollanhänger HSA 18.70 Containeranhänge

Condition: new, maximum load weight: 10,420 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,550 mm, loading space height: 1,030 mm, loading space volume: 20 m³, total width: 2,550 mm, total height: 1,030 mm, Equipment: ABS, WhatsApp: We have the largest selection of HÜFFERMANN roll-on/roll-off trailer models in Southern Germany, readily available in stock! ALL TRAILERS ARC-GALVANIZED!!!!! 2-AXLE CENTRAL-AXLE MINI-CARRIER TRAILER - "HÜFFERMANN" MULTIFIX For transporting roll-off containers according to DIN 30720 Weights Gross weight (permissible) 13 t Gross weight (technical) 13 t with support load 1 t Dimensions Frame length approx. 4,000 mm, for a roll-off container up to 20 m3 Overall width max. 2,550 mm Container mounting height (in driving position) approx. 1,030 mm Frame Type HTM-3 1340 with Safetyfix brackets, single-tired Welded steel frame construction made of high-strength steel Chassis for roll-off containers for rear loading Combined load securing system, lateral centering device, At the front, a pair of locking wedges with pivoting shoes On the side of the frame, anchor eyes for lashing chains Prepared for chainless load securing "Multifix" Closed steel sheet floor, between the longitudinal beams Frame attachments 1 pair of lashing points for a stacked roll-off container 4 pairs of screwable 6.3t lashing eyes on the outer frame Roll-off container securing system Multifix for a roll-off container Chainless load securing system Multifix for a roll-off container on the mini-carrier without tipping equipment Drawbar Welded drawbar with screwable 40 mm drawbar eye, adjustable/height-adjustable +/- 200 mm Support system At the front, 1 piece of mechanical steel support jack with hand crank, single-side operation on the left, 1 drop-down support at the rear Axles 2 BPW axles with disc brakes ø370 mm, load capacity 7 t/axle, for "E" Tires Axle spacing 1,260 mm Wheels 4 tires 285/70 R 19.5, 143M CONTINENTAL 4 steel rims 8.25 x 19.5 silver Braking system/suspension Braking system according to EC directives 71/320 or ECE R13 Dual-circuit pneumatic braking system Braking system manufacturer according to factory selection EBS system 2S2M, 2nd axle sensored Gbodpfsi Aimrjx Aaisp Electronic braking and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on the 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Mounting for EBS and electrical plug on the drawbar Air suspension with raising and lowering system Automatic adjustment to driving level from 15 km/h Assistance/safety systems Weight recognition/axle load display via EBS-CAN bus signal for display on the dashboard in the driver's cabin (truck must be prepared accordingly, no calibrated scale) Lighting/electrics 24-volt lighting system according to EC directives 76/756/EEC 2 full-LED module tail lights, "manufacturer Hella" 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled via the turn signal LED license plate lights, integrated in the tail light Fixed connection cable with 1 x 15-pin plug 2 additional LED reversing lights, mounted at the rear left and right Paintwork Automatically blasted, arc-galvanized, primer on epoxy resin basis, Painting with 2K topcoat in electrostatic process Material overlaps and transitions preserved with creep wax Chassis = RAL 9005 deep black Load securing elements = RAL 1003 signal yellow Drawbar/drawbar in chassis color = RAL 9005 deep black Wheel hubs black = powder-coated Underrun protection = galvanized Side underrun protection = anodized Plastic parts black, unpainted

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power socket * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection bumpers * Mechanical drop supports at the rear ----Container / Lowbed Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide the roll containers * Steel floor with wheel recesses in the bogie area * When transporting roll-off containers: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanically insertable guide angles at the front of the tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoting stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements to secure skips by force and form closure * 4 cloverleaf-style lashing cleats per side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the run-up area of the ramp * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) Gsdpotplv Tjfx Aaiebp ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape at the sides & rear * Axles, slewing ring, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Permissible gross weight technically possible: 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and interim sale subject to change ----Delivery Time: * Available from approx. week 47/2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: Godpfjl Thwcox Aaijbp * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, maximum load weight: 14,904 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 1,050 mm, Year of construction: 2026, Equipment: ABS, WhatsApp HÜFFERMANN HAP 20.72 MultiCarrier Full Option, arc-galvanized!!! Features: Permissible total weight: 18 t Technical total weight: 20 t Unladen weight: approx. 5,096 t (+/- DIN tolerance) Dimensions Frame length: approx. 7,200 mm, container internal length 6,000 – 7,000 mm + wheel vehicles Maximum overall width: 2,550 mm Container resting height (in driving position): approx. 950 mm Type HPA 2072, twin tires Welded steel frame construction made from high-strength steel S700 Chassis for rear loading Load securing with pneumatic low-tension lock with 4 claws, Clamping force 2.5 t per claw, operation on the trailer, left side in direction of travel 1 removable roller stop as variable container stop Integrated lashing rail on the outer frame for screw-in lashing rings 6 pairs of lashing holes in the front area of the outer frame Rear bevel cut with ramp stowage compartment incl. steel plate cover Low-maintenance, sealed ball-bearing slewing ring Hanging rail for aluminum loading ramps (WITHOUT RAMPS) 2 pairs of 5 t lashing rings welded on at the front of the platform, embedded in the floor at the rear! 8 pairs of bolted 3 t lashing shackles evenly distributed on the outer frame Towing Equipment Telescopic drawbar, adjustable 6 x 100 mm, with 40 mm DIN eye, straight towing eye, D-value 125 kN, for twin-tyre chassis Drawbar retaining spring with tensioner Truck coupling height from 635 mm to 835 mm Drawbar length: 2,000–2,600 mm BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, load capacity 10 t/axle, 17.5" twin tires, automatic slack adjusters 8 tires 235/75 R 17.5, 141J 8 steel rims 6.75 x 17.5, with offset, silver Black plastic wheel nut covers Brake system according to ECE-R13 Two-line compressed air brake system Brake system manufacturer Wabco EBS system 4S3M, sensors on 1st & 2nd axle Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP Spring-actuated parking brake on 2nd axle Aluminum air tank Brake/air supply lines with Duomatic quick coupling EBS/ABS connection cable Bracket for EBS and electric plug at the drawbar Air suspension with lift and lower function, separately operated front and rear via 2 rotary lever valves Automatic setting to programmed ride height above 15 km/h Schwarzmüller Intelligent Telematics Weight detection/axle load display via EBS CAN bus signal, display in truck cabin (Truck must be suitably equipped, not for calibrated weighing) Tire pressure monitoring according to ECE-Regulation 141, with pressure sensors in wheels Acoustic reverse warning system/signal, activated via reverse gear 24-volt lighting system according to ECE-R48 Fully LED multi-chamber tail lights "Aspöck EcoLED III" LED position lights at front LED outline marker lights at rear LED side marker lights, operated via indicator signal LED license plate lights 1 x 15-pin connection cable 2 LED work lights, mounted left and right under the outer frame 2 LED reversing lights, mounted at the rear left and right 7-pin socket at the rear Paintwork Machine blasted, arc-galvanized, epoxy primer, coated with 2K topcoat using electrostatic process Material doublings and transitions preserved with cavity wax Chassis = RAL 9005 deep black Gedpoyh Sl Dofx Aaisbp Load securing elements = RAL 1003 signal yellow Drawbar/tow bar in driving pos...

Condition: used, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 12/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, total width: 2,550 mm, total height: 1,100 mm, Year of construction: 2018, Equipment: ABS, tail-lift, FLIEGL ZPS200K combo trailer for hooklift containers with external rollers, 5,500 mm – 7,000 mm, 2x 10m³ skip containers and construction machinery transport. German trailer, first owner. The "ZPS200K Kombi low-loader" is particularly suitable for alternating transport of construction machinery, roll containers, and skip containers. Low-loader 2-axle design for 20t permissible gross weight. Low loading height of 1,030mm. Lowerable turntable/chassis drawbar for transporting 2 skip containers. Gbjdpfxoy Hd Rgs Aaiop

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Brake system: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lower system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable-height coupling ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General accessories: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Container net storage box made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable A-sign at the rear ----Loading platform: * Main frame with raised outer rails for guiding roll containers * Steel floor plate with roller recesses in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp lock as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the slope area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead support * 3 pairs of 10 t UVV lashing rings on the side in the outer frame * Each side: 4 x 2 t cloverleaf-type lashing eyes Gbodsl Tq Nmspfx Aaiop * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking components, rear drop supports hot-dip galvanized * Drawbar, axles, and air tanks painted in black tone ----Info: * New vehicle without initial registration, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 43 / 2026

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: Gsdpfx Aewb Rakoaiebp * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Gsdpevynaajfx Aaijbp Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * Tire pressure monitoring system (TPMS) ----General attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers Gjdepk D Awepfx Aaiebp * Mechanical drop supports at the rear ----Container / Low loader platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Suitable for transport of roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking and mechanically insertable stop angles at the front in the guide rails * Loading certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 adjustable skip stops for lateral centering; the front 4 stops are inserted with a pendulum stop ----Load securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and frictional securing of skips * 4 cloverleaf lashing slots on each side and 1 pair of 13.4 t UVV lashing rings facing forward * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Technically permissible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. calendar week 47/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye & height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Toolbox made from powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical pin-in end stops at the front of the rails * Load certification to DIN 30722 - 1 * Transport of up to 2 skip containers with a max. volume of 10 m³ each possible * Includes 8 repositionable skip stops for lateral centring of the skips, front 4 stops with pendulum stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in tensioning elements for both positive and non-positive securing of the skips * 4 lashing bars in cloverleaf design (on the sides) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: Gjdopk D Iiopfx Aaiebp * Welded seam as anti-slip surface in the ramp track area * 1 pair of aluminium loading ramps (16 t / pair) 2,800 x 400 mm suitable for rubber-tyred and chain-driven vehicles (lockable storage compartment access from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape on the sides & rear * Axles, turntable, drawbar, and air tank painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 47/2026