Interchangable body

Hangler LKW Tieflade Liftmaster Aufbau für 4 Achs LKW Fahrgestell zum Transport von Arbeitsbühnen

Condition: used, Year of construction: 2023, operating hours: 1,742 h, power: 250 kW (339.91 HP), Equipment: air conditioning, cabin, front power take-off, onboard computer, T 7.340 AUTO COMMAND HD PLM New Holland Tractor - ELITE: Maximum efficiency through automation and innovative features. Efficient stepless AutoCommand transmission (optional 40 km/h Eco or 50 km/h Eco). Electrohydraulic control units and high-performance hydraulics (165 l/min or 220 l/min optional). Four-speed PTO: 540/540E & 1000/1000E. Fpsdpfeyk I Nysx Ab Asp - Manually telescopic, electrically adjustable rearview mirrors with wide-angle function and mirror heating. - 680 mm pivoting front mudguards. - Rear mudguard controls on both sides (EHR, PTO, 1 configurable rear remote valve, engine speed memory, and engine stop). - Wide rear fender extensions (240 mm). - Electronic key and electronic start button on the right fender (immobilizer, electric door lock). - Cab without right door (emergency exit only). - Hydraulically suspended cab (hydraulic suspension with three-stage adjustment via terminal). Park lock Horizon Ultra Cab: - DYNAMIC COMFORT cab specification: DYNAMIC COMFORT air-suspended seat with DDS low-frequency suspension, automatic weight adjustment, dynamic damping, seat heating, passenger seat in leather, leather steering wheel, floor mat with NH emblem, automatic climate control, and ambient cab lighting. - Special BLUE POWER paintwork, air conditioning, passenger seat. - Rear wheel weights 1000 kg (4 x 250 kg). - Front linkage management incl. electric front outlets (7 and 3-pin 12V, 30A plug sockets). - Front linkage with 2 additional front lines for mid-mount valves. - Intelligent Trailer Brake System (ITBS) and steered axle control when reversing; programmable cab suspension. - Air supply system and two-line brake valve. - HD drawbar with integrated K80 ball. - Automatic quick-adjust trailer hitch, 38 mm pin. - Power Beyond adapter plate without couplers. - Extended joystick (can control up to 6 valves; 2 assignable keys, immobilizer buttons, forward and reverse buttons, range shift). - 2 electronically controlled mid-mount valves. - 5 electronically controlled rear valves (color-coded, configurable). - Hydraulic lower link stabilizers. - Rear hitch Cat. 3 with two external lift cylinders (120 mm), quick hitch hooks, ball holders, hydraulic top link, and remote cab door lock. - High-flow hydraulic pump 220 l/min. - Suspended and braked front axle CAT. 4.75. - Additional 1 3/4'' 20-spline PTO stub shaft. - Four-speed rear PTO: 540/540E/1000/1000E rpm with electronic speed change, (optional) front axle suspension. PTO stub shaft with 6 splines fitted + 21 splines (1 3/8'') supplied. - HD high-performance brake discs on rear axle. - Flanged axle 2490 mm (98''). - Standard permissible gross weight 16,800 kg. - Electronic park lock. - Auto Command – stepless transmission 50 km/h ECO. Intuitive touchscreen monitor. - Preheating system. - Main and auxiliary fuel tanks without tank protection. - Viscotronic fan & Tier 5 engine. - Tire brand: MICHELIN. - IntelliView 12 (HTS 2 headland management optional), IntelliSteer & PLM autoguidance, Power Beyond ISOBUS Class II or II.

Condition: used, mileage: 4,227 km, power: 66 kW (89.73 HP), first registration: 03/1984, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: green, gearing type: semi-automatic, number of gears: 6, number of seats: 5, Number of doors: 4 Fpedpfouu T I Uex Ab Ajp Number of cylinders: 6 Empty weight: 4,550 kg Gross vehicle weight (GVW): 4,550 kg Maximum speed: 78 km/h Interior: black Number of keys: 1

Condition: used, functionality: fully functional, Year of construction: 2014, Ferri brush cutter arm, model TP61 Farm Year of manufacture: 2014 Ferri mulching head model TI 120 (width: 1200 mm) Three-point linkage for agricultural tractor (recommended tractor weight: at least 5,000 kg) Manual lever controls Road lights for signaling, fork-liftable, support legs Fpsdey Iwwiopfx Ab Aop

Condition: used, overall weight: 3,150 kg, operation weight: 3,150 kg, maximum load weight: 3 kg, Year of construction: 1955, maximum speed: 30 km/h, First registration: 06/01/2026. We are selling one restored Mercedes-Benz Unimog U 401 vintage vehicle from the 1955 model year. Slightly oily, otherwise in very good condition. 25 hp, unladen weight 2150 kg, payload 1000 kg, permissible total weight 3150 kg, all-wheel drive, 25 hp diesel engine OM636, tire size 6.50x20, trailer hitch, convertible top, displacement 1767 cc, 30 km/h. Further details are available upon request. Storage location: 94491 Hengersberg. Fodpfjtrqu Ejx Ab Aopp

Condition: used, Year of construction: 2020, operating hours: 5,035 h, Internal vehicle number: VTC30051 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova CAT 330 crawler excavator with OilQuick – 30.8 tonnes – 5,035 operating hours German CAT 330 crawler excavator, manufactured in 2020, with 5,035 operating hours. The machine has an operating weight of 30,800 kg and is equipped with a CAT C7.1 ACERT engine and a hydraulic OilQuick quick-change system. Technical data: Fpodpfx Aozwitxsb Aep * Vehicle number: VTC30051 * Vehicle condition: Used machine * Category: Crawler excavator * Manufacturer: Caterpillar * Model: CAT 330 * Year of manufacture: 2020 * Operating hours: 5,035 hrs * Operating weight: 30,800 kg * German vehicle Engine and hydraulics: * CAT C7.1 ACERT diesel engine * Hydraulic drive * Hydraulic lines on the boom * Auxiliary hydraulics for attachments * Hydraulic OilQuick quick-change system Equipment: * OilQuick quick-change system * Crawler undercarriage * Enclosed operator’s cab * Cab protection grille * Work lights * Rearview mirrors * Generous access panels for maintenance Information about the OilQuick quick-change system according to the nameplate: * Manufacturer: OilQuick Deutschland GmbH * Hydraulic quick-change system * Year of manufacture: 2020 * Designed for carrier machines up to a maximum of 45 tonnes * CE marking available The hydraulic OilQuick quick-change system enables quick changes of suitable attachments directly from the operator's cab. Use is permitted only with matching OilQuick adapter plates of the same size and in accordance with the manufacturer's instructions. Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number:

Condition: new, Year of construction: 2026, Equipment: lighting, K.T.S. forestry trailer, 7.0 tons, complete with XE 6.4 m crane Year of manufacture: 2026, new, with 12 months warranty - with hydraulic extension of 1.2 m - wide-angle joint (comfort handle) on the crane - telescopic support legs - 7-spool control valve with separate levers - 0.18 m2 grapple and 3-ton rotator - 4 x swivel cylinders - center frame made of 140x140x8 mm tube - 4 x pairs of stakes - telescopic frame extension + 800 mm with 1 x pair of stakes - foldable crossbars for taillight, license plate lighting - adjustable parking stand with crank - 2 x chock blocks - overrun brake, 1 axle with handbrake - 2 hose rupture valves for the telescopic support legs - Finn Rotor control valve with 3 functions in each lever - PTO hydraulic pump - gearbox - oil tank Fpjdpfjyv T Rzex Ab Aop - PTO shaft - crane winch with wireless remote control - approval according to § 21 STVO, road approval, 25 km/h from location Warmensteinach

Condition: new, empty load weight: 14,350 kg, maximum load weight: 53,450 kg, overall weight: 67,800 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel, approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform and into the bevel to accommodate the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm Fjdpfjya E A Nsx Ab Ajpp Two-Part Steel Ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps individually hydraulically movable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" 25 mm rubber floor and steel plate floor approx. 5 mm as additional reinforcement on the platform bevel - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - BPW axles and suspension, 1st axle steerable, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire pressure sensors installed in all wheels including spare wheels Surface Treatment: - Complete steel construction blasted automatically with a shot blast machine after welding - Second shot blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure best corrosion protection - Final painting with 2 coats of 2K topcoat, single color in MB 7350 Novagrau Accessories Included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches - 1 spare wheel - Outer beam on gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of lying lashing rings at the rear of the gooseneck - 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized - 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor over the gooseneck, tread plate covering over the king pin - 2" king pin - Round NATO socket on the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm in front of the axles, continuously open up to the gooseneck crossmember, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between the first and second axles, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Fsdpfji Riytex Ab Ajpp Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: used, Young used trailers from our large rental fleet! Used car trailer, twin axle, with aluminium side panels Fpodpfx Aey Na Awsb Aop Manufacturer: Hapert Model: Azure L-2 Perm. total weight: 2000 kg Unladen weight: approx. 430 kg Payload: approx. 1570 kg (payload figure may vary depending on equipment and design) Internal dimensions: 3000 x 1500 x 400 mm (L x W x H) Tyres: 185R 13 Designed hinge system for easy attachment of load securing nets Multiplex wooden floor with 15 mm anti-slip surface TÜV-certified and integrated load securing system Bolted V-drawbar Fully welded, hot-dip galvanised chassis Solid foldable jockey wheel Removable 40 cm high front grill for transporting long materials Aluminium side panels Aluminium tailgate with HAPERT locking system First registration: 02.05.2025 Workshop inspected New TÜV possible on request Possible further options and accessories for this trailer: - Rear supports - Anti-theft device - Load securing net

Condition: used, Year of construction: 2016, Equipment: cabin, Ref: 7556 Precise working width: 7.5 m Working width: 8 m Fjdpfozvq N Sjx Ab Aspp Delivery time (in days): 1 Hydraulic folding