Low loader semitrailer

Nooteboom Euro-54-03, Schwanenhals abfahrbar, Hydr.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WGOTHPE4560028329, overall weight: 102,000 kg, suspension: hydraulics, color: yellow, Year of construction: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical specifications according to original TÜV inspection report: - Max. speed: 80 km/h - Fifth wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Gross trailer weight: 102,000 kg (at 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Max. fifth wheel load: 30,000 kg - Kingpin: 3.5" - Design for direct coupling of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height: approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED BRIDGE - Payload: 67.75 t - Extendable: 6,000 – 14,000 mm - Central beam permanently mounted on rear 4-axle bogie - Claw coupling at the front - Central beam width: 1,350 mm - Inner beam width: 600 mm - Construction height: 440 mm Psdpewzl Nmefx Aglerd - Loaded loading height: 650 mm (ground clearance 210 mm) - Width adjustable from 2,750 mm to 3,250 mm - Sliding tables (Weight 405 kg) - Folding widening floor panels (Weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height: approx. 1,140 mm (+400 / -200 mm) - Central lubrication Beka-Max Good condition – German vehicle from first owner – available at short notice from stock in Kirchheim unter Teck – further information on request.

Condition: used, axle configuration: > 3 axles, first registration: 03/2016, total length: 16,260 mm, total width: 2,750 mm, total height: 3,780 mm, suspension: hydraulics, tire size: 285/70R19.5, wheelbase: 14,560 mm, color: green, Year of construction: 2016, Equipment: ABS, Belgian registration. Pendel axle. Wide marker boards. Wideners. Loading bed: Length: 685 cm + 425 cm. Pedswyiqlepfx Aglsrd Width: 274 / 320 cm. Height: 45 cm. Wireless remote steering. Operates via tractor unit hydraulics. Max technical weight: 81,500 kg. Unladen weight: 24,470 kg. = Further Information = Axle configuration Tyre size: 285/70R19.5 Brakes: Drum brakes Suspension: Hydraulic suspension Front axle 1: Twin tyres; Steering; Left inner tyre tread: 30%; Left outer: 30%; Right inner: 30%; Right outer: 30% Rear axle 1: Twin tyres; Steering; Left inner: 60%; Left outer: 60%; Right inner: 60%; Right outer: 60% Rear axle 2: Twin tyres; Steering; Left inner: 50%; Left outer: 40%; Right inner: 40%; Right outer: 60% Front axle 2: Twin tyres; Steering; Left inner: 60%; Left outer: 60%; Right inner: 60%; Right outer: 60% Weights Empty weight: 24,470 kg Payload: 57,030 kg gross vehicle weight: 81,500 kg Financial Information Price: On request Identification Model number: GigaMax STBZ-4VA 1+3 PENDLE / EX = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN) | Wouter Greutink (NL-DE-EN-ES-IT) | Russian spoken. We strive to provide accurate information, but no rights can be derived from the displayed texts.

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon available vehicles, on our website. Partial equipment list. Full specification available upon request. Loading Platform: * Low bed with external beams, extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood flooring, about 40 mm thick, with mechanical locking system * Service lines are protected within the extendable beams and automatically adjust to the corresponding low bed length Prjdpfxexarl Nj Aglsd * 5 pairs of lashing rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear Chassis: * Rear chassis in short version with closed outer frame and checker plate cover * Chassis equipped with excavator trough, closed in the rear half to house air tanks * 2 pairs of lashing rings, foldable outward (LC 5,000 daN) * 1 pair of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, flat-mounted, on the front & rear of the chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Manufacturer of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via standardized EBS interface according to ISO 11992 * For correct display, the truck must be capable of transmitting and displaying this data Braking System: * Braking system compliant with EU regulations, with EBS-E (2S2M) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection rail with sockets 24N, 24S & 15-pin, compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: * Complete steel structure automatically shot-blasted after welding using a Grit Wheel System * Second blasting with corundum for optimal coating adhesion * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with two layers of 2K topcoat, solid color in RAL 3002 carmine red as per RAL system 841GL * Wheels in silver * Rear section metalized and coated in RAL 9010 (pure white) * Metallic paint not possible * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push-buttons, with single-track control of axles (without installation on tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 40' container on the...

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed Prodpfx Agev Sw E Aslod * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, maximum load weight: 45,400 kg, overall weight: 66,000 kg, axle configuration: 3 axles, first registration: 08/2012, total width: 2,750 mm, Equipment: ABS, You will find our complete range of immediately and shortly available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Equipment: * BPW axles, all axles hydraulically steered * 245/70 R 17.5 tyres * Stake pockets, lashing rings * Removable loading bolster * Aluminium insert floors Pjdpfx Agjxuchkjlord * Hydraulic axle compensation * 2-inch kingpin * ABS * Tractor unit with hydraulics required * Additional steering * Detachable neck * Folding extensions * Small loading ramps at the front of the bed * Sideboards on the neck

Condition: used, mileage: 46,284 km, power: 294 kW (399.73 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, operating hours: 2033 ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7- color display and navigation, LGS IV, two engine variant with built-in engine JCB 129 kW level 3b, front disc brush - sideways shiftable, double-sided sweepings pickup, HD washing system 200 bar, hydraulic suction hose boom at the rear, gross volume 9 m³, water system approx. 4320 liters, weed brush preparation, container 9 m³ volume, built-in engine JCB 129kW/level 3b, feeder brush fixed 5 x 1300mm, total water volume 4320 liters, fuel tank 350-400 liters, coated suction nozzles double-sided, 15m hose reel, 200 bar 106l/min, rear area observation, rear suction hose Pedpfx Aet Hcfgeglerd

Condition: used, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 06/2008, Equipment: ABS, Vehicle Identification No.: WG0STZV3580032213 First registered: June 4, 2008 German vehicle inspection due Prodpjtpr E Tofx Agljd Own weight: 17,500 - 21,000 kg Removable gooseneck King pin 3.5" ----Lowbed length: 7,800 mm - Loading height: approx. 470 mm Telescoping by 4,900 mm Extendable WHEEL HOLDS Chassis: 4,100 mm Excavator recess - Digger arm recess Central lubrication system BPW Eco axles with drum brakes with radio control 3 x hydraulically steered axles Axle loads: 3 x 10,000 kg Removable gooseneck - Fifth wheel load: 24,000 kg Tires: 235/75 R 17.5 Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under the law of purchase. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, mileage: 59,391 km, power: 294 kW (399.73 HP), first registration: 10/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, operating hours: ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7-color display and navigation, LGS IV, two engine variant with built-in engine JCB 129 kW level 3b, front disc brush - sideways shiftable, double-sided sweepings pickup, HD washing system 280 bar, hydraulic suction hose boom at the rear, gross volume 9 m³, water system approx. 4320 liters, weed brush preparation, container 9 m³ volume, built-in engine JCB 129kW/level 3b, feeder brush fixed 5 x 1300mm, total water volume 4320 liters, fuel tank 350-400 liters, coated suction nozzles on both sides, 15m hose reel, rear area observation, rear suction hose Predpfx Ajt Hcftjglod