Low loader semitrailer

GOLDHOFER 3-Achs SPZ-DL3-38/80 Spezial 20,5meter + 3xLenk

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 12/1997, Equipment: ABS, Goldhofer 3-axle special trailer / long material transporter Type: SPZ-DL 3-38/80 Permissible total weight: 48,000 kg Permissible front axle load: 18,000 kg Permissible rear axle load: 30,000 kg Air suspension + 3 x STEERING axles Total length: 20,500 mm ! German registration ! For further dimensions, please refer to the drawing, which can also be sent in high-resolution PDF format upon request. ! More information upon request via email ! Information provided without guarantee/errors excepted! Lsdpfewq Ai Njx Ahzota Information provided on the internet is non-binding descriptions and does not constitute warranted characteristics. The seller is not liable for errors, input mistakes, and data transmission errors. Subject to changes. Constant buying and selling as well as trade-in and rental of crane and lifting vehicles as well as construction machines and heavy-duty vehicles.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... Lsdpfsfi Nmuex Ahzeta +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: new, maximum load weight: 30,020 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,566 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, H&W Walkingfloor semi-trailer 70m³ agricultural Availability: approx. 5 months from receipt of order Moving floor system: Ltedpfogimytox Ahzoa # 15-board system # Radio remote control # 10mm grooved floor boards # Hydraulic connections on the bulkhead & at the support winches Superstructure: # 30mm aluminum hollow profile body # Side walls continuously welded (grain version) # 2 crossbars # Integrated grain outlet # Rear plate of the floor system folds downwards # Door beam can be swiveled and operated from below # Cleaning door in the front wall on the left # Rear viewing window Chassis & axles: # SAF axles with 22.5 inch disc brakes # Wabco EBS 4S/2M brake system with RSS # Wabco ECAS air suspension system # 6 x brand tires 385/65 R 22.5 on steel rims in silver # 1st & 3rd axle as forced steering axle Tridec # Galvanized steel chassis # Chassis color: Hot-dip galvanized Further equipment & accessories # Aspöck 24V lighting # 4 x LED work lights switched via reverse gear # Aluminum single ladder 3.00m

Condition: new, functionality: fully functional, machine/vehicle number: XPNK0C200PD101865, first registration: 08/2024, next inspection (TÜV): 08/2026, loading space volume: 77 m³, Year of construction: 2024, Technical data: - Saddle height: 1,250 mm / 1,350 mm - Outer length: 12,095 mm - Volume: 77 m³* - Outer width: 2,550 mm - External height: 3,950 mm - Front overhang: 1,495 mm - Support leg spacing: 2,350 mm - Wheelbase: 6,875 mm - Rear overhang: 3,725 mm - Number of axles: 3 - Tire size (standard): 445/65 R 22.5 - Maximum permissible axle load: 10,000 kg - 1st axle: Lift axle - 3rd axle: self-steering axle - Brakes: Drum brakes *Volume depends on the selected options Basic equipment: General - Aluminum vehicle frame for low unladen weight and high payload - Aluminum support leg construction with aluminum drop support legs - All aluminum cross members in heavy-duty design; the short cross members on the axles are the axles are inserted with steel U-profiles - Aluminum side walls consisting of a 3 mm inner side and a 2 mm outer side - The side walls are continuously welded on the inside over the entire height (for maximum strength and minimum soiling) - Hydraulic tailgate with 115 degree opening angle, integrated lighting and Grain pusher and 115 degree opening angle Ltsdpfxsun Iuis Ahzea - Operation via radio remote control - Body sanded, primed and painted in 2K paint - Two-year guarantee on paint and construction Attachment - The fifth wheel plate is built with a robust steel box construction for a maximum fifth wheel pressure of of 18,000 kg (12,000 kg approved / 18,000 kg technical) Loading space - Corrugated aluminum floor boards, 6 mm, 21 boards with aluminum and plastic end caps Wear strips Hydraulic floor drive with 3 cylinders that move 7 floor strips each; Equipped with pressure gauge and temperature protection - Automatically retracting moving partition wall, hydraulically operated by means of radio remote control Price on request Subject to prior sale and errors excepted Locations may vary Internal: S51573

Condition: new, Year of construction: 2024, machine/vehicle number: JW 2, Limited time only! Factory new jib winch 2,0 to original MAGNI --direct available-- NEW / unused / jib winch has never worked - lifting capacity 2,0 to - outreach 2,15 m Special price on request The winch is in our stock to visit at any time. The winch has CE certificate and documents. We deliver the complete MAGNI program, direct available, on stock ! We are official Westtech WOODCRACKER sales & service partner. We are official Dieci sales & service partner. We are official MAGNI sales & service partner. For any questions and help, please contact us at any time. Ltodpfsqx R Nlsx Ahzsa

Condition: excellent (used), axle configuration: > 3 axles, first registration: 04/2014, loading space length: 15,870 mm, loading space width: 2,520 mm, loading space height: 1,670 mm, total length: 15,870 mm, total width: 2,520 mm, total height: 1,670 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2014, Color: Blue Load capacity: 83,122 kg Loading floor height: 167 cm Manufacturer: Nooteboom Model: 0VB-102-06 Ballast Trailer VIN: XMR0VB000E0000166 Year of manufacture: 10-04-2014 Weights: - Kingpin load: 30,000 kg - Axle load: 10,000 kg - Total axle load: 60,000 kg - Gross vehicle weight (GVW): 90,000 kg - Unladen weight: 16,880 kg - Payload: 83,120 kg Dimensions: - Length: 15,870 mm - Loading floor width: 2,520 mm - Height: 1,670 mm - Kingpin height: approx. 1,350 mm Axles: - Axle brand: SAF - Hydro-pneumatic suspension - 1st axle: friction-steered - 2nd axle: rigid - Axles 3-6: hydraulic steering - Axles 1 & 2: liftable - Tyres: 385/65 R22.5, load index 164K Additional equipment: - NATO plug - Lashing rings - Stake pockets + stakes - Wooden loading floor - Hydraulic landing gear - Toolbox - Electro-hydraulic pump for trailer functions - Spare wheel + holder - Work lights - Rear bumper with integrated lights - 2.0" kingpin - Central lubrication system - Radio remote control = Further Information = Axle configuration - Tyre size: 385/65R22.5 - Axle make: SAF - Suspension: Air suspension - Rear axle 1: Lift axle; Max. axle load: 10,000 kg; steered - Rear axle 2: Lift axle; Max. axle load: 10,000 kg - Rear axle 3: Max. axle load: 10,000 kg; steered - Rear axle 4: Max. axle load: 10,000 kg; steered - Rear axle 5: Max. axle load: 10,000 kg; steered - Rear axle 6: Max. axle load: 10,000 kg; steered Weights - Unladen weight: 16,880 kg - Payload: 73,120 kg - GVW: 90,000 kg Condition Technical condition: very good Visual condition: very good Damages: none Other details For further information, please contact Stefan Schaapveld. Ltjdpjuu Hfajfx Ahzea

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side Ljdpfxegcw Rie Ahzsta contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: new, power: 160 kW (217.54 HP), fuel type: diesel, color: red, tire condition: 100 %, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 8259, Equipment: air conditioning, all wheel drive, cabin, pallet forks, 251.900,- Euro net - Special price! RTH 6.30 - new machine - with felling crane equipment Limited time only! MAGNI RTH 6.30 ... NEW - felling crane - - NEW / unused / has never worked before - year 2023 - 0 hours - power 160 kW = 218 PS - powerful 5,13 L Volvo diesel - engine - Stage 5 / Stage V - lifting capacity 6,0 to - lifting height 29,8 m - lifting reach 26 m then 500 kg capacity - or for example, lifting reach 21 m and then 1,0 to capacity - We would like to send you the load diagram. - 445/65 R 22,5 tires 100% good - extra double-way hydraulic line - radio with USB - quick changer with attachment device detection - hydraulic side tilt - automatic levelling - hydraulic-shear-telescopic stabilizers - touch screen display - overpressure cabin - 360° endless rotation - Liebherr rotary drive Ltedpfx Ahjqi Tczszsa - electronic load display - lighting according to StVZO - TÜV package + TÜV acceptance - 40 or 20 km/h road registration - with CE for Europe - incl. radio remote control - incl. basket remote control - incl. AC - air condition - incl. pallet fork FEM or floating Additional extras inclusive: - incl. all-round signal LED ligths - incl. extended radio remote control with saw function, pad support & drive - incl. 3x proportional individual control of the 3x saw function on joysticks - incl. front safety demolition guard - incl. mast openings closed - incl. mast scraper for the extensions - incl. saw software with transponder for Westtech CS750 Smart saw 251.900,- Euro net Special price ID-Nr. 8259 RTH 6.30 - new machine - with felling crane equipment Working basket, tree care basket, asbestos basket, roofer basket, winch from 1,5 - 6,0 to, extension boom winch 4,50m, traverse, hook, bucket, saw -> direct available Office 0049 (0) 5474 - 10 63 Mobil 0049 (0) 151 108 52 801 infoⒶfreker.de The machine is in our stock to visit at any time. The machine has CE certificate and documents. We deliver the complete MAGNI program, direct available, on stock !

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2013, loading space length: 10,990 mm, loading space height: 1,530 mm, Year of construction: 2013, Equipment: crane, = Further Information = Rear axle 1: Lift axle; Steerable Rear axle 2: Steerable Rear axle 3: Steerable Lifting capacity: 5,000 kg Lifting height: 22,000 cm Crane: PALFINGER 40001EL, year of manufacture 2013, mounted at the rear of the chassis Technical condition: very good Optical condition: very good Please contact Sales for further information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) MOB: Dutch (Available on WhatsApp and Viber) When paying by bank transfer, funds must be transferred to the bank account listed below. Always check the payment details as indicated on our website. If you have received different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) Ltedpfxsxapt Rj Ahzsa BIC/SWIFT: RABONL2U

Condition: used, functionality: fully functional, empty load weight: 8,300 kg, maximum load weight: 20,000 kg, axle configuration: 1 axle, first registration: 04/2001, next inspection (TÜV): 01/2025, loading space length: 7,050 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, tire condition: 90 %, ground clearance: 150 mm, color: blue, trailer brake: trailer braked, Year of construction: 2001, ORTHAUS 1 axle lowbed . Ltsdpfx Ahjxw Uaqszja Steering axle . Lifting loading floor . Gooseneck fix . Loading space 7050 mm . Coupling height 1250 mm .