Semi-trailer with walking floor

Knapen KX 770

Condition: used, axle configuration: 3 axles, first registration: 09/2024, total length: 12,010 mm, total width: 2,550 mm, total height: 3,950 mm, suspension: air, tire size: 425/65R22.5, color: white, Year of construction: 2024, Axle configuration Tyre size: 425/65R22.5 Axle brand: BPW ECO Air HD Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Weights Unladen weight: 8,860 kg Financial information Price: On request Gksdpfowrcu Iex Aaxod Further information For more information please contact Mark van der Steen or Bob Beukers.

Condition: new, power: 331 kW (450.03 HP), fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), TATRA Phoenix 4x4 as AGROTRUCK Agricultural tractor unit Switchable front axle drive transfer case with off-road reduction Gjdpfx Aovmvu Ssaxskd Allison fully automatic torque converter transmission Wheelbase 3,700 mm The following equipment was ordered ex works: - Tipping hydraulics - Tire pressure control system - K80 coupling - Fifth wheel coupling - Scharmüller shifting unit - Single tires - Fog lights - Headlight protection grille - Power take-off from engine and transmission - Cyclone air filter AGRICULTURAL TRUCK, AGRICULTURAL TRACTOR, LOF tractor, tractor

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts Godpfx Aefi Nmusaxjkd mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: new, maximum load weight: 30,020 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,566 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, H&W Walkingfloor semi-trailer 70m³ agricultural Availability: approx. 5 months from receipt of order Moving floor system: # 15-board system # Radio remote control # 10mm grooved floor boards # Hydraulic connections on the bulkhead & at the support winches Superstructure: # 30mm aluminum hollow profile body # Side walls continuously welded (grain version) # 2 crossbars # Integrated grain outlet Gkedjgimytspfx Aaxed # Rear plate of the floor system folds downwards # Door beam can be swiveled and operated from below # Cleaning door in the front wall on the left # Rear viewing window Chassis & axles: # SAF axles with 22.5 inch disc brakes # Wabco EBS 4S/2M brake system with RSS # Wabco ECAS air suspension system # 6 x brand tires 385/65 R 22.5 on steel rims in silver # 1st & 3rd axle as forced steering axle Tridec # Galvanized steel chassis # Chassis color: Hot-dip galvanized Further equipment & accessories # Aspöck 24V lighting # 4 x LED work lights switched via reverse gear # Aluminum single ladder 3.00m

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALUMINIUM construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINIUM, 140 mm frame height! (max. 39t) Axles and Suspension “Disc Brakes 22.5” Jost axle assemblies 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axles separately liftable with start-up aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tyres and Wheels 6 wheels with tyres 385/65 R 22.5 as per manufacturer selection, Alcoa aluminium rims DuraBright - 11.75x22.5 ET 120, kingpin bolted into a 10 mm thick plate Landing Gear Aluminium drop-leg landing gears, 2 x 10 t support load, for air suspension we use swivel feet Gkodpfx Aaefakkcexsd Brake System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with control at rear, aluminium air tank system, premium modulator Electrical System According to STVZO regulations with 2 LED five-chamber tail lights type Aspöck Europoint LED integrated in aluminium rear closure, 24 volt system with 1x 5-pin and 2x 7-pin sockets, side marker lamps in LED, 2 separate LED work lights at rear, 2 LED work lights at first landing gear height, 1 LED work light inside front left, operable from outside Body/Tipper Body "Body fully welded on the inside" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN. Aluminium body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on inside, floor as moving floor system laid on 140 mm ALU cross beams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in beveled version, flat rear wall in straight design with 2 ALU swing doors 50/30 mm, with 4 locking bars in welded ALU rear frame mounted in Teflon and stainless steel bearings, continuous reinforced ALU upper flange supporting ALU wall with "Kevlar tarpaulin for complete emptying, side brush seal, additional side Kevlar tarpaulin, integrated discharge chute with folding cover plate at rear left bottom, operable from outside, inspection window rear left, one sampling flap in each rear door (2 pcs.), service door front left Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles mounted on ALU square profiles with approx. 670 PE-HD sliding plates, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed parts at front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with sizes and type to be specified, operating pressure 190 to max. 240 bar, ALU end pieces welded into floor, electric control rear left with cable control in a lockable waterproof box, Accessories PVC mudguards with rubber mud flaps, ALU spare wheel carrier, side ALU underrun protection in folding version, 1 tool box approx. 800x460x430 mm in plastic, approx. 3.7 m ALU ladder, rolling tarpaulin 680 g/m² quality with rolling tarpaulin system incl. sides.

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: Gkedpfx Aohlz R Ssaxjd -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 1,100 kg, total length: 6,000 mm, total width: 2,400 mm, total height: 2,600 mm, insulation thickness: 50 mm, type of input current: three-phase, Container in stock and available immediately. Viewing and collection possible. In this offer we provide you with Villex Multi Cube Nero containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, residential containers, construction containers. Dimensions: 6.0 x 2.4 x 2.6 m Delivery: possible nationwide Standard features: Condition: New & assembled Exterior color: White + black (as in the photos) Outer walls: 50 mm thick Surface area: 14.40 m² Weight: 1000 kg 1x entrance door (205cm*105cm) 1x double window -> single-leaf, fixed glazing and includes tilt function 1x double roller shutter Electrics: 6x sockets, FL switch + fuse, surface-mounted cable (PVC) We manufacture your container individually according to your wishes! Optional requests at an extra charge: Customized dimensions e.g. 7x3m, 4x 2.4 m, double container, triple system and much more. Various window sizes Different colors Floor colors Gkjdjr Hpk Sepfx Aaxsd Practical forklift bags Air conditioning Lamp Roller shutter Heating WC, shower, toilet, washbasin kitchen Plastered interior walls And much more Deliveries are usually made with our own vehicles. Payment can be made in cash on delivery, to our driver or conveniently in advance via PayPal or bank transfer. The delivery time nationwide for standard containers in stock is approx. 1-2 weeks after receipt of order, depending on the zip code area. We manufacture and deliver customized containers within 1-4 weeks. Collection and viewing at Heta Naturstein, Dortmunder Str. 90, 59427 Unna by appointment, during business hours by telephone arrangement. Tel: 02303/9599920 & 0176/32229377

Condition: new, maximum load weight: 33,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, WhatsApp SCHWARZMÜLLER 3-AXLE STANK SEMI-TRAILER NEW VEHICLE AVAILABLE IMMEDIATELY!! Tractor data and equipment 4,500 mm maximum distance from tractor front edge to fifth wheel center 2,240 mm minimum free front distance from fifth wheel center 1,900 mm max. rear turning radius Total train weight (permissible) 44 t in front and rear traffic or with special permit Total weight (technical) 39 t Axle unit load (technical) 27 t Fifth wheel load (technical) 12 t Dimensions Frame length approx. 13,000 mm Total width max. 2,550 mm Loading height front+rear approx. 1,340 mm Semi-trailer horizontal position at approx. 1,150 mm Loading height approx. 1,510 mm Welded steel frame construction Lightweight frame made of high-strength fine-grain steel Straight frame design, all stakes on the frame mounted Frame height at the front approx. 190 mm (without stakes) Replaceable 2" kingpin Frame for fifth wheel height unloaded approx. 1,150 mm - approx. 1,250 mm, with air-sprung tractor unit Screen-printed plate cover 12 mm between the longitudinal members, screwed, extended at the front to approx. support winches (to protect the tractor unit) and at the rear above the chassis, flush with the upper edge of the longitudinal member Support winches, 2 x 12 t, one-sided operation on the right, thrust compensation, Reinforced cross brace, for loading/unloading when the vehicle is uncoupled 3x SAF-Intradisc-Plus integral axles with disc brakes ø430 mm (22.5" disc), Load capacity 9 t/axle, reinforced axle body, off-road version Axle spacing 1,310 + 1,410 mm Gsdpfx Aen Hrg Rjaxskd Axle lift on 1st axle, raises and lowers automatically depending on weight, with forced lowering and speed-limited starting aid for button operation in the driver's cab and operation via "3 x brakes" 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system as selected by the factory EBS system 2S2M, one axle sensed RSS - stability program Spring-loaded parking brake on 2 axles Aluminum air tank Brake/air connections with 2 individual coupling heads yellow/red EBS/ABS socket at the front Air suspension with lifting and lowering device Automatic adjustment to programmed driving level from 15 km/h Bellows diameter 360 mm SWIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" performance package Axle load display via EBS CAN bus signal for display on display in the driver's cab Extra-strong steel profile front wall approx. 2,500 mm high, with 2 stable center supports, corners beveled at the top approx. 300mm/45° Rail posts attached/replaceable, division: approx. 600 mm, then every 2,400 mm 6 pieces of Exte 144 stanchions, with screwed bracket clamp fastening Rail inclination approx. 0.8° inwards (also suitable for lumber transport) 6 pairs of Exte 144-S stanchions with screw fastening, 2-part telescopic stanchions, load capacity per stanchion pair max. 7t, coated in original signal color orange Telescopic key for operating the Stanchions Stanchion loading height = max. approx. 2,800 mm 8 gripper deflector plates approx. 200 mm long, between the stanchion posts, on the side 6 pairs of lashing hooks on stanchion posts 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 FULL-LED five-chamber tail lights "Aspöck" with integrated ballast 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal 2 license plate lights 2

Condition: used, Year of construction: 2023, Suction hose Perrot system, Ø150 mm, 5m Jurop vacuum compressor PNR 155 (15,200 / ltr) Plastic mudguard for Ber. Profi filling aid NW 200 front / swivel element rear Wedge flange slider 6 inch VL Wedge flange slider 6 inch / VR Bracket for Godpfxjr T Rfrs Aaxekd

Condition: new, maximum load weight: 32,600 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting timber and long materials. * Chassis length approx. 13510 mm (head frame-head frame) * Chassis width approx. 2540 mm (outer frame-outer frame) * Sturdy steel bulkhead approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminum stanchions * Steel floor 4/6 mm tear plate cover * Technically permissible total weight 43,000 kg * Unloaded ride height approx. 1400 mm with saddle height 1200 mm * Max. fifth wheel load approx. 16000 kg * 2" kingpin in accordance with SAE standard, interchangeable from below * 16x Optipa quick-release fastener system embedded in the outer frame and 8x as storage for stanchions distributed centrally over the entire length * 3x 9t axle with large disc brake and air suspension unit for 9t load capacity each Total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift first axle, automatic function, with starting aid * Smartboard/TIM/Infocenter Gkjdpfjn Hrrisx Aaxed * EBS brake system make Knorr or Wabco of our choice with Roll Stability program * Brand tires 385/65 R 22.5 * LED work lights * LED lighting system * 2x toolbox * CDP with zinc phosphating plus powder, maximum corrosion protection (only if powder paint is available) For further information please do not hesitate to contact us