Low loader semitrailer

Doll Panther S3E Tele / Swiss-Vehicle

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Kledpfx Afsk Af Svonou Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload weight: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis number: YAMT14XX4N0107629 Year: New and unused Weights/Loading Capacity: King-pin load: 23,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW: 71,000 kg Empty weight: 16,535 kg Loading capacity: 54,465 kg Axles: Axle brand: BPW Hydraulic steering Pneumatic suspension with lifting/lowering valve WABCO braking system Tyres: 245 / 70 R17.5 – Michelin (Load index 146/146 F) 1st lift axle Dimensions: Kedpfx Afjuu Hcfenjlu Loading length: 9,300 mm Extensions: 6,500 + 6,800 mm Loading floor width: 2,540 mm Loading height: 900 mm Additional Information: Loading floor, double extendable Container locks Outriggers in width + outriggers (wood) for extension in width Lashing rings Set of double folding loading ramps Central lubrication 1x spare wheel + holder JOST landing gear Electric system 24 Volt King-pin 2.0″ One galvanised steel headboard Electrically operated hydraulic pump Manual steering Twist locks = Further Information = General Information Year of construction: 2023 Axle configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle brand: BPW; Tyre tread depth left inside: 100%; Tyre tread depth left outside: 100%; Tyre tread depth right inside: 100%; Tyre tread depth right outside: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread depth left inside: 100%; Tyre tread depth left outside: 100%; Tyre tread depth right inside: 100%; Tyre tread depth right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread depth left inside: 100%; Tyre tread depth left outside: 100%; Tyre tread depth right inside: 100%; Tyre tread depth right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread depth left inside: 100%; Tyre tread depth left outside: 100%; Tyre tread depth right inside: 100%; Tyre tread depth right outside: 100% Weights Empty weight: 16,535 kg Payload: 54,465 kg GVW: 71,000 kg Functional Height of loading platform: 65,535 cm Extendable structure: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Ksdeg Sk Tvjpfx Afnslu Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height, loaded: 950 -> 1050 mm Rear overhang: 2,300 mm Extendable by: 3,400 mm Wheelbase: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading area: Extendable loading platform with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings, foldable outwards (LC 5,000 daN). 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t Load capacity (50t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). The trailing axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80 kg) Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color, in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories Yellow-red air couplings on the galvanized connection strip at the front. 2 chocks with holders. 2" King Pin A galvanized steel front panel approx. 2200 mm high. (± 105 kg) EN12642-XL Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) at the rear of the trailer. Loading area with approximately 38 mm thick hardwood floor. (± 320 kg) 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform. (± 30 kg) 1 spare wheel holder under the loading platform on the right side, in the direction of travel. Tires 435/50 R 19.5, at the manufacturer's choice. One mudflap at the rear of the trailer. Manual and description on a USB stick. One mounting for a rotating beacon at the rear of the trailer. On the swan neck and at the rear panel, left and right, one mounting each for warning signs including socket. One INOX tool box transversely under the loading platform (1000x400x2500) (± 135 kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90 kg) 4 pairs of WADER container locks. (± 60 kg) 10 pairs of galvanized plug-in rails approx. 100 x 50 mm, 1,000 mm high. (± 220 kg) 3 pairs of pocket rail strips, mounted transversely in the loading area, for plug-in rails 100 x 50 mm. (± 95 kg) S

Condition: used, empty load weight: 9,820 kg, maximum load weight: 35,180 kg, overall weight: 45,000 kg, first registration: 04/2014, next inspection (TÜV): 06/2024, loading space length: 9,500 mm, loading space width: 1,530 mm, suspension: other, tire size: 385/65 R 22,5, color: other, gearing type: other, front tire size: 385/65 R 22,5, driver cabin: other, emission class: none, Concrete internal loader, concrete internal loader, internal loader for concrete parts, Wheelbase (mm): 6640 to the end of the vehicle Ksdpfx Afsvv T S Tonolu * Support device * BPW half axles * Spare wheel * Drop support * Hydraulic suspension * Hydraulic axle compensation * Hydraulic inner swing arm * Platform length 2,950 mm * Pump unit * Drum brake * 6-way manual tensioning * Fully lowerable * Central lubrication system We expressly reserve the right to sell the vehicle prior to sale, as we also offer this item on other portals. Information on accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Pictures have been partially edited and are for initial viewing only. If you are interested, please contact us and request current pictures.

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Kljdpevw Hmtofx Afnou Further information on request.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Year of construction: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-Pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg GVW: 106,000 kg Empty weight: 23,480 kg Loading capacity: 82,520 kg Axles Brand axles: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steering 2nd axle rigid Axles 3 to 8 hydraulic steering Axle 1 & 2 liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-Pin height: +/- 1,280 mm Additional Information Operated on truck hydraulics Hydraulic operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin 3.5” Central greasing Markerboards oversize load Radio remote control = Further information = General Information Year of manufacture: 2009 Axle configuration Tire size: 235 / 75 R17.5 Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tires; Max. axle load: 10,000 kg; Steered Weights Empty weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading floor height: 96 cm Extendable structure: Yes Condition Technical condition: very good Optical condition: very good Ksdjwwkrlopfx Afnslu Financial Information Price: On request

Condition: excellent (used), axle configuration: > 3 axles, first registration: 08/1994, color: yellow, Year of construction: 1994, Equipment: ABS, = Further options and accessories = - Air suspension = Additional information = Axle configuration Rear axle 1: Twin tires Klodpfx Aeuxy Dfefnsu Rear axle 2: Twin tires Rear axle 3: Twin tires; Steering Rear axle 4: Twin tires; Steering Weights Unladen weight: 11,420 kg Functional Loading platform height: 77 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request NOOTEBOOM OSD-50-04-V SEMI LOW LOADER 4x SAF axles 2x steering axles (trailing) Air suspension Tyre size 205/65/R17.5 Extendable loading platform Length 923 cm + 670 cm extendable, total loading platform length 1593 cm Width of loading platform 275 cm + 2 x 27.5 cm side extension, total platform width 330 cm Height of loading platform approx. 77 cm when loaded Gooseneck length 388 cm Lashing eyes and stake pockets 2x rear supports FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: used, maximum load weight: 40,800 kg, overall weight: 53,800 kg, axle configuration: > 3 axles, first registration: 11/2012, next inspection (TÜV): 11/2025, Equipment: ABS, Faymonville 4-Axle Multimax STN-4AX Low Loader, extendable Klodpfxju Aynls Afnsu First registration: 11/2012 Unladen weight: 13,000 kg Gross weight: 53,800 kg Technically permissible: 55,400 kg Payload: 40,800 kg Kingpin load: 25,000 kg Tyres: 205/65R17.5 3rd and 4th axles with forced steering 4x SAF axles, 7,600 kg each, with air suspension Length: 13,475 mm up to 20,275 mm (extendable) Width: 2,540 mm up to 2,620 mm Height: 1,200 mm Further information available on request by email! Information is subject to change/errors excepted! Information provided online is for general description purposes only and does not represent a guaranteed specification. The seller is not liable for errors, input mistakes, or data transmission issues. Subject to modifications. Continuous purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction machinery and heavy-duty vehicles.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 265/70/19.5; twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Tyre size: 265/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Tyre size: 165/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Weights Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Ksdpfxjwifrds Afnolu Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED 1 AXLE IS LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMISSIBLE GROSS WEIGHT 48,000 KG TYRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE 515 CM LOADING PLATFORM WIDTH 255 CM LOADING PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS

Condition: used, axle configuration: 3 axles, first registration: 02/2001, total length: 13,350 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2001, Total length: 1,334 cm + 1,950 cm. Loading bed length: 915 cm + 1,950 cm. Loading height: 100 cm. = Further information = Axle configuration: Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tyres; Steered; Tyre tread left inside: 30%; Tyre tread left outside: 30%; Tyre tread right inside: 30%; Tyre tread right outside: 30% Rear axle 2: Dual tyres; Steered; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle 3: Dual tyres; Steered; Tyre tread left inside: 30%; Tyre tread left outside: 30%; Tyre tread right inside: 30%; Tyre tread right outside: 30% Weights: Unladen weight: 15,650 kg Payload: 29,350 kg Gross vehicle weight: 45,000 kg Kodpeycf Htefx Afnolu Financial information: Price: On request Identification: Type number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide correct information but no rights can be derived from the listed texts.