Used Kässbohrer Car Trailers for sale (142)

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads Rcodpfezydk Rox Ahksh CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: new, maximum load weight: 32,969 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,390 mm, loading space height: 1,690 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SKS.Y 27 m³ Steel Tipper Body | BPW | Lift Axle | Cramaro | NEW Vehicle Description: For sale is a new Kässbohrer 3-axle steel semi-circular tipper with a 27 m³ payload volume. This vehicle is ideally suited for the transport of sand, gravel, excavated material, and other bulk goods. Technical Data: Kässbohrer SKS.Y / K.SKS B / 27-12/27 * 3-axle semi-trailer tipper * Payload volume: 27.0 m³ * Permissible total weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Tare weight: approx. 6,031 kg * Loading length: 7,900 mm * Internal width: 2,390 mm * Overall width: 2,550 mm * Tipper body internal height: 1,690 mm * Saddle height: 1,220 mm * Overall length: approx. 8,675 mm * Vehicle height: approx. 3,430 mm Order_KB_254601-2 Order_KB_254601-2 Chassis / Axles: BPW AL II axles * 3 x 9,000 kg * Air suspension * Disc brakes * Lift axle on the 1st axle * Automatic EBS-controlled lift axle control * WABCO EBS 2S/2M * RSS stability control system * eTASC electronic/manual air suspension control * Automatic bellows discharge system when tipping * Tilt angle warning system in case of more than 3° inclination Rcsdpfoz Ec Snox Ahkeh * Cathodic dip-coated chassis * High-strength S700 MC steel Order_KB_254601-2 Order_KB_254601-2 Tires: 385/65 R22.5 * Premium European tire brand, as selected by Kässbohrer * M+S tires * Steel rims ET 120 * 6 wheels Order_KB_254601-2 Tipper Body: Steel semi-circular tipper body * 27 m³ volume * Front wall: 4 mm HB450 * Side walls: 4 mm HB450 * Rear wall: 4 mm HB450 * Floor: 4 mm TUF500 * Mechanical rear gate with double hinge * 2-fold compression lock * Rubber seal on the tailgate Order_KB_254601-2 Tarp / Hydraulics: Cramaro Cabriole Type C * Electric tarp system * Remote control * 300 mm arch height * 5-stage HYVA tipping cylinder * Max. working pressure 250 bar * Pneumatic operation * 2 m hydraulic hose Order_KB_254601-2 Additional Features: 2 work lights at the rear * Tire pressure monitoring system (TPMS) * Body-Fix system for stabilizing the tipper body * Plastic toolbox * 40-liter water tank * Document box * Folding aluminum underride guard * Aspöck Europoint III lighting * LED side marker lights * Automatic safety braking system when the tipper body is raised Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Color: Chassis: RAL 9005 Deep Black * Tipper body: RAL 9010 Pure White * Tarp: RAL 9010 Pure White We are available to answer any further questions you may have.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, total length: 8,000 mm, total width: 2,420 mm, total height: 1,300 mm, suspension: air, tire size: 385/65R22.5, color: red, Equipment: ABS, General information Year of construction: 2020 Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: disc brakes Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.190 kg Carrying capacity: 36.810 kg GVW: 42.000 kg Functional Tipper: Back Condition Technical condition: good Visual appearance: good Damages: none Product safety EU responsible: Truckcentrum Sliedrecht RIVIERDIJK 2 C 3361AP SLIEDRECHT, NL Additional information Please contact Arjan Kamsteeg or Rob Veldhuis for more information = Additional options and accessories = Rjdpfey Ergmjx Ahkoch - Air suspension

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Redpfx Ahsrukucskech Technical specifications: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Wheelbase: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight [80 km/h] 45,000 kg * Gross vehicle weight [60 km/h] 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * 3rd axle as self-steering axle * Wabco braking system * Tires: 445/45/R 19.5 Chassis: * Chassis made of high-quality, high-strength S700 MC steel, in accordance with ISO standards 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Front landing gear, folding outriggers at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 container locking devices * 1,500 mm high steel bulkhead with Code XL certification Accessories: * 1x stainless steel toolbox * Stake box Chassis color: RAL 3020 Traffic Red We are happy to provide you with further information.

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: Rcodpfxorukure Ahkeh * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: new, maximum load weight: 32,969 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,390 mm, loading space height: 1,690 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SKS.Y 27m³ Steel Tipping Body | BPW | Lift Axle | Cramaro | NEW Vehicle Description: For sale is a new Kässbohrer 3-axle steel semi-circular tipping body with a loading volume of 27 m³. The vehicle is ideal for the transport of sand, gravel, excavated material and other bulk goods. Technical Data: Kässbohrer SKS.Y / K.SKS B / 27-12/27 * 3-axle semi-trailer tipper * Loading volume: 27.0 m³ * Permissible total weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Tare weight: approx. 6,031 kg * Loading length: 7,900 mm * Internal width: 2,390 mm * Overall width: 2,550 mm * Tipping body internal height: 1,690 mm * Saddle height: 1,220 mm * Overall length: approx. 8,675 mm * Vehicle height: approx. 3,430 mm Order_KB_254601-2 Order_KB_254601-2 Chassis / Axles: BPW AL II axles * 3 x 9,000 kg * Air suspension * Disc brakes * Lift axle on the 1st axle * Automatic EBS-controlled lift axle control * WABCO EBS 2S/2M * RSS stability control system * eTASC electronic/manual air suspension control * Automatic bellows discharge system when tipping * Tilt angle warning system at more than 3° inclination * KTL-coated chassis * High-strength S700 MC steel Order_KB_254601-2 Order_KB_254601-2 Tires: 385/65 R22.5 * Premium European tire brand, at Kässbohrer's choice * M+S tires * Steel rims ET 120 * 6 wheels Order_KB_254601-2 Tipping Body: Steel semi-circular tipping body * 27 m³ volume * Front wall: 4 mm HB450 * Side walls: 4 mm HB450 * Rear wall: 4 mm HB450 * Floor: 4 mm TUF500 * Mechanical rear gate with double hinge * Double compression lock * Rubber seal on the tailgate Order_KB_254601-2 Cover / Hydraulics: Cramaro Cabriole Type C * Electric cover system * Remote control * 300 mm bow height * 5-stage HYVA tipping cylinder * Max. working pressure 250 bar * Pneumatic operation * 2 m hydraulic hose Order_KB_254601-2 Additional Equipment: 2 work lights at the rear * Tire pressure monitoring system (TPMS) * Body-Fix system for stabilizing the tipping body * Plastic tool box * 40-liter water tank * Document box * Folding aluminum underrun protection * Aspöck Europoint III lighting * LED side marker lights * Automatic safety braking system when the tipping body is raised Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Color: Tipping body: Blue * Cover: Red We are happy to provide you with further information. Rsdpoz Ec Uisfx Ahkjch

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings Rcsdpjtn Hlmefx Ahksh * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells * Ramp box Chassis color nova grey For further information please do not hesitate to contact us

Condition: used, axle configuration: 3 axles, suspension: air, tire size: 385/55/22.5, color: other, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Rsdpfx Ahez Dpknskech General Information Year of construction: 2024 Registration number: OV-29-JH Axle Configuration Tire size: 385/55/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Weights Unladen weight: 5,450 kg Payload: 37,550 kg GVW (Gross Vehicle Weight): 43,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 07/2027 Damage: none

Condition: used, maximum load weight: 33,450 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2024, Equipment: ABS, 3-axle tank semi-trailer KÄSSBOHRER, type STC 28/1-10/24 First registration 04/2024, German semi-trailer, first owner Mileage only 52,629 km Permissible total weight 39,000 kg Permissible saddle load 12,000 kg Unladen weight approx. 5,550 kg Wheelbase approx. 5,900 mm Saddle height approx. 1,200 mm Tank semi-trailer made of V2A stainless steel, material 1.4301 Insulation 100 mm Volume 28 cbm, with 2 baffle plates Discharge via outlet with butterfly valve, ending in the rear compartment 1 x filling dome/manhole DN 500, walkway around the dome Fixed access ladder, on the right side of the tank Aluminum short chassis Redpfx Ahezbwy Nekoch Mechanical landing gears JOST, 24 tons Wabco Trailer-EBS-E Type 4S/2M with RSS anti-roll protection BPW axles with disc brakes Tires 6 x 385/65 R 22.5, tread depth 10 to 12 mm Aluminum rims, polished 1st and 3rd axles are lift axles Access ladder on the right side of the tank with APOLLO pump, type Magnum L, self-priming centrifugal pump 3" in the rear compartment. Due to the special design of the Magnum centrifugal pump, the pump can also draw in a gas/liquid mixture. For the transport of liquid fertilizers, pesticides, urea, AHL, whey, etc. Pressure Hmax: 0-3 bar Flow rate Qmax 500 - 1000 liters/min. Free-fall connection RENTING is the new BUYING, with us, full-service rental is also IMMEDIATELY available.

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. Rcjdpfxjxwa Uyj Ahksh All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rcsdpfx Ahoz Am Evekjh Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.

Condition: new, functionality: fully functional, empty load weight: 6,495 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space volume: 60 m³, total length: 13,060 mm, total width: 2,530 mm, suspension: air, tire size: 385/65, tire condition: 100 %, ground clearance: 4,000 mm, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Rsdpfx Ajzcaauehkech Kassbohrer Silo 60 m³ – SSK 60 Silo for the transport of FLOUR, GRAINS, SUGAR, RICE, CEREALS, and PLASTICS Volume: 60 m³ Length: 13,060 mm Unladen weight: 6,495 kg BPW axles, 1st axle liftable 5 manway access points Storz end coupling Aluminum rims Pneumatic railing lifting system Electropolished discharge cone

Condition: new, maximum load weight: 35,442 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 16,550 mm, loading space width: 2,500 mm, loading space height: 1,350 mm, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Maxima extendable telescopic heavy-duty platform semi-trailer Immediately available TECHNICAL INFORMATION: - Fifth wheel height: 1,250 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 9,100 mm - Extension: up to 7,450 mm platform extension - Extension locking position: 500 mm Rsdpfx Ajlz Hliehkjch - Gooseneck height: 180 mm - Wheelbase: 8,130 mm - Axle spacing between 1st and 2nd axle: 1,360 mm - Axle spacing between 2nd and 3rd axle: 1,810 mm - Technical axle load capacity: 9 tonnes - Technical total axle load: 27,000 kg - Kingpin load capacity: 18,000 kg technical - Total width: 2,540 mm - Technical gross weight [80 km/h]: 45,000 kg - Technical gross weight [60 km/h]: 46,000 kg - Unladen weight ±3%: approx. 9,558 kg - Rear swing doors: 2,450 mm RUNNING GEAR: - Number of axles: 3 pieces - BPW axles with air suspension and disc brakes - The two front axles are fixed and the rear axle is steerable - Air suspension incl. 1 load gauge - Manually controlled lift axle for overloading protection (1st axle) - Wabco EBS 4S/3M braking system - Electro-pneumatic dual-circuit ABS system - Lighting system: 24V with 2 x 7-pin + 1 x 15-pin sockets - Tyres: 6 x 385/65 R 22.5 CHASSIS: - Chassis made of high-grade, high-strength S700 MC steel, according to ISO 1726 - 2 mm Omega-profile reinforced 30 mm hardwood floor - 2" kingpin with bolted connection - Mechanical telescopic landing legs at front, wind-up type, with 50 tonnes static capacity LOAD SECURING: - Lashing rings - Stake pockets - Detachable stanchions - Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft., and 1x45 ft. containers - Front wall made of steel, 1,500+500 mm high, with Code XL certification ACCESSORIES: - 1 stainless steel toolbox, dimensions: 1,000 mm x 500 mm x 500 mm (W x D x H) - Standard access ladder - Side underrun protection made of steel, according to Regulation 89/297/EEC - Stanchion box: 6 pcs, mounted to front plate - 2x2 oversize load signs with LED lighting - Rotating beacon COLOURS: - Chassis colour: RAL 3020 traffic red For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Kässbohrer Tank Container Chassis NEW | 20 ft | Also Available in 30 ft Version | from €23,500 New vehicle – customizable to your specific application. High-quality tank container chassis designed for the safe transport of 20-ft tank containers. Also available as a 30-ft version – configuration according to customer specifications possible. --- Highlights Rcjdpeypa Nvefx Ahkjh • Suitable for 1 × 20 ft tank container • Also available as a 30-ft tank container chassis • Very low tare weight (approx. 3,200 kg) • Robust, durable chassis with 10-year corrosion protection • Proven Kässbohrer quality for hazardous goods and tank logistics --- Technical Data • Gross vehicle weight: 39,000 kg • Axle load: 27,000 kg • Kingpin load: 12,000 kg • Fifth wheel height: 1,150 mm • Overall length: 8,160 mm • Total width: 2,550 mm • Unladen weight: approx. 3,200 kg • Axle spacing:  • 1st–2nd axle: 1,310 mm  • 2nd–3rd axle: 1,410 mm --- Standard Equipment • High-strength steel construction from S700 MC • KTL-coated chassis with 10-year corrosion protection • Container locks (JOST) for:  • 1 × 20 ft tank container  • Swap tanks (7,150 / 7,450 / 7,820 mm) • BPW axles, air suspension, disc brakes (3 × 9 t) • WABCO EBS brake system (2S/2M) including ABS & RSS • LED lighting system according to UN ECE R48 • Side underrun protection according to ECE R73 • Fixed underrun protection according to ECE R58.3 • Mechanical JOST landing legs (24 t) --- Included Options / Equipment • TPMS tire pressure monitoring system (WABCO OptiTire) • Aluminum rims (Kässbohrer selection) • ADR preparation (ADR compliant, T9 document to be provided by customer) • Hose carrier with stainless steel cover • Side and rear markings according to EU regulations • Fire extinguisher box • Axle load indicator gauge • Mudguards & spray protection complying with EU standards --- Suitable for Tank Container Transport • Chemical & hazardous goods logistics • Bulk liquids in ISO tank containers • National & international transport • Hauliers operating 20-ft and 30-ft tank containers --- Further equipment and customization available at any time – we configure your vehicle exactly to your specifications. Sample photo. Equipment may vary depending on configuration.

Condition: good (used), machine/vehicle number: WKVDAS00400129744, axle configuration: > 3 axles, loading space length: 12,000 mm, loading space width: 2,500 mm, loading space height: 1,200 mm, Year of construction: 2025, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Further Information = Weights Payload: 48,000 kg GVWR: 13,460 kg Condition Technical condition: good Optical condition: good Further Information Condition of front tires: 60 Condition of rear tires: 60 Front tires: 245/70 R17.5 Rcsdjzznruopfx Ahkoh Rear tires: 245/70 R17.5 Last inspection: 2026-09-03 Further Information Please contact Lastas Sales for more information.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production period. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in rough terrain ? Can be used on moorlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60 % ? Side slope up to 40 % ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Reversing camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type Rcjdpszdl R Hjfx Ahkjh ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing ring ? Hydraulic six-section boom Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry operations ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload combined with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road performance with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: new, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 50 m³, Equipment: ABS, Kässbohrer Tipping Silo Semi-Trailer NEW | 40–60 m³ | Alu | Food Grade | from €65,900 New vehicle – fully customizable for your application. Silo semi-trailer for bulk goods – available for either industrial or food-grade applications. Multiple volume options available (40 / 45 / 50 / 60 m³) — we offer expert advice tailored to your requirements. ----Highlights • Lightweight yet robust aluminium tipping silo • Available capacities: 40 / 45 / 50 / 60 m³ • Food-grade version available (e.g. for flour, animal feed) • Tiltable tank with DN700 discharge cone • Internally ground weld seams • BPW axles with air suspension & disc brakes • WABCO / KNORR EBS brake system • Non-slip walkway with foldable guardrail • Premium corrosion protection & durable paintwork ----Technical Data • Gross weight: 39,000 kg • Unladen weight: approx. 5,200 kg (±3%) • Axle load: 27,000 kg • Fifth wheel load: 12,000 kg • Tank diameter: approx. 2,530 mm • Vehicle height: approx. 4,000 mm • Saddle height: approx. 1,220 mm • Operating temperature: –20 °C to +80 °C • Operating pressure: 2.0 bar ----Standard Equipment • Aluminium tank with ground internal welds • 3 manholes DN450 • DN700 stainless steel discharge cone with fluidization • Stainless steel mixing module with brass valves Rjdjypa Rajpfx Ahkoch • Upper and side air lines, aluminium • Non-slip aluminium walkway with foldable fall protection • Aluminium access ladder (UVV compliant) • BPW axles with air suspension & disc brakes • Lift axle (EBS controlled) • Electronic air suspension (ECAS) • LED lighting (Aspöck) • JOST landing legs • Side and underrun protection to ECE standard ----Included Options / Special Equipment • Food-grade version available • Brass vacuum and non-return valves • Hose carriers on both sides (DN200) • Hydraulic tipping system (oil supply via tractor head) • Loading gauge • Toolbox • Aluminium underrun protection (tiltable) • Aluminium side impact protection • ECE-compliant reflective strips • Wheel nut covers with 'K' logo ----Further features and custom configurations available upon request – we can tailor your vehicle precisely to your needs. Example photo. Actual equipment may vary depending on final configuration.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS Rcjdpfx Ahszdl R Tskeh KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, loading space length: 20,440 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total width: 2,540 mm, color: red, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS Rcjdpfxozdirio Ahkoh - Air suspension - Disc brakes = Notes = New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with sliding brakes, extendable to 6.90 m, 3rd axle = steering axle (trailing axle), hardwood floor, 11 lashing points per side, 10 pocket slots per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 9,350 kg, permissible total weight: 45,000 kg, tires: 385/65-R22.5 (L: 16/16/16 mm; H: 16/16/16 mm), Dutch registration with valid main inspection until 04/29/2027, year of manufacture: 08/2023 = Further Information = General Information Year of construction: 2026 License plate: OX-78-HF Axle Configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 9,350 kg Payload: 35,650 kg GVWR: 45,000 kg Functional Body brand: Kässbohrer LB3E Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Condition: used, functionality: fully functional, overall weight: 2,650 kg, color: blue, Year of construction: 2010, Beach cleaning trailer: + Kässbohrer + BeachTech 2800 + Year of manufacture: 2010 + PTO drive (540 rpm) + Working width: 215 cm + 600 cm x 265 cm (tire width) x 240 cm + Weight: 2,650 kg + Maximum working depth: 30 cm + Collection container with rear tilting function + Rake / Sieve + Smoothing blade Redpfx Aez Egg Nshksch + Working speed: 12 km/h + Required tractor: 70 hp Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and misprints excepted, subject to prior sale!

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system Rcsdpezdl Sdofx Ahkeh CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. Rcsdpjzgzavjfx Ahkjh GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: new, empty load weight: 7,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, suspension: air, tire size: 385/65 r 22,5, Equipment: ABS, NEW, Disc brakes by Bpw, 1st axle liftable, 3rd axle steerable, 6 tires size 385/65 R 22.5, drop-side curtains with 800 mm aluminum sideboards, air suspension, ABS, and doors, internal height 2,700 + 50 mm. Rcjdpfxei Eknmo Ahkjh

Condition: new, maximum load weight: 37,700 kg, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Kässbohrer Container Chassis NEW | Extendable | 20–45 ft | 3 Axles | from €29,800 New vehicle – individually configurable to suit your specific application. Flexible container chassis designed for the professional transport of 20' to 45' containers. Rjdpoypa N Nofx Ahkoch ---Key Features--- • Extendable container chassis at the front, middle, and rear • Suitable for 20', 30', 40', and 45' containers • Also compatible with tank containers and high-cube containers • High operational flexibility for freight forwarding and intermodal transport • Lightweight construction with a robust frame • Container locks are sturdy and designed for practical use • Maintenance-friendly design for daily operation ---Chassis & Safety--- • 3-axle design • Branded axles (BPW or SAF, depending on configuration) • Air suspension with lift and lower function • WABCO EBS braking system • TPMS tire pressure monitoring system • LED lighting compliant with EU regulations Further equipment and individual customization are available at any time – we configure your vehicle exactly to your requirements. Sample image. Equipment may vary depending on configuration.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2025, next inspection (TÜV): 10/2027, loading space length: 7,800 mm, loading space width: 2,400 mm, loading space height: 1,600 mm, Year of construction: 2025, Steel tipper body, rear drop gate, lift axle on the first axle, work platform, saddle supports, roll-over cover, foldable rear underrun protection, and more. Errors and prior sales excepted. Rjdpfxs Aa E Dce Ahkjch