Kaessbohrer 3-axle container chassis, multifunctional with all connections, lift axle

Kässbohrer 3 AS CONTAINERCHASSIS, MULTI FUNCTIONAL ALL CON...

Condition: used, axle configuration: 3 axles, first registration: 05/2024, suspension: air, tire size: 385/55/22.5, color: other, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Tire size: 385/55/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 5,450 kg Payload: 37,550 kg GVW: 43,000 kg Bsdsz Dpkuspfx Adweww Damage: None License plate: OV-48-HS

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Bwedpfxeizu Nte Adwew Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm Bwjdpfxeiu Er Aj Adwjw -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle steered -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur

Condition: new, mileage: 4 km, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * FAN XG 480 Multi-changer 1120-1320 with tail lift * Chassis front design: Aero base plate Bjdpfx Asy A Uvfedweww * Air-suspended cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film * External sun visor * Two LED work lights on the rear cab wall * Reversing camera, prewiring for 2nd camera * DAF Corner View * Handles, trims, and side panels in cab color * LED headlights, cornering and fog lights * Fixed cab entry * XG cab * LED skylights * LED daytime running lights * Adjustable roof spoiler for XG cab * Lower cab step: Crystal White * Side skirt housing black for cab color Crystal White * Chassis color: anthracite grey * CRYSTAL WHITE * Headlight trim color: Crystal White * Bumper color: Crystal White * Roof spoiler color: Crystal White * Electrically operated roof hatch * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Preparation for pneumatic device * Passenger seat: cinema & table, fabric cover * Driver’s seat with swivel base * Xtra Comfort mattress for lower bunk * Upper bunk * Automatic climate control for cab * Refrigerator and drawer * Armrests on both sides of the driver’s seat * Storage compartment with drawer in center console * Luxury LED interior lighting * ECAS remote control with extended functions * Interior trim color scheme: Exclusive * Dashboard table * Steering wheel with silver accents * Cab interior design: Hexagon * Safety nets at both bunks * Curtains, no dividing curtain * Dashboard design: Plateau * Auxiliary heater with waste heat pump and timer * Wireless charger * Speakers: Exclusive * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * PACCAR Connect with navigation * Antennas: Radio, 2x mobile, GNSS Extra: CB * FMS connector, extended and prewired * Infotainment including DAF Truck Navigation * Adaptive Cruise Control with FCW and AEBS-3 * Predictive Cruise Control * Toll system preparation * Driver Performance Assistant * Reversing warning system * Lane departure warning system * Start assist * DAF Side and Turn Assist * Electronic stability control (VSC) * Speed limit recognition * DAF Drowsiness & Distraction Detection * Standard immobilizer * Automatic lift operation * Front air suspension: medium * Front: 8.00 t, air suspension, 161 N * Rear axle load capacity 13.00 t * Tag axle load 8.0 t * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Lifting device * Rear: 20.00 t, air suspension, SR1344 * Continental * F1, 315/70R22.5 CGW CEPS5 158/150 L Steering ABA 3P * R1, 315/70R22.5 CGW CEPD5 154/150 L Traction ACA 3P * R2, 315/70R22.5 CGW CEPS5 158/150 L Steering ABA 3P * Silver-grey wheel trims * Tire pressure monitoring system * Steel disc wheels, silver-grey * Urge-to-move * Mechanical differential lock * Traction aid 15.0 t * MX-13 engine, 355kW/483HP, cab emblem: 480 * Emission standard Euro 6 * Standard transport, full version * Eco-Fuel * Idle shutdown automatic, 5 minutes * Automated gearbox, TraXon, 12-speed * Automated manual gearbox, full version * Final drive ratio 2.21 * Traction control (ASR) * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 * ZF-Intarder * 2-cylinder compressor with clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * Wheels

Condition: new, Year of construction: 2023, Equipment: all wheel drive, Haulotte Compact 10DX - New device Delivery time: on request Color: Haulotte Standard (RAL1006) Delivery to your desired address is possible. Working height 10.28 m Platform height 8.28 m Maximum load capacity 565 kg Platform length 2.45 m Platform length with extension 3.7 m Platform extension 1.2 m Platform width 1.45 m Transport height 1.59 m Height when retracted 2.44 m Width 1.78 m Length 3.17 m Wheelbase 1.84 m Standard equipment: * All-wheel drive, steerable front wheels * Drive motor disengagement * Foam-filled tires for all terrains * One-sided platform extension 1.2 m * Removable control panel on the platform * 3° inclinometer * Automatic leveling of the outriggers * Horn * Operating hours counter * Batteries 12 V ? 74 Ah * Hydraulic brakes * Manual emergency lowering * Lifting eyes for fall protection Bwodpsmv Natjfx Adwsw * Towing and crane eyes * Side protection Additional options: * Non-marking tires * Socket on the work platform * Swing door * Hydr. generator 3.5 kW * Biodegradable hydraulic oil * Kit for cold countries * Preparation for tracking* * Acoustic driving signal * Warning signal when driving * Rotating beacon * Working lights * Fold-down railing * Optional color (RAL) *Only available ex works, cannot be retrofitted to stock machines. 24-month manufacturer's warranty on wages and spare parts.