Used Unsinn Gtp Trailers for sale (148)

Condition: new, Special offer! Stock vehicle from 2023! No initial registration! 9931385 Bsdpoy I Epmjfx Ap Isdc Refrigerated Trailer – Tandem Axle Manufacturer: Unsinn Model: UKT 6C 3015-26-14 Dimensions: 3000 x 1500 x 1900 mm (L x W x H) Permissible gross weight: 2,600 kg Unladen weight: approx. 775 kg Payload: approx. 1,825 kg (payload figures may vary depending on equipment and configuration) Unique, torsion-resistant aluminium chassis Four sturdy telescopic crank supports for up to 6,000 kg static load Thermo-sandwich construction Interior and exterior walls made of hot-dip galvanized and powder-coated steel sheet for extreme durability Insulation: 40 mm PU core Exterior color: silver RAL 9006 Double-winged rear doors with aluminium hinges Refrigerated compartment pressure lever lock Rear frame and edging profiles made from special anodized aluminium profiles for a visually appealing look Loading surface made from high-strength, multiple-bonded 18 mm phenolic plywood 200 mm high all-round underride protection on three sides Arktik 1600 N refrigeration unit Cooling capacity: 1,600 W at a compartment temperature of +6°C with ambient temperature of 30°C Temperature control range: +2°C to +10°C Mains connection: 230 V, 50 Hz Evaporator air flow rate: 750 m³/h Fully encapsulated refrigeration unit with outdoor housing mounted at the front, upper section Environmentally friendly, CFC-free refrigerant Electronic, automatic evaporator defrosting Lockable control display Reinforced jockey wheel Electronic digital thermostat for optimal temperature regulation Interior lighting Lighting system with 13-pin plug Reversing lights Available options and accessories for this trailer: Shock absorbers including 100 km/h type approval certificate Spare wheel including holder Anti-theft device Registration of your new trailer at the motor vehicle authority

Condition: new, Motorcycle Trailer Manufacturer: Unsinn Model: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1,800 kg Payload: approx. 1,300 kg (payload values may vary depending on equipment and build) Unladen weight: approx. 500 kg Bjdpfx Aoy I Eiysp Isdc Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized in immersion bath Body features 3-sided sturdy steel profile construction Continuous drive-on ramp enables access across the entire loading platform width 100 km/h version With self-adjusting brakes Continuous drive-on ramp enables access across the entire width of the loading area Foldable license plate holder installed Sturdy plastic mudguards mounted Safe and quick lashing possible all around the outer frame 1 lashing ring located centrally at the rear of the loading platform Reinforced, automatic jockey wheel for stable support of the loaded trailer 18 mm multi-bonded phenolic plywood floor, seamless, slip-resistant and waterproof Ramp angle approx. 5° when lowered Lighting with 13-pin connector and reverse light Hand pump with hydraulic lowering system and safety lock (available only on braked version) Including vehicle documents Optional equipment and accessories for this trailer: Motorcycle stand 400 mm removable aluminium side wall extension High canvas cover 1500 mm and 1700 mm in various colours Winch bracket without cable winch 900 kg hand winch Spare wheel holder for AS series incl. mounting kit Spare wheel 175/70 R13 Electrohydraulics installed in container with battery and charger, without emergency hand pump Foldable lashing rings Motorcycle tie-down straps * Registration of your new trailer at the licensing authority

Condition: new, Box Trailer as High Loader Manufacturer: Unsinn Bodpfx Apey I Egfs Ijdc Model: UKH 5424-30-13 Internal dimensions: 5460 x 2400 x 2100 mm (L x W x H) Permissible gross weight: 3000 kg Unladen weight: approx. 1220 kg Payload: approx. 1780 kg (Payload figures may vary depending on equipment and configuration) Exterior color: silver RAL 9006 Unique, torsion-resistant longitudinal chassis made from a robust steel frame for safe driving characteristics, fully hot-dip galvanized Walls made from insulating thermal panels, steel sandwich construction Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Interior and exterior cladding made from hot-dip galvanized and powder-coated steel sheet for durability under heavy use Insulation: 45 mm PU core Double-wing rear doors with aluminum hinges Stainless steel locking bar system Additional locking bar system on left rear door Stainless steel door retainers Platform made from 18 mm multi-bonded phenolic plywood, slip-resistant, waterproof Extra internal height: 2100 mm Aluminum edging profiles for a high-quality appearance 2 maneuvering handles mounted on the front wall profile Incl. vehicle documents Possible additional options and accessories for this trailer: Custom interior fittings Anti-theft device

Condition: used, Young used trailers from our extensive rental fleet! Bjdpfx Apsy I Efue Iodc Unsinn box trailers with thermo-sandwich body Manufacturer: Unsinn Model: KK 3048-14-1750 Internal dimensions: 4860 x 1750 x 2100 mm (L x W x H) Permissible total weight: 3000 kg Unladen weight: approx. 1005 kg Payload: 1995 kg (payload may vary depending on equipment and construction) Thermo-sandwich body Interior and exterior shell made from hot-dip galvanized and powder-coated steel Insulation: 40 mm PU core Exterior colour: silver RAL 9006 Plywood double-wing rear door with robust aluminum hinges Door holder Lockable stainless steel rotary bar lock Rear frame and edging profiles made from special aluminum profiles Load floor made from multi-glued phenolic resin plywood, 18 mm, anti-slip 10 recessed lashing points, 4 per side Torsion-resistant, stable longitudinal beam chassis for high point loads and safe driving characteristics Frame fully welded and hot-dip galvanized by immersion Reinforced automatic support wheel, load capacity 500 kg 13-pin plug Reversing light Marker lights 2 maneuvering handles ALKO coupling head with impact protection Registration date: 13.03.2026 Workshop-inspected New TÜV certificate available on request Possible additional options and accessories for this trailer: Spare wheel Cargo bars for optimal load securing Shock absorbers including 100 km/h report Interior lighting Lashing rings in the floor * Also available with rear ramp and/or side door

Condition: used, Used lowering machine transporter Manufacturer: Unsinn Type: AS 826-13-1550 Bjdpjy I Eafsfx Ap Ijdc Dimensions: 2600 x 1550 x 150 mm (L x W x H) Permissible total weight: 750 kg Loading height: 310 mm Lashing point on the loading area centrally at the rear Reinforced automatic support wheel Ramp angle in lowered position approx. 13° Lighting with 13-pin plug and reverse light First registration: 26/04/2016 Workshop-inspected With new TÜV on request

Condition: new, Special Price! In-stock vehicle from 2023! No initial registration! Bodpfsy I D N Ssx Ap Ijdc 9931235 Box trailer with double rear doors and sales hatch Manufacturer: Unsinn Model: UKU 421719-26-14 VKL Internal dimensions: 4260 x 1750 x 1940 mm (LxWxH) Gross vehicle weight: 2,600 kg Unladen weight: approx. 640 kg Payload: 1,960 kg (Payload may vary depending on equipment and specification) Loading height: approx. 550 mm Colour: white Sales hatch on the right side (in the direction of travel) Unique Panel walls made of GRP-steel sandwich, RAL 9016 Smooth exterior GRP walls provide optimal surfaces for lettering/wrapping Internal walls reinforced with steel for high impact resistance Double rear doors with premium aluminium hinges Robust stainless steel rotary bar lock (lockable) at the rear doors Stainless steel door retainers Loading floor made of 18 mm multi-bonded anti-slip and waterproof plywood Load securing system with 8 adjustable lashing rings for optimal cargo restraint Lashing rail on the side and front walls, height 900 mm Translucent roof for high light transmission Rear frame and edging profiles made from special anodised aluminium profiles Magnetic, swivelling LED interior light with motion sensor (can be positioned anywhere inside the trailer) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reverse lights Front marker lights Two manoeuvring handles on the front wall AL-KO coupling head with collision protection Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Rear-mounted prop stands Custom interior fittings Spare wheel incl. holder Anti-theft device Registration of your new trailer at the local vehicle registration office

Condition: new, Box trailer with loading ramp and sales hatch Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: approx. 3050 x 1570 x 1940 mm (L x W x H) Gross vehicle weight: 2,000 kg Bjdpoy I D N Eofx Ap Ijdc Unladen weight: approx. 575 kg Payload: approx. 1,425 kg (Payload may vary depending on equipment and configuration) Smooth GRP exterior walls for optimal branding/wrapping Steel-reinforced interior walls for enhanced impact resistance Rear loading ramp Heavy-duty stainless steel lockable bar lock on rear ramp Stainless steel door retainers Side sales hatch on right in direction of travel with robust stainless steel lockable bar lock Sales hatch dimensions: approx. 2,500 x 1,440 mm (L x H) Load area made of 18 mm multi-layer phenolic plywood, anti-slip and waterproof Lashing system with 8 adjustable lashing rings for optimal load securing Slat lashing rails on side and front walls, height 900 mm Translucent roof for high light transmission Rear frame and edging profiles made from special anodised aluminium sections Magnetic, swivelling LED interior light with motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reverse lights Front marker lights Two manoeuvring handles on the front wall ALKO coupling head with collision protection Including vehicle documents Available options and accessories for this trailer: Wheel shock absorbers incl. 100 km/h type approval Spare wheel incl. holder Drop-down supports Anti-theft device Registration of your new trailer at the vehicle registration office

Condition: new, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Load bed dimensions: 3660 x 1750 x 1200 mm (L x W x H) Gross vehicle weight: 3500 kg Bdedpfx Ajy I D Nxop Isc Unladen weight: 1245 kg Payload: 2255 kg (payload may vary depending on equipment and configuration) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers (required for 100 km/h approval) Single-piece steel floor, edge-bent across full width Patented cargo securing system with 14 lashing pins on and under the loading platform Each pin rated for 1500 daN (kg), rotatable 360° Side walls fixed on three sides Rear pendulum tailgate Flexible aluminium partition wall, can be slotted in at various positions for flexible cargo area division Robust rear fold-down supports for stable positioning even when the trailer is uncoupled Electric pump Manual emergency pump (pumpless system) Additional hydraulic connection for towing vehicle 2 rear work lights 13-pin lighting system Reversing light 2 plastic toolboxes, splash-proof, mounted left and right under the load platform Flat tarpaulin to protect dried firewood in bad weather, including storage compartment at the front wall Including vehicle documents Available options and accessories for this trailer: - 100 km/h approval certificate - Spare wheel with holder - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Condition: used, Young used trailers from our extensive rental fleet! 9934822 Used turntable trailer by Unsinn Fahrzeugtechnik, 3-axle design Manufacturer: Unsinn Model: UD-3 6022-35-13 Loading platform dimensions: approx. 6060 x 2200 x 350 mm (LxWxH) Permissible gross weight: 3,500 kg Unladen weight: 1,060 kg Payload: 2,440 kg (Payload may vary depending on configuration and build) Low loading height due to 195/50 R13 C tires 3-axle chassis ensures exceptional stability and smooth handling Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Welded hollow section construction, fully hot-dip galvanized by immersion 8 robust lashing recesses integrated into the frame (4 per side) 10 additional lashing rings underneath the loading platform Drop sides and corner posts removable without tools 13-pin electrical connector Flush-fitted long-stroke metal locks Marker lights Loading floor made of multi-bonded, anti-slip screen-printed board, 18 mm thick First registration: 27/11/2025 Workshop-inspected Bdodpoy I Dy Rjfx Ap Iec New TÜV certificate available on request Possible additional options and accessories for this trailer: Mounted spare wheel Load securing net including net hooks mounted on the drop side Under-run ramps slide-in system

Condition: new, Three-way tipper with electric pump, cordless screwdriver pump, and raised sidewall kit Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3,060 x 1,750 x 1,100 mm (LxWxH) Bdodjy I Dydjpfx Ap Ioc Loading height: approx. 770 mm Permissible total weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (Payload may vary depending on equipment and construction) With the innovative hinge solution of the KombiLine, the extensions can be conveniently folded down in just a few quick steps. This makes loading and unloading the trailer particularly ergonomic, easy, and time-saving. Electro-hydraulic pump with emergency pump function (Pumpless), allowing easy tipping with a cordless screwdriver in case of low battery. Integrated battery charger with 230 V plug. Battery and pump unit securely stored in the battery box, protected from dirt. Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the loading bed (for easy retrofitting of drive-on ramps). Maintenance support to secure the tipped bed during maintenance work. Unique, torsion-resistant longitudinal chassis for safe handling and high stability. Closed, fully welded and hot-dip galvanized steel frame profile. Continuous solid steel floor across the entire width of the vehicle. Reinforced automatic jockey wheel. Maneuvering handle with practical ratchet strap reel for easy handling. Load securing system for added flexibility and efficiency in load securing, DEKRA certified. 10 recessed lashing pins mounted in the steel floor. Lashing pins on and under the loading bed, each able to bear up to 1,500 kg and rotatable 360°. Sideboards are fully foldable and removable. Rear tailgate with steel cladding, foldable, including anti-slip protection for loading ramps. Robust toggle latches on the sideboards. 4 plug-in steel corner posts. Lighting with 13-pin plug and reversing light. Including vehicle documents. Available options and accessories for this trailer: Aluminum loading ramps Load securing net Support legs Anti-theft device Registration of your new trailer at the road traffic authority

Condition: new, Special price! In-stock vehicle from 2024! No first registration! 9933125 Box trailer with double-wing rear door and side door on the right in the direction of travel Manufacturer: Unsinn Model: ULK 2642-14-1750 Internal dimensions: 4260 x 1750 x 1940 mm (L x W x H) Gross vehicle weight: 2,600 kg Unladen weight: approx. 640 kg Payload: approx. 1,960 kg (payload may vary according to equipment and construction) Loading height: 550 mm Colour: white Walls made of lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal signage/wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Rear double-wing door with high-quality aluminium hinges Robust rotary rod lock (lockable) in stainless steel on the rear doors Stainless steel door retainers Loading platform made of 18 mm multiple-bonded phenolic plywood, anti-slip and waterproof Lashing system with 8 adjustable lashing rings for optimal cargo securing Slatted lashing rails on the side walls and front wall, height 900 mm Translucent roof panel for maximum light transmission Bjdpfx Ajy I Dxtsp Ijdc Rear frame and edging profiles made of special anodized aluminium profiles Magnetic, swivelling LED interior light with motion sensor (can be positioned anywhere inside the trailer) Automatic support wheel, load capacity 500 kg 13-pin connector and reversing lights Front position lights Two maneuvering handles on the front wall ALKO coupling head with collision protection Including vehicle documents Available options and accessories for this trailer: Shock absorbers including 100 km/h approval Spare wheel including holder Anti-theft device Sliding supports Custom interior fittings Registration of your new trailer at the registration office

Condition: new, Rear tipper with E-pump & cordless screwdriver pump Manufacturer: Unsinn Model: WEB HK 2715-26-13 Dimensions: 2760 x 1500 x 300 mm (LxWxH) Gross vehicle weight: 2,600 kg Unladen weight: approx. 555 kg Payload: approx. 2,005 kg (payload may vary depending on equipment and design) Hydraulic power unit "Pumpless" including socket adaptor for easy tilting with a cordless screwdriver Integrated battery charger with 230 V plug Battery and pump unit securely stored and protected from dirt in the battery box Integrated ramp compartment with clamping device and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal chassis frame for reliable driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Bjdpfoy I Du Uex Ap Iodc Solid steel floor running the entire width of the vehicle Maintenance support for securing the tilted body Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Load securing system for greater flexibility and efficiency in cargo securing, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings on and under the loading area, each loadable up to 1,000 kg and rotatable 360° Side walls fully fold-down and removable Rear flap with steel panel, foldable, including anti-slip protection for the loading ramps Robust lever locks on the side walls 4 detachable corner stanchions made of steel Lighting with 13-pin plug and reversing light Including vehicle documents Options and accessories available for this trailer: Whether mesh extension, steel extension or side wall extension - select your preferred variant and customize your superstructure individually. Thanks to the clever KOMBILINE system, extensions can be easily combined with each other. For example, a mesh extension at the front and rear can be perfectly combined with a steel or side wall extension at the sides – with no additional effort. Shock absorbers including 100 km/h (62 mph) type approval certificate Anti-theft device Drawbar cover Load securing net Registration of your new trailer at the road traffic authority

Condition: new, maximum load weight: 2,380 kg, overall weight: 620 kg, Year of construction: 2024, Information in German Unsinn UB 3016-30-14 (old designation: UBA 3030-14-1600) First-class low loader for transporting construction machinery, 2380 kg payload, total weight 3000 kg, Bdodpfevw I Tbjx Ap Isc Loading area: 3,060 x 1,600 x 300 mm, 2 swivel-mounted and laterally adjustable aluminum drive-on ramps with integrated floor support, Drive-on ramps can be swiveled to the side, 10 pairs of load securing points, optional bucket support. The construction machine shown is not included in the scope of delivery. Subject to errors and prior sale! Further information External dimensions: 0.00306x0.0016x0.3 Country of production: DE Please contact Philip Müller , , p-) for further information.----Information in English Vehicle's outer dimensions: 0,00306x0,0016x0,3 Rental currency: EUR Production country: DE Please contact Philip Müller , , p-) for more information

Condition: new, maximum load weight: 2,730 kg, overall weight: 580 kg, Year of construction: 2024, First-class low-loader for transporting construction machinery. Top model UBA 3618-35-14 (previous designation: 3536-14-1800) with a payload of 2,730 kg. Total permissible weight: 3,500 kg. Loading area: 3,660 × 1,800 × 300 mm. Side-adjustable aluminium loading ramps; access ramps can be swung out to the side; new condition. Bodpjvrbvfefx Ap Ijdc Optional: 100 km/h shock absorbers (+200 Euros) Optional: Bucket rest or other accessories The construction machine shown is not included in the scope of delivery. Subject to errors and prior sale! Further information: Front tyre size: 185R14C Rear tyre size: 185R14C Production country: DE Please contact Philip Müller, p-) for more information.

Condition: used, maximum load weight: 2,217 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, total width: 1,810 mm, total height: 930 mm, A46 GW260N0161390 High loader trailer manufacturer: Unsinn, Type: UH 3617-26-10, Gross vehicle weight 2,600 kg, overrun braked, 100 km/h, 10" aluminium rims, aluminium side wall... and much more. Product information: "Unsinn UH 3617-26-10", 100 km/h version, shock absorbers installed. Chassis: Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics * Hollow section construction, welded and fully hot-dip galvanized Axles, braked model: AL-KO braking system Bdsdpfeyqdtbex Ap Ijc Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Load securing: 8 foldable lashing recesses, recessed in the floor frame profile * 8 lashing rings under the loading surface * Vehicle not prepared Errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,530 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 01/2025, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 1,600 mm, total width: 1,565 mm, total height: 1,600 mm, A65 GW26M0146957 High-bed trailer, tandem axle, with premium tarpaulin and frame construction (internal height 160 cm), manufacturer Unsinn, model WEB H 2715-20-13, gross vehicle weight 2 t, with inertia brake, 100 km/h. Vehicle not refurbished. Subject to errors and prior sale. Bodpfx Asyqdqasp Iodc

Condition: used, maximum load weight: 1,090 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 1,560 mm, total width: 1,580 mm, total height: 300 mm, A61 GW26M0146902 High loader trailer with premium tarpaulin and frame (internal height 160 cm), manufacturer Unsinn, type WEB H 2315-13-10, gross vehicle weight: 1,300 kg, overrun brake, 100 km/h ...and much more. Bedpeyqdppefx Ap Isdc Subject to errors and prior sale.

Condition: used, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,500 mm, loading space width: 1,140 mm, loading space height: 355 mm, total width: 1,845 mm, total height: 900 mm, A51 GW26N0152553, low-loader trailer by Unsinn, type UT 2512-7-13, open box design, GVW: 750 kg, jockey wheel fitted. Frame: unique, torsion-resistant aluminium chassis for safe handling characteristics. Load securing: 4 recessed, foldable lashing eyes mounted in the side wall for reliable load lashing. Side panels: anodised aluminium hollow profile, fold-down rear, with recessed locks. *Front panel foldable. Loading area: made from multi-layer bonded phenolic plywood, 15 mm, seamless, slip-resistant and waterproof. ...and much more. Errors and prior sale excepted. Bjdpfx Aoyqdnljp Ijdc

Condition: used, maximum load weight: 649 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,100 mm, loading space width: 1,100 mm, loading space height: 650 mm, total width: 1,555 mm, total height: 900 mm, A63. GW26M0140819 Low-loader trailer by Unsinn, type UT 2111-7-13, Bedpeyqdnfsfx Ap Isdc Gross weight: 750 kg, open box, 100 km/h rating Errors and prior sale excepted.

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Vehicle not prepared Bsdpfxeyqdmzj Ap Iedc Errors and prior sale excepted.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,500 mm, loading space width: 1,358 mm, loading space height: 1,918 mm, total width: 1,920 mm, total height: 2,475 mm, A20 GW26P0201504 Refrigerated box trailer by Unsinn, type UKT6C 251319-13-14 Gross weight: 1,300 kg, low-loader, 4x heavy-duty support legs, overrun brake, equipped with GOVI air conditioning unit, model Arktik 1600N. Bsdpsyn Ug Tsfx Ap Iedc Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics Axles (braked version): AL-KO braking system Body: Thermo-sandwich construction * Inner and outer skins made of galvanized and powder-coated steel sheet for robust durability * PU-core insulation * Double-wing rear doors with aluminum hinges * Lever-lock and stainless-steel door retainer for the cooling compartment * Rear frame and edging profiles made of anodised special aluminum profiles for attractive aesthetics * All-around 3-sided impact protection Vehicle not refurbished Subject to errors and prior sale

Condition: used, maximum load weight: 2,123 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 08/2022, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 350 mm, total width: 1,647 mm, total height: 748 mm, Year of construction: 2022, A37 GW26N0159988, Rear tipper by Unsinn, type UHK 2627-14-1500, tandem axle, gross vehicle weight 2,600 kg, platform trailer, overrun brake, 100 km/h, aluminium side panels, pumpless cordless screwdriver pump. Subject to errors and prior sale. Bdedpfjyn Uc Uex Ap Iec

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale. Bdsdoyn Uc Iepfx Ap Ioc

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,475 mm, A19 GW26P0201501 Bjdpfxjyn Udrs Ap Isdc Refrigerated box trailer, manufacturer: Unsinn, model UKT 6°C 2513-13-14, dimensions: 2500x1350x1900 mm Refrigeration unit manufacturer: GOVI, model Arctik 1600N, serial no. 230317666A, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg Chassis: Unique, torsion-resistant aluminium frame for safe driving characteristics Axles, with braked version: AL-KO brake system Body: Thermo-sandwich construction * Inner and outer panel made of hot-dip galvanized and powder-coated steel sheet for robust use * Insulation: PU core * Rear double-wing door with aluminium hinges * Refrigerated compartment pressure lever lock and stainless steel door retainer * Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance * All-round three-sided impact protection Subject to errors and prior sale

Condition: new, maximum load weight: 2,610 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, Special offer! Unsinn GTAS 3536-14-1750 Electric MACHINE TRANSPORTER Technical data: * Trailer type: Lowering trailer, Unsinn GTAS 3536-14-1750 Electric * Date of first registration: 06/2026 * TÜV (technical inspection): valid until 06/2028 * Gross vehicle weight: 3500 kg * Payload: 2610 kg * Internal dimensions: L: 366 cm, W: 175 cm, H: 35 cm * Floor: Multiplex wood * Lashing points: 4 per side * Side panels: Steel * Frame: Steel frame * Electrical system: 13-pin, 12V * Tires: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel: standard Offer valid while stocks last!!! Offer valid only in Reichertshofen!!! Plus vehicle registration document / COC certificate: €39.00 All prices include VAT. Opening hours Reichertshofen: Monday to Friday from 08:00 to 12:00 and 13:00 to 17:00 Closed on Saturdays and Sundays Visit us also at: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=. You can also get your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: Bodpfeylf T Eox Ap Iodc B L Y S S transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. Illustrations may not correspond to the standard equipment; technical changes (e.g. tire sizes) are subject to change.