Used Unsinn Lk Trailers for sale (92)

Condition: used, Year of construction: 2022, Payload: 2,067 kg Gross vehicle weight: 533 kg Front tire condition: 95% Rear tire condition: 95% Front tires: - Rear tires: - Please contact PFEIFER GROUP for further information. Itsdpfx Agoutwalexsf

Condition: new, Box trailer with loading ramp and sales flap Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: approx. 3050 x 1570 x 1940 mm (L x W x H) Gross vehicle weight: 2,000 kg Unladen weight: approx. 570 kg Payload: approx. 1,430 kg (Payload specifications may vary depending on equipment and construction) Smooth GRP exterior walls for optimal signage/wrapping of the trailer Steel-reinforced interior walls for high impact resistance Rear loading ramp Robust stainless steel locking bar (lockable) on the loading flap Stainless steel door retainers Side sales flap on the right (in the direction of travel) with robust stainless steel locking bar (lockable) Side flap dimensions: 2,500 x 1,440 mm (L x H) Floor made of 18 mm multi-layered phenolic plywood, anti-slip and waterproof Load securing system with 8 adjustable lashing rings for optimal cargo safety Lashing rail on side walls and front wall, height 900 mm Transparent roof with high light transmission Rear frame and edging profiles made of special anodized aluminium sections Magnetic, swiveling LED interior light with motion sensor (can be positioned freely inside) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reversing light Front marker lights Two maneuvering handles at the front wall ALKO coupling head with collision protection Itsdpfx Aey Dbqlsgxjf including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel incl. holder Support stands Anti-theft device * Registration of your new trailer with the road traffic authority

Condition: used, Used tipping box trailer Manufacturer: Unsinn Type: PKLK 2636-10-1800 tipping Dimensions: 3660 x 1800 x 1900 mm (L x W x H) Permissible total weight: 2600 kg Hydraulically tiltable Loading ramp with aluminium chequer plate Lockable rotary bar lock Rear flap supported by damper 3 rows of combination rails per side: lower, middle, and upper area Rub rail 12 lashing points per side (6 each) Various locking bars Alloy wheels Automatic jockey wheel 2 grab handles at the front 2 sliding vents right and left First registration: 28.06.2017 Iodpfxoy Dbkle Agxstf Vehicle inspection valid until: 01.05.2027

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,500 mm, loading space width: 1,358 mm, loading space height: 1,918 mm, total width: 1,920 mm, total height: 2,475 mm, A20 GW26P0201504 Refrigerated box trailer by Unsinn, type UKT6C 251319-13-14 Gross weight: 1,300 kg, low-loader, 4x heavy-duty support legs, overrun brake, equipped with GOVI air conditioning unit, model Arktik 1600N. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics Axles (braked version): AL-KO braking system Body: Thermo-sandwich construction * Inner and outer skins made of galvanized and powder-coated steel sheet for robust durability * PU-core insulation * Double-wing rear doors with aluminum hinges * Lever-lock and stainless-steel door retainer for the cooling compartment * Rear frame and edging profiles made of anodised special aluminum profiles for attractive aesthetics * All-around 3-sided impact protection Vehicle not refurbished Iedpfx Asyn Ug Tjgxetf Subject to errors and prior sale

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,475 mm, A19 GW26P0201501 Refrigerated box trailer, manufacturer: Unsinn, model UKT 6°C 2513-13-14, dimensions: 2500x1350x1900 mm Itsdpfx Aeyn Udrsgxsf Refrigeration unit manufacturer: GOVI, model Arctik 1600N, serial no. 230317666A, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg Chassis: Unique, torsion-resistant aluminium frame for safe driving characteristics Axles, with braked version: AL-KO brake system Body: Thermo-sandwich construction * Inner and outer panel made of hot-dip galvanized and powder-coated steel sheet for robust use * Insulation: PU core * Rear double-wing door with aluminium hinges * Refrigerated compartment pressure lever lock and stainless steel door retainer * Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance * All-round three-sided impact protection Subject to errors and prior sale

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Itjdpsyn Uc Iefx Agxof Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: new, machine/vehicle number: 4367Klappe, empty load weight: 515 kg, maximum load weight: 1,485 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,571 mm, loading space height: 1,940 mm, tire size: 175/70 r13, color: white, Year of construction: 2022, Equipment: tail-lift, Special offer model year 2022 Manufacturer: ATB Fahrzeugtechnik GmbH Lightweight box trailer with ramp door !!! 100 km/h version with 2 sliding supports mounted at the rear right and left / sales hatch WxH: 2500x1440 mm!!! Swiveling LED interior lighting with motion detector incl. batteries Model: Box trailer type ULK2030-13-1570 with interior lighting and lashing rail Permissible gross weight: 2000 kg Payload: 1485 kg Dimensions: External dimensions (L/W/H): 4410x2070x2510 mm Number of axles: 2 Trailer loading height: approx. 540 mm Tyres: Tyres: 175/70 R13 Chassis: · Unique, torsion-free longitudinal beam chassis for safe driving characteristics Itedpfx Agolmmqlsxof Jockey wheel: · Reinforced automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg (braked version) Body: · Lightweight panels with GRP surface, white RAL 90196 · Transparent roof for good visibility when loading -Ramp door Size: 3660x1750x1940 mm with transverse bar lock and anti-slip plastic floor max. total load: 500 kg -Sales hatch with 2 gas struts, wind support, and external bar lock · Rear frame and edging profiles made of special anodised aluminium profiles · Loading platform made of multi-bonded phenolic plywood, 18 mm, anti-slip and waterproof Load securing: · Lashing system with 6 adjustable tie-down rings for optimal cargo securing · Lashing rail on the sides, height 900 mm Electrics: · Lighting with 13-pin plug and reversing lights · LED interior lighting

Condition: used, empty load weight: 650 kg, overall weight: 2,000 kg, first registration: 08/2012, next inspection (TÜV): 08/2026, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Year of construction: 2012, The pickup market for your new or used trailer offers you top-brand models ready to take away! - Over 850 new trailers in stock - Over 130 used trailers constantly available - Over 150 vehicle transporters – common designs with extensive accessories in stock Non-binding example: Used box van with sandwich construction and translucent roof - Box body with rear swing doors - Robust, smooth side walls, suitable for signage - Rear door: 2 wings with rotary rod lock - Internal loading dimensions approx. 300x150x180 cm Iedpfjy D Il Nox Agxstf - Overall dimensions approx. 420x200 cm, height 240 cm - Loading height only approx. 51 cm - Lashing points, lashing system, rear supports, 100 km/h approval - Please note tire age - Shelf / motorcycle mount, lightweight ramp included - Two previous owners - TÜV valid until 08/2026 - Gross weight 2000 kg, unladen weight approx. 650 kg - Margin taxed according to §25 UStG, no VAT can be stated Viewings and on-site sales are expressly desired and can take place by appointment during our business hours from Monday to Friday. 04/26 used fh1070

Condition: new, Refrigerated Trailer by Unsinn Fahrzeugtechnik with Drive Cooling and Side Door Manufacturer: Unsinn Model: UKT 0C 4217-35-14 Internal Dimensions: 4260 x 1750 x 1900 mm (L x W x H) Gross Vehicle Weight: 3,500 kg Unladen Weight: approx. 1,120 kg Payload: approx. 1,880 kg (Payload figures may vary depending on equipment and configuration) Loading Height: 660 mm Colour: White RAL 9001 Side door with external swing bar lock Swivelling crank supports at rear and front 230 V power unit for independent energy supply during transit Three-sided internal stainless steel scuff rail External stainless steel swing bar lock on the left rear door Refrigerated compartment lock on the right rear door Clear opening of rear doors: 1,740 x 1,890 mm Insulated floor with anti-slip plastic coating (slip resistance class R 12), permanently elastic and wear-resistant Longitudinal frame chassis made of sturdy welded steel, hot-dip galvanized by immersion AL-KO axles with self-adjusting brakes Reinforced, automatic jockey wheel for safe parking of loaded trailer, load capacity 500 kg Thermo-sandwich construction from insulated panels, inner and outer skins of galvanized and powder-coated steel sheet for heavy-duty use Itsdpfx Agey Db N Ijxjf Wall and insulated floor thickness: 60 mm Aluminium capping profiles Stainless steel rear portal Refrigeration unit Arktik 2000P top-mounted on front wall: Cooling capacity 2050 W at a chamber temperature of +10°C and ambient temperature of 30°C Temperature range: -20°C to +10°C -> Note: The stated temperature range of -20°C to +10°C refers only to the installed refrigeration unit. Due to the wall thickness of a positive temperature cooler, this trailer is designed as a zero-degree refrigerator and is not suitable for permanent deep-freeze use. Evaporator air flow: 1,130 m³/hour Mains connection: 230 Volt Self-explanatory control panel for easy and intuitive temperature adjustment Control panel is lockable to prevent unauthorized use Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Made in Germany Lighting with 13-pin connector and reversing lights Front maneuvering handles Marker lights Includes vehicle documents Possible additional options and accessories for this trailer: - Shock absorbers incl. 100 km/h certification - Spare wheel mounted on the side or front wall - Side lashing rail - Locking bars for optimal load securing - Anti-theft device

Condition: new, Special price! Stock vehicle from 2024! No prior registration! Car transporter - Universal transporter Manufacturer: Unsinn Model: UF 3617-13 Dimensions: 3660 x 1750 mm (L x W) Single-axle Gross vehicle weight: 1800 kg Payload approx. 1270 kg Loading height approx. 530 mm 8 folding lashing eyes, recessed in the floor frame profile 8 lashing eyes under the loading platform Side skirts for load securing Rail holders mounted under the loading platform 1 pair of steel loading ramps 1 winch mounted 13-pin connector Reversing light Including vehicle documents Iedoy Db Nhepfx Agxotf Possible options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer at the road traffic authority

Condition: new, Box trailer with double rear doors and side door Manufacturer: Unsinn Model: UKU 361719-26-14 Internal dimensions: 3660 x 1750 x 1940 mm (L x W x H) Gross vehicle weight: 2,600 kg Unladen weight: approx. 630 kg Payload: approx. 1,970 kg (Payload may vary depending on equipment and design) Loading height: 540 mm Colour: white Body panels made of lightweight GFRP-steel sandwich in RAL 9016 Smooth GFRP exterior walls ideal for signage or vehicle wrapping Steel-reinforced interior walls ensure high impact resistance Double rear doors with high-quality aluminium hinges Robust stainless steel T-bar locking system (lockable) on rear doors Stainless steel door retainers Side door on the right (in direction of travel) Load surface made from 18 mm multi-bonded anti-slip, waterproof phenolic plywood Lashing system with 8 adjustable lashing eyes for optimal load securing Lashing rail on side walls and front wall, height 900 mm Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light with motion sensor (can be positioned anywhere in the interior) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reversing light Front marker lights Two manoeuvring handles on the front wall Ijdpfxjy Dbxcs Agxstf ALKO coupling head with collision protection Including vehicle documents Possible options and accessories for this trailer: - Shock absorbers including 100 km/h certificate - Spare wheel with holder - Anti-theft device - Registration of your new trailer at the vehicle registration office

Condition: new, Construction machine transporter UB with swiveling loading ramps and excavator arm rest The universally applicable machine transporter from Unsinn allows, thanks to its high side walls, for the transport of bulk materials as well. Manufacturer: Unsinn Model: UB 3618-35-14 Internal dimensions: 3660 x 1800 x 300 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: approx. 770 kg Payload: approx. 2730 kg (payload may vary depending on equipment and configuration) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Hollow profile construction, fully welded and hot-dip galvanized Superstructure made from extremely robust steel side profiles Axles with self-adjusting brakes Walkable mudguards Excavator bucket rest on the drawbar (not shown in photos, but included) Reinforced automatic jockey wheel for secure parking when loaded, load capacity 500 kg 10 strong lashing points on the sides, rated at 2000 kg per lashing point 4 fold-down, adjustable aluminum loading ramps with integrated ground support, load capacity 3500 kg per pair The ramps allow quick and easy loading of machinery Forced support at the loading ramps Ramps can be swung to the side for ideal loading of, for example, pallet goods using a pallet fork or forklift Floor made of multi-laminated phenolic plywood, 18 mm thick, seamless, slip-resistant and waterproof Lighting with 13-pin connector and reversing lights Marker lights Includes vehicle documentation Available options and accessories for this trailer: Iedsy Dbqrepfx Agxjtf Shock absorbers including 100 km/h certificate Mounted aluminum toolbox Spare wheel including bracket Anti-theft device Registration of your new trailer at the road traffic authority

Condition: used, Used platform trailer with loading ramps and winch Manufacturer: Unsinn Model: PU 1836-13-1750 Load area dimensions: 3660 x 1750 mm (L x W) Permissible total weight: 1800 kg Unladen weight: approx. 500 kg Payload: approx. 1300 kg (payload may vary depending on configuration and design) Closed floor plate Lashing options along the entire length of the side skirts ensure safe transport 8 foldable lashing eyes, recessed and mounted in the floor frame profile Wheel chocks Loading ramps 2x support legs Sturdy winch post incl. winch Iodpfx Agey Dbp Isxjtf Automatic jockey wheel Tyres: 195/50 R 13C Shock absorbers 100 km/h approval possible Lighting with 13-pin plug and reversing light First registration: 03.01.2017 Workshop inspected Optionally with new TÜV certificate Available options and accessories for this trailer: Spare wheel incl. mount Anti-theft device * Registration of your new trailer at the road traffic authority

Condition: new, Three-way tipper with electric pump & mesh side extension Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Iedpsy Dbkxjfx Agxstf Gross vehicle weight: 3000 kg Unladen weight: approx. 835 kg Payload approx.: 2165 kg (payload may vary depending on equipment and configuration) Mesh side extension with integrated pendulum mounting in the corner stanchion, foldable on all four sides Thanks to the innovative hinge solution of the KombiLine series, the extensions can be easily folded down in just a few steps, making loading and unloading the trailer particularly ergonomic, easy, and time-saving Electrohydraulic pump with emergency function "Pumpless": enables tipping with a cordless drill when battery is low Integrated battery charger with 230 V plug Battery and pump unit safely stored and protected from dirt in the battery compartment Integrated ramp storage slot with tensioning device and folding license plate holder, for stowing loading ramps under the loading platform (ramps can be retrofitted easily) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Fully welded, hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support for securing the tipped platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Load securing system for increased flexibility and efficiency, DEKRA certified 10 tie-down rings recessed into the steel floor Tie-down rings located on and under the loading area, each loadable up to 1500 kg and 360° rotatable Side panels fully foldable and removable Tailgate with foldable steel plating including anti-slip protection for loading ramps Robust over-center fasteners on the side panels 4 removable corner stanchions made of steel Lighting system with 13-pin plug and reverse light Including vehicle papers Possible options and accessories for this trailer: - Side panel extension - Loading ramps - Support legs - Load securing net - Anti-theft device - Registration of your new trailer at the vehicle registration office

Condition: new, Rear tipper Iedpfxjy Dbi Is Agxstf Manufacturer: Unsinn Model: UHK 2315-15-10 Internal dimensions: 2300 x 1500 x 300 mm (L x W x H) Permissible total weight: 1500 kg Unladen weight: approx. 385 kg Payload: approx. 1115 kg (payload may vary depending on equipment and design) Loading height: 700 mm Frame: unique, torsion-resistant aluminium chassis for safe driving characteristics Reinforced automatic jockey wheel With manoeuvring handle Side walls made of aluminium hollow profiles with recessed long-path locks 4 insertable steel corner posts 6 recessed lashing rings in the steel floor Lighting with 13-pin plug and reversing light Hydraulic unit without pump, incl. socket wrench insert Including vehicle documents Possible additional options and accessories for this trailer: Spare wheel Rear supports Anti-theft device

Condition: new, Three-way tipper trailer with petrol hydraulic system Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (Payload specifications may vary depending on equipment and construction) Petrol-hydraulic unit including protective cover mounted in the V-drawbar Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (simple retrofit of loading ramps possible) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap holder for easy handling Load securing system for increased flexibility and efficiency in cargo securing, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings on and under the loading area, each loadable up to 1,500 kg and 360° rotatable Ijdpfjy Dbiujx Agxstf Side panels completely foldable and removable Rear panel with steel cladding foldable including anti-slip safety for loading ramps Robust angled toggle catches on the side panels 4 plug-in steel corner posts Lighting system with 13-pin connector and reversing light Incl. vehicle documents Possible options and accessories for this trailer: Whether mesh extension, steel extension or side panel extension – choose the right version and customize your build. Thanks to the clever KOMBILINE system, extensions can be easily combined, e.g. a mesh extension at the front and rear can be perfectly combined with a steel or side panel extension on the sides – all without extra effort. Loading ramps Prop stands Load securing net Anti-theft device Registration of your new trailer with the vehicle licensing authority

Condition: new, Rear tipper with electric pump & cordless drill pump Manufacturer: Unsinn Isdpsy Dbibsfx Agxjtf Model: UHK 2715-15-13 Internal dimensions: 2760 x 1500 x 300 mm (L x W x H) Permissible total weight: 1,500 kg Unladen weight: approx. 450 kg Payload: approx. 1,050 kg (Payload specifications may vary depending on equipment and build) Electro-hydraulic pump with emergency pump 'Pumpless' for easy tipping with a cordless screwdriver if the battery is low Integrated battery charger with 230V mains plug Battery and pump unit safely and dirt-protected stowed in a battery box Shock absorbers, 100 km/h approval Integrated ramp compartment with retaining device and folding license plate holder for storing loading ramps under the cargo bed (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal chassis frame for safe handling and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor, continuous across the full vehicle width Maintenance support strut for securing the tipper bed in tilted position Reinforced automatic jockey wheel Maneuvering handle with integrated strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 8 lashing points flush-mounted in the steel floor Lashing points on and under the cargo bed, each loadable up to 1,000 kg, 360° rotatable Side walls fully foldable and detachable Rear panel with fold-down steel cladding, including anti-slip protection for loading ramps Robust cam locks on the side panels 4 plug-in corner posts made of steel Lighting with 13-pin connector and reversing light Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or side wall extension - choose the right variant and customize your trailer build. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension at the front and rear can be perfectly matched with a steel or side wall extension on the sides—without extra effort. Loading ramps Drawbar cover Load securing net Supports Anti-theft device Registration of your new trailer at the vehicle registration office

Condition: new, Three-way tipper with electric pump & cordless screwdriver pump Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 4260 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Gross vehicle weight: 3500 kg Unladen weight: approx. 1145 kg Payload approx.: 2355 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency function “Pumpless” – allows tipping with a cordless screwdriver if the main battery is weak Integrated battery charger with 230 V plug Battery and pump unit safely stored and protected from dirt in the battery box Integrated ramp compartment with clamping device and folding license plate holder for storing loading ramps under the bed (easy retrofitting of ramps) Unique, torsion-resistant longitudinal frame chassis for safe handling and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty solid steel floor spanning the entire width of the vehicle Maintenance support for securing the tilted body Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for added flexibility and efficiency, DEKRA certified 18 lashing points recessed into the steel floor Lashing points on and beneath the loading platform, each loadable up to 1500 kg and rotatable 360° Dropsides completely folding and removable Tailgate with fold-down steel paneling including anti-slip guard for ramps Robust over-center latches on the dropsides 4 plug-in steel corner stakes Lighting with 13-pin connector and reverse light Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or side extension – select the variant that fits your requirements and configure the setup as you wish. Thanks to the innovative KOMBILINE system, extensions can be easily combined. For example, a mesh extension at the front and rear paired perfectly with a steel or standard side extension on the sides – no extra effort required Loading ramps Load securing net Anti-theft device Registration of your new trailer at the Vehicle Registration Office Ijdpfsy Dbhkex Agxstf

Condition: new, Rear tipper with electric pump & cordless drill pump Manufacturer: Unsinn Model: WEB HK 2715-26-13 Dimensions: 2760 x 1500 x 300 mm (L x W x H) Gross vehicle weight: 2,600 kg Unladen weight: approx. 555 kg Payload: approx. 2,005 kg (payload may vary depending on equipment and configuration) Ijdpfxjy Dbhdj Agxetf Electrohydraulic pump with emergency hand pump (Pumpless) for easy tipping using a cordless drill in case of a low battery Integrated battery charger with 230 V plug Battery and pump unit safely stowed and protected from dirt in a dedicated battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (for easy retrofitting of loading ramps) Unique torsion-resistant longitudinal chassis frame for reliable handling and high stability Closed, fully welded, hot-dip galvanized steel frame profile Heavy-duty, full-width steel floor Maintenance support for securing the raised platform Reinforced automatic jockey wheel Maneuvering handle with practical strap winder for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing eyes integrated in the steel floor Lashing eyes on and under the platform, each rated for up to 1,000 kg and 360° rotatable Drop sides fully foldable and removable Rear drop side, steel-plated, foldable incl. anti-slip protection for drive-up ramps Robust lever locks on the drop sides 4 plug-in steel corner posts Lighting with 13-pin connector and reversing light Including vehicle documents Optional features and accessories for this trailer: Whether mesh extension, steel extension, or drop side extension – choose the right variant and customize your superstructure. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension front and rear can be perfectly matched with a steel or drop side extension on the sides – without extra effort. Shock absorbers incl. 100 km/h approval Anti-theft device Drawbar cover Load securing net Registration of your new trailer at your local vehicle registration office

Condition: new, Special offer! Stock vehicle from 2023! No initial registration! 9931385 Refrigerated Trailer – Tandem Axle Manufacturer: Unsinn Model: UKT 6C 3015-26-14 Dimensions: 3000 x 1500 x 1900 mm (L x W x H) Iedpfoy Dbcnex Agxotf Permissible gross weight: 2,600 kg Unladen weight: approx. 775 kg Payload: approx. 1,825 kg (payload figures may vary depending on equipment and configuration) Unique, torsion-resistant aluminium chassis Four sturdy telescopic crank supports for up to 6,000 kg static load Thermo-sandwich construction Interior and exterior walls made of hot-dip galvanized and powder-coated steel sheet for extreme durability Insulation: 40 mm PU core Exterior color: silver RAL 9006 Double-winged rear doors with aluminium hinges Refrigerated compartment pressure lever lock Rear frame and edging profiles made from special anodized aluminium profiles for a visually appealing look Loading surface made from high-strength, multiple-bonded 18 mm phenolic plywood 200 mm high all-round underride protection on three sides Arktik 1600 N refrigeration unit Cooling capacity: 1,600 W at a compartment temperature of +6°C with ambient temperature of 30°C Temperature control range: +2°C to +10°C Mains connection: 230 V, 50 Hz Evaporator air flow rate: 750 m³/h Fully encapsulated refrigeration unit with outdoor housing mounted at the front, upper section Environmentally friendly, CFC-free refrigerant Electronic, automatic evaporator defrosting Lockable control display Reinforced jockey wheel Electronic digital thermostat for optimal temperature regulation Interior lighting Lighting system with 13-pin plug Reversing lights Available options and accessories for this trailer: Shock absorbers including 100 km/h type approval certificate Spare wheel including holder Anti-theft device Registration of your new trailer at the motor vehicle authority

Condition: new, Motorcycle Trailer Manufacturer: Unsinn Model: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1,800 kg Payload: approx. 1,300 kg (payload values may vary depending on equipment and build) Unladen weight: approx. 500 kg Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized in immersion bath Body features 3-sided sturdy steel profile construction Continuous drive-on ramp enables access across the entire loading platform width 100 km/h version With self-adjusting brakes Continuous drive-on ramp enables access across the entire width of the loading area Foldable license plate holder installed Sturdy plastic mudguards mounted Safe and quick lashing possible all around the outer frame 1 lashing ring located centrally at the rear of the loading platform Reinforced, automatic jockey wheel for stable support of the loaded trailer 18 mm multi-bonded phenolic plywood floor, seamless, slip-resistant and waterproof Ramp angle approx. 5° when lowered Lighting with 13-pin connector and reverse light Hand pump with hydraulic lowering system and safety lock (available only on braked version) Including vehicle documents Itjdpfjy Dbatox Agxef Optional equipment and accessories for this trailer: Motorcycle stand 400 mm removable aluminium side wall extension High canvas cover 1500 mm and 1700 mm in various colours Winch bracket without cable winch 900 kg hand winch Spare wheel holder for AS series incl. mounting kit Spare wheel 175/70 R13 Electrohydraulics installed in container with battery and charger, without emergency hand pump Foldable lashing rings Motorcycle tie-down straps * Registration of your new trailer at the licensing authority

Condition: new, Material transport trailer with extendable drawbar Manufacturer: Unsinn Fahrzeugtechnik Model: ULM 4820-35-14 Gross vehicle weight rating: 3,500 kg Unladen weight: approx. 1,075 kg Payload: approx. 2,425 kg (payload may vary depending on equipment and design) Dimensions: approx. 4,860 x 2,040 x 750 mm (L x W x H) Quick-adjust tubular drawbar, tool-free extension (usable drawbar length 3,100 mm) 4 drop-in stake pockets 100 x 100 mm, flush-mounted with the loading platform Two insertable stanchions 90 x 90 mm (total length approx. 3,000 mm) with multiple securing lashing eyes Adjustable support bracket for the extendable drawbar Torsion-resistant longitudinal beam chassis for stable driving characteristics Robust hollow section frame, welded and fully hot-dip galvanized by immersion Reinforced jockey wheel for secure parking of loaded trailer, load capacity 500 kg 8 foldable, rattle-free lashing rings recessed into the floor profile Itsdpfx Agoy Axp Ajxjf 8 additional lashing eyes under the loading platform 8 foldable lashing pockets 8 lashing eyes under the loading platform Internal long-throw metal locks Removable sidewalls and corner stanchions Marker lights Includes vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h speed rating certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer with the road traffic authority

Condition: new, Three-way tipper with electric pump & cordless drill pump, loading ramps and supports Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump with emergency manual pump (pumpless function) for easy tipping via cordless drill when battery is low Integrated battery charger with 230 V plug Battery and pump unit securely and dirt-protected in a battery compartment Aluminium loading ramps 2,560 x 300 mm, rated for 2,800 kg per pair Integrated ramp compartment with clamping device and foldable license plate holder for stowing the ramps underneath the loading platform Robust drop legs Unique, torsion-resistant longitudinal beam chassis for safe driving and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous, heavy-duty steel floor spanning the entire vehicle width Maintenance support for securing the tipper body when raised Reinforced automatic jockey wheel Maneuvering handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 10 recessed lashing pins mounted in the steel floor Lashing points on and under the loading platform, each rated for up to 1,500 kg and 360° rotatable Side panels fully foldable and removable Tailgate with foldable steel plating, incl. anti-slip protection for loading ramps Robust angle lever locks on the side panels 4 plug-in steel corner posts Ijdjy Axkyepfx Agxetf Lighting with 13-pin plug and reversing light Incl. vehicle documents Possible options and accessories for this trailer: Side extension Mesh extension Load securing net Anti-theft device Registration of your new trailer with the vehicle licensing authority

Condition: new, maximum load weight: 2,380 kg, overall weight: 620 kg, Year of construction: 2024, Information in German Unsinn UB 3016-30-14 (old designation: UBA 3030-14-1600) First-class low loader for transporting construction machinery, 2380 kg payload, total weight 3000 kg, Loading area: 3,060 x 1,600 x 300 mm, 2 swivel-mounted and laterally adjustable aluminum drive-on ramps with integrated floor support, Drive-on ramps can be swiveled to the side, 10 pairs of load securing points, optional bucket support. The construction machine shown is not included in the scope of delivery. Subject to errors and prior sale! Further information External dimensions: 0.00306x0.0016x0.3 Country of production: DE Please contact Philip Müller , , p-) for further information.----Information in English Vehicle's outer dimensions: 0,00306x0,0016x0,3 Rental currency: EUR Isdsvw I Tbjpfx Agxotf Production country: DE Please contact Philip Müller , , p-) for more information

Condition: used, maximum load weight: 2,060 kg, first registration: 01/2025, Year of construction: 2025, First registration 05/2025, permissible total weight 2,600 kg, payload approx. 2,060 kg, internal box/body dimensions (L/W/H): 4,260 x 1,750 x 300 mm, tyres 185/65 R14, number of axles: 2, trailer loading height approx. 690 mm, 100 km/h, TÜV valid until 05/2027, 8 lashing eyes Net price: EUR 3,900 VAT: 195 Gross price: EUR 4,641 Itsdpfsxz Nttsx Agxef Subject to errors and prior sale!