Used Unsinn Udk Trailers for sale (147)

Condition: new, Three-way tipper with steel side wall extension Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading area dimensions: 3660 x 1750 x 1100 mm (L x W x H) Gross vehicle weight rating: 3,500 kg Unladen weight: 985 kg Payload: 2,515 kg (Payload may vary depending on equipment and design) Tyres: 185 R14 C Steel side wall extension: 750 mm Automatic jockey wheel Single-piece pressed steel floor extending the full width Patented load securing system with 14 lashing pins on and under the loading platform Each lashing point rated at 1,500 daN (kg), rotatable 360° Drop and fully removable side panels Rear tailgate with steel plating, foldable, including anti-slip protection for loading ramps 4 removable steel corner posts Electric pump Hand emergency pump (Pumpless System) Additional hydraulic connection for towing vehicle 2 rear working lights Lighting with 13-pin plug Reversing lights Incl. vehicle documents Optional equipment and accessories for this trailer: - 100 km/h approval certificate - Spare wheel including bracket Psdpfx Ajy H Nm Tjfnjpr - Folding supports - Anti-theft device - Drawbar cover - Registration of your new trailer at the road traffic office

Condition: new, Three-way tipper trailer with electric pump Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3000 kg Unladen weight: approx. 835 kg Payload approx.: 2165 kg (payload may vary depending on configuration and equipment) Electrohydraulic pump with emergency 'Pumpless' function, for easy tipping using a cordless screwdriver when the main battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and securely protected from dirt in a dedicated battery compartment Integrated ramp compartment with tensioning device and foldable number plate bracket for storing loading ramps under the platform (simplifies optional ramp installation) Podpfxsy H Nbdo Afnjpr Unique, torsion-resistant longitudinal beam chassis for safe handling and high stability Closed, fully welded and hot-dip galvanized steel frame profile Full-width, heavy-duty steel floor across the entire trailer Maintenance support bar for securing the tilted loading bed Reinforced automatic jockey wheel Maneuvering handle with practical lashing strap reel for easy handling Load securing system for greater flexibility and efficiency in load restraint, DEKRA certified 10 recessed lashing pins integrated into the steel floor Lashing pins on and below the platform, each loadable up to 1500 kg and rotatable 360° Side walls fully foldable and removable Rear tailgate with foldable steel panelling including anti-slip guard for loading ramps Robust cam locks on side panels 4 removable steel corner posts Lighting with 13-pin plug and reversing light Includes vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or sideboard extension – choose the suitable variant and configure your trailer body individually. Thanks to the smart KOMBILINE system, the extensions can be easily combined. For example, a mesh extension at the front and rear can be perfectly combined with steel or sideboard extensions on the sides – without extra effort. Loading ramps Support legs Load securing net Anti-theft device Registration of your new trailer at the road traffic authority

Condition: new, Three-way tipper trailer with electric pump Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Gross vehicle weight rating (GVWR): 3,500 kg Unladen weight: approx. 905 kg Ppodsy H Na Tepfx Afnjr Payload: approx. 2,595 kg (Payload can vary depending on equipment and configuration) Electrohydraulic pump with emergency 'Pumpless' feature, allowing easy tipping using a cordless screwdriver if the battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and securely stored in a dirt-protected battery box Integrated ramp compartment with tensioning device and folding number plate holder for storing loading ramps under the platform (ramps can be easily retrofitted) Unique, torsion-resistant chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support bar for securing the tipped body Reinforced automatic jockey wheel Maneuvering handle with practical strap winding system for easy handling Load securing system for greater flexibility and efficiency, DEKRA-certified 14 recessed lashing rings mounted in the steel floor Lashing rings on and under the loading area, each with up to 1,500 kg load capacity and 360° rotation Sideboards fully foldable and removable Rear tailgate with fold-down steel plating, including anti-slip ramp retainer Robust drop-latch fasteners on the sidewalls 4 detachable steel corner stanchions Lighting with 13-pin connector and reverse light Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension or sideboard extension—choose the variant that suits your needs and configure individually. Thanks to the clever KOMBILINE system, side extensions can be easily combined as needed. For example, you can fit mesh extensions front and rear, combined with steel or board side extensions on the sides—no additional work required. Loading ramps Support stands Load securing nets Anti-theft devices Registration of your new trailer with the local vehicle registration office

Condition: new, Three-way tipper with electric pump, cordless screwdriver pump, and raised sidewall kit Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3,060 x 1,750 x 1,100 mm (LxWxH) Loading height: approx. 770 mm Permissible total weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (Payload may vary depending on equipment and construction) With the innovative hinge solution of the KombiLine, the extensions can be conveniently folded down in just a few quick steps. This makes loading and unloading the trailer particularly ergonomic, easy, and time-saving. Ppodpfsy H D Irex Afner Electro-hydraulic pump with emergency pump function (Pumpless), allowing easy tipping with a cordless screwdriver in case of low battery. Integrated battery charger with 230 V plug. Battery and pump unit securely stored in the battery box, protected from dirt. Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the loading bed (for easy retrofitting of drive-on ramps). Maintenance support to secure the tipped bed during maintenance work. Unique, torsion-resistant longitudinal chassis for safe handling and high stability. Closed, fully welded and hot-dip galvanized steel frame profile. Continuous solid steel floor across the entire width of the vehicle. Reinforced automatic jockey wheel. Maneuvering handle with practical ratchet strap reel for easy handling. Load securing system for added flexibility and efficiency in load securing, DEKRA certified. 10 recessed lashing pins mounted in the steel floor. Lashing pins on and under the loading bed, each able to bear up to 1,500 kg and rotatable 360°. Sideboards are fully foldable and removable. Rear tailgate with steel cladding, foldable, including anti-slip protection for loading ramps. Robust toggle latches on the sideboards. 4 plug-in steel corner posts. Lighting with 13-pin plug and reversing light. Including vehicle documents. Available options and accessories for this trailer: Aluminum loading ramps Load securing net Support legs Anti-theft device Registration of your new trailer at the road traffic authority

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Pedpfx Aoym Ih Usfnepr

Condition: new, Three-way tipper with electric pump, cordless drill pump & mesh side extension Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Permissible gross weight: 3500 kg Unladen weight: approx. 985 kg Payload approx.: 2515 kg (Payload may vary depending on equipment and configuration) Mesh side extension with integrated pendulum bearing in the corner stanchions, 4-sided, foldable on the sides The innovative hinge solution of the KombiLine enables convenient folding of the side extensions with just a few simple steps. This makes loading and unloading the trailer exceptionally ergonomic, easy, and time-saving. Electrohydraulic pump with emergency 'Pumpless' system, allowing tipping operation via cordless drill in case of low battery Integrated battery charger with 230V plug Battery and pump unit safely and dirt-protected housed in a battery box Integrated ramp compartment with tensioning device and folding license plate holder for stowing loading ramps under the bed (easy retrofitting of ramps possible) Unique, torsion-resistant longitudinal frame for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor across the entire trailer width Maintenance support for securing the tipped body Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap winder for easy handling Cargo securing system for maximum flexibility and efficiency, DEKRA certified 14 recessed lashing rings in the steel floor Lashing rings on and under the load surface, each withstand up to 1500 kg and are 360° rotatable Sideboards fully foldable and removable Tailgate with foldable steel paneling including anti-slip device for loading ramps Robust cam locks on the sideboards Ppedpey E Tb Sofx Afner 4 detachable steel corner posts Lighting with 13-pin connector and reversing light Including vehicle documents Optional extras and accessories for this trailer: Side extension Loading ramps Supports Cargo securing net Anti-theft device Registration of your new trailer at the vehicle licensing office

Condition: new, Three-way tipper with electric pump & cordless screwdriver pump Manufacturer: Unsinn Model: UDK 3620-35-14 Dimensions: 3660 x 2040 x 350 mm (L x W x H) Loading height: 770 mm Perm. total weight: 3500 kg Unladen weight: approx. 1065 kg Payload approx.: 2435 kg (Payload may vary depending on equipment and design) Electrohydraulic pump with emergency manual 'Pumpless' feature, enables easy tipping via cordless screwdriver in case of low battery Ppedpfxsy E Rg So Afnor Integrated battery charger with 230 V plug Battery and pump unit safely and cleanly stored in a dedicated battery box Integrated ramp stowage with clamping device and folding license plate holder for storing loading ramps under the platform (allows for easy retrofitting of loading ramps) Unique, torsion-resistant longitudinal chassis for secure driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance strut for securing the tilted platform Reinforced automatic jockey wheel Shunting handle with practical lashing strap winder for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 14 lashing rings recessed into the steel floor Lashing rings on and under the loading platform, each rotatable 360° and loadable up to 1500 kg Side panels fully foldable and removable Tailgate with steel cladding, foldable incl. anti-slip protection for loading ramps Robust camlock closures on side panels 4 removable steel corner stanchions Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension or side wall extension – choose the suitable variant and configure your superstructure as desired. Thanks to the smart KOMBILINE system, extensions can be easily combined. For example, a mesh extension front and rear can be perfectly combined with a steel or side wall extension on the sides – without additional effort. Loading ramps Cargo net Anti-theft device Registration of your new trailer at the licensing authority

Condition: new, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Load bed dimensions: 3660 x 1750 x 1200 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: 1245 kg Payload: 2255 kg (payload may vary depending on equipment and configuration) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers (required for 100 km/h approval) Single-piece steel floor, edge-bent across full width Patented cargo securing system with 14 lashing pins on and under the loading platform Each pin rated for 1500 daN (kg), rotatable 360° Side walls fixed on three sides Rear pendulum tailgate Flexible aluminium partition wall, can be slotted in at various positions for flexible cargo area division Robust rear fold-down supports for stable positioning even when the trailer is uncoupled Electric pump Manual emergency pump (pumpless system) Additional hydraulic connection for towing vehicle 2 rear work lights 13-pin lighting system Reversing light 2 plastic toolboxes, splash-proof, mounted left and right under the load platform Flat tarpaulin to protect dried firewood in bad weather, including storage compartment at the front wall Including vehicle documents Pedpfxjy E Rd Ro Afnopr Available options and accessories for this trailer: - 100 km/h approval certificate - Spare wheel with holder - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Condition: new, Three-way tipper with electric pump & mesh side extension Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3000 kg Unladen weight: approx. 835 kg Payload approx.: 2165 kg (payload may vary depending on equipment and configuration) Mesh side extension with integrated pendulum mounting in the corner stanchion, foldable on all four sides Thanks to the innovative hinge solution of the KombiLine series, the extensions can be easily folded down in just a few steps, making loading and unloading the trailer particularly ergonomic, easy, and time-saving Electrohydraulic pump with emergency function "Pumpless": enables tipping with a cordless drill when battery is low Integrated battery charger with 230 V plug Battery and pump unit safely stored and protected from dirt in the battery compartment Integrated ramp storage slot with tensioning device and folding license plate holder, for stowing loading ramps under the loading platform (ramps can be retrofitted easily) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Fully welded, hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support for securing the tipped platform Reinforced automatic jockey wheel Ppsdpfx Asy Dbkxsfnsr Maneuvering handle with practical strap reel for easy handling Load securing system for increased flexibility and efficiency, DEKRA certified 10 tie-down rings recessed into the steel floor Tie-down rings located on and under the loading area, each loadable up to 1500 kg and 360° rotatable Side panels fully foldable and removable Tailgate with foldable steel plating including anti-slip protection for loading ramps Robust over-center fasteners on the side panels 4 removable corner stanchions made of steel Lighting system with 13-pin plug and reverse light Including vehicle papers Possible options and accessories for this trailer: - Side panel extension - Loading ramps - Support legs - Load securing net - Anti-theft device - Registration of your new trailer at the vehicle registration office

Condition: new, Three-way tipper trailer with petrol hydraulic system Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (Payload specifications may vary depending on equipment and construction) Petrol-hydraulic unit including protective cover mounted in the V-drawbar Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (simple retrofit of loading ramps possible) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap holder for easy handling Load securing system for increased flexibility and efficiency in cargo securing, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings on and under the loading area, each loadable up to 1,500 kg and 360° rotatable Side panels completely foldable and removable Ppodpjy Dbiujfx Afnor Rear panel with steel cladding foldable including anti-slip safety for loading ramps Robust angled toggle catches on the side panels 4 plug-in steel corner posts Lighting system with 13-pin connector and reversing light Incl. vehicle documents Possible options and accessories for this trailer: Whether mesh extension, steel extension or side panel extension – choose the right version and customize your build. Thanks to the clever KOMBILINE system, extensions can be easily combined, e.g. a mesh extension at the front and rear can be perfectly combined with a steel or side panel extension on the sides – all without extra effort. Loading ramps Prop stands Load securing net Anti-theft device Registration of your new trailer with the vehicle licensing authority

Condition: new, Three-way tipper with electric pump & cordless screwdriver pump Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 4260 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Gross vehicle weight: 3500 kg Unladen weight: approx. 1145 kg Payload approx.: 2355 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency function “Pumpless” – allows tipping with a cordless screwdriver if the main battery is weak Integrated battery charger with 230 V plug Battery and pump unit safely stored and protected from dirt in the battery box Integrated ramp compartment with clamping device and folding license plate holder for storing loading ramps under the bed (easy retrofitting of ramps) Unique, torsion-resistant longitudinal frame chassis for safe handling and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty solid steel floor spanning the entire width of the vehicle Maintenance support for securing the tilted body Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for added flexibility and efficiency, DEKRA certified 18 lashing points recessed into the steel floor Lashing points on and beneath the loading platform, each loadable up to 1500 kg and rotatable 360° Dropsides completely folding and removable Tailgate with fold-down steel paneling including anti-slip guard for ramps Robust over-center latches on the dropsides 4 plug-in steel corner stakes Pedpsy Dbhkjfx Afnepr Lighting with 13-pin connector and reverse light Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or side extension – select the variant that fits your requirements and configure the setup as you wish. Thanks to the innovative KOMBILINE system, extensions can be easily combined. For example, a mesh extension at the front and rear paired perfectly with a steel or standard side extension on the sides – no extra effort required Loading ramps Load securing net Anti-theft device Registration of your new trailer at the Vehicle Registration Office

Condition: new, Three-way tipper with electric pump & cordless drill pump, loading ramps and supports Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump with emergency manual pump (pumpless function) for easy tipping via cordless drill when battery is low Integrated battery charger with 230 V plug Battery and pump unit securely and dirt-protected in a battery compartment Aluminium loading ramps 2,560 x 300 mm, rated for 2,800 kg per pair Integrated ramp compartment with clamping device and foldable license plate holder for stowing the ramps underneath the loading platform Robust drop legs Unique, torsion-resistant longitudinal beam chassis for safe driving and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous, heavy-duty steel floor spanning the entire vehicle width Maintenance support for securing the tipper body when raised Reinforced automatic jockey wheel Maneuvering handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 10 recessed lashing pins mounted in the steel floor Lashing points on and under the loading platform, each rated for up to 1,500 kg and 360° rotatable Pedpfx Aoy Axkysfnjpr Side panels fully foldable and removable Tailgate with foldable steel plating, incl. anti-slip protection for loading ramps Robust angle lever locks on the side panels 4 plug-in steel corner posts Lighting with 13-pin plug and reversing light Incl. vehicle documents Possible options and accessories for this trailer: Side extension Mesh extension Load securing net Anti-theft device Registration of your new trailer with the vehicle licensing authority

Condition: new, empty load weight: 1,140 kg, maximum load weight: 2,360 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 350 mm, loading space volume: 3.4 m³, color: silver, construction height: 1,200 mm, working width: 2,210 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,140 kg - Payload: 2,360 kg - Interior dimensions: 426 x 204 x 35 cm (L x W x H) - Overall exterior dimensions: 575 x 221 x 120 cm (L x W x H) - Loading sill height: 78 cm - Tyres: 185R14C steel rims - Brake: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge Surcharge - Lashing eyes: 18 pieces per 1500kg - Supports: Surcharge - Ramps: Surcharge Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Ramp shaft with tensioning device under the loading area including folding license plate holder With maintenance support - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - Drop sides removable - Rear drop side mounted on pendulum bearings - Full steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available. Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - Spinlock® load securing system - 18 lashing pins mounted recessed in the steel floor, tensile force per lashing pin up to 1.500 kg - When recessed, the lashing pins can be used as a lashing option under the loading area with the aid of a belt loop - Electro-hydraulic pump - including integrated charger - Pumpless emergency pump incl. socket wrench insert - Automatic reverse - ALKO overrun device and parking brake - Sturdy tension locks - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Very sturdy V-drawbar - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Large reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with tensioning strap retractor - registration documents: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for o Ppsdpfx Aju Hr Rysfnsr

Condition: new, empty load weight: 790 kg, maximum load weight: 2,210 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,130 mm, working width: 1,910 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 790 kg - Payload: 2,210 kg - Interior dimensions: 306 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 191 x 113 cm (L x W x H) - Loading sill height: 78 cm - Tyres: 185R14C steel rims - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45 - Hydraulic cylinder stages: 3 stages - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at an extra charge extra charge - Lashing eyes: 6 pieces recessed in the floor - Supports: extra charge - Ramps: extra charge Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Preparation for loading rail bracket - Double-walled anodized aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized. hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - electro-hydraulic pump - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with tensioning straps - registration documents: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ppsdpfxju N Nhuo Afner

Condition: new, functionality: fully functional, machine/vehicle number: 208663, empty load weight: 1,190 kg, maximum load weight: 2,310 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 2,040 mm, loading space height: 400 mm, tire size: 185R14C, color: silver, Year of construction: 2024, Equipment: tail-lift, SPECIAL PRICE until June 5, 2025!!! 650 mm mesh extension with integrated pendulum bearing in the corner stanchion, 4-sided, ILxIB 3660x2040 mm, type UH, UDK Aluminum loading ramps, 2560x300 mm, load capacity 2800 kg/pair, and one pair with sturdy pivoting parking supports for 13/14 inch tires UNSINN plastic tool box, splash-proof, mounted under the loading area, on the right in the direction of travel, Inner dimensions LxWxH 430x180x188 mm Ppjdpormlzhofx Afnor Frame -Torsion-resistant longitudinal beam chassis (longitudinal beams continuous from the overrun device to the light bracket) for high directional stability -Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability -Integrated ramp shaft with clamping device and foldable license plate holder for safe and elegant storage of the loading ramps under the Loading Area -With maintenance support for securing the tilted deck during maintenance work Joint Wheel -Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer -Maneuvering handle with practical tensioning strap retractor for easy handling Loading Area & Deck -Solid steel floor extending across the entire width of the vehicle -Bridge with the maximum number of crossbeams for particularly high point loads Load Securing -Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA-certified -Lashing pins recessed into the steel floor, symmetrically distributed -Lashing pins on and under the loading area, each capable of withstanding loads of up to 1500 daN (kg) and rotatable 360° -Pot magnet with key ring for removing the lashing pins when the side panel is open Side Panels -Solid steel side panels (400 mm), foldable and removable on four sides, with galvanized angle lever locks and an integrated net and tarpaulin strip, powder-coated in black-gray (RAL 7021). -Four plug-in steel corner posts for heavy loads and easy loading and attachment of accessories. Hydraulics -Protected electric hydraulic system with battery and powerful charger for a long service life. -Pumpless emergency pump including a matching socket for convenient and easy tipping with a cordless screwdriver when the battery is low. Electrics -Lighting with a 13-pin connector and protected rear lights for long and safe operation of the electrical components. -Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.

Condition: new, functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2025, Three-way tipper UDK 3017-30-14 Spinlock®, 350 mm drop sides with corner lever locks, rear drop side with steel paneling, electric hydraulics with emergency "Pumpless" pump, integrated ramp compartment incl. foldable license plate holder, maintenance support. Internal body dimensions: 3,060 × 1,750 × 350 mm Loading height: 750 mm Payload: 2,160 kg Tyres: 185 R14C 8PR Chassis Torsion-resistant longitudinal chassis frame (continuous from the coupling device to the rear lamp bracket) for superior tracking stability. Enclosed, fully welded and hot-dip galvanized steel frame profile for optimum durability. Integrated ramp compartment with tensioning device and foldable license plate holder for secure and elegant storage of ramps under the loading platform. Supplied with maintenance support to secure the tilted bed during servicing. Jockey Wheel Reinforced automatic jockey wheel, mounted on a separate crossmember, with a load capacity of 500 kg for safe parking of the trailer. Manoeuvring handle with practical ratchet strap winder for easy handling. Load Platform & Bed Continuous heavy-duty steel floor across the full vehicle width. Bed with maximum number of crossmembers for superior point load capacity. Load Securing Patented Spinlock load securing system for greater flexibility and efficiency, DEKRA certified. Pedpfx Aoxc Eh Ajfnspr 10 recessed lashing pins symmetrically distributed in the steel floor. Lashing pins above and below the platform, each loadable up to 1,500 daN (kg) and rotatable 360°. Pot magnet with key fob for easy removal of lashing pins when the drop side is open. Drop Sides Anodised, fully foldable and removable aluminium drop sides. Galvanized corner lever fasteners with spring-loaded safety catch. Rear drop side with steel paneling, foldable, including slip protection for ramps. 4 plug-in steel corner stanchions for high load capacity and easy loading & mounting of accessories. Hydraulics Protected mounting of the electric hydraulics with battery and high-performance charger for long service life. Pumpless emergency pump incl. matching socket wrench insert for convenient and simple tipping operation using a cordless screwdriver in case of low battery.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, Vehicle Data – Certificate of Conformity (GTP 35) Manufacturer: Unsinn Fahrzeugtechnik GmbH Type: GTP 35 Variant: 3.V. Version: E.T.M.K.3.R.1 Trade designation: UDK 3030-14-1750 Vehicle category: O2 Vehicle Identification Number (VIN): WUF2H5800S0217734 Date of manufacture: 07.03.2025 Type approval location: e12007/4601164*04 Approved speed: 140 km/h ⸻ Dimensions • Axles: 2 / 4 • Wheelbase: 3292 mm • Axle spacing: • 1st: 2572 mm • 2nd: 720 mm • Length: 4530 mm • Width: 1930 mm • Height: 1100 mm • Distance from center of coupling to rear: 4492 mm • Cargo area length: 3060 mm • Rear overhang: 1200 mm ⸻ Weights • Unladen weight (ready-to-drive): 489 kg • Axle 1: 232 kg • Axle 2: 232 kg • Technically permissible gross weight: 3000 kg • Axle 1: 1500 kg • Axle 2: 1500 kg • Axle group 1: 3000 kg • Permissible nose weight (techn.): 100 kg ⸻ Ppodpfswywyzex Afnsr Tyres and Rims • Wheel/tyre combination (e.g., standard tyres): 185R14C 104N on 5.5Jx14 ET30 • Permissible combinations according to notes: 195R14C, 185R14C, 185/60R12C, 195/60R12C, 195/50R13C – with various rim sizes (e.g., 5.5Jx14, 6Jx14, 5.5Jx13, etc.) Offset (ET): 25–35 mm ⸻ Towing Device • Approval number: E1 55R-011594 ext.02 • Specifications: • D-value: 26.9 kN • Nose weight (S): 325 kg ⸻ Brakes, Body, Equipment • Brake: Mechanical • Body code: DC10 • TPMS (tyre pressure monitoring system): No • Shock absorbers required for 100 km/h approval • Not certified according to UN ECE R 155/156 - - - All information without guarantee - - - Illustrations may differ - - -

Condition: new, Lowerable trailer – ideal for transporting motorcycles Manufacturer: Unsinn Model: UA 3118-18-13 Internal dimensions: approx. 3150 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1,800 kg Unladen weight: approx. 440 kg Payload: approx. 1,360 kg (Payload figures may vary depending on equipment and configuration) Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe handling, fully hot-dip galvanised Three-sided body made of robust steel profiles Continuous loading ramp allows access over the entire width of the loading area Shock absorbers incl. 100 km/h certification Automatically adjusting brakes Foldable license plate holder mounted Robust plastic mudguards fitted Safe and fast load securing via tie-down points along the outer frame 1 lashing ring mounted centrally at the rear of the loading area Reinforced automatic jockey wheel for safe parking when trailer is loaded Loading platform made of multi-bonded phenolic plywood, 18 mm thick, seamless, slip-resistant and water-resistant Ramp angle when lowered: approx. 5° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering system and lowering lock (only available with braked version) Including vehicle documents Psdpfoy H Sxxjx Afnjpr Optional equipment and accessories for this trailer: Motorcycle wheel chock Motorcycle tie-down straps Drop side extension Winch Spare wheel including holder Anti-theft device * Registration of your new trailer at the vehicle registration office

Condition: new, Lowerable trailer with extremely flat ramp angle Manufacturer: Unsinn Model: UA 3118-15-13 Motorcycle trailer, machine transporter Gross vehicle weight: 1,500 kg Unladen weight: 455 kg Payload: approx. 1,045 kg (payload may vary depending on equipment and configuration) Dimensions: 3,150 x 1,800 x 150 mm Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized 3-sided body made of sturdy steel profile Shock absorbers incl. 100 km/h type approval Continuous ramp allows loading across the entire width of the loading area Foldable license plate holder installed Durable plastic mudguards installed Reinforced, automatic jockey wheel for safe parking of the loaded trailer Loading surface made of multi-layer, phenolic resin-coated plywood, 18 mm thick, seamless, anti-slip and waterproof Fast and secure lashing possible around the outer frame 1 lashing ring on the loading surface, rear center Ramp angle when lowered approx. 6° Lighting with 13-pin connector and reverse light Hand pump with hydraulic lowering device and mechanical lowering safety lock Tires: 195/50 R13C Braked Incl. vehicle documents Ppsdpfoy H Sxfjx Afnjr Available options and accessories for this trailer: Spare wheel incl. holder Anti-theft lock Registration of your new trailer with the road traffic authority

Condition: used, Nearly new trailers from our extensive rental fleet! 9930809 Lowerable box trailer by Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKA 3717-18-13 Internal dimensions: 3750 x 1770 x 1940 mm (LxWxH) Gross weight: 1800 kg Unladen weight: approx. 680 kg Payload: approx. 1120 kg (Payload figures may vary depending on equipment and construction) Walls made of lightweight GFRP-steel sandwich panels Colour: white RAL 9016 Swivelling LED interior light with motion sensor Unique panels with smooth GFRP coating on the exterior for easy wrapping Steel-coated interior walls for high impact resistance Transparent light roof providing excellent light transmission Shock absorbers including 100 km/h approval certificate Durable steel frame with tubular drawbar, fully hot-dip galvanised Rear frame and edging profiles made of anodised aluminium Reinforced automatic jockey wheel with convenient manoeuvring handle Pjdpfx Afey H Swzsnopr Upward-opening tailgate Robust stainless steel drop bolt lock on tailgate (lockable) Rubber lip on the tailgate protects the interior from spray water Continuous loading ramp enables easy and secure loading across the entire trailer width Load floor made from multiple-bonded birch plywood, 18 mm, seamless, anti-slip and waterproof Ramp angle when lowered: approx. 5° Extremely low ramp angle allows easy access with a pallet truck 6 side-folding lashing rings inside Lighting with 13-pin plug Marker lights Two front manoeuvring handles First registration: 09.02.2024 Workshop inspected Optionally with new TÜV inspection Available options and accessories for this trailer: Side lashing rails Load-securing bars for optimal cargo safety Spare wheel including mount Anti-theft device Registration of your new trailer with the vehicle registration office

Condition: used, Young used trailers from our rental fleet! 9926319 Box trailer with tarpaulin, foldable front wall, and 100 km/h approval Manufacturer: Unsinn Model: K 1325-14-1400 Dimensions: 2500 x 1400 x 1600 mm (LxWxH) Gross vehicle weight: 1300 kg Ppjdpfxjy H Snmo Afnsr Unladen weight: approx. 255 kg Payload: approx. 1045 kg Loading height: 550 mm Tarpaulin with Rosemeier branding Tyres: 185/65 R 14 Chassis: Unique, torsion-resistant aluminium frame for safe driving characteristics Axles: with self-adjusting brakes Jockey wheel 4 recessed and adjustable lashing rings mounted in the side wall Side walls made of aluminium hollow section with recessed long-stroke locks Lighting with 13-pin plug and reversing light Front wall foldable for transporting long materials Shock absorbers incl. 100 km/h type approval Rear support legs Front marker lights First registration: 04.01.2024 Workshop-inspected New TÜV inspection available on request Available options and accessories for this trailer: Spare wheel incl. mount Anti-theft device Registration of your new trailer with the vehicle registration authority

Condition: new, Special offer! Stock vehicle from 2023! No first registration! 9930301 Refrigerated trailer by Unsinn Fahrzeugtechnik with three ceiling rail tracks Manufacturer: Unsinn Model: KIK 3536-14-1750 with 3 ceiling rail tracks Internal dimensions: 3660 x 1750 x 2250 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: approx. 1545 kg Payload: approx. 1955 kg (Payload specifications may vary depending on equipment and design) Loading height: 650 mm Color: silver RAL 9006 3 ceiling rail tracks 200 mm high, three-sided stainless steel scuff rail inside Additional locking bar on left rear door Unique, torsion-resistant longitudinal chassis for safe handling Frame constructed from robust hollow profiles, welded and fully hot-dip galvanized ALKO axles with self-adjusting brakes Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 4 crank-type extendable supports Thermo-sandwich body Interior and exterior surfaces made of hot-dip galvanized and powder-coated steel sheet for durability Insulation: 60 mm PU core Insulated floor Double rear wing doors with heavy-duty stainless steel locking bar and aluminium hinges Stainless steel rear portal Cooling capacity: 2,035 watts at 0°C cold room temperature and 30°C ambient temperature Temperature regulation range: -2°C to +15°C Starting current reduction for refrigeration unit operation with 230 V generators instead of 400 V generators Mains connection: 230 volts Evaporator air flow: 1130 m³/h Fully encapsulated unit with outdoor aluminium housing mounted at the front Environmentally friendly, CFC-free refrigerant Electronic cooling controller with defrost management Self-explanatory control display for simple and intuitive temperature setting Control display is lockable for protection against unauthorized use Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Made in Germany Lighting with 13-pin plug and reversing light Manoeuvring handles at the front Marker lights Including vehicle documents Possible additional options and accessories for this trailer: Ppsdpfx Afsy H Slfjnor Shock absorbers incl. 100 km/h approval Spare wheel mounted sideways or on the front wall Lashing rail on side walls Load locks for optimal cargo securing Custom interior fit-out 230 V generator for independent power supply during transit Anti-theft device

Condition: new, Special price! Stock vehicle from 2023! Never registered! 9930292 Refrigerated trailer by Unsinn Fahrzeugtechnik with two roof rails and drive refrigeration system Manufacturer: Unsinn Model: UKT 0 3015 Internal dimensions: 3060 x 1500 x 2250 mm (L x W x H) Gross vehicle weight: 3,000 kg Unladen weight: approx. 1,240 kg Payload: approx. 1,760 kg (Payload may vary depending on equipment and configuration) Loading height: 650 mm Color: silver RAL 9006 2 roof rails 230 V generator for independent power supply while driving 3-sided, 200 mm high stainless steel scuff rails inside Additional locking bar on left rear door Unique, torsion-resistant longitudinal frame chassis for safe handling Chassis made of robust, welded hollow profile construction, fully hot-dip galvanized by immersion AL-KO axles with automatic brake adjusters Reinforced, automatic jockey wheel for secure support of the loaded trailer, load capacity 500 kg 4 crank-type extendable support legs Thermo-sandwich body Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use 60 mm PU-core insulation Insulated floor Double-leaf rear door with robust stainless steel locking bar and aluminum hinges Stainless steel rear portal Cooling capacity: 2,035 W at +0°C box temperature and 30°C ambient temperature Temperature control range from -2°C to +15°C Starting current reduction for cooling units to allow operation with 230 V power supply instead of 400 V units 230 V mains connection Evaporator air volume: 1,130 m³/h Fully enclosed refrigeration unit mounted at the front with outdoor aluminum housing Environmentally friendly CFC-free refrigerant Electronic temperature controller with defrost management Intuitive control display for easy and user-friendly temperature settings The control panel is lockable for protection against unauthorized operation Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality build – Quality made in Germany Lighting with 13-pin connector and reversing lights Manoeuvring handles at the front Marker lights Including vehicle documents Available options and accessories for this trailer: Ppsdpfx Asy H Si Dsfnsr Shock absorbers including 100 km/h certificate Spare wheel, mounted on the side or front wall Lashing rails on the side Load bars for optimal cargo securing Custom interior fittings Anti-theft device

Condition: new, Special offer! Stock vehicle from 2022! No initial registration! Refrigerated trailer by Unsinn Fahrzeugtechnik with two roof tube rails Manufacturer: Unsinn Model: KIK 3530-14-1500 Internal dimensions: 3060 x 1500 x 2250 mm (LxWxH) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,230 kg Payload: approx. 2,270 kg (payload may vary depending on equipment and construction) Loading height: 650 mm Color: silver RAL 9006 2 roof tube rails 3-sided stainless steel rubbing strip in interior Stainless steel rod lock on both rear doors Aluminum hinges Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Frame made of robust hollow-profile construction, welded and fully hot-dip galvanized by immersion AL-KO axles with self-adjusting brakes Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 4 sturdy crank supports Thermo-sandwich construction Interior and exterior surfaces made from galvanized and powder-coated steel sheet, for heavy-duty use 60 mm PU-core insulation Insulated floor with slip-resistant plastic covering Stainless steel rear portal Cooling capacity 2,035 W at a cold room temperature of +0° C and an ambient temperature of 30° C Temperature control range from -2° C to +15° C Ppedpfoy H Shmox Afnsr Mains connection 230 V Evaporator air volume: 1,130 m³/hour Fully encapsulated unit with weatherproof aluminum cover, mounted on the front Environmentally friendly, CFC-free refrigerant Electronic refrigeration controller with defrost management Self-explanatory control display for easy and intuitive temperature adjustment Control display is lockable, providing protection against unauthorized use Digital temperature display for easy monitoring of the trailer temperature 230 V interior lighting High-quality workmanship – Made in Germany Lighting with 13-pin connector and reversing light Maneuvering handles at the front Marker lights Incl. vehicle documents Optional extras and accessories available for this trailer: - Shock absorbers including 100 km/h type approval - Spare wheel, mounted on the side or front bulkhead - Side lashing rail - Restraining bars for optimum load securing - Custom interior fitting - Anti-theft device - Registration of your new trailer at the vehicle registration office

Condition: new, Special price! Stock vehicle from 2022! No initial registration! Refrigerated trailer from Unsinn Fahrzeugtechnik with two roof tube tracks – Quality made in Germany Manufacturer: Unsinn Model: KIK 3036-14-1500 Internal dimensions: 3660 x 1500 x 2250 mm (L x W x H) Permissible total weight: 3,000 kg Unladen weight: approx. 1,285 kg Payload: approx. 1,715 kg (payload specification may vary depending on equipment and configuration) Loading height: approx. 650 mm Colour: silver RAL 9006 2 roof tube tracks 3-sided internal stainless steel scuff strip Lockable stainless steel rotating bar latches on both rear doors Aluminum hinges Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Frame made from robust box section construction, fully welded and hot-dip galvanized by immersion AL-KO axles with self-adjusting brakes Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 4 heavy-duty crank supports for a stationary load of up to 6,000 kg Thermo-sandwich body Interior and exterior cladding made of galvanized and powder-coated steel sheet, built for tough use Pjdpfx Aoy H Sflofnopr Insulation: 60 mm PU core Insulated floor with slip-resistant plastic covering Extra robust stainless steel rear portal Cooling capacity: 2,035 W at a refrigerated compartment temperature of +0 °C and an ambient temperature of 30 °C Temperature control range from -2 °C to +15 °C Mains connection: 230 V Air volume flow of evaporator: 1,130 m³/hour Fully encapsulated refrigeration unit with outdoor aluminum hood mounted at the front Environmentally friendly CFC-free refrigerant Electronic refrigeration controller with defrost management Self-explanatory control display for easy and intuitive temperature setting Control display is lockable and therefore protected against unauthorized operation Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Quality made in Germany Lighting with 13-pin plug and reverse spotlight Maneuvering handles at the front Marker lights Incl. vehicle documents Further options and equipment for this trailer available: Shock absorbers incl. 100 km/h approval Spare wheel mounted on the side or front wall Side lashing rails Cargo bars for optimum load securing Anti-theft device For individualized and tailored financing, just contact us! Over 1,500 trailers available at Anhänger-Centrum Rosemeier. Browse our range. We’ll be happy to advise you. Illustrations may show accessories not included in the standard delivery. Specifications and technical data may vary slightly due to continuous improvements. Errors and changes excepted!