Used Unsinn Gtp Trailers for sale (141)

Condition: used, maximum load weight: 2,735 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,260 mm, loading space width: 2,040 mm, total width: 2,100 mm, total height: 990 mm, A23 GW26M0147488 High-loader with manually operated hand winch (removable), fitted with overrun brake, wooden floor plate, rear drop-leg supports (accessory), 2 loading ramps behind the license plate... and many more features. Subject to errors and prior sale. Gsdpfxoy S Nkpe Am Toui

Condition: new, Three-way tipper with steel side wall extension Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading area dimensions: 3660 x 1750 x 1100 mm (L x W x H) Gross vehicle weight rating: 3,500 kg Unladen weight: 985 kg Payload: 2,515 kg (Payload may vary depending on equipment and design) Tyres: 185 R14 C Steel side wall extension: 750 mm Gjdjy I Nmpepfx Am Tsui Automatic jockey wheel Single-piece pressed steel floor extending the full width Patented load securing system with 14 lashing pins on and under the loading platform Each lashing point rated at 1,500 daN (kg), rotatable 360° Drop and fully removable side panels Rear tailgate with steel plating, foldable, including anti-slip protection for loading ramps 4 removable steel corner posts Electric pump Hand emergency pump (Pumpless System) Additional hydraulic connection for towing vehicle 2 rear working lights Lighting with 13-pin plug Reversing lights Incl. vehicle documents Optional equipment and accessories for this trailer: - 100 km/h approval certificate - Spare wheel including bracket - Folding supports - Anti-theft device - Drawbar cover - Registration of your new trailer at the road traffic office

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Gusdpfsym Ih Uox Am Tsi

Condition: new, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Load bed dimensions: 3660 x 1750 x 1200 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: 1245 kg Payload: 2255 kg (payload may vary depending on equipment and configuration) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers (required for 100 km/h approval) Single-piece steel floor, edge-bent across full width Patented cargo securing system with 14 lashing pins on and under the loading platform Each pin rated for 1500 daN (kg), rotatable 360° Side walls fixed on three sides Rear pendulum tailgate Flexible aluminium partition wall, can be slotted in at various positions for flexible cargo area division Robust rear fold-down supports for stable positioning even when the trailer is uncoupled Electric pump Manual emergency pump (pumpless system) Additional hydraulic connection for towing vehicle 2 rear work lights 13-pin lighting system Reversing light 2 plastic toolboxes, splash-proof, mounted left and right under the load platform Flat tarpaulin to protect dried firewood in bad weather, including storage compartment at the front wall Including vehicle documents Gedpjy I D Nxjfx Am Teui Available options and accessories for this trailer: - 100 km/h approval certificate - Spare wheel with holder - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Condition: new, empty load weight: 950 kg, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, total length: 4,530 mm, total width: 1,930 mm, suspension: other, tire size: 185R14C, trailer brake: trailer braked, Unsinn UDK-S 3017-35-14 Three-way tipper 306 x 175 cm, 3500 kg -NEW VEHICLE- - New, welded, and hot-dip galvanized steel side wall, 35 cm - New Spinlock cargo securing system - With continuous steel floor - Electro-hydraulic system with charger and cordless screwdriver emergency operation Technical data: Internal box dimensions 306 x 175 x 35 cm Overall dimensions 453 x 193 cm Permissible total weight 3500 kg Tare weight 950 kg Payload 2550 kg Tire size 185R14C Tandem axle, braked Loading height 77 cm Design and equipment: Frame / Chassis: Unique, torsionally rigid longitudinal frame for safe driving characteristics Maintenance-free rubber spring axles, individual wheel suspension Frame: closed hollow profile construction, welded and completely hot-dip galvanized Preparation for ramp bracket under the loading area Heavy-duty support wheel, metal rim, automatically foldable, load capacity 500 kg Side walls: Side walls 35 cm high, steel, welded and hot-dip galvanized External cast steel hook fasteners Side walls can be folded down and removed on all four sides, 4 pluggable steel corner posts for high load capacity Rear wall with steel plate covering Loading area / Cargo securing: Steel floor across the entire width of the vehicle, with an edge on the side 10 Spinlock lashing points, each with a tensile load of 1500 kg, flush-mounted and integrated, can be rotated 360°, usable on and under the loading area High point load possible due to the special design of the substructure NEW: Maintenance support Electrical system / Hydraulics: Electrical system: 12V, 13-pole plug, with reversing light Lighting unit, compactly mounted and protected Hydraulic tipping, electric pump with battery and integrated charger, emergency pump with cordless screwdriver connection 4 ball bearing tipping pivots, 3-stage tipping cylinder Simple repositioning of the locking bolts to change the direction of tipping Available accessories, for example (surcharge on request): Combineline attachments now available in countless heights and combinations - consultation and then an individual offer! Hydraulic connection for towing vehicle Adapter from 7 to 13-pole Godpe Ah Trxsfx Am Tsui Box lock against theft H-frame at the front, pluggable Flat cover High cover and frame on request Spare wheel Heavy-duty rear support legs Ramps for original mounting, pair, L 2560 mm, load capacity 2800 kg / pair

Condition: new, Three-way tipper with electric pump & cordless drill pump Manufacturer: Unsinn Model: UDK 4220-35-14 Gujdpfxoy Rbuqo Am Tsi Dimensions: 4260 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 1145 kg Payload approx.: 2355 kg (payload details may vary depending on equipment and configuration) Electrohydraulic pump with emergency function 'Pumpless', allows tipping operation with a cordless drill in case of low battery Integrated battery charger with 230 V socket Battery and pump unit safely stored and protected from dirt inside the battery box Integrated ramp compartment with tensioning device and foldable license plate holder for stowing loading ramps under the bed (easy retrofit of ramps possible) Unique, torsion-resistant longitudinal beam chassis for stable driving characteristics and high stability Fully closed, fully welded, hot-dip galvanized steel frame profile Solid steel floor spanning the entire width of the trailer Maintenance support for securing the raised tipper platform Reinforced automatic jockey wheel Shunting handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 18 recessed tie-down points in the steel floor Tie-down points on and under the loading surface, each rated up to 1500 kg and rotatable 360° Side panels fully tiltable and removable Rear drop-side with steel cladding, drop-down with anti-slip safety for driving ramps Sturdy lever locks on side panels 4 removable steel corner posts Lighting with 13-pin plug and reversing light Including vehicle documents Available options & accessories for this trailer: Whether mesh, steel, or side panel extensions – choose the right variant and customize your trailer. Thanks to the smart KOMBILINE system, extensions can be easily combined; e.g., mesh extensions at front and rear perfectly combined with steel or side panel extensions on the sides, without extra effort. Loading ramps Load securing net Anti-theft device Registration of your new trailer at the vehicle licensing authority

Condition: new, Rear tipper Gujdjy I E Nmspfx Am Tsi Manufacturer: Unsinn Model: UHK 2315-15-10 Internal dimensions: 2300 x 1500 x 300 mm (L x W x H) Permissible total weight: 1500 kg Unladen weight: approx. 385 kg Payload: approx. 1115 kg (payload may vary depending on equipment and design) Loading height: 700 mm Frame: unique, torsion-resistant aluminium chassis for safe driving characteristics Reinforced automatic jockey wheel With manoeuvring handle Side walls made of aluminium hollow profiles with recessed long-path locks 4 insertable steel corner posts 6 recessed lashing rings in the steel floor Lighting with 13-pin plug and reversing light Hydraulic unit without pump, incl. socket wrench insert Including vehicle documents Possible additional options and accessories for this trailer: Spare wheel Rear supports Anti-theft device

Condition: new, Three-way tipper trailer with petrol hydraulic system Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (Payload specifications may vary depending on equipment and construction) Petrol-hydraulic unit including protective cover mounted in the V-drawbar Gsdpfxsy I E E Ij Am Teui Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (simple retrofit of loading ramps possible) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap holder for easy handling Load securing system for increased flexibility and efficiency in cargo securing, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings on and under the loading area, each loadable up to 1,500 kg and 360° rotatable Side panels completely foldable and removable Rear panel with steel cladding foldable including anti-slip safety for loading ramps Robust angled toggle catches on the side panels 4 plug-in steel corner posts Lighting system with 13-pin connector and reversing light Incl. vehicle documents Possible options and accessories for this trailer: Whether mesh extension, steel extension or side panel extension – choose the right version and customize your build. Thanks to the clever KOMBILINE system, extensions can be easily combined, e.g. a mesh extension at the front and rear can be perfectly combined with a steel or side panel extension on the sides – all without extra effort. Loading ramps Prop stands Load securing net Anti-theft device Registration of your new trailer with the vehicle licensing authority

Condition: new, functionality: fully functional, machine/vehicle number: 208663, empty load weight: 1,190 kg, maximum load weight: 2,310 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 2,040 mm, loading space height: 400 mm, tire size: 185R14C, color: silver, Year of construction: 2024, Equipment: tail-lift, DISCOUNT / ALREADY REDUCED! Lattice extension 650 mm with integrated pivoting support in the corner profile, 4-sided, ILxIB 3660x2040 mm, type UH, UDK Aluminum loading ramps, 2560x300 mm, load capacity 2800 kg/pair, and a pair of sturdy, swiveling support legs for 13/14 inch wheels UNSINN toolbox made of plastic, splash-proof, mounted under the loading platform, on the right side in the direction of travel, Internal dimensions LxWxH 430x180x188 mm Frame -Torsionally rigid longitudinal beam chassis (longitudinal beams run continuously from the drawbar to the lighting beam) for high tracking accuracy -Closed, fully welded and hot-dip galvanized steel frame profile for optimum stability -Integrated ramp compartment with clamping device and folding license plate holder for safe and elegant storage of the loading ramps under the loading platform -With maintenance support to secure the tilted platform during maintenance work Support wheel -Reinforced, automatically retracting support wheel mounted on a separate cross member with a load capacity of 500 kg for secure parking of the trailer -Maneuvering handle with practical strap winder for easy handling Loading platform & platform -Solid steel floor extending across the entire vehicle width Gjdpfx Amsrmlzhe Tsui -Platform with maximum number of cross members for particularly high point loads Load securing -Patented Spinlock load securing system for more flexibility and efficiency in load securing, DEKRA certified -Lashing eyes flush-mounted in the steel floor, symmetrically arranged -Lashing eyes on and under the loading platform can be loaded with up to 1500 daN (kg) each and can be rotated 360° -Pot magnet with key ring for pulling out the lashing eyes when the side panel is open Side panels -Solid steel side panels (400 mm), foldable and removable on all four sides, with zinc-plated angle lever locks and an integrated net and tarpaulin rail, powder-coated in black-gray (RAL 7021) -Four plug-in steel corner posts for high loads as well as easy loading and attachment of accessories Hydraulics -Protected-mounted electric hydraulic system with battery and powerful charger for long service life -Manual pump included with matching socket insert for convenient and easy tilting with the cordless screwdriver in case of low battery Electrical system -Lighting with 13-pin connector and protected-mounted tail lights for long and safe operation of the electrical components -Cable routing in the longitudinal members of the chassis —> protection against external influences, therefore particularly durable

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. A welded subframe makes the tipping trailer very stable. The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Guedpfx Amjqv Ec Ho Tsi Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: new, *AVAILABLE IMMEDIATELY* Includes: E & emergency hand pump, full steel floor Equipment: - 18 lashing points - Battery charger - Electric pump Guodpfx Aozugh Usm Tji Net price: €8,277.31 / Gross price: €9,850.00 Article number: UDK235422011.01 Technical data: • Brand: Unsinn • Model: UDK 4220-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 426 x 204 x 35 cm • External dimensions (L x W x H): 575 x 221 x 120 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,140 kg • Payload: 2,360 kg • Chassis: Low loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber suspension axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Attachment option at all 4 corners for tarpaulin frames, grille attachments, side wall attachments or front wall extension • Sturdy toggle lever locks • Full steel floor, 3 mm hot-dip galvanized - extremely robust • Drawbar and frame, hollow profile construction welded together and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All cross and longitudinal members rest on the ground • 18 lashing eyes countersunk in the steel floor, (symmetrically distributed), with pot magnet (1,500 DaN/kg) • U-profile on the rear, for easier placement of the ramps • Ramp compartment • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency pump, manual, incl. socket insert, for tipping by hand when the battery is empty • Removable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber suspension axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg • Premium jockey wheel with ratchet strap roller _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, functionality: fully functional, machine/vehicle number: 7500010, empty load weight: 450 kg, overall weight: 1,400 kg, loading space length: 3,050 mm, loading space width: 1,570 mm, loading space height: 1,940 mm, tire size: 185/65 R14, color: white, trailer brake: trailer braked, Year of construction: 2025, DISCOUNT / ALREADY REDUCED! Dimensions Total weight 1,400 kg Internal body dimensions 3,050 × 1,570 × 1,940 mm Loading height 530 mm Payload 950 kg Tires 185/65 R14 Gusdpexwanaefx Am Tei Support wheel Reinforced automatic support wheel with a load capacity of 500 kg for safely parking the trailer Body Walls made of in-house manufactured, weight-optimized Unique Panels for a significant increase in payload, consisting of a GRP-steel-sandwich in traffic white (RAL 9016) High-quality, smooth GRP exterior coating (seamless) with gelcoat sealing for individual lettering & decals —> Advantage of gelcoat sealing: the outer skin does not yellow, protection against UV radiation Interior lining made of robust sheet steel for high impact resistance and stability Roof light for an optimally illuminated interior in daylight Rear frame and edging profiles made of anodized aluminum profiles Double-leaf rear doors with aluminum hinges, opening dimensions: 1500 x 1900 mm Lockable stainless steel swivel latch and door fastener made of stainless steel 2 maneuvering handles mounted on the front wall profile Load securing Lashing system with adjustable lashing eyes in the floor profile for flexible load securing 8 lashing eyes, each with a load capacity of up to 300 daN (kg) Rod lashing rail for lashing straps and locking bars mounted on the side walls & the front wall at a height of 900 mm.

Condition: new, 9927499 Guodpfx Amey I R Two Tei Promotional Trailer Special Offer for Stock Vehicle from Year of Manufacture 2022 without Initial Registration Manufacturer: Unsinn Model: PK 3048-13-2400 Internal dimensions: 4860 x 2400 x 2300 mm (L x W x H) Permissible total weight: 3.0 t Unladen weight: approx. 1845 kg Payload: approx. 1155 kg (Payload may vary depending on equipment and configuration) Exterior color: silver RAL 9006 Sales flap with gas struts on the right (vehicle direction) (4000 x 2200 mm W x H) Sales flap with gas struts at the rear (2200 x 2200 mm W x H) Both sales flaps fitted with robust, lockable cam locks Lower section of both sales flaps with tarpaulin skirt for splash protection, allowing closure of the flaps with platform extended Tarpaulin triangle between the sales flaps Hook bar for closing the sales flaps Hinged advertising board with gas struts mounted on the roof (4260 x 1100 mm W x H) Folding stage with aluminum treadplate on the right (vehicle direction) (3940 x 1000 mm L x D) Detachable rear stage (secured with toggle clamps) with aluminum treadplate (2200 x 1000 mm L x D) Detachable corner intermediate platform (secured with toggle clamps) with aluminum treadplate (1150 x 1150 mm L x D) Plug-in aluminum guardrail along the stage sections Fold-down staircase on the right (vehicle direction) Front wall with rounded extension made of GRP Two wooden intermediate shelves with safety edge in the storage area within the rounded extension offering additional storage space (max. load: 50 kg) Two rows of flush-mounted aluminum airline tracks in the floor Two rows of LED light strips in the exhibition area One row of centrally mounted LED light strips each at the side flap and rear flap Light switch and three double power sockets Distribution box incl. RCD and fuses 3 m connection cable with CEE/Schuko plug Two flagpole holders mounted on the left-hand side (vehicle direction) Two aluminum telescopic flagpoles, adjustable 2.2 m - 6.0 m, incl. 1.5 m crossbar Tyres: 195/50 R 13 C Aluminium rims 4 robust crank supports for secure and rapid leveling of the trailer Unique, torsion-resistant longitudinal beam chassis Hollow profile construction, fully welded and hot-dip galvanized Automatic jockey wheel, load capacity 500 kg Loading platform made from multi-bonded screen-print board, 18 mm, slip-resistant and waterproof Lighting with 13-pin plug and reversing light Thermo-sandwich construction Iso 40 Marker lights For individual equipment requests or special interior fittings for this trailer, please feel free to contact us. Possible options and accessories for this trailer: Wheel shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer at the vehicle registration office

Condition: new, 9936754 Firewood trailer with sliding floor unloading system Manufacturer: Unsinn Type: USB-3519-35-13 Internal dimensions: approx. 3500 x 1900 x 1300 mm L.W.H. External dimensions: approx. 5230 x 1970 x 1870 mm L.W.H. Permissible total weight: 3500 kg Unladen weight: approx. 1080 kg Payload: approx. 2420 kg (payload specifications may vary depending on equipment and design) Volume: 8 cubic meters (bulk volume) Efficient unloading system using a sliding floor Funnel-shaped inlet of the loading area towards the sliding floor Movable shaft for tightening the chain at the front of the vehicle Rigid shaft with drive at the rear of the vehicle Integrated weighing system with simple operation and display via an app on the smartphone Rear gate made of smooth aluminum profiles with a transverse rotating bar lock and gas springs for easy opening Anodized, fixed bulkheads made of smooth aluminum profiles, ideally suited for advertising wraps Toolbox on the drawbar with two compartments, one of which contains the electro-hydraulic unit Drive: Electro-hydraulic via an electro-hydraulic pump with wireless remote control, mounted and protected in an aluminum toolbox on the V-drawbar Special AGM battery with battery level indicator 220 V charger integrated Charging cable to the towing vehicle with charge management system Rear view camera and cargo area camera with wireless transmission to the screen, LCD screen in the towing vehicle with a size of 7 inches Two additional reversing lights at the rear 13-pin connector Cable routing in the longitudinal members of the chassis, thus protected from external influences and particularly durable Tire size 185 R14 C Steel frame completely welded and hot-dip galvanized Guedpo Af D T Hofx Am Tsi V-drawbar with welded support wheel traverse Automatic support wheel Robust sheet metal fenders Two practical maneuvering handles at the front of the body Including vehicle documents The flat tarpaulins shown are not included in the standard scope of delivery and are not included in the price. Possible options and accessories for this trailer: 100 km/h approval Flat tarpaulin with roll-up springs and storage compartment on the front panel Flat tarpaulin with a robust Klepp frame for particularly easy and quick handling Full LED lighting Spare wheel incl. holder Theft protection Drawbar cover Registration of your new trailer at the road traffic office

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall Gsdsym Ihhjpfx Am Tsui * Loading height 550 mm Errors and prior sale reserved

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 900 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Grated sides, three-way tipper" Three-way tipper with a corrugated grating superstructure from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! This flatbed trailer, designed as a three-way tipper, is equipped with electric hydraulics for tipping. The folding and removable side walls allow for easy loading of the trailer from the side and rear using a forklift, wheel loader, or by hand. A welded, hot-dip galvanized steel frame makes the tipper trailer very stable. The tipper with grated sides is equipped with folding and removable side walls, a solid steel floor, electro-hydraulic system, automatic support wheel, lashing eyes, welded hot-dip galvanized frame, rail system, and a very stable V-drawbar. For an additional charge, tipper accessories such as side wall extensions, tarpaulin and frame, flat tarpaulin, net, box, loading ramps, and supports are available. ----- Guedpfsg Un Dzjx Am Tsi With us, you can also get: · Financing · Leasing (for commercial customers only) · Consultation · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repair · TÜV inspection for car trailers Car trailer center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, 9936475 Box trailer with double-wing rear door, side door, and Unsinn roof rack system Manufacturer: Unsinn Type: UKU 301519-14-14 Internal dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 1400 kg Unladen weight: approx. 435 kg Payload: approx. 965 kg (payload specifications may vary depending on the equipment and design) Loading height: approx. 530 mm Rear door with double wings and aluminum hinges Side door on the right side when facing the direction of travel Roof rack system can carry up to 100 kg while driving. When stationary, up to 400 kg can be loaded onto the roof The front wall also offers additional transport options with a load capacity of up to 50 kg Crossbars on the roof can be positioned flexibly Pre-fabricated hole pattern for the practical attachment of load securing systems such as airline rails or eyelets The roof rack system also opens up completely new possibilities in the leisure sector. It is ideal as a base for roof tents and other outdoor equipment, making the trailer a flexible companion for travel, camping, and spontaneous adventures. Roof rack powder-coated, crossbars galvanized Rear door with double wings and aluminum hinges Door latch made of stainless steel Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Guodpjz Nbd Dofx Am Tsi Smooth GRP exterior walls for optimal labeling/foil application of the trailer (Unique-Panel) Steel-coated interior walls ensure high impact resistance Loading area made of multi-layer glued plywood 18 mm, non-slip and waterproof Lashing system with 8 movable lashing points for optimal load securing Rod lashing rail on the side walls and on the front wall, height 900 mm Transparent skylight with high light transmission Rear frame and edge profiles made of special anodized aluminum profiles Magnetic, pivoting LED interior light including motion sensor (can be positioned anywhere in the interior) Automatic jockey wheel, load capacity 500 kg 13-pole plug and reversing light Interior fan prevents condensation Side marker lights at the front Two maneuvering handles on the front wall Includes vehicle documents Possible additional options and accessories for this trailer: Spare wheel Theft protection Locking bar Individual interior design Registration of your new trailer at the vehicle registration office

Condition: new, 9936842 Three-way tipper with electric pump & battery-powered screwdriver pump and side panel extension Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 1100 mm L x W x H Loading height: approx. 770 mm Permissible total weight: 3500 kg Gujdo Agd Hlspfx Am Tji Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload specifications may vary depending on equipment and design) The innovative hinge solution of the KombiLine allows the extensions to be easily folded down with just a few simple steps. This makes loading and unloading the trailer particularly ergonomic, easy, and time-saving. Electro-hydraulic pump with emergency pump, pump-less, for easy tilting with the battery-powered screwdriver when the battery is low. Integrated battery charger with 230 V plug. Battery and pump unit securely stored and protected from dirt in the battery box. Integrated ramp compartment with clamping device and folding license plate holder for storing ramps under the loading platform (for easy retrofitting of ramps). Maintenance support for securing the tilted platform during maintenance work. Unique, torsionally rigid longitudinal frame for safe driving characteristics and high stability. Closed, fully welded, and hot-dip galvanized steel frame profile. Solid steel floor extending across the entire vehicle width. Reinforced automatic support wheel. Maneuvering handle with practical strap winder for easy handling. Load securing system for more flexibility and efficiency in load securing, DEKRA certified. 10 lashing eyes mounted flush in the steel floor. Lashing eyes on and under the loading platform, each with a load capacity of up to 1500 kg and 360° rotatable. Side panels completely foldable and removable. Rear side panel with steel cladding, foldable, including anti-slip protection for ramps. Robust angle lever locks on the side panels. 4 plug-in steel corner posts. Lighting with 13-pin connector and reversing light. Incl. vehicle documents. Possible options and accessories for this trailer: Aluminum ramps Load securing net Supports Anti-theft device Registration of your new trailer at the road traffic office.

Condition: new, 9936257 Motorcycle trailer Manufacturer: Unsinn Type: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm L.W.H. Permissible total weight: 1800 kg Payload: approx. 1310 kg (payload specifications may vary depending on equipment and design) Unladen weight: approx. 490 kg Loading height: 460 mm Unique, torsion-resistant longitudinal frame for safe driving characteristics, completely hot-dip galvanized Gjdjz R H D Tspfx Am Tsui Body made of sturdy steel profile on 3 sides Continuous ramp allows loading across the entire width of the loading area 100 km/h version With self-adjusting brake Continuous ramp allows loading across the entire width of the loading area Foldable license plate holder mounted Sturdy plastic fenders mounted Safe and quick lashing around the outer frame 1 lashing ring on the loading area, centered at the rear Reinforced, automatic support wheel for securely parking the loaded trailer Made of multi-layer glued screen printing plywood, 18 mm, continuous without joints, non-slip and waterproof Ramp angle in lowered position approx. 5° Lighting with 13-pole plug and reversing light Hand pump with hydraulic lowering mechanism and lowering safety device (only for braked version) Incl. vehicle documents Possible additional options and accessories for this trailer: Motorcycle stand Removable aluminum side wall extension 400 mm Tarpaulin cover 1500 and 1700 mm in various colors Winch stand without winch Manual winch 900 kg Spare wheel holder for AS series with mounting material Spare wheel 175/70 R13 Electro-hydraulic system mounted in container with battery and charger, without emergency hand pump Foldable lashing rings Motorcycle tie-down straps * Registration of your new trailer at the road traffic office

Condition: new, 9936486 Box trailer with double-wing door and side door Manufacturer: Unsinn Type: UKU 301519-20-13 Door Internal dimensions: 3050 x 1570 x 1940 mm L x W x H Permissible total weight: 2000 kg Unladen weight: approx. 520 kg Payload: approx. 1480 kg (payload specifications may vary depending on equipment and design) Loading height: approx. 530 mm Rear door with double wings and aluminum hinges Door latch made of stainless steel Side door on the right-hand side when traveling Two slatted vents Color: white RAL 9016 Unique, torsion-resistant aluminum chassis for safe driving characteristics Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Smooth GRP exterior walls for optimal lettering/foil application on the trailer (Unique-Panel) Steel-coated interior walls ensure high impact resistance Loading area made of multi-layer laminated screen-printing plywood 18 mm, non-slip and waterproof Lashing system with 8 adjustable lashing eyes for optimal load securing Godpfx Aoz Naz Ujm Teui Rod lashing rail on the side walls and front wall, height 900 mm Transparent roof with high light transmission Rear frame and edging profiles made of special anodized aluminum profiles Magnetic, pivoting LED interior light including motion sensor (can be positioned anywhere in the interior) Automatic jockey wheel, load capacity 500 kg 13-pole connector and reversing light Contour lights at the front Two maneuvering handles on the front wall ALKO coupling head with underrun protection incl. vehicle documents Possible additional options and accessories for this trailer: Spare wheel Theft protection Locking bar Wheel shock absorbers incl. 100 km/h Support legs Individual interior fittings Registration of your new trailer with the road traffic authority

Condition: new, 9936473 Box trailer with rear ramp and door on the driver's side (FR = Fahrtrichtung = direction of travel) Manufacturer: Unsinn Type: UKU 301519-20-13 Ramp Door Dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2000 kg Unladen weight: approx. 565 kg Payload: approx. 1435 kg (payload specifications may vary depending on the equipment and design) Walls made of lightweight panels with GRP steel sandwich construction Loading ramp with gas spring assist, dimensions 1420/1570 x 1940 mm, with transverse rotating bar lock, non-slip surface, load capacity approx. 500 kg Door on the side, on the driver's side (when facing the direction of travel), door hinged on the left, dimensions: 1710 x 750 mm Color: white RAL 9016 Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Smooth GRP exterior walls for optimal lettering/foil application on the trailer Steel-covered interior walls ensure high impact resistance Loading area made of multi-layer glued screen-printed plywood 18 mm, non-slip and waterproof Gedoz Nartspfx Am Teui Lashing system with 8 movable lashing eyes for optimal load securing Lashing rail on the side walls and front wall, height 900 mm Transparent roof light with high light transmission Rear frame and edging profiles made of special anodized aluminum profiles Magnetic, swiveling LED interior light incl. motion detector (can be positioned anywhere in the interior) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reversing light Side marker lights at the front Two maneuvering handles on the front wall ALKO coupling head with underrun protection Incl. vehicle documents Possible additional options and accessories for this trailer: Spare wheel Shock absorber for the wheels incl. 100 km/h certificate Sliding supports mounted at the rear Individual interior design

Condition: new, 9936729 Box trailer with double-wing rear door, side door, and Unsinn roof rack system Manufacturer: Unsinn Type: UKU 301519-20-13 Door Internal dimensions: approx. 3050 x 1570 x 1940 mm L x W x H Permissible total weight: 2000 kg Unladen weight: approx. 520 kg Payload: approx. 1480 kg (payload specifications may vary depending on equipment and design) Loading height: approx. 530 mm Rear door, double-wing, with aluminum hinges Door latch made of stainless steel Side door on the right side when facing the direction of travel Color: white RAL 9016 Roof rack system can carry up to 100 kg while driving. When stationary, up to 400 kg can be loaded on the roof The front wall also offers additional transport options with a load capacity of up to 50 kg Crossbars on the roof can be positioned flexibly Pre-drilled holes for the practical attachment of load securing devices such as airline rails or eyelets The rack system also opens up completely new possibilities in the leisure sector. It is ideal as a base for roof tents and other outdoor equipment, making the trailer a flexible companion for travel, camping, and spontaneous adventures Rack powder-coated, crossbars galvanized Rear door, double-wing, with aluminum hinges Door latch made of stainless steel Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Gedj Aa Hf Iepfx Am Tjui Smooth GRP exterior walls for optimal lettering/foil application on the trailer (Unique-Panel) Steel-coated interior walls ensure high impact resistance Loading area made of multi-layered glued screen printing panel, 18 mm, non-slip and waterproof Lashing system with 8 adjustable lashing eyes for optimal load securing Rod lashing rail on the side walls and on the front wall, height 900 mm Transparent roof window with high light transmission Rear frame and edging profiles made of special anodized aluminum profiles Magnetic, pivoting LED interior light incl. motion sensor (can be positioned at any location in the interior) Automatic jockey wheel, load capacity 500 kg 13-pin connector and reversing light Interior fan prevents the formation of condensation Side marker lights at the front Two maneuvering handles on the front wall Incl. vehicle documents Possible additional options and accessories for this trailer: Spare wheel Anti-theft device Locking bar Individual interior design Registration of your new trailer at the vehicle registration office

Condition: new, empty load weight: 380 kg, maximum load weight: 920 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, total length: 3,920 mm, total width: 1,780 mm, total height: 2,110 mm, suspension: other, color: white, trailer brake: trailer braked, Unsinn WEB K 251215-13-13 T web40 web42 Very robust box trailer with a roof window and excellent lashing system. Technical data: Permissible total weight 1300 kg Payload 920 kg Braked, single-axle Box interior dimensions 255 x 128 x 153 cm Clear frame dimensions at the rear (W x H) 121 x 149 cm Overall dimensions 392 x 178 x 211 cm Tires 165R13, new tires Loading height 55 cm Equipment: Axle and drawbar galvanized, maintenance-free rubber suspension axle Extremely torsion-resistant aluminum chassis with 2 additional transverse supports for safe driving characteristics Floor: 18 mm phenolic resin plywood, continuous, non-slip, waterproof Lashing rail on 3 sides at the base of the wall (number of lashing eyes as required – accessories!) Walls: Plywood elements with PP surface (dirt-repellent, color white, similar to RAL 9010) Box protected against water Rear frame and edging profiles made of special aluminum profiles, anodized Transparent roof window Light bar with protected, mounted multi-function lights Support wheel standard Additional components can be easily attached thanks to the system profile rail Electrical system 12V, 13-pin plug, reversing light Single-piece rear door, hinged on the left, swivel rod latch with lock, rubber seal Gujdpfezcy Apox Am Tsi > OR, for an extra charge, ramp with lifting aids Various accessories available (prices on request): Folding lashing eyes for base rail, quantity as required Ramp instead of rear doors, with lifting device, interior aluminum diamond-plate flooring Rear supports for existing system rail Theft protection, various designs Loading ramps Motorcycle stand and loading ramp Motorcycle stop for front wheel or swingarm

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel Equipment: - Aluminum side panels - 4 lashing eyes - Shock absorbers + 100 km/h approved Net price: €1,924.37 / Gross price: €2,290.00 Article number: UNK113251435.01 Technical data: • Brand: Unsinn • Model: UT 2514-13-14 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 250 x 140 x 35 cm • External dimensions (L x W x H): 407 x 192 x 90 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 230 kg • Payload: 1,070 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Yes DESCRIPTION • Aluminum side panels, anodized, double-walled • Side panel, foldable at the front and rear • Side panel, removable at the front and rear • Locks for tailgate recessed in the profile • Screen-printed plywood floor, 15 mm, continuous without joint, non-slip and waterproof • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Sturdy tubular drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel extensions, or front panel extension • 4 lashing eyes, recessed, foldable into the side wall (300 DaN/kg) • Maintenance-free rubber spring axle from ALKO Gusdpfx Aszy A Rpsm Tsi • Wheel shock absorbers fitted for 100 km/h version incl. data sheet • Reverse automatic • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center with maneuvering handle _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired features! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, 9936840 Three-way tipper with electric pump & battery-powered screwdriver pump, loading ramps, and supports Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (payload specifications may vary depending on equipment and design) Electro-hydraulic pump with emergency pump, pump-less, for easy tipping with the battery-powered screwdriver when the battery is low Integrated battery charger with 230 V plug Battery and pump unit securely stored and protected from dirt in the battery box Aluminum loading ramps 2560 x 300 mm with a load capacity of 2800 kg per pair Integrated ramp compartment with tensioning device and folding license plate holder for storing the loading ramps under the loading platform Stable drop-down supports Unique, torsion-resistant longitudinal frame for safe driving characteristics and high stability Closed, fully welded, and hot-dip galvanized steel frame profile Solid steel floor extending across the entire vehicle width Support strut for securing the tipped platform Reinforced automatic jockey wheel Towing handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency in load securing, DEKRA certified 10 lashing eyes recessed and mounted in the steel floor Lashing eyes on and under the loading platform, each with a load capacity of up to 1500 kg and 360° rotatable Side panels completely foldable and removable Rear side panel with steel cladding, foldable, including anti-slip protection for loading ramps Robust angle lever fasteners on the side panels 4 pluggable steel corner posts Lighting with 13-pole plug and reversing light Includes vehicle documents Possible options and accessories for this trailer: Side panel extension Grid extension Load securing net Anti-theft device Registration of your new trailer with the vehicle registration office Guodo Agt N Sjpfx Am Toi