Used Unsinn Low Loader Trailers (Construction Machinery) for sale (149)

Condition: new, Lowerable trailer – ideal for transporting motorcycles Manufacturer: Unsinn Model: UA 3118-18-13 Internal dimensions: approx. 3150 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1,800 kg Unladen weight: approx. 440 kg Payload: approx. 1,360 kg (Payload figures may vary depending on equipment and configuration) Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe handling, fully hot-dip galvanised Three-sided body made of robust steel profiles Continuous loading ramp allows access over the entire width of the loading area Shock absorbers incl. 100 km/h certification Automatically adjusting brakes Foldable license plate holder mounted Robust plastic mudguards fitted Safe and fast load securing via tie-down points along the outer frame 1 lashing ring mounted centrally at the rear of the loading area Reinforced automatic jockey wheel for safe parking when trailer is loaded Loading platform made of multi-bonded phenolic plywood, 18 mm thick, seamless, slip-resistant and water-resistant Dujdoy Nb Nlopfx Apbsu Ramp angle when lowered: approx. 5° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering system and lowering lock (only available with braked version) Including vehicle documents Optional equipment and accessories for this trailer: Motorcycle wheel chock Motorcycle tie-down straps Drop side extension Winch Spare wheel including holder Anti-theft device * Registration of your new trailer at the vehicle registration office

Condition: new, Lowerable trailer with extremely flat ramp angle Manufacturer: Unsinn Model: UA 3118-15-13 Motorcycle trailer, machine transporter Gross vehicle weight: 1,500 kg Unladen weight: 455 kg Payload: approx. 1,045 kg (payload may vary depending on equipment and configuration) Dimensions: 3,150 x 1,800 x 150 mm Dedoy Nb H Dopfx Apbouu Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized 3-sided body made of sturdy steel profile Shock absorbers incl. 100 km/h type approval Continuous ramp allows loading across the entire width of the loading area Foldable license plate holder installed Durable plastic mudguards installed Reinforced, automatic jockey wheel for safe parking of the loaded trailer Loading surface made of multi-layer, phenolic resin-coated plywood, 18 mm thick, seamless, anti-slip and waterproof Fast and secure lashing possible around the outer frame 1 lashing ring on the loading surface, rear center Ramp angle when lowered approx. 6° Lighting with 13-pin connector and reverse light Hand pump with hydraulic lowering device and mechanical lowering safety lock Tires: 195/50 R13C Braked Incl. vehicle documents Available options and accessories for this trailer: Spare wheel incl. holder Anti-theft lock Registration of your new trailer with the road traffic authority

Condition: new, Lowerable box trailer with side door and aerodynamic slant from Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKA 3717-18-13 Internal dimensions: 3750 x 1770 x 1940 mm (L x W x H) Permissible total weight: 1800 kg Duedpfx Aey Nb Egspbju Unladen weight: approx. 680 kg Payload: approx. 1120 kg (payload may vary depending on equipment and configuration) Walls made from lightweight composite panels (GRP-steel sandwich) Colour: white RAL 9016 Aerodynamic front slant Swivelling LED interior light with motion sensor Unique Panels with smooth external GRP coating for easy application of decals/wraps Steel-coated interior walls for high impact resistance Translucent roof for maximum daylight entry Shock absorbers including 100 km/h type approval Robust steel frame with tubular drawbar, fully hot-dip galvanized Rear frame and edging profiles made from anodized aluminium Reinforced automatic jockey wheel with practical manoeuvring handle Rear tailgate opens upwards Heavy-duty stainless-steel bar lock on the tailgate (lockable) Side door (1600 x 750 mm) with heavy-duty stainless-steel bar lock (lockable) and aluminium hinges Rubber lip on tailgate protects the interior from splash water Continuous loading ramp allows easy, safe loading across the entire trailer width Load floor made of continuously laminated anti-slip and waterproof phenolic plywood, 18 mm thick, seamless Ramp angle in lowered position: approx. 5° Extremely flat ramp angle allows easy loading with a pallet truck 6 fold-down lashing rings on the sides inside Lighting system with 13-pin plug Position/marker lights Two manoeuvring handles at the front Incl. vehicle documents Optional equipment and accessories for this trailer: Side lashing rails Load bars for optimal cargo securing Spare wheel including holder Anti-theft device Registration of your new trailer at the vehicle licensing office

Condition: used, Nearly new trailers from our extensive rental fleet! 9930809 Lowerable box trailer by Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKA 3717-18-13 Internal dimensions: 3750 x 1770 x 1940 mm (LxWxH) Gross weight: 1800 kg Unladen weight: approx. 680 kg Payload: approx. 1120 kg (Payload figures may vary depending on equipment and construction) Walls made of lightweight GFRP-steel sandwich panels Colour: white RAL 9016 Swivelling LED interior light with motion sensor Unique panels with smooth GFRP coating on the exterior for easy wrapping Steel-coated interior walls for high impact resistance Transparent light roof providing excellent light transmission Shock absorbers including 100 km/h approval certificate Durable steel frame with tubular drawbar, fully hot-dip galvanised Rear frame and edging profiles made of anodised aluminium Reinforced automatic jockey wheel with convenient manoeuvring handle Upward-opening tailgate Duedey Nb Axopfx Apbju Robust stainless steel drop bolt lock on tailgate (lockable) Rubber lip on the tailgate protects the interior from spray water Continuous loading ramp enables easy and secure loading across the entire trailer width Load floor made from multiple-bonded birch plywood, 18 mm, seamless, anti-slip and waterproof Ramp angle when lowered: approx. 5° Extremely low ramp angle allows easy access with a pallet truck 6 side-folding lashing rings inside Lighting with 13-pin plug Marker lights Two front manoeuvring handles First registration: 09.02.2024 Workshop inspected Optionally with new TÜV inspection Available options and accessories for this trailer: Side lashing rails Load-securing bars for optimal cargo safety Spare wheel including mount Anti-theft device Registration of your new trailer with the vehicle registration office

Condition: new, Motorcycle Trailer Duodpfx Ajy I Eiyopbou Manufacturer: Unsinn Model: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1,800 kg Payload: approx. 1,300 kg (payload values may vary depending on equipment and build) Unladen weight: approx. 500 kg Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized in immersion bath Body features 3-sided sturdy steel profile construction Continuous drive-on ramp enables access across the entire loading platform width 100 km/h version With self-adjusting brakes Continuous drive-on ramp enables access across the entire width of the loading area Foldable license plate holder installed Sturdy plastic mudguards mounted Safe and quick lashing possible all around the outer frame 1 lashing ring located centrally at the rear of the loading platform Reinforced, automatic jockey wheel for stable support of the loaded trailer 18 mm multi-bonded phenolic plywood floor, seamless, slip-resistant and waterproof Ramp angle approx. 5° when lowered Lighting with 13-pin connector and reverse light Hand pump with hydraulic lowering system and safety lock (available only on braked version) Including vehicle documents Optional equipment and accessories for this trailer: Motorcycle stand 400 mm removable aluminium side wall extension High canvas cover 1500 mm and 1700 mm in various colours Winch bracket without cable winch 900 kg hand winch Spare wheel holder for AS series incl. mounting kit Spare wheel 175/70 R13 Electrohydraulics installed in container with battery and charger, without emergency hand pump Foldable lashing rings Motorcycle tie-down straps * Registration of your new trailer at the licensing authority

Condition: used, Used lowering machine transporter Manufacturer: Unsinn Type: AS 826-13-1550 Dimensions: 2600 x 1550 x 150 mm (L x W x H) Permissible total weight: 750 kg Loading height: 310 mm Lashing point on the loading area centrally at the rear Reinforced automatic support wheel Ramp angle in lowered position approx. 13° Duodpfey I Eafjx Apbsu Lighting with 13-pin plug and reverse light First registration: 26/04/2016 Workshop-inspected With new TÜV on request

Condition: new, maximum load weight: 2,380 kg, overall weight: 620 kg, Year of construction: 2024, Information in German Unsinn UB 3016-30-14 (old designation: UBA 3030-14-1600) First-class low loader for transporting construction machinery, 2380 kg payload, total weight 3000 kg, Loading area: 3,060 x 1,600 x 300 mm, 2 swivel-mounted and laterally adjustable aluminum drive-on ramps with integrated floor support, Drive-on ramps can be swiveled to the side, 10 pairs of load securing points, optional bucket support. The construction machine shown is not included in the scope of delivery. Subject to errors and prior sale! Further information External dimensions: 0.00306x0.0016x0.3 Country of production: DE Duedpfxevw I Tbj Apbou Please contact Philip Müller , , p-) for further information.----Information in English Vehicle's outer dimensions: 0,00306x0,0016x0,3 Rental currency: EUR Production country: DE Please contact Philip Müller , , p-) for more information

Condition: new, maximum load weight: 2,730 kg, overall weight: 580 kg, Year of construction: 2024, First-class low-loader for transporting construction machinery. Top model UBA 3618-35-14 (previous designation: 3536-14-1800) with a payload of 2,730 kg. Total permissible weight: 3,500 kg. Loading area: 3,660 × 1,800 × 300 mm. Side-adjustable aluminium loading ramps; access ramps can be swung out to the side; new condition. Optional: 100 km/h shock absorbers (+200 Euros) Optional: Bucket rest or other accessories The construction machine shown is not included in the scope of delivery. Subject to errors and prior sale! Dusdpsvrbvfjfx Apbeu Further information: Front tyre size: 185R14C Rear tyre size: 185R14C Production country: DE Please contact Philip Müller, p-) for more information.

Condition: used, maximum load weight: 2,680 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 06/2017, next inspection (TÜV): 02/2026, loading space length: 3,630 mm, loading space width: 1,800 mm, loading space height: 300 mm, Unsinn UBA 3536-14-1800: Internal dimensions: 3.63 m L x 1.80 m W x 0.30 m H Dsdpfx Apexdpuvobeuu * 3500 kg permissible total weight

Condition: used, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/2019, loading space length: 3,090 mm, loading space width: 1,800 mm, loading space height: 1,800 mm, loading space volume: 10 m³, * 20560 - Vehicle ID for telephone inquiries * 3-axle tandem trailer, construction machinery trailer * Type: UBA 3030-14-1800 * Ball coupling * Overrun brake * Adjustable ramps Dujdpfxoy Sdv To Apbsu * Galvanized * Storage boxes * Tarpaulin body ----Our email address:     Our service for you:       - Procurement of short-term or export license plates       - Transport / delivery throughout the EU       - Customs clearance for vehicles exported to non-EU countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German, and other languages:

Condition: new, empty load weight: 620 kg, maximum load weight: 2,380 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,600 mm, loading space height: 300 mm, tire size: 185 R14 C, Tandem Car and Construction Machinery Trailer, Manufacturer: Unsinn, Model: UB 3016-30-14, Internal dimensions approx. (LxWxH): 3060 x 1600 x 300 mm, Gross vehicle weight: 3,000 kg Duedpfx Ajx Ev Tqopbou Equipment: - Chassis with maintenance-free rubber suspension axles, galvanized - 185 R14 C tires - Steel mudguards - V-drawbar, galvanized - Overrun brake with automatic reverse and ball coupling - Jockey wheel with solid rubber tire and metal rim - 12V lighting system with 13-pin connector and reversing lights - Torsion-resistant chassis - Floor made from multi-bonded phenolic-coated anti-slip, waterproof plywood - Side walls made of robust steel sidewall profiles, approx. 300 mm high - 20 lashing points in the body - 2 foldable, side-adjustable, and side-swivelling aluminum ramps (Images may show optional accessories subject to surcharge. Errors, changes, and omissions excepted!)

Condition: new, overall weight: 3,000 kg, loading space length: 4,260 mm, loading space width: 2,040 mm, Year of construction: 2026, At ANHÄNGERWIRTZ, many models are available online. Conveniently purchase online around the clock at trailershop.de. Pick up yourself or have it delivered. The online pickup market for your new trailer offers top brand manufacturers! Over 850 new trailers in stock. Over 130 used trailers constantly available. Non-binding example: Buy Multi Machinery Trailer / New Trailer Multitransporter PKLx208cm, 3000kg, braked, tandem high-bed, low chassis, 10" light alloy wheels, tiltable flatbed with dual-action hand hydraulics, 35cm folding aluminum side panels all around (including front), continuous loading ramp 100cm high with lifting aid, fold-out DIN lashing brackets on the chassis edge, automatic jockey wheel..... Only online while stocks last! Sales & phone order acceptance during the following times: Duedpfx Apsy Nz Hdsbsu MON - FRI during our business hours Or 24/7 via our online shop at trailershop.de 04/26 Copyright - PKL LA Dortmund

Condition: new, empty load weight: 770 kg, maximum load weight: 2,730 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.9 m³, color: silver, construction height: 2,030 mm, working width: 2,300 mm, Automatic reverse drive, drive-on ramps, hot-dip galvanizing, swivelling rear ramps, 12 lashing eyes, * IMMEDIATELY AVAILABLE * incl. swivelling rear ramps / 12 lashing eyes / drive-on ramps Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 770 kg - Payload: 2,730 kg - Interior dimensions: 360 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 558 x 230 x 203 cm (LxWxH) - Loading sill height: 45 cm - Tyres: 185R14C steel rims - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 30 cm - Chassis: ALKO rubber spring axle - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 14 - Overrun device & brake: ALKO - Frame/chassis: welded, hot-dip galvanized steel frame - Attachment: at an extra charge Lashing eyes: 22 pieces laterally in the frame (2000kg/daN) - Supports: integrated in ramps - Ramps: 2x aluminum upright on shaft and swiveling - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Novelty with ramps that can be folded away to the side for loading with forklift frame - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Hollow profile construction welded and completely hot-dip galvanized - Body made of sturdy steel side wall profiles - Reinforced, automatic jockey wheel, for safe parking of the loaded trailer, load capacity 500 kg, anti-slip grid covering and integrated support feet - Premium maneuvering handle with tensioning strap retractor - 12 pairs of load securing points with a load capacity of up to 2000 daN per lashing point - Frame completely hot-dip galvanized - 2 lashing points, completely welded in an immersion bath hot-dip galvanized - 2 fold-down and laterally adjustable aluminium ramps with integrated floor support, ramps can be swivelled to the side, with a load capacity of 3500 kg/pair - automatic reversing system - ALKO overrun device and parking brake - sturdy locks for ramps - 13-pin plug - reversing lights - large rear lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel - Approval papers: ZBII and COC papers Special equipment included in the price: - Alu swivel ramps rear Accessories can be retrofitted - please enquire: - bucket storage - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - sheet metal attachment closed 60cm - spare wheel - storage box - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinx Duodju Hrkaspfx Apbeu

Condition: new, 9935090 Box trailer with double-wing door and side door Manufacturer: Unsinn Type: UKU 301519-20-13 Door Duedozb Sp Espfx Apbou Internal dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2000 kg Unladen weight: approx. 520 kg Payload approx. 1480 kg (payload specifications may vary depending on equipment and design) Loading height approx. 530 mm Rear door with double wings and aluminum hinges Door latch made of stainless steel Side door on the right side when facing forward Color: white RAL 9016 Unique, torsionally rigid aluminum chassis for safe driving characteristics Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Smooth GRP outer walls for optimal labeling/foil application of the trailer (Unique-Panel) Steel-coated inner walls ensure high impact resistance Loading area made of multi-layer glued screen-printed plywood, 18 mm thick, non-slip and waterproof Lashing system with 8 adjustable lashing eyes for optimal load securing Rod lashing rail on the side walls and front wall, height 900 mm Transparent skylight with high light transmission Rear frame and trim profiles made of special anodized aluminum profiles Magnetic, pivoting LED interior light incl. motion sensor (can be positioned anywhere in the interior) Automatic support wheel, load capacity 500 kg 13-pole connector and reversing light Position lights at the front Two maneuvering handles on the front wall ALKO coupling head with impact protection incl. vehicle documents Possible additional options and accessories for this trailer: Spare wheel Theft protection Locking bar Wheel shock absorbers incl. 100 km/h approval Sliding supports Individual interior design Registration of your new trailer at the vehicle registration office

Condition: new, 9935930 Rotating platform trailer from Unsinn Fahrzeugtechnik, as a 3-axle model Djdoza Nfnspfx Apbsuu The trailer has a day registration but is new and unused! Manufacturer: Unsinn Type: UD-3 8424-35-13 Bed dimensions: 8460 x 2440 x 350 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 1410 kg Payload: 2090 kg (Payload figures may vary depending on equipment and design) Low loading height due to 195/50 R13 C tires 3-axle chassis ensures exceptional ride stability Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics Hollow profile construction, welded and completely hot-dip galvanized 16 sturdy lashing points integrated into the frame on the sides (8 per side) 10 additional lashing eyes under the loading area Aluminum side walls that can be folded down on all sides Side walls and corner posts can be removed without tools Internal long-stroke latches made of metal Loading area made of multi-layered, non-slip screen-printed plywood, 18 mm thick Adjustable stabilizer spring for the drawbar 13-pin plug Outline lights Including vehicle documents Possible additional options and accessories for this trailer: Wheel shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Theft protection Registration of your new trailer at the vehicle registration office Load securing net incl. net hooks mounted on the side wall Retractable loading ramps

Condition: used, maximum load weight: 2,217 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, total width: 1,810 mm, total height: 930 mm, A46 GW260N0161390 High loader trailer manufacturer: Unsinn, Type: UH 3617-26-10, Gross vehicle weight 2,600 kg, overrun braked, 100 km/h, 10" aluminium rims, aluminium side wall... and much more. Product information: "Unsinn UH 3617-26-10", 100 km/h version, shock absorbers installed. Chassis: Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics Djdpfxjyqdtbj Apbjuu * Hollow section construction, welded and fully hot-dip galvanized Axles, braked model: AL-KO braking system Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Load securing: 8 foldable lashing recesses, recessed in the floor frame profile * 8 lashing rings under the loading surface * Vehicle not prepared Errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,530 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 01/2025, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 1,600 mm, total width: 1,565 mm, total height: 1,600 mm, A65 GW26M0146957 High-bed trailer, tandem axle, with premium tarpaulin and frame construction (internal height 160 cm), manufacturer Unsinn, model WEB H 2715-20-13, gross vehicle weight 2 t, with inertia brake, 100 km/h. Vehicle not refurbished. Subject to errors and prior sale. Duodpfx Aeyqdqaepbsu

Condition: used, maximum load weight: 1,090 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 1,560 mm, total width: 1,580 mm, total height: 300 mm, A61 GW26M0146902 High loader trailer with premium tarpaulin and frame (internal height 160 cm), manufacturer Unsinn, type WEB H 2315-13-10, gross vehicle weight: 1,300 kg, overrun brake, 100 km/h ...and much more. Dusdpjyqdppsfx Apbsu Subject to errors and prior sale.

Condition: used, maximum load weight: 649 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,100 mm, loading space width: 1,100 mm, loading space height: 650 mm, total width: 1,555 mm, total height: 900 mm, A63. GW26M0140819 Low-loader trailer by Unsinn, type UT 2111-7-13, Gross weight: 750 kg, open box, 100 km/h rating Errors and prior sale excepted. Dusdeyqdnfspfx Apbou

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Djdpfx Apjyqdmzebjuu Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Vehicle not prepared Errors and prior sale excepted.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,500 mm, loading space width: 1,358 mm, loading space height: 1,918 mm, total width: 1,920 mm, total height: 2,475 mm, A20 GW26P0201504 Refrigerated box trailer by Unsinn, type UKT6C 251319-13-14 Gross weight: 1,300 kg, low-loader, 4x heavy-duty support legs, overrun brake, equipped with GOVI air conditioning unit, model Arktik 1600N. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics Dujdpfjyn Ug Tsx Apbju Axles (braked version): AL-KO braking system Body: Thermo-sandwich construction * Inner and outer skins made of galvanized and powder-coated steel sheet for robust durability * PU-core insulation * Double-wing rear doors with aluminum hinges * Lever-lock and stainless-steel door retainer for the cooling compartment * Rear frame and edging profiles made of anodised special aluminum profiles for attractive aesthetics * All-around 3-sided impact protection Vehicle not refurbished Subject to errors and prior sale

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Anodised double-wall aluminium side panels • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks Dodpeyn Uhwofx Apbsuu • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.

Condition: used, maximum load weight: 2,123 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 08/2022, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 350 mm, total width: 1,647 mm, total height: 748 mm, Year of construction: 2022, A37 GW26N0159988, Rear tipper by Unsinn, type UHK 2627-14-1500, tandem axle, gross vehicle weight 2,600 kg, platform trailer, overrun brake, 100 km/h, aluminium side panels, pumpless cordless screwdriver pump. Subject to errors and prior sale. Dsdpfeyn Uc Uex Apbouu

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Dodpoyn Uc Ijfx Apbeuu Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,475 mm, A19 GW26P0201501 Refrigerated box trailer, manufacturer: Unsinn, model UKT 6°C 2513-13-14, dimensions: 2500x1350x1900 mm Refrigeration unit manufacturer: GOVI, model Arctik 1600N, serial no. 230317666A, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg Chassis: Dedpsyn Udrsfx Apbeuu Unique, torsion-resistant aluminium frame for safe driving characteristics Axles, with braked version: AL-KO brake system Body: Thermo-sandwich construction * Inner and outer panel made of hot-dip galvanized and powder-coated steel sheet for robust use * Insulation: PU core * Rear double-wing door with aluminium hinges * Refrigerated compartment pressure lever lock and stainless steel door retainer * Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance * All-round three-sided impact protection Subject to errors and prior sale