Used Meusburger Special Purpose Semitrailers for sale (51)

Condition: used, first registration: 04/2016, Year of construction: 2016, MEUSBURGER – Extendable / Gooseneck – Special semi-trailer for machine transport Hydraulically extendable to 5 m!! Interior height of 3.5 m possible!! • Year of manufacture: 2016 • Semi-trailer is electro-pneumatically extendable to 5 meters • No vehicle hydraulics required – the vehicle has an electro-pneumatic pump! • Interior height: 3,250 mm (3,730 mm possible!) • External dimensions: 13,810 x 2,550 x 4,000 mm • Internal dimensions: 13,480 (gooseneck 3,480 mm + low-bed platform 10,000 mm) x 2,490 x 3,250 mm • EDSCHA cover • Electric/hydraulic lifting roof • Anodized/galvanized frame! • Sliding guides • 2 x lashing rail on the side • 2 x lashing rail in the center • 2 x 9 foldable lashing rings on the side of the low-bed • 2 x 4 lashing rings in the gooseneck • 4 x twin-tire and air-suspended BPW - ECO PLUS axles • Electrically steerable • Disc brakes • Aluminum rims • 1st axle can be lifted • 3rd + 4th axle steerable – friction-steered! • Tire size: 205/65 R 17.5 • Tire tread depth (per axle): 10/10/11/10; 10/7/11/10; 6/6/10/11; 9/10/8/7 mm • BEKA – Central lubrication system • GVWR: 38,800 kg • Unladen weight: 11,250 kg • Payload: 42,000 kg - German semi-trailer! - FULLY MAINTAINED: all services and repairs were carried out in a specialist workshop!! - 1st owner! - TÜV/emission test on request and at an additional cost: new! Errors and prior sale excepted! Hodszy Adpepfx Ap Hent = Further information = Unladen weight: 11,250 kg

Condition: new, empty load weight: 8,500 kg, maximum load weight: 40,500 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, Equipment: ABS, Chassis: -Sturdy steel frame welded construction with front frame cranking and flat loading area, rear taper approx. 500x100 mm Hnsdpewu Agisfx Ap Het -Frame neck 200 mm with beveled corners -Beveled end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) -2 king pin positions with interchangeable 2” king pin -Outer frame closed to the outside as a perforated outer frame for lashing with tie-down straps -Reinforced frame design / point load at center of gravity -Provisions for extendable widening of the loading area -With excavator recess, depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underrun protection = extended end plate -Drop supports at the rear Ramps: -2 single-piece aluminum loading ramps with spring assist -Length x width approx. 2,500 mm x 600 mm -Can be secured in transport position with tie-down straps -Laterally manually adjustable Floor: -35 mm larch wood floor with aluminum omega profiles Landing gears: -Mechanical 24 t landing gears with single-side operation and load compensation Axles, steering, and tires: -BPW air suspension axles, each 10 t axle load, air bag diameter 360 mm -S-cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjusters -Lift and lowering device with total lift approx. 200 mm -2nd driving position via ball valve +50 mm -1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via push button on the trailer -3rd axle as self-steering trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, with center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Incl. tire pressure monitoring Brake system: -Dual-line brake with EBS-E incl. RSS -EBS (WABCO 4S3M) -Spring-actuated parking brake -Air connection yellow / red Painting: -Steel grit cleaning, sprayed galvanizing of chassis and primer -Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau -Plastic parts black, unpainted -Rims: factory silver -Reflective strips on the sides and rear in yellow Accessories: -Side and rear plug-in side walls on gooseneck approx. 400 mm high -Spare wheel holder -Aluminum approach guard -4 wheel chocks -Steel fenders with Clear-Pass -Elongated license plate bracket in the end plate -1 removable ECE sign at rear -11 pairs ZK modules 10t on the side: -2x on gooseneck -9x on loading area -Without rear towing eyes -Extendable warning panels incl. 3 position lights each, at the front on the landing gears and at the rear before the end plate, infinitely extendable up to loading width 4,500 mm -4 plug-in mounts for warning panels in stake pockets on the loading area -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x in front of and 1x after king pin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward to main frame (1x at the front section, 1x before 1st axle, and 1x after 3rd axle) -2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection

Condition: used, maximum load weight: 36,300 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2019, loading space length: 13,100 mm, loading space width: 2,550 mm, Equipment: ABS, * Permissible total weight: 45,000 kg, technically possible: 48,000 kg * Last axle is steerable * Winch type: Sigma 17.5 * Hydraulic scissor lift * Drum brake * Duomatic connection * ABS * Air suspension Hnjdozu Utrjpfx Ap Het * 5 storage compartments * EBS * Support legs * Twin tires * BPW axles All information without guarantee / subject to change.

Condition: used, empty load weight: 9,450 kg, maximum load weight: 15,550 kg, first registration: 11/2003, next inspection (TÜV): 05/2025, total length: 14,000 mm, total width: 25,500 mm, total height: 40,000 mm, suspension: air, tire size: 385 / 65 R 22.5 / 11mm, front tire size: 385 / 65 R 22.5 / 11mm, operation weight: 25,000 kg,

Condition: used, functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 27,500 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2014, loading space length: 13,650 mm, loading space width: 2,520 mm, loading space height: 3,150 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 205.65 r 17.5, ground clearance: 750 mm, color: light green, trailer brake: trailer braked, Year of construction: 2014, Equipment: ABS, Used Meusburger lowboy semi-trailer with drop-side extensions, 4 axles with steerable 3rd and 4th axles, 1st axle liftable, recesses in the platform with removable covers, extendable and height-adjustable drop sides, sliding roof cover, rear doors, provision for removable rear ramps, lateral and internal floor lashing points, anchor points for uprights with crossbars running through the platform, tarpaulins suitable for over-width loads with retractable side panels, internal height 3.10m + additional 40cm in the recesses, year 2014, rear stabilizer legs, DEALER: INTERDRIVE SRL-PARMA. Hnodpfxey T Rurs Ap Hjt

Condition: used, overall weight: 49,000 kg, axle configuration: 3 axles, first registration: 03/2011, Equipment: ABS, Vehicle identification number: W09TS300990M49248 TELESCOPIC, extending by 4,300 mm SLIDING TABLE WHEEL WELLS Unladen weight: 9,000 kg Next inspection due Kingpin height: 3,650 mm - Saddle height: 1,250 mm Low-bed: Length: 9,430 mm (of which 1,830 mm is sloped) – Width: 2,540 mm – Loading height: 890 mm Hitching device Supports Outrigger lights Hedpsyx N Eysfx Ap Hsnt Front saddle load: max. 19,000 kg Technically permissible axle loads: 3 x 10,000 kg BPW Eco Plus axles with drum brakes Axle 1 = LIFTABLE 2 toolboxes Tires: 235/75 R 17.5 Spare wheel holder WITH spare wheel Changes, prior sale, and errors expressly reserved. The description serves only for general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. The description in the purchase agreement is the definitive one. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may have advertising applied and/or be labeled. Our general terms and conditions of delivery and payment apply.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, suspension: hydraulics, tire size: 245/70R17,5, color: green, Year of construction: 2016, = Additional options and accessories = - Central lubrication system = Notes = Meusburger MTS-2. Year: 2016. 12-ton Gigant axles. Weight: 16,250 kg. Load capacity: 26,750 kg. Max. weight: 43,000 kg. Kingpin load: 19,000 kg. 5.4-meter extendable. 2 x 25 widened. EBS ABS ALB. Central greasing system. Radio remote control. Hydraulic system operates from the truck's NATO socket. Hydr. detachable gooseneck. Hydr. suspension. Zinc coated. Power steering on 2 steering axles. Dimensions inside trailer. Neck: L: 3100 mm. W: 2550 mm. H: 1450 mm. Kingpin height: 1150 mm. Floor: L: 7000 mm. W: 2550 mm. H: approx. 400 mm. Floor thickness: 230 mm. Rear of trailer: L: 2800 mm. W: 2550 mm. H: 900 mm. Tyres: 245/70R17,5 80%. ID No.: 529. Hedpfx Apszybzmo Hsnt The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = General information Year of manufacture: 2016 Axle configuration Tyre size: 245/70R17,5 Axle brand: Gigant Suspension: hydraulic suspension Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Weights Unladen weight: 16,250 kg Payload: 26,750 kg GVW: 43,000 kg Functional Extendable body: Yes Condition Technical condition: good Optical condition: good = Company information = For more information:

Condition: used, empty load weight: 9,050 kg, maximum load weight: 29,450 kg, overall weight: 38,500 kg, first registration: 10/2006, next inspection (TÜV): 12/2023, suspension: air, tire size: 385/65R22.5, color: grey, gearing type: other, front tire size: 385/65R22.5, rear tire size: 385/65R22.5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Registration service, HU/SP/UVV, transfer to the port Languages: German, Russian, English, Arabic     Basic color: gray Extras in the equipment ABS, compressed air brake, EBS, air suspension, suspension: air, payload (kg): 29450 Body type: hydraulic slant loader, ready for use, HSN/TSN: Hnsdpfxjww Dque Ap Hjt Video available, own hydraulics 24V (NATO plug) ?si=PIao7Ht7GaZws7-i     Errors excepted.

Condition: used, color: blue, Year of construction: 2012, Meusburger MPS-3. Year: 2012. 10 tons BPW axles. Weight: 12,500 kg. Load capacity: 32,500 kg. Max weight: 45,000 kg. Kingpin load: 15,000 kg. 7 meters extendable. Hydraulic system powered by the truck’s NATO coupling. Hjdozya Ifopfx Ap Hjnt Central lubrication system. Radio remote control. ABS EBS ALB. Roof height adjustable. Power steering on 3 steering axles. Air suspension. Twistlocks. Sliding roof. Internal dimensions: L: 13,590 mm. W: 2490 mm. H: Internal: 2900 mm. H: Floor: 1120 mm. Tires: 235/75R17.5, 60% tread. Nice trailer! ID No.: 614. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of construction: 2012 Unladen weight: 12,500 kg Payload: 32,500 kg GVWR: 45,000 kg Extendable superstructure: Yes Price: On request = Company Information = For more information:

Condition: excellent (used), functionality: fully functional, empty load weight: 11,700 kg, maximum load weight: 33,300 kg, overall weight: 48,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 07/2019, total length: 13,980 mm, total width: 2,550 mm, total height: 3,630 mm, suspension: air, tire size: 235/75R17,5, wheelbase: 1,310 mm, maximum speed: 90 km/h, color: orange, trailer brake: trailer braked, Year of construction: 2019, Equipment: ABS, MEUSBURGER MTS-3 Low loader trailer, single owner, workshop maintained, and in very good condition! New TÜV inspection, Hjdpfx Aozv Ianjp Hjnt 3x BPW ECO axles with air suspension, 1 axle can be lifted, 3rd axle as a friction-guided trailing axle with electric and mechanical lock. Steering of the 3rd axle via two hydraulic cylinders to enable maneuvering using a remote control, Total weight (2-axle configuration) 48,000 kg, Total weight (3-axle configuration) 57,000 kg, Payload (2-axle configuration) 28,500 kg, Payload (3-axle configuration) 36,000 kg Fifth wheel load 18,000 kg, Rear axle load 30,000 kg, Unladen weight 11,700 kg, Overall width 2,550 mm, Length of gooseneck platform approx. 3,950 mm, front bevel approx. 500x56 mm, Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm, Loading height approx. 920 mm, Fifth wheel coupling height approx. 1,150 mm, Front outrigger supports, Hydraulic rear supports powered by an electro-hydraulic unit for the ramps, Distance between supports 1,310 / 1,410 mm, Central grease lubrication system with electric pump, LED work lights, Floor: Pressed grating 30/30/5 mm (hot-dip galvanized) over the entire loading area in the low bed, ramps, and on the upper platform, Ramps: 2-part ramps in special design with mechanical extension, length approx. 2,850 + 1,850 mm, with a maximum slope of 8°. Ramp width approx. 800 mm, can be slid together in the middle to approx. 50 mm. Hydraulically adjustable laterally to an overall width of 2,750 mm. Load capacity 25 tons. Ramp operation via hydraulic pump unit. Power supply via NATO socket, Hydraulically liftable ramp on the gooseneck, approx. 3,450 mm long for accessing the upper bed over the entire vehicle width, with a load capacity of 10 tons, 4x PVC toolboxes 600/450/400 mm, Electric winch RUNVA 24 Volt, 8.0 tons pulling force, with steel cable 25m x 12 mm, with hook, incl. cable guide window and remote control, Total of 64 heavy-duty lashing rings (8 tons), Paint: RAL 2002 blood orange, Tires 235/75R17.5 13/13/13/13 mm 9/6/9/9 mm 10/10/10/10 mm, Upon request, leasing/financing options are available - quick processing, even without a down payment! More information and requirements on request. The vehicle description is for general identification of the vehicle only. The information, images and descriptions are without guarantee! Equipment must be checked separately if necessary. The seller assumes no liability for any typing and data transmission errors. Errors and prior sale are reserved. Thank you for your interest! We look forward to your visit. Our SERVICE: We will gladly accept your used vehicle in part exchange, Customs license plates for 30 days including insurance, EUR-1 + all customs documents for export, TÜV / SP / UVV / Tachograph inspection / OBU installation, Professional transport to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement, Retrofitting of additional attachments and other individual customer requirements possible by arrangement.

Condition: used, color: green, Year of construction: 2017, Meusburger MTS-4. Year: 2017. 8-ton BPW axles. Weight: 10,510 kg. Load capacity: 39,490 kg. Max. weight: 50,000 kg. Kingpin load: 18,000 kg. 4-meter extendable. 1st axle is a lift axle. 3rd and 4th axles are steering axles (trailing axles). Zinc-coated. Twist locks. Air suspension. EBS ABS ALB. Dimensions, floor: Neck: L: 3900 mm. W: 2540 mm. H: 1100 mm. Kingpin height: 1000 mm. Floor: L: 9620 mm. W: 2540 mm. H: 800 mm. Tires: 205/65R17.5, 80% remaining. German trailer! Hedpfx Aoztvhnjp Hjnt ID No.: 623. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2017 Unladen weight: 10,510 kg Payload: 39,490 kg GVWR: 50,000 kg Extendable superstructure: Yes = Company information = For more information:

Condition: used, empty load weight: 10,100 kg, maximum load weight: 38,900 kg, overall weight: 49,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, Year of construction: 2025, You will receive an up-to-date and complete inspection and functional report with each used semi-trailer. Chassis: - Stable steel frame welded construction with front frame curve and level loading area with a bevel at the rear, approx. 500x100 mm - Fifth wheel neck 200 mm with beveled corners - Beveled end of the gooseneck, approx. 500 x 100 mm (grip strips on the outer frame in the area behind the rear bevel) - 2 fifth wheel positions with a replaceable 2" fifth wheel - Outer frame closed outwards as a hole outer frame for lashing with tension straps (chains not possible) - Reinforced frame design / point load in the center of gravity - Preparations for extendable wideners in the loading area - With excavator bucket (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle - 1 pair of wheel arches in front of the axle with steel covers - (Covers with Kora-Pur coating), depth approx. 400 mm and 1 pair of wheel arches between the 1st and 2nd axles with steel covers - Underrun protection = extended end plate - Rear outrigger supports Ramps: - 2-part loading ramps in a special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with a hydraulic ramp lifting system (only in conjunction with an electro-hydraulic unit) - Width approx. 800 mm - Wood decking - Incl. grip strips on the loading ramps - Lockable with tension straps in the driving position - Operated by means of a control lever mounted on the right-hand side at the rear in the direction of travel - Hydraulically movable laterally Floor: - 35 mm larch wood floor with aluminum omega profiles Support legs: - Mech. 24 t support legs with single-sided operation and stroke compensation Axles, steering and tires: - BPW air suspension axles, 10 t axle load each, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic linkage equalizer - Lifting and lowering device with a total lift of approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via button on the semi-trailer - 3rd axle as a friction-jointed trailing axle with electrical and mechanical locking - 12 steel disc wheels, 10-hole, with inset depth center-mounted - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - On the gooseneck, side boards and rear panel can be plugged in, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks including holder - Longitudinal license plate holder in the end plate - 1 ECE sign can be plugged in at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 9x on the loading area - Extendable warning signs incl. 3 position lights each, at the front on the fifth wheel support legs and at the rear in front of the end plate, can be extended steplessly up to a loading width of 4,500 mm - 4 pieces of holders for warning signs that can be plugged into the stake pockets on the loading area Hedpfxozabnbs Ap Hont - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of stake pockets across the gooseneck for plug-in stakes 100x50 mm from the outer frame inwards to the main frame (1x in front of and 1x behind the fifth wheel positions) - 3 rows of stake pockets across the loading area for plug-in stakes 100x50 mm from the outer frame inwards to the main frame (1x in the front area, 1x in

Condition: used, empty load weight: 8,900 kg, maximum load weight: 40,100 kg, overall weight: 49,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, Year of construction: 2025, Equipment: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report. Chassis: - Robust welded steel frame construction with front frame drop and flat loading area, rear taper approx. 500x100 mm - Neck height 200 mm with front rounded corners - Sloped end of the gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area of rear slope) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed outward as perforated outer frame - Loading area with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame before and after separation with 80x80 mm step - Reinforced frame design / point load supported in retracted position at center of gravity - Without extendable load width extensions, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle, steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate Hedpfx Aoywv Ixop Hent - Drop supports rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device, total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-bolt, center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear wall on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in the end plate - 1 plug-in ECE sign at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 2x on the loading area before extension - 7x after extension - Without tow rings at the rear - Extendable warning boards incl. 3 position lamps each, at the front at the landing gears and at the rear in front of the end plate, infinitely extendable up to load width of 4,500 mm - 4 plug-in holders for warning boards in stake pockets on the loading area - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 transverse rows of stake pockets for insertable stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for insertable stakes 100x50 mm on the loading area from outer frame to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (= cable routing of NATO cables and hole pattern for optional mounting of NATO socket at front on end plate as well as holder on vehicle) for optional future installation of an electro-hydraulic unit, right rear in direction of travel, for possible ramp operation The trailer is optionally available with aluminum loading ramps.

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: Hnodpfxsiu Eu Ns Ap Hot - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: used, empty load weight: 19,880 kg, maximum load weight: 40,120 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 03/2021, loading space length: 7,700 mm, loading space width: 2,850 mm, loading space height: 350 mm, tire size: 245/70 R 17,5, color: grey, Year of construction: 2021, Equipment: ABS, Chassis: -Steel frame welded construction with front and rear frame extensions and a flat, level low-bed platform without a slope -Front corners chamfered, 400 mm x 400 mm -Low-bed with two extendable frames, extension length approx. 5,400 mm, 1x 400 and then 500 mm each, pneumatically lockable -Locking at 1,833 mm for 30 ft containers -Locking at 4,900 mm for 40 ft containers Hnsdpjzd Tdzjfx Ap Hot -Adjustable intermediate support, approx. 500 mm wide, used only when the vehicle is extended (without intermediate support in the retracted state) -Fifth wheel plate with replaceable 2" and 3.5" kingpins -Max. point load: 50 tons on 4 m in the retracted state -Continuous excavator recess over axle assembly with foldable aluminum cover -2 covers lockable, each 1,500 mm long. Rear area with fixed aluminum cover for electro-hydraulic system and central lubrication system -Mechanical pin-latch coupling in the rear area of the low-bed for pre-tensioning in the bed Gooseneck: -Hydraulically lowerable and height-adjustable gooseneck -Support on the tractor unit via two hydraulic cylinders. Operation via the electro-hydraulic unit -Mounting on the gooseneck in a combined design for mounting the low-bed platform and the drop axle unit -Gooseneck with switching function for different fifth wheel loads (18/24 tons) Axles, Steering, and Tires: -Gigant low-loader half-axles, 12 tons axle load each -Hydraulic suspension, stroke approx. 300 mm, ride height hydraulically adjustable -S-cam brake 300/150 mm, asbestos-free brake linings -Automatic linkage adjuster -Track 1,995 mm, axle distance 1,510 / 1,510 mm -Control lever for suspension on the left + right rear -1st axle (drop axle unit) hydraulically forced-steered via fifth wheel coupling -2nd, 3rd and 4th axles hydraulically forced-steered via fifth wheel coupling and axle stub axle -Electro-hydraulic follow-up steering via the electro-hydraulic unit of the lowerable gooseneck with power supply from the towing vehicle via NATO socket -Control cable and socket at the front and rear on the end plate -Cable remote control and additionally with radio remote control -13 / 17 tires 245/70 R 17.5 146/146F, tubeless Drop Axle Unit: -1-axle, can be mounted between gooseneck and low-bed -Half-axle with 12 tons axle load, hydraulic suspension -4 tires -Brake lines are connected via coupling heads, hydraulic lines via a multi-coupling (6-way) -Axle can be lifted by means of shut-off valve and locking pin Accessories: -Front wall = steel sheet toolbox, 600 mm high, 550 mm deep over the entire width with a top cover as well as side covers left + right -Corners adapted to the front slope -Side walls 25 mm aluminum hollow profiles, 600 mm high, 1-piece, up to 500 mm in front of the low-bed, foldable -Plug-in aluminum rear wall and plug-in corner posts at the rear at the height of the side rails -Elongated license plate holder on the end plate -2 ECE warning signs on the end plate -3 pairs of recessed lashing rings on the high platform with a tensile force of 4 tons each, mounted approx. 1,500 mm from the front -3 pairs of heavy-duty lashing rings with a tensile force of 13.4 tons each, of which -1 pair is attached to the high bed, and 1 pair each is attached to the middle part of the high bed at the front and rear on the longitudinal beam slope -Foldable wideners on both sides in the low-bed to a total width of 3,000 mm -Extendable warning signs, infinitely extendable up to a loading width of 5,000 mm -1 pair of aluminum ramps, approx.

Condition: used, overall weight: 61,000 kg, axle configuration: 3 axles, first registration: 08/2010, Equipment: ABS, Semi-trailer – Vehicle identification number: W09PG3009A0M49815 – First registration: 25.08.2010 DOLLY – Vehicle identification number: W09PG3009A0M49816 – First registration: 25.08.2010 HYDRAULIC SYSTEM DE HU (German technical inspection) due Tare weight: Trailer: 16,850 kg – DOLLY: 2,240 kg Fifth wheel height: 1,280 mm – Interchangeable kingpin – 3.5" Front turning radius approx. 1,640 mm ----Hydraulically lowerable and height-adjustable gooseneck – Length 3,750 mm Low-bed: Length: 6,850 mm Width 2,750 mm – Loading height: approx. 350 mm TELESCOPICALLY EXTENDABLE by 4,000 mm WIDTH-ADJUSTABLE up to 3,210 mm Chassis frame: Length: 4,100 mm Width 2,750 – Loading height: approx. 1,035 mm Overall length: 14,700 mm Excavator trough – Bucket arm trough Central lubrication system GIGANT axles – PENDULUM AXLES with drum brakes with remote control 3 x hydraulically sprung and forced-steering axles Axle loads 3 x 12,000 kg Fifth wheel load max. 25,000 kg Tires: 245/70 R 17.5 Matching 1-axle DOLLY BPW Eco axle with drum brake Air-sprung Changes, prior sales and errors expressly reserved. The description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract shall prevail. Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Hnjdpfx Aewxi Nrop Het

Condition: used, maximum load weight: 21,700 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 03/2009, Equipment: ABS, Vehicle identification number: W09PJ300980M49179 Hedpfxsw Nt T Uo Ap Hsnt Meusburger MPJ-3 - First registration: 03.03.2009 German MOT (TÜV) inspection due BPW Eco axles with drum brakes Adjustable trailer drawbar - eyelet 40 mm - coupling height approx. 350 mm PLATFORM BODY WITH WHEEL WELLS - with mounting rails for aluminum ramps, WITHOUT RAMPS!!! Platform length: 2,850 + 5,000 mm, width: 2,550 mm Loading height in the lowered position: 870 mm Central lubrication system Toolbox Tires: 235/75 R 17.5 Changes, prior sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase agreement is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 3,110 mm, total length: 14,200 mm, total width: 2,580 mm, total height: 4,100 mm, suspension: air, tire size: 305/65R17,5, color: other, Year of construction: 2006, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Lifting Roof - Tail Lift = Notes = Number of axles: 4, Unladen weight: 11,480 kg, Gross weight: 48,600 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inches, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2006, Lifting roof, Sliding roof, Low-loader type: Semi low-loader, Loading area length: 995 cm, Gooseneck length: 365 cm, Axle platform length: 315 cm, Axle brand: BPW, Tail lift, Tail lift type: Rear flap, Tail lift material: Steel, Battery for ramp, SEMI WITH CURTAINS / BIG HYDRAULIC RAMP / LAST TWO AXLES STEERED = Further Information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tyre size: 305/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Lift axle; Tyre tread depth left inner: 10 mm; Tyre tread depth left outer: 9 mm; Tyre tread depth right inner: 9 mm; Tyre tread depth right outer: 9 mm Axle 2: Twin tyres; Tyre tread depth left inner: 6 mm; Tyre tread depth left outer: 9 mm; Tyre tread depth right inner: 11 mm; Tyre tread depth right outer: 11 mm Axle 3: Twin tyres; Steered; Tyre tread depth left inner: 10 mm; Tyre tread depth left outer: 9 mm; Tyre tread depth right inner: 8 mm; Tyre tread depth right outer: 9 mm Axle 4: Twin tyres; Steered; Tyre tread depth left inner: 6 mm; Tyre tread depth left outer: 7 mm; Tyre tread depth right inner: 7 mm; Tyre tread depth right outer: 8 mm Weights Unladen weight: 11,480 kg Payload: 37,120 kg Gross vehicle weight (GVW): 48,600 kg Functional Tail lift: Rear flap o Sliding roof: Yes Environmental Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognisable quality • Good prices • Reliable business practices • Multilingual staff Hodozt Ifxopfx Ap Hent • We understand our customers • Import and transport support • (Export) registration plates quickly arranged • Professional technical services • The safety of “recognisable quality” • And much more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask directly about our European warranty package.

Condition: used, color: red, Year of construction: 2018, Meusburger MTS-3. Hjdpfx Aszybrxop Hont Year: 2018. 10-ton BPW axles. Weight: 11,700 kg. Load capacity: 36,300 kg. Max. weight: 48,000 kg. Kingpin load: 18,000 kg. 1st axle: lift axle. 3rd axle: steering axle. Air suspension. Slotted floor. Winch. Hydraulic bridge, extending from the gooseneck. Length: 3,420 mm. Hydraulic system operates on NATO power from the truck. 2-point hydraulic outriggers at the rear. 2-way hydraulic ramps: - Hydraulic operation from left to right. - Length: 4,600 mm. Toolboxes. Dimensions: Gooseneck: L: 3,750 mm. W: 2,550 mm. H: 1,440 mm. Kingpin height: 1,200 mm. Floor: L: 9,730 mm. W: 2,550 mm. H: 900 - 950 mm. Tires: 70%. German trailer! ID No.: 408. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of construction: 2018 Unladen weight: 11,700 kg Payload: 36,300 kg GVW: 48,000 kg = Company Information = For more information:

Condition: used, color: green, Year of construction: 2017, Meusburger MTS-4. Year: 2017. 8-ton BPW axles. Max. weight: 50,000 kg. Kingpin load: 18,000 kg. 4-meter extendable. EBS ABS ALB. Twistlocks. Air suspension. 3rd and 4th axles are steering axles (trailing axles). Zinc-coated. Dimensions: L: 3950 mm. W: 2550 mm. H: 1100 mm. Hedszybmvepfx Ap Hent Kingpin height: 1000 mm. Floor: L: 9600 mm. W: 2550 mm. H: 800 mm. Tires: 205/65R17.5, 70%. Mega - Low-bed trailer! ID No.: 466. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2017 GVWR: 50,000 kg Extendable superstructure: Yes = Company Information = For more information:

Condition: used, color: red, Year of construction: 2018, Meusburger MTS-3. Year: 2018. 10-ton BPW axles. Weight: 11,700 kg. Load capacity: 36,300 kg. Maximum weight: 48,000 kg. Kingpin load: 18,000 kg. Hydraulic system from the trailer operates on NATO standard. Winch. Slotted floor. 1st axle is a lift axle. 3rd axle is a steering axle (friction-steered – trailing-steered). Air suspension. Hydraulic bridge from floor to gooseneck. - Length: 3450 mm. Hnedpfx Ajzybzajp Hot Toolboxes. 2-way hydraulic ramps: - Hydraulic operation from left to right. - Length: 2700 + 1900 mm. EBS ABS ALB. Dimensions: Gooseneck: L: 3730 mm. W: 2550 mm. H: 1350 mm. Kingpin height: 1150 mm. Floor: L: 9750 mm. W: 2550 mm. H: 900 mm. Radio remote control + remote control on cable. Tires: 235/75R17.5, 50-80% tread remaining. German trailer! ID No.: 536. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2018 Unladen weight: 11,700 kg Payload: 36,300 kg GVW: 48,000 kg = Company information = For more information:

Condition: used, maximum load weight: 17,120 kg, overall weight: 24,200 kg, axle configuration: 3 axles, first registration: 07/2007, Equipment: ABS, Vehicle Identification No.: W09PT300770M49892 Unladen weight: 7,080 kg German MOT (HU) due BPW Eco axles with drum brakes Axle 1: LIFTABLE Axle 3: SELF-STEERING Air suspension Platform dimensions: 7,900 x 2,540 mm – loading height: 800 mm Overall length according to vehicle registration document: 9,195 – 11,195 mm 2 pairs of wheel recesses incl. extendable cover and loose wooden decking 2 pairs of wheel recesses incl. cover located respectively between 1st & 2nd axle and 2nd & 3rd axle Hjdpfxow Hilpo Ap Hjnt Drawbar hydraulically extendable – eyelet 50 mm Hydraulic rear extension Tyres: 205/65 R 17.5 Spare wheel carrier WITH spare wheel Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a warranty in the legal sense of sales law. The description in the sales contract is binding. Our offer is generally without new technical inspection (TÜV). If a new inspection is required, we will gladly provide a proposal from our partner workshops! Vehicle may feature advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, empty load weight: 4,200 kg, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2009, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 800 mm, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, lifting + lowering, ABS (anti-lock braking system), lashing eyes, U-protection, extendable drawbar, side aluminum driving protection, storage box, pendulum flaps Hsdpjupidhofx Ap Hjnt Construction: 2-axle flatbed trailer with forklift mount 2x 9t BPW axle, disc brakes, 25mm aluminum hollow profiles, device for transportable forklift, extendable drawbar, lashing eyes in the outer frame! Tires approx. 80-90%! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - .

Condition: used, color: red, Year of construction: 2017, Meusburger MTS-3. Year: 2017. 10-ton BPW axles. Max. weight: 38,500 kg. EBS ABS ALB. Hydraulic system from trailer, compatible with NATO. Slotted floor. Hydraulic bridge, floor to neck: - Length: 3450 mm. Winch. Hydr. extendable ramp. Air suspension. 3rd axle, steering axle (caster-steered). Dimensions: Neck: L: 3370 mm. W: 2550 mm. H: 1300 mm. Kingpin height: 1150 mm. Floor: L: 7100 + 2750 mm. W: 2550 mm. H: 900 mm. Tires: 235/75R17.5, 50% remaining. German trailer! ID No.: 528. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2017 GVW: 38,500 kg Price: On request = Company Information = For more information: Hedpszyb Duefx Ap Hent

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,998 kg, first registration: 09/2018, total length: 13,900 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 235/75R17,5, color: green, Year of construction: 2018, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Meusburger MTS-3. Year of manufacture: 2018. 10-ton BPW axles. Unladen weight: 13,300 kg. Payload: 28,200 kg. Gross vehicle weight: 41,500 kg. Fifth wheel load: 11,500 kg. Forced steering (3 steerable axles). Air suspension. Hydraulic 2-point rear support. Slotted floor. Hydraulic ramp from the low-bed to the gooseneck. - Length: 3500 mm. Cable winch with remote control. Remote control for steerable axles, ramps, and supports. Toolboxes. EBS, ABS, ALB. Hydraulic 2-part ramps: - Length: 2900 + 1700 mm. - Hydraulic lateral movement (left/right). Hodezq Actopfx Ap Hjnt 1st axle as a lift axle. Hydraulic supply via NATO socket of the towing vehicle. Dimensions: Gooseneck: L: 3800 mm. W: 2500 mm. H: 1400 mm. Fifth wheel height: 1150 mm. Loading platform: L: 10,500 mm. W: 2550 mm. H: 950 mm. Tires: 235/75R17.5 (tread depth 30–80 %). German semi-trailer! Dimensions of the semi-trailer: L: 13,900 mm. W: 2550 mm. H: 3800 mm. ID No.: 639. Heinhuis's general terms and conditions apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By contacting us in any way, you accept the validity of Heinhuis's general terms and conditions and declare that you have taken note of these conditions. Our prices are net export prices. = Further Information = Axle configuration Tire size: 235/75R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 40% Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80% Rear axle 3: Twin tires; Max. axle load: 9,998 kg; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30% Weights Unladen weight: 13,300 kg Payload: 28,200 kg GVW: 41,500 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = For more information: