Used Schwarzmüller Low Loader Semitrailers (Construction Machinery) for sale (270)

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Cjdpfsz S R R Hex Aaferi Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: used, maximum load weight: 31,880 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2015, Schwarzmülle 4-axle, galvanized low-bed trailer with hydraulic ramps, extendable to 3 m, excavator bucket. Condition: good for its age. Tires: 60-80%. Technical specifications: General: * Brief description: 4-axle low-bed trailer with hydraulic ramps, extendable, galvanized. Cab: Crjdpez Dzi Asfx Aafji * Refrigerator: No Engine: * AdBlue: Yes Transmission: * Retarder: No Chassis: * Aluminum rims: No * Lifting axle: No * Steering axle: No Fifth wheel coupling: * Disabled person's fifth wheel pin: No Documents: * Unladen weight: 8,120 kg

Condition: new, overall weight: 36,700 kg, axle configuration: 3 axles, Equipment: ABS, Schwarzmüller RH240 Jumbo Flatbed Low Loader Semi-Trailer Extendable telescopic design – for building material and construction machinery transport - NEW - UNUSED - Gross vehicle weight rating: 36,000 kg Curb weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width (lower deck) approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central-frame welded construction Extension length 6,000 mm Pneumatically lockable, operation on the trailer + additional position for 40ft container in the well Reinforced design for building material transport, rated for 20 t over 5 m at center of gravity and for construction equipment transport up to 20 t Frame is suitable for the transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for spot loads front and rear at support blocks Reinforced outer frame in the cranked platform 6 mm Reinforced outer frame in the well 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, as stake pocket cross member for 80x80 mm box stakes, as well as 1 pair of 5 t lashing rings on the outside integrated into the intermediate support Frame for 2-axle tractor units, coupling height unladen approx. 960 mm – 1,020 mm with air-suspended tractor 3 pairs front and 10 pairs rear, 10 t lashing rings, extendable at both sides on the outer frame, can also be folded outwards for oversize securing 10 pairs of lashing mushrooms with welded-in round steel on the underside of the outer frame Frame Attachments: 10 pairs of stake pockets with reinforcement for 80x80 mm box stakes, both sides on the outer frame 6 stake pocket cross members for 80x80 mm box stakes 24 steel box section stakes, 80x80x5 mm, effective height approx. 2,000 mm, with lashing holes at top for straps, hot-dip galvanized 3 pairs of container locks in the well platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for drive-on ramps at end of frame Landing Gear: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Self-steering SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse Last axle is trailing steering axle Brakes/Suspension: Brake system by Wabco Brake/air connectors with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with raise/lower function, total lift approx. 200 mm Automatic leveling to programmed ride height above 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes with ignition on Every 24 hours with ignition off Axle load indicator via EBS canbus signal for display in driver's cab (truck must be equipped accordingly) SmartBoard by Wabco for reading data via display (kilometres, axle aggregate load, brake diagnostics, etc.) Floor: 35 mm larch floorboards, impregnated on both sides, fitted longitudinally with small gaps, above the wheels with steel chequer plate covers Front Wall: Credju A Niljpfx Aafoi Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts, integrated into the front wall, bolted on face side 2 lashing points each on the up

Condition: good (used), functionality: fully functional, empty load weight: 6,450 kg, maximum load weight: 23,550 kg, overall weight: 30,000 kg, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2019, next inspection (TÜV): 07/2027, loading space length: 8,500 mm, loading space width: 2,550 mm, total length: 10,580 mm, total width: 3,000 mm, total height: 3,600 mm, suspension: air, tire condition: 70 %, color: orange, trailer brake: trailer braked, Year of construction: 2019, Equipment: ABS, center pivot plate, Equipped with 60 cm drop-side panels, air suspension, and new loading ramps. New slewing ring. New TÜV inspection certificate. Crodpfx Aajzwfw Tefji

Condition: used, maximum load weight: 29,940 kg, axle configuration: > 3 axles, first registration: 03/2011, 4-axle low-loader trailer, Feitzinger VTS 400, with a total weight of 40,000 kg and an unladen weight of 10,060 kg, leaf-sprung suspension. Ramps are foldable and hydraulically operated. Condition: good. Tire condition: 60-80%. Technical specifications: General: * Brief description: Feitzinger VTS 400, 4-axle low-loader, leaf-sprung suspension, with foldable ramps. * Permissible total weight (towing): 40,000 kg Cab: * Refrigerator: No Engine: * AdBlue: Yes Transmission: * Retarder: No Chassis: * Suspension: Leaf spring suspension * Aluminum rims: No * Lifting axle: No * Steering axle: No Fifth wheel coupling: * Fifth wheel for disabled drivers: No Crodpez Dzi Njfx Aafji Documents: * Unladen weight: 10,060 kg

Condition: used, maximum load weight: 15,620 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, first registration: 08/2006, next inspection (TÜV): 08/2026, Year of construction: 2006, Equipment: ABS, First owner Crjdpfs Admygjx Aafei

Condition: used, maximum load weight: 25,660 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2022, Year of construction: 2022, Equipment: ABS, Schwarzmüller RH240 Jumbo Platform Semi-Trailer Low Loader, Daily Registration. Extendable telescopic type – suitable for building materials and construction equipment transport. - Condition: as new - Gross vehicle weight: 36,000 kg Curb weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower platform approx. 2,540 mm Loading height in the low-bed section (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, actuated from the trailer + additional position for 40ft container in the low-bed section Reinforced design for building material transports, rated for 20 t over 5 m at the center of gravity and for construction machine transports up to 20 t Frame suitable for transport of wooden components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point load front and rear at load supports Reinforced outer frame on gooseneck plateau 6 mm Reinforced outer frame in low-bed section 6 mm Tapered cross members Adjustable intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket cross member for 80x80 mm square tube stanchions, and 1 pair of 5 t lashing rings integrated externally in intermediate support Frame suitable for 2-axle tractor units, unladen coupling height approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs, rear: 10 pairs of 10 t sliding lashing rings in the outer frame, both sides, also foldable outward for oversize load securing 10 pairs of lashing mushrooms with welded round steel at the bottom of the outer frame Frame attachments: 10 pairs of plug-in housings with reinforcing beams for 80x80 mm square tube stanchions, both sides of outer frame 6 stake pocket cross members for 80x80 mm stanchions 24 steel square tube stanchions, 80x80x5 mm, useable height approx. 2,000 mm, with lashing holes for tie-downs at the top, hot-dip galvanized 3 pairs of recessed container locks in the low-bed plateau for: - 1 x 20ft container - 1 x 30ft container - 1 x 40ft container in extended state U-profile rail for loading ramps at end of frame Support equipment: Manual steel support winches, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tires 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low-loader axles with drum brakes Axle lift on 1st axle Axle distance 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically engaged in reverse gear Last axle is hydraulically steered Braking system/Suspension: Braking system by Wabco Brake/air connections with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with raise/lower function, total stroke approx. 200 mm Automatic adjustment to programmed driving level from 15 km/h Assistance/Safety systems: Standard reporting interval: - Every 15 minutes with ignition on - Every 24 hours with ignition off Axle load display via EBS CAN-bus signal for display in truck cab (truck must be correspondingly pre-equipped) Wabco SmartBoard for reading out data via display (mileage, axle load, brake diagnostics, etc.) Cjdpeu A Nhnsfx Aafori Floor: 35 mm larchwood floor, impregnated on both sides, longitudinally laid with small gaps, over wheels with steel chequer plate cover Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 center supports 2 front corner pos

Condition: used, maximum load weight: 31,880 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2015, Year of construction: 2015, Schwarzmüller 4-axle, galvanized low-loader trailer with hydraulic ramps, extendable to 3m, with excavator bucket. Cedjz D Rl Hepfx Aafjri Condition: good for its age. Tires: 60-80% tread remaining. ----Technical Specifications: General: ? Brief description: 4-axle low-loader with hydraulic ramps, extendable, galvanized. Cab: ? Refrigerator: No. Engine: ? AdBlue: Yes. Transmission: ? Retarder: No. Chassis: ? Aluminum rims: No. ? Lift axle: No. ? Steering axle: No. Fifth wheel coupling: ? Disabled driver’s fifth wheel pin: No. Documents: ? Unladen weight: 8,120 kg.

Condition: used, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 12/2022, loading space length: 12,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, 4-AXLE LOW-BED SEMI-TRAILER WITH CRANKED DECK Tractor Unit Data and Equipment: 3-axle tractor unit Please check the coupling height under the 'Dimensions' section! No modifications required to the tractor unit Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum free front clearance from center of fifth wheel 2,230 mm = maximum rear swing radius Tractor unit suspension: Air suspension Total permitted gross train weight: 40 t Technical gross weight: 58 t Technical axle assembly load: 40 t Technical fifth wheel load: 18 t Front cranked deck: 3,500 mm Flat loading area (low-bed deck): ca. 7,970 mm Rear access slope: ca. 730 mm Total width: ca. 2,550 mm (with extensions: ca. 3,000 mm) Loaded deck height: ca. 870 mm Unloaded deck height: ca. 900 mm Unloaded coupling height: ca. 1,250 mm When assembling a complete rig, compliance with legally permissible overall height and total train length must be ensured! Steel welded construction with front, sloped frame cranking and rear slope (no central crawler excavator trough) 5 pairs of locking pockets in low-bed for square tube stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings beneath the outer frame – between the axles 4 pairs of recessed 4t floor lashing rings on the cranked platform 7 pairs of recessed, retractable 5t floor lashing rings (10t technical tractive force) in low-bed + 1 pair foldable between 2nd and 3rd axle 1 pair of recessed, retractable 10t floor lashing rings on front crank slope Pair of recessed, fold-up 10t floor lashing rings on longitudinal beam inside, after the 2nd axle 1 pair of recessed, fold-up 10t floor lashing rings on longitudinal beam inside, after front crank Replaceable 2" kingpin 5 pairs of steel square tube stanchions 100x50x5 mm, usable height ca. 1,000 mm, hot-dip galvanized, stanchion locking with pressure mechanism # Permissible stanchion load 1,000 kg/stanchion, with load applied 500 mm above ground Cedpou Uzv Esfx Aafsri Both sides of the low-bed deck extendable with softwood planks 50 mm (the track width of machines to be transported must not exceed the outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation on the right, load compensation, manufacturer selected by factory 2 hydraulic rear supports, individually operated, controls in a separate stainless steel box AF air suspended low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic slack adjusters Axle spacings: 1,310 + 1,310 + 1,310 mm 3rd and 4th axles as stub-axle/low-friction steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, with additional switch in the cab and release valve on trailer Starting aid on 1st axle = speed-limited pressure release, relievable when loaded, operated by pushbutton in cab Mechanical odometer, installed on 2nd axle, right side in direction of travel 16 tyres 245/70 R 17.5, 146/146F (tyre load capacity 12t/axle) 16 steel rims 6.75 x 17.5, with offset, silver (tyre load capacity 12t/axle) 1 spare tyre 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity 12t/axle) 1 steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, 'LOCAL TRAC' performance package ... further details on request! Customs registration plates and insurance available for an additional charge upon

Condition: used, empty load weight: 6,050 kg, maximum load weight: 23,950 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2006, suspension: steel, tire size: 235/75R17,5 143/140J, color: other, gearing type: other, front tire size: 235/75R17,5 143/140J, rear tire size: 235/75R17,5 143/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Cjdpfe Aa N U Sox Aafsri

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment available upon request. Frame * Steel welded construction with front frame curve and rear bevel * Access ramp with excavator bucket recess in the center = recess in the rear between the longitudinal beams * Approximately 2,300 mm long Integrated into the outer frame * 5 pairs of approximately 4-tonne lashing points (4 x in the low bed and 1 x on the raised platform) * 7 pairs of recessed, pull-out approximately 10-tonne lashing rings (4 x in the low bed, 1 x in the access ramp, and 2 x on the raised platform) * Standard ball-bearing swivel frame attachments * Extendable widening elements on both sides of the low bed platform with softwood boards, approximately 50 mm thick * (The track width of the construction machinery to be transported must not exceed the outer frame width of approximately 2,550 mm) * 4 pairs of fold-up approximately 10-tonne lashing rings * Arrangement: 1 pair at the front on the raised platform, inside the longitudinal beams * 1 pair at the very back in the excavator bucket recess, left and right * 1 pair at the front on the raised platform, in front of the curve, inside the longitudinal beams * 1 pair in the low bed at the rear, in front of the access ramp, in the bucket recess on the left and right. Towing device * Fixed drawbar with pivoting drawbar eye, approximately 40 + 50 mm, curved design, silent block mounting, drawbar retaining spring with tensioner * Truck coupling height from approximately 840 mm to approximately 1,030 mm PP004059B Drawbar length approximately 1,800 mm Support system * 2 automatic folding supports at the rear Axles * SAF air suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake approximately 300/200 mm, automatic brake linkage adjuster Wheels * 12 tires 235/75 R 17.5, 141J, manufacturer according to factory selection Braking system/Suspension * According to ECE regulation R13 * Dual-circuit compressed air braking system * Braking system manufacturer Wabco, EBS system 4S3M, 1st and 2nd axles monitored RSS/RSP * Stability program * Spring-loaded parking brake on 2nd and 3rd axles * Steel air tank * Brake/air connection lines with 2 single coupling heads, yellow/red EBS/ABS connection cable * Rubber band as a holder for EBS and electrical plugs * Air suspension with raising and lowering device (only on rear axles), automatic adjustment of the driving level from 15 km/h (RTR), with axle stop on the front axle Crsdpfx Aaez Ed Ausfji Floor * Softwood floor, approximately 50 mm thick, impregnated, protruding approximately 5 - 10 mm above the frame Steel tear plate cover over wheels Ramps * 2 foldable, one-piece, lightweight steel access ramps * Length approximately 2,800 mm, width approximately 750 mm, with hardwood floor approximately 35 mm, impregnated * Ramps can be shifted in width from an intermediate distance of approximately 350 mm to a maximum overall width of approximately 3,000 mm * Ramps can be locked in the driving position by chains with tensioners * Ramp lifting aid with coil spring * Ramps can be shifted manually from the side with a rod * Square ribs welded on the outside on the ramps and rear access ramp Painting * Steel granulate cleaning * Hot-dip galvanizing * Multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane * Topcoat chassis = RAL 3002 carmine red *

Condition: used, overall weight: 40,000 kg, first registration: 04/2009, Schwarzmüller G404 Unladen weight: 8,580 kg Gross weight: 40,000 kg Ramps: mechanical Leaf suspension Errors and omissions excepted! Codeyrdhhopfx Aaferi

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2014, loading space length: 8,600 mm, loading space width: 3,000 mm, loading space height: 900 mm, total length: 8,600 mm, total width: 2,500 mm, total height: 920 mm, suspension: steel, color: other, Equipment: ABS, = Additional options and accessories = - Central lubrication - Drum brakes - Front suspension: Leaf - Rear suspension: Leaf - Thick Axles = More information = General information Year of construction: 2014 Axle configuration Brakes: drum brakes Suspension: leaf suspension Middle axle: Max. axle load: 10000 kg Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Rear axle 3: Alloy wheels; Max. axle load: 10000 kg Weights Empty weight: 8.430 kg Carrying capacity: 31.570 kg GVW: 40.000 kg Functional Height of cargo floor: 90 cm Crsdpfxezp Uv Ao Aafsi Condition Technical condition: very good Visual appearance: very good

Condition: used, axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, Equipment: ABS, Schwarzmüller S1 Crodpfeqgal Ijx Aafoi DROP SIDES - SIDES!!! Operation 3/2022 Lift axle SAF axle Sliding roof Sliding sides flat Disc brakes ABS 385/65 R22.5 tires Condition: 1 axle 8 mm 2 axle 13 mm 3 axles 5 mm Loading height 2740 mm Pallet BOX Reserve Operating weight 6180 KG TOP CONDITION!!! More under: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCK CONSTRUCTION MACHINERY TRUCK SERVICE PNEUSERVICE TRUCK WASH CHECK OF THE TACHOGRAPH

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. Crodpez Ed Azefx Aafoi - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: used, empty load weight: 7,660 kg, maximum load weight: 33,840 kg, overall weight: 41,500 kg, axle configuration: 3 axles, first registration: 02/2001, loading space length: 12,800 mm, loading space width: 2,520 mm, loading space height: 920 mm, total length: 13,020 mm, total width: 2,550 mm, total height: 2,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, SAF axles, air suspension, 1st axle liftable, last axle self-steering, lifting+lowering, ABS (anti-lock braking system), lashing eyes, supports, twin tires, storage box Semi-mounted height 1350 mm, loading height 920 mm, loading length over axles approx. 8700 mm, loading length over pins approx. 4000 mm, offset height approx. 625 mm, device for rotating beacon, 800 mm drop sides can be folded down, 6 pairs of lashing brackets in the low bed outer frame, 6 x twist lock on the loading area, warning signs front and rear extendable to 3500 mm, semitrailer front dimension from bulkhead to kingpin 1750 mm, approx. 3,000 EUR invested in maintenance! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Csdpfx Aswcpcgjafori - .

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2010, Visit our website, where you can find our complete vehicle inventory with many more photos and information in several languages. SEL 8400 Schwarzmüller Y203 Lift axle / Aluminium rims German registration First registration: 10.12.2010 Year of manufacture: 2010 Gross vehicle weight rating (kg): 39,000 Permissible total weight (kg): 36,000 Empty weight (kg): 5,370 VIN: VAVY20339AH7542 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles BPW 1st axle liftable Air suspension Drum brakes Aluminium rims VEHICLE DOCUMENTS: Registration certificate part I (Schein) Registration certificate part II (Brief) M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO Crodsyxzllepfx Aafoi j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Despite all efforts to ensure the accuracy of the information, we cannot guarantee against errors or omissions. We kindly ask our customers to consult the available photos. The dimensions provided are approximate values. Our vehicles are sold in their current condition. We invite customers to visit our company to inspect the vehicle in person. Test drives are also possible. Please note: The vehicle will be delivered with the batteries currently installed. If you require new batteries, we can provide price information on request.

Condition: used, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,705 mm, Equipment: ABS, Schwarzmüller W103 Coil well Year of manufacture: 06/2011 MB axles Sliding tarp Sliding roof Well length: 7,500 mm Disc brakes ABS Tyres: 385/65 R22.5 Condition: 1st axle: 6 mm 2nd axle: 10 mm 3rd axle: 14 mm Loading height: 2,705 mm Pallet box Operating weight: 6,650 kg. More information: Cjdpfxew Eruqe Aafori FB: Dvorak Czechia IMPORT-EXPORT-SALES-PURCHASE-COMMISSION—SALE OF TRUCKS & CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH RECORDING

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – Distance from axle 1 to axle 2: 1410 mm Distance from axle 2 to axle 3: 4530 mm Distance from axle 3 to axle 4: 1410 mm Cedpfx Aoz Hy Ehoaferi = Further information = Year of manufacture: 2019 Suspension: Leaf spring suspension Front axle 1: Steerable Front axle 2: Steerable Unladen weight: 8,200 kg Payload: 31,800 kg GVW: 40,000 kg Reference number: 48 Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, axle configuration: 3 axles, first registration: 12/2019, next inspection (TÜV): 12/2026, Year of construction: 2019, Equipment: ABS, Schwarzmüller Megatrailer Coil BPW, with Lifting Roof Everything at a glance · First registration: December 16, 2019 · Year of manufacture: 2019 · Color: Blue · Tare weight: 7,200 kg · Tires: 435/50 R 19.5 · Note: Immediately available Special equipment · Coil well, 7.50 meters · Extendable Crsdpfj Aiaccsx Aafji · BPW axles · Lifting roof · 4 pairs of heavy-duty lashing hooks · 23 pairs of lashing eyes · Stake pockets · XL certificate · Wabco SmartBoard · Pallet stop bars (left + right) · Toolbox · 4 rows of aluminum slats · Spare tire holders with spare tire · 2x7 + 1x15 pole electrical connection · Jost support legs · Swivel bracket at the rear · Customs wire · ADR plate · A-plate · 2 fire extinguisher holders · Document box · TÜV (technical inspection) valid until 12/2026 Standard equipment · 3-axle · Disc brakes · ABS · EBS · Lifting and lowering valve · Reinforced front wall · Access ladder at the rear · 2 wedges · Edge protection bar · Underrun protection Errors, typing errors and prior sale are reserved. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are protected by the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution – even in part – is not permitted without express written consent. _____ Internal number for inquiries: TR26318 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. Probably yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact persons for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, maximum load weight: 26,500 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Equipment: ABS, Schwarzmüller SM LOWDECK 2 axles SAF axles Sliding roof Edscha Portal doors Disc brakes ABS Lifting roof on both sides Tyres 445/45 R19.5 Condition: 1st axle: 11 mm 2nd axle: 8 mm Spare Crsdoyy Tznjpfx Aafoi Loading height: 3,000 mm Two height positions Gross weight: 32,000 kg Payload: 26,500 kg.

Condition: used, axle configuration: 3 axles, first registration: 07/2017, Year of construction: 2017, Equipment: ABS, Schwarzmüller Coil Liner with BPW Through-Loading System Everything at a glance · First registration: 27.07.2017 · Year of manufacture: 2017 · Color: Blue · Tare weight: 6,950 kg · Tires: 385/55 R 22.5 · Note: Available immediately Special equipment · Coil liner, 7.5m · BPW axles · Through-loading system · 23 pairs of lashing eyes · 4 pairs of heavy-duty lashing hooks · Extendable · Stake pockets · WABCO SmartBoard · 2 toolboxes · Spare tire holder with spare tire · 2x7 + 1x15 pole electrical connection · Jost supports · Edscha sliding tarpaulin Csdpo Aiab Rofx Aafsri · 4 rows of aluminum slats · ADR plate · A-plate · Document holder · Customs rope · 2 fire extinguisher holders with fire extinguishers Standard equipment · 3-axle · Disc brakes · ABS · EBS · Lifting and lowering valve · Rear access ladder · 4 chocks · Underrun protection Subject to errors, typos, and prior sale. The seller reserves the right to withdraw from the sale. Copyright: All texts, images, and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Use, reproduction, or distribution – even in extracts – is not permitted without express written consent. _____ Internal number for inquiries: TR26319 _____ STARENT Truck & Trailer GmbH, Bruck 49, A - 4722 Peuerbach Sales contacts: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. We probably speak yours too. Contact us! Website: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as semi-trailer tractors, trailers, trucks and vans. Purchasing contacts: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, functionality: fully functional, empty load weight: 5,800 kg, maximum load weight: 28,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2014, next inspection (TÜV): 04/2027, loading space length: 13,620 mm, loading space width: 2,500 mm, total length: 13,840 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5, tire condition: 50 %, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2014, Equipment: ABS, Schwarzmüller construction material semi-trailer, side walls 1000 mm, 1st axle as a lift axle, spring accumulators on the 2nd and 3rd axles, air springs and brake pads on 2 axles are new, spare wheel holder, 2 toolboxes, available immediately. Crodpfj Ahfn Ajx Aafoi

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each Crjdpfx Ajz Shibsafsi * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: used, maximum load weight: 28,710 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 03/2007, Equipment: ABS, Schwarzmüller 3-axle tipper body, steel, air-suspended, lift axle, Mercedes axles, roll-over cover, platform. Codszbpq Tepfx Aafori