Low loader semitrailer

SCHWARZMÜLLER RH240 Jumbo Plateau Tieflader ausziehbar

Condition: new, overall weight: 36,700 kg, axle configuration: 3 axles, Equipment: ABS, Schwarzmüller RH240 Jumbo Flatbed Low Loader Semi-Trailer Extendable telescopic design – for building material and construction machinery transport - NEW - UNUSED - Gross vehicle weight rating: 36,000 kg Curb weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Itedeu A Nilepfx Agxef Platform width (lower deck) approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central-frame welded construction Extension length 6,000 mm Pneumatically lockable, operation on the trailer + additional position for 40ft container in the well Reinforced design for building material transport, rated for 20 t over 5 m at center of gravity and for construction equipment transport up to 20 t Frame is suitable for the transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for spot loads front and rear at support blocks Reinforced outer frame in the cranked platform 6 mm Reinforced outer frame in the well 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, as stake pocket cross member for 80x80 mm box stakes, as well as 1 pair of 5 t lashing rings on the outside integrated into the intermediate support Frame for 2-axle tractor units, coupling height unladen approx. 960 mm – 1,020 mm with air-suspended tractor 3 pairs front and 10 pairs rear, 10 t lashing rings, extendable at both sides on the outer frame, can also be folded outwards for oversize securing 10 pairs of lashing mushrooms with welded-in round steel on the underside of the outer frame Frame Attachments: 10 pairs of stake pockets with reinforcement for 80x80 mm box stakes, both sides on the outer frame 6 stake pocket cross members for 80x80 mm box stakes 24 steel box section stakes, 80x80x5 mm, effective height approx. 2,000 mm, with lashing holes at top for straps, hot-dip galvanized 3 pairs of container locks in the well platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for drive-on ramps at end of frame Landing Gear: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Self-steering SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse Last axle is trailing steering axle Brakes/Suspension: Brake system by Wabco Brake/air connectors with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with raise/lower function, total lift approx. 200 mm Automatic leveling to programmed ride height above 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes with ignition on Every 24 hours with ignition off Axle load indicator via EBS canbus signal for display in driver's cab (truck must be equipped accordingly) SmartBoard by Wabco for reading data via display (kilometres, axle aggregate load, brake diagnostics, etc.) Floor: 35 mm larch floorboards, impregnated on both sides, fitted longitudinally with small gaps, above the wheels with steel chequer plate covers Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts, integrated into the front wall, bolted on face side 2 lashing points each on the up

Condition: used, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 12/2022, loading space length: 12,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, 4-AXLE LOW-BED SEMI-TRAILER WITH CRANKED DECK Tractor Unit Data and Equipment: 3-axle tractor unit Please check the coupling height under the 'Dimensions' section! No modifications required to the tractor unit Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum free front clearance from center of fifth wheel 2,230 mm = maximum rear swing radius Tractor unit suspension: Air suspension Ijdpfxou Uzv Eo Agxetf Total permitted gross train weight: 40 t Technical gross weight: 58 t Technical axle assembly load: 40 t Technical fifth wheel load: 18 t Front cranked deck: 3,500 mm Flat loading area (low-bed deck): ca. 7,970 mm Rear access slope: ca. 730 mm Total width: ca. 2,550 mm (with extensions: ca. 3,000 mm) Loaded deck height: ca. 870 mm Unloaded deck height: ca. 900 mm Unloaded coupling height: ca. 1,250 mm When assembling a complete rig, compliance with legally permissible overall height and total train length must be ensured! Steel welded construction with front, sloped frame cranking and rear slope (no central crawler excavator trough) 5 pairs of locking pockets in low-bed for square tube stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings beneath the outer frame – between the axles 4 pairs of recessed 4t floor lashing rings on the cranked platform 7 pairs of recessed, retractable 5t floor lashing rings (10t technical tractive force) in low-bed + 1 pair foldable between 2nd and 3rd axle 1 pair of recessed, retractable 10t floor lashing rings on front crank slope Pair of recessed, fold-up 10t floor lashing rings on longitudinal beam inside, after the 2nd axle 1 pair of recessed, fold-up 10t floor lashing rings on longitudinal beam inside, after front crank Replaceable 2" kingpin 5 pairs of steel square tube stanchions 100x50x5 mm, usable height ca. 1,000 mm, hot-dip galvanized, stanchion locking with pressure mechanism # Permissible stanchion load 1,000 kg/stanchion, with load applied 500 mm above ground Both sides of the low-bed deck extendable with softwood planks 50 mm (the track width of machines to be transported must not exceed the outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation on the right, load compensation, manufacturer selected by factory 2 hydraulic rear supports, individually operated, controls in a separate stainless steel box AF air suspended low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic slack adjusters Axle spacings: 1,310 + 1,310 + 1,310 mm 3rd and 4th axles as stub-axle/low-friction steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, with additional switch in the cab and release valve on trailer Starting aid on 1st axle = speed-limited pressure release, relievable when loaded, operated by pushbutton in cab Mechanical odometer, installed on 2nd axle, right side in direction of travel 16 tyres 245/70 R 17.5, 146/146F (tyre load capacity 12t/axle) 16 steel rims 6.75 x 17.5, with offset, silver (tyre load capacity 12t/axle) 1 spare tyre 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity 12t/axle) 1 steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, 'LOCAL TRAC' performance package ... further details on request! Customs registration plates and insurance available for an additional charge upon