Low loader trailer

Schwarzmüller Tiefladeanhänger

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment available upon request. Frame * Steel welded construction with front frame curve and rear bevel * Access ramp with excavator bucket recess in the center = recess in the rear between the longitudinal beams * Approximately 2,300 mm long Integrated into the outer frame * 5 pairs of approximately 4-tonne lashing points (4 x in the low bed and 1 x on the raised platform) * 7 pairs of recessed, pull-out approximately 10-tonne lashing rings (4 x in the low bed, 1 x in the access ramp, and 2 x on the raised platform) * Standard ball-bearing swivel frame attachments * Extendable widening elements on both sides of the low bed platform with softwood boards, approximately 50 mm thick * (The track width of the construction machinery to be transported must not exceed the outer frame width of approximately 2,550 mm) * 4 pairs of fold-up approximately 10-tonne lashing rings * Arrangement: 1 pair at the front on the raised platform, inside the longitudinal beams * 1 pair at the very back in the excavator bucket recess, left and right * 1 pair at the front on the raised platform, in front of the curve, inside the longitudinal beams Hsdez Ed Aujpfx Ahksw * 1 pair in the low bed at the rear, in front of the access ramp, in the bucket recess on the left and right. Towing device * Fixed drawbar with pivoting drawbar eye, approximately 40 + 50 mm, curved design, silent block mounting, drawbar retaining spring with tensioner * Truck coupling height from approximately 840 mm to approximately 1,030 mm PP004059B Drawbar length approximately 1,800 mm Support system * 2 automatic folding supports at the rear Axles * SAF air suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake approximately 300/200 mm, automatic brake linkage adjuster Wheels * 12 tires 235/75 R 17.5, 141J, manufacturer according to factory selection Braking system/Suspension * According to ECE regulation R13 * Dual-circuit compressed air braking system * Braking system manufacturer Wabco, EBS system 4S3M, 1st and 2nd axles monitored RSS/RSP * Stability program * Spring-loaded parking brake on 2nd and 3rd axles * Steel air tank * Brake/air connection lines with 2 single coupling heads, yellow/red EBS/ABS connection cable * Rubber band as a holder for EBS and electrical plugs * Air suspension with raising and lowering device (only on rear axles), automatic adjustment of the driving level from 15 km/h (RTR), with axle stop on the front axle Floor * Softwood floor, approximately 50 mm thick, impregnated, protruding approximately 5 - 10 mm above the frame Steel tear plate cover over wheels Ramps * 2 foldable, one-piece, lightweight steel access ramps * Length approximately 2,800 mm, width approximately 750 mm, with hardwood floor approximately 35 mm, impregnated * Ramps can be shifted in width from an intermediate distance of approximately 350 mm to a maximum overall width of approximately 3,000 mm * Ramps can be locked in the driving position by chains with tensioners * Ramp lifting aid with coil spring * Ramps can be shifted manually from the side with a rod * Square ribs welded on the outside on the ramps and rear access ramp Painting * Steel granulate cleaning * Hot-dip galvanizing * Multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane * Topcoat chassis = RAL 3002 carmine red *

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: blue, Equipment: ABS, = Additional options and accessories = - Central lubrication Hodpfx Aozr H Rdehkew - Twin wheels = More information = General information Year of construction: 2007 Financial information Selling price: € 14.900, US$ 16.710 VAT/margin: VAT qualifying Other information Tyre tread remainder on axle 1: 60% Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: spring Tyre tread remainder on axle 2: 60% Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: spring Tyre tread remainder on axle 3: 60% Brake type on axle 3: drum Make of axle 3: BPW Suspension on axle 3: spring Tyre tread remainder on axle rear: 60% Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: spring Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Hodpfx Asz Ed Azshksw Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: used, maximum load weight: 10,080 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 08/2017, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2017, Equipment: ABS, Stock number 5820 Müller-Mitteltal 3-sided steel tandem tipping trailer / aluminum ramps / galvanized chassis / wide tires! ----* Manufacturer: Müller-Mitteltal * Type: KA-TA-R 13,5 * First registration: 08/2017 * Total weight: 13,500 kg * Unladen weight according to vehicle registration: 3,420 kg * Payload: 10,080 kg * Axles: 2 x Gigant / drum brakes * Suspension: leaf spring suspension * Tires: 385/55 R 19.5 approx. 50% on steel rims * EBS Hodpfx Ajzdm S Sehksw * Color: galvanized chassis, tipping body blue * Tipping body interior: approx. 6 m³ (5.00 m long x 2.42 m wide x 0.50 m high) * Extendable aluminum ramps * Towing hitch with 50 mm eye, height-adjustable * Tipping body with 4 pairs of foldable lashing eyes in the floor * Full-load support at the front * Additional supports at the rear (foldable) * Tool box at the front right * Quarter fenders * Load securing certificate * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension Hedpei Ri A Iefx Ahkow 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: used, maximum load weight: 7,370 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2017, loading space length: 5,150 mm, loading space width: 2,430 mm, loading space height: 500 mm, loading space volume: 6 m³, total length: 6,880 mm, total width: 2,550 mm, total height: 1,470 mm, Year of construction: 2017, Equipment: ABS, 2-Axle Wörmann Tandem Three-Sided Tipper Trailer Type: EURO 119.51/242 Chassis / Components: * 2 x Gigant axles with drum brakes * Leaf spring suspension * Tires: 235/75 R.22.5 * Remaining tread depth: front ~90/80%, rear ~90/80% * 1 x PVC storage box * Zandt Cargo drawbar, height-adjustable * Type: ZDZ 13 HKV 2-1700 * Eyelet 40 mm * Haacon front support * 2 x manual rear supports Body: * Three-sided tipper * Loading area: 5,150 mm x 2,430 mm x 500 mm * Approx. 6.5 m³ * Sideboards 500 mm * 8 x lashing eyes per side * Storage compartment under the loading platform at the rear Weights: * Gross vehicle weight: 10,500 kg * Payload: 7,370 kg * Unladen weight: 3,130 kg Other: * 1 previous owner * German vehicle * New main inspection / safety inspection available upon request ---- New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports Hsdpfez Hry Dsx Ahkew We will gladly assist you in organizing special transports. Day passes / export license plates We will gladly assist you in obtaining export/short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: new, empty load weight: 6,650 kg, maximum load weight: 17,350 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Unladen weight: 6650 kg, permissible total weight: 24000 kg, tire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - bogie with heavy duty ball-bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox with removable shelf, dimensions b620/h360/d440mm, lockable with padlock - extendable side extensions to 3000 mm (not in the rear incline) - storage compartment for wooden boards underneath the low-bed area - 70 mm wooden boards for extensions to 3000mm - 1 pair of ring lashing eyes recessed at the front on the gooseneck, each 5 t - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each 10 t - 1 x at the front on the gooseneck, 6 x in the low bed - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing eyes, each 10 t, 1x front on the gooseneck, 1x behind 3rd axle - drawbar with 40 mm towing eye, and 8-degree angled towing eye - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) - 235/75 R17.5 - steel rims in twin configuration, factory silver - 2-line compressed air brake system - spring-loaded parking brake ABS and ALB, with connector at the front, with connection cable - 24 Volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at the front, with connection cable - 1 LED rotating beacon with holder, switched via position light (removable beacon) - 2 pairs of warning boards, double, LED illuminated and extendable to 3000 mm - gooseneck front with steel/chequered plate covering - storage box recessed in the drive-over slope to the gooseneck - after that with 70 mm softwood floor, in the wheel well area steel / chequered plate covering - rear incline with 70 mm softwood flooring - low-bed area incl. rear incline 6,500 mm - steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wood covering - additional ramp securing Hedpfx Aoyxh Rzjhksw

Condition: used, empty load weight: 7,000 kg, maximum load weight: 23,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2021, loading space length: 8,100 mm, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading platform length approx. 8,100 mm, loading height approx. 890 mm, lashing rings, -- misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Hodpfxj Afcw Ro Ahkjw

Condition: used, maximum load weight: 23,760 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 08/2011, Equipment: ABS, HIEBENTAL / starting September 20, 2026 3-AXLE LOW-LOADER TRAILER Width extendable to 3000 mm New TÜV inspection certificate Partially new air springs Drawbar eye 400 mm ABS Spring ramps Completely hot-dip galvanized Hedpfx Aez Dlxhohkow 1 owner Air suspension Tires approximately 50% remaining German registration etc.

Condition: used, maximum load weight: 12,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2017, Year of construction: 2017, Equipment: ABS, Meiller MZDA 18/22B Tandem Three-Way Tipper, Hardox Hjdez Dzkgopfx Ahkjw Condition: Body with surface rust, frame clean, no rust, technically sound Tires: 80-90% ----Technical Specifications: General: ? Brief description: Meiller tandem trailer tipper, tandem tipping trailer, tipper, tandem, tandem tipper, three-way tipper ? Permissible total weight: 18,000 kg Cab: ? Refrigerator: No Engine: ? AdBlue: Yes Transmission: ? Retarder: No Chassis: ? Aluminum rims: No ? Lifting axle: No ? Steering axle: No Fifth wheel coupling: ? Disabled person's fifth wheel pin: No Documents: ? Unladen weight: 5,140 kg