Used Schwarzmüller Timber Semitrailers for sale (289)

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed trailer with Kennis type 16.000 roll crane and hydraulic outriggers — Manufacturer: Schwarzmüller — Model: Flatbed trailer with Kennis roll crane type 16.000 with hydraulic outriggers — First Registration: 02/2009 — Gross vehicle weight: 39,000 kg — Unladen weight (as per registration): 7,950 kg — Payload: 31,050 kg — Axles: 3 x Mercedes, 1st axle is a lift axle / 3rd axle is steered — Suspension: Air suspension with lifting/lowering function — Tyres: 385/65 R 22.5 approx. 50% tread remaining — Internal flatbed dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high — Colour: Chassis black, side walls yellow — EBS (Electronic Braking System) — Roll crane: Kennis type R-16/7.10, year 2009, with hydraulic outriggers — 3 hydraulic extensions — Max. outreach at 7.10m: 2,100 kg — Lifting capacity at 3.50m: 4,500 kg — 5th and 6th control circuit — Elevated seat with joystick controls — Hatz diesel engine with silent pack — Container locks for 20 ft or 40 ft containers — 5-piece aluminium side walls — Rear swing doors — Access ladder at rear left — Removable stanchions — Lashing rails on both sides for securing cargo — Wooden/steel floor — 2 toolboxes on left side — 1 toolbox on right side — Single mudguards — Full-load support legs — Reversing lights — Spare wheel bracket Bdedpogt Si Tofx Agbji — Pallet forks available at extra cost

Condition: used, maximum load weight: 33,980 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2013, Curb weight 5020 kg Full-tub with Hardox wear plate Aluminum frame Air suspension Lift axle Mercedes axles Front walkway Foldable underride guard Aluminum rims Bjdpfx Agjxnviuebsdi

Condition: used, maximum load weight: 18,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2005, loading space length: 8,545 mm, loading space width: 2,485 mm, loading space height: 560 mm, Equipment: ABS, LIFTING AXLE, SIDEWALLS. For more information please call: 420734511212 Bdedpfjxnu Atex Agbei

Condition: used, functionality: fully functional, empty load weight: 6,500 kg, maximum load weight: 17,500 kg, overall weight: 24,000 kg, color: silver, Year of construction: 2004, Equipment: ABS, Fully galvanized, hydraulic ramps Bdjdpfx Aewtqmbogboi

Condition: used, maximum load weight: 26,400 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, loading space length: 6,500 mm, loading space width: 2,300 mm, loading space height: 1,450 mm, loading space volume: 21 m³, Equipment: ABS, ? Short tipping semi-trailer body with bulk discharge ? Foldable underrun protection ? Drum brake ? Platform ? ABS ? Air suspension with lift axle Bdodpfx Agjw Ndlhsbsi ? EBS ? Roll tarp ? BPW axles All information provided without guarantee / Subject to prior sale.

Condition: used, empty load weight: 5,080 kg, maximum load weight: 18,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 11/2025, suspension: air, tire size: 265/70 R19,5, Equipment: ABS, Schwarzmüller N Series timber trailer | BPW axles | Air suspension | Tyres: 385/65 R22.5 | Good condition | 4 pairs of stakes | Approx. 6.60m loading area | Drum brakes | Subject to errors and prior sale. Bodpfxexfgy Se Agbodi

Condition: used, maximum load weight: 31,520 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2014, loading space length: 13,500 mm, loading space width: 2,490 mm, loading space height: 1,000 mm, Year of construction: 2014, Equipment: ABS, Contact person: René Friedrichsen: or - Felix Friedrichsen: or - Schwarzmüller flatbed with roller crane Kennis 30R / 2x steered axles ----* Manufacturer: Schwarzmüller * Type: J-series - roller crane * First registered: 10/2014 * Total weight: 39,000 kg * Empty weight according to vehicle registration document: 8,480 kg * Payload: 31,520 kg * Flatbed dimensions inside: approx. 13.50m long x 2.49m wide x 1.00m * Axles: 3x BPW axles / 1st axle liftable / 2nd + 3rd Axle pivot steering (Tridec)Tires: 385/55 R22.5 approx. 80% / disc brake * Suspension: air suspension with lifting and lowering * ABS * Rolling crane Kennis 30R/120-4 (built in 2014) with slewing ring! * Crane approx. 1,659 hours * Hatz diesel engine type 3L41L (built in 2014) * 4x hydraulic extensions * short arm at 6.00m = 6,000 kg * maximum extension at 12.20m = 2,270 kg * hydraulic supports * 5x side walls left * 6x stanchions left * 5x side walls right * 6x stanchions right * 1x rear side wall * Perforated rails on the flatbed left + right * Perforated rail on the flatbed in the middle * 2x stainless steel tool boxes left * Access ladder rear left + right * Work lights left + right Bdedpfx Agsxl Nthjbei * Additional reversing lights German vehicle!! German papers!!

Condition: used, maximum load weight: 27,950 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2014, next inspection (TÜV): 02/2026, Year of construction: 2014, Equipment: ABS, * Schwarzmüller J-Series flatbed * 1st owner, Austrian trailer * TÜV inspection valid until 02/2026 * Flatbed internal length: 13.60 m Bedpoxnhcasfx Agbodi * Flatbed internal width: 2.50 m * Flatbed internal height: 0.80 m * All information provided without guarantee * Subject to errors and prior sale

Condition: used, empty load weight: 6,180 kg, maximum load weight: 20,820 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space volume: 27 m³, total length: 8,970 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,940 mm, color: black, mileage: 1,000 km, gearing type: mechanical, fuel consumption (urban): 897 l/100km, lifting height: 3,200 mm, Equipment: ABS, Unladen weight: 6180 kg, permissible total weight: 27000 kg, tyre size: 385/65 R22.5, cargo volume: 27 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, lift axle, level control, electronic braking system (EBS), tarpaulin system, errors and changes excepted. New vehicle without registration. Bdsdpfx Agoxfmctobji

Condition: used, maximum load weight: 32,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2017, next inspection (TÜV): 06/2026, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,685 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 24 pallet boxes in the middle 8 pallet boxes at the rear Edscha sliding roof Fex Strap System Lift axle Customs rope 385/65R22.5 at least 50% tread Aluminium rims Bodpfx Aoxlvw Hsgbodi Very good condition Several available

Condition: used, maximum load weight: 15,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2017, loading space length: 7,450 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total width: 2,550 mm, total height: 1,260 mm, Year of construction: 2017, Equipment: ABS, WhatsApp SCHWARZMÜLLER 2-AXLE BDF TRAILER CHASSIS German vehicle 1st hand. Mileage original approx. 120,000 km !!!! Weights Total weight (permissible) 18 t Unladen weight approx. 2600 kg (+/- DIN tolerance) Product number / world manufacturer number 396346 = VAVSAZ218HD396346 Truck superstructure approx. 350 mm Truck coupling height unloaded approx. 830 mm Weights Total weight (permissible) 18 t Total weight (technical) 18 t Dimensions Overall width max. 2,550 mm Underride parking height 1,220 mm and 1,320 mm on level ground Loading height/top edge of frame unloaded - in driving position approx. 1,260 mm - lowered approx. 1,180 mm - raised approx. 1,400 mm Frame Welded steel frame construction Frame height at front approx. 100 mm 2 outriggers with container locks according to EN284 (20ft locking dimension) for: 1 x C715 swap body approx. flush with the rear or 1 x swap body C745 Standard bogie Low-maintenance ball race Front stop support, reversible, for body length C715 and C745 (for C715 with larger cab spacing) 4 guide rollers. Fit the rear pair approx. 1.46 m from the rear end of the frame, towards the center of the vehicle Extendable drawbar, 6 x 100 mm adjustable, with DIN drawbar eye 40 mm, Silent bushing bearing, mechanical Getofix fork lock (regardless of the legal legal total drawbar length and intermediate distance) Truck coupling height from 840 mm to 1,040 mm Towing length 1,800 - 2,400 mm SAF Intradisc B9 axles with disc brakes ø430 mm (22.5" disc), Bdjdovdlw Ropfx Agboi Load capacity 9 t/axle, on-road version 4 tires 385/65 R 22.5, 160J, make FULDA Ecotonn 4 Alcoa aluminum rims 11.75 x 22.5, offset 120 mm, DuraBright EVO Brake system in accordance with EC directives 71/320 and ECE R13 Dual-circuit air brake system Wabco brake system EBS system 4S3M, 1st + 2nd axle sensed RSS - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Quattromatic quick-release coupling EBS/ABS connection cable Air suspension with lifting and lowering device, total lift approx. 220 mm, Can be operated separately at the front and rear Automatic adjustment to programmed ride height from 15 km/h Quick exhaust valves on all axles Axle load indicator via EBS Canbus signal for display in the cab Lighting/electrics 24-volt lighting system in accordance with EC Directives 76/756/EEC 2 pcs. Partial LED five-chamber tail lights "Europoint III" 2 pcs. LED position lights at the front 2 pcs. LED clearance lights rear LED side marker lights 2 pcs. License plate lights Fixed connection cable with 1 x 15-pin plug 2 additional LED reversing lights Paintwork Steel granulate cleaning, 2-layer zinc phosphate primer, Spray painting with 2-component commercial vehicle acrylic paint Chassis, boom = RAL 7021 black-grey Powder-coated wheel hubs, black = powder-coated Side collision protection, black = powder-coated Drawbar/ drawbar tube = painted black (RAL 9005 deep black) Plastic parts black, unpainted Powder-coated attachment/installation parts black Hot-dip galvanized attachment/installation parts unpainted Reflective contour marking strip in white/red, in accordance with ECE 48 2 pairs of plastic single wheel mudguards with splash guard Aluminum underride guard, coated white 1 wheel chock, with bracket "Schwarzmüller" rubber apron with bar hinge 1 plastic toolbox 830x500x470 mm (WxHxD outside)

Condition: used, maximum load weight: 29,280 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, loading space length: 13,260 mm, loading space width: 2,480 mm, loading space height: 2,945 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, SCHWARZMÜLLER 3-Axle SANH Mega Curtainsider with Single-Piece Tail Lift for Forklift Transport First Registration 10/2024, New Vehicle Bdsdpfxoxcrq Dj Agboi Permitted Gross Vehicle Weight (technical): 39,000 kg Unladen Weight: 9,720 kg Internal Length: 13,600 mm Internal Width: 2,480 mm Internal Height: front 2,895 mm, rear 2,945 mm, height adjustable Fifth Wheel Height: 960 to 1,050 mm Chassis with frame reinforcements for point loads up to 20 t over 5 m Perforated outer frame 22 pairs of recessed lashing rings, 4 t 10 pairs of recessed lashing rings, 5 t 27 mm phenolic plywood floor + 12 mm cross-laid birch top floor, forklift axle load 7,200 kg, steel tear plate wear sheet at rear (5/7 mm) Reinforced aluminum front wall, 2,550 mm high, front wall interior protection with 9 mm phenolic plywood Tensioning rod at front corner posts with tension ratchet, tarpaulin can also be opened and tensioned from the front Rear portal extendable by 490 mm per side 3 pairs of reinforced centre posts, 5 rows of slat pockets 4 rows of 100 mm aluminum slats EDSCHA sliding roof with steel scissors, sliding both forwards and backwards Manual hydraulic lifting roof, height adjustable by 400 mm on both sides Sliding tarpaulin to Code XL INFLATABLE AIR HOSE SYSTEM in trailer roof DHOLLANDIA Tail Lift with 9,000 kg lifting capacity Full-height steel platform, 2,950 mm Platform loadable up to 14,000 kg!! Remote-control operation Hydraulic rear supports SAF axles, IntradiscPlus Integral disc brakes Axle spacing: 1,310 + 1,410 mm 1st axle: lift axle 3rd axle: steering axle 6-fold 435/50 R 19.5 Goodyear tyres WABCO Trailer EBS with RSS anti-skid protection Spring-actuated parking brake on 2 axles Air suspension with lift/lowering function, extra-long air bellows, total lift 250 mm Axle load display via CAN-Bus Tire pressure monitoring Full LED lighting 2 stainless steel tool boxes on the left, 1,000 x 500 x 500 mm RENTING is the new BUYING – available immediately with our FULL-SERVICE RENTAL!

Condition: used, empty load weight: 5,250 kg, maximum load weight: 8,000 kg, first registration: 08/2017, next inspection (TÜV): 03/2024, total length: 9,000 mm, total width: 25,500 mm, total height: 40,000 mm, suspension: air/air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 13,250 kg,

Condition: like new (used), machine/vehicle number: 412, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r 22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions Interior length approx. 5,100 mm Interior width approx. 2,420 mm Overall width max. 2,550 mm Unloaded loading height approx. 1,510 mm Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipper arms and rear tipper shaft; Plug lock for tipper body with crossover safety device Drawbar Cranked drawbar with height-adjustable heavy-duty bolted drawbar eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unloaded approx. 800 mm - max. 1,000 mm Support device At the front 1 mechanical support winch with crank on the left in the direction of travel, make of your choice, 1 piece access bracket screwed on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake slack adjusters Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 160K, make of your choice (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire Without spare rim(s) Without wheel nut protective caps Brake system/suspension Brake system in accordance with EC Directives 71/320 and ECE R13 Dual-circuit air brake system Knorr brake system EBS system 2S2M, 2nd axle sensed RSS/RSP - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Tipper bridge Welded steel construction Fixed sheet steel front wall 4 mm, approx. 980 mm high 2 steps on the inside and 1 on the outside of the front wall Fine-grain special steel floor plate 5 mm (Slight floor corrugation possible due to welding distortion) 5 pairs of swivel-up lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, can be folded down with extended swivel bolt locks and spring lifting aid, as well as additionally swingable Left and right side walls with manual central locking 2 rear corner posts at dropside height, fixed to the side 4 mm sheet steel rear wall (HB400), approx. 980 mm high, pivoting with recessed storage hooks for dosing chains on rear wall and underside of bridge Rear wall lock = automatic pneumatic lock 2 dosing chains for the pendulum rear wall Bjdslipccepfx Agbsdi With sealing strips Hydraulics 1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling Tipper press for 3-sided tipping, initial lifting force approx. 30 t; 1 safety rope Tarpaulin Plastic roller tarpaulin incl. aluminum tube with hand crank, side wall overhang approx. 400 mm to the side, without customs lock, horizontal tarpaulin bow rope tie-downs on the right in the direction of travel horizontal tarpaulin bow rope lacing, zig-zag lacing at the front and rear; Stop bracket and locking device for rolled-up tarpaulin on the right in the direction of travel; Holder for hand crank Tarpaulin fastening on the left in the direction of travel with 2 tensioning straps including rubber carpet pad

Condition: used, maximum load weight: 28,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2011, next inspection (TÜV): 04/2026, Year of construction: 2011, Equipment: ABS, * Schwarzmüller V-Series beverage box semi-trailer * TÜV inspection valid until 04/2026 * Box internal length: 13.50 m Bdodpexmqfbsfx Agbji * Box internal width: 2.45 m * Box internal height: 2.40 m * All information provided without guarantee * Subject to errors and prior sale

Condition: used, maximum load weight: 32,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2017, next inspection (TÜV): 06/2026, loading space length: 1,360 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, Tyres 385/65R22.5 with at least 50% tread 8 pallet boxes at the rear 24 pallet boxes in the middle Flex Strap System Edscha lift axle, alloy wheels Bdedpfxexll D Ao Agbji Very good condition Multiple units available!

Condition: used, empty load weight: 5,740 kg, maximum load weight: 32,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Schwarzmüller timber semi-trailer 3-axle | SAF axles with disc brakes | Unladen weight: 5,740 kg | Payload: 32,260 kg | Lift axle | 8 pairs of stakes | Tyres: 385/65 R22.5 | Valid inspection certificate until 01/2026 | Subject to errors, input mistakes, and prior sale. Bdsdpfxjxdn Hdj Agbsi

Condition: new, overall weight: 36,700 kg, axle configuration: 3 axles, Equipment: ABS, Schwarzmüller RH240 Jumbo Flatbed Low Loader Semi-Trailer Extendable telescopic design – for building material and construction machinery transport - NEW - UNUSED - Gross vehicle weight rating: 36,000 kg Curb weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width (lower deck) approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central-frame welded construction Extension length 6,000 mm Pneumatically lockable, operation on the trailer + additional position for 40ft container in the well Bedpfsu A Nilox Agbjdi Reinforced design for building material transport, rated for 20 t over 5 m at center of gravity and for construction equipment transport up to 20 t Frame is suitable for the transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for spot loads front and rear at support blocks Reinforced outer frame in the cranked platform 6 mm Reinforced outer frame in the well 6 mm Tapered cross members Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, as stake pocket cross member for 80x80 mm box stakes, as well as 1 pair of 5 t lashing rings on the outside integrated into the intermediate support Frame for 2-axle tractor units, coupling height unladen approx. 960 mm – 1,020 mm with air-suspended tractor 3 pairs front and 10 pairs rear, 10 t lashing rings, extendable at both sides on the outer frame, can also be folded outwards for oversize securing 10 pairs of lashing mushrooms with welded-in round steel on the underside of the outer frame Frame Attachments: 10 pairs of stake pockets with reinforcement for 80x80 mm box stakes, both sides on the outer frame 6 stake pocket cross members for 80x80 mm box stakes 24 steel box section stakes, 80x80x5 mm, effective height approx. 2,000 mm, with lashing holes at top for straps, hot-dip galvanized 3 pairs of container locks in the well platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for drive-on ramps at end of frame Landing Gear: Mechanical steel landing gears, 2 x 12 t 2 drop-down supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Self-steering SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse Last axle is trailing steering axle Brakes/Suspension: Brake system by Wabco Brake/air connectors with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with raise/lower function, total lift approx. 200 mm Automatic leveling to programmed ride height above 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes with ignition on Every 24 hours with ignition off Axle load indicator via EBS canbus signal for display in driver's cab (truck must be equipped accordingly) SmartBoard by Wabco for reading data via display (kilometres, axle aggregate load, brake diagnostics, etc.) Floor: 35 mm larch floorboards, impregnated on both sides, fitted longitudinally with small gaps, above the wheels with steel chequer plate covers Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts, integrated into the front wall, bolted on face side 2 lashing points each on the up

Condition: used, maximum load weight: 26,780 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/2015, loading space volume: 92 m³, Year of construction: 2015, Equipment: ABS, warzmüller J-SERIE, 2015 Reifengröße -385/65 R 22,5 in sehr gutem Zustand. Total weight - 34000 kg. Eigengewicht - 7220 kg. Netzlast - 26780 kg. Bdodpfx Asxpqaqjgbei

Condition: like new (used), machine/vehicle number: 174, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions Interior length approx. 5,100 mm Interior width approx. 2,420 mm Overall width max. 2,550 mm Unloaded loading height approx. 1,510 mm Frame Central-axle welded steel frame construction in weight-optimized lightweight design With tipper booms and rear tipper shaft Plug lock for tipper body with crossover safety device Drawbar Cranked drawbar with height-adjustable heavy-duty bolted drawbar eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unloaded approx. 800 mm - max. 1,000 mm Support device Front 1 mechanical support winch with crank on the left 1 piece access bracket screwed on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake slack adjusters Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 160K, make of your choice (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire Without spare rim Without wheel nut protective caps Brake system/suspension Brake system in accordance with EC Directives 71/320 and ECE R13 Dual-circuit air brake system Knorr brake system EBS system 2S2M, 2nd axle sensed RSS/RSP - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems SWIT - Schwarzmüller Intelligent Telematics, "BASIC" service package Data transmission via GPRS Tipper bridge Welded steel construction Bridge length 5,100 mm Bjdpfx Aop T Ullegbedi Fixed sheet steel front wall 4 mm, approx. 980 mm high 2 steps on the inside and 1 on the outside of the front wall Fine-grain special steel floor plate 5 mm (Slight floor corrugation possible due to welding distortion) 5 pairs of swing-up lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, can be folded down with extended swivel bolt locks and spring lifting aid, as well as additional swinging side walls left and right with manual central locking 2 rear corner posts at dropside height, fixed to the side Sheet steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed bearing hooks for dosing chains on rear wall and underside of bridge Rear wall lock = automatic pneumatic lock 2 dosing chains for the pendulum rear wall With sealing strips Hydraulics 1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling Tipper press for 3-sided tipping, initial lifting force approx. 30 t; 1 safety rope Tarpaulin Plastic roller tarpaulin incl. aluminum tube with hand crank, side wall overhang approx. 400 mm at the side, without customs lock, horizontal tarpaulin bow rope tie-downs on the right in the direction of travel horizontal tarpaulin bow rope lacing, zig-zag lacing at the front and rear; Stop bracket and arret

Condition: used, maximum load weight: 14,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2010, Equipment: ABS, Vehicle Identification Number: VAVT802189H291388 Unladen weight: 3,620 kg Currently downgraded to 13,000 kg, technically possible 18,000 kg German roadworthiness inspection due - safety inspection 09.2025 BPW Eco axles with disc brakes Dimensions: 5,600 x 2,480 x 900 mm Drawbar with 40 mm eye (replaceable) 2 x toolbox Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Bdedpfxjwmh Rde Agbsi Changes, intermediate sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general delivery and payment conditions apply.

Condition: used, maximum load weight: 25,660 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2022, Year of construction: 2022, Equipment: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low-loader Extendable and telescopic – for building materials and construction machine transport – Like new condition – Gross vehicle weight (GVW): 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length: approx. 3,950 mm Rear platform length: approx. 9,620 mm Platform width at lower deck: approx. 2,540 mm Loading height in low-bed (unladen): approx. 830 mm Frame: Extendable central frame welded construction Extension length: 6,000 mm Pneumatically lockable, operated on the trailer, additional position for 40ft container in low-bed Reinforced version for building materials transport, designed for 20 t over 5 m at centre and for construction machinery transport up to 20 t Frame suitable for transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point load at front and rear with support brackets Reinforced outer frame in gooseneck deck 6 mm Reinforced outer frame in low-bed 6 mm Tapered cross members Adjustable intermediate platform approx. 300 mm (not removable), mechanically lockable; designed as stanchion pocket cross member for 80x80 mm square stanchions; includes 1 pair of 5 t lashing rings on outer intermediate platform Frame for 2-axle tractor unit and coupling height unladen approx. 960 mm - 1,020 mm (for air-suspended tractor) Front: 3 pairs, rear: 10 pairs of 10 t lashing rings retractable in outer frame, both sides, foldable outward for overwidth securing 10 pairs of lashing mushrooms with welded round steel at the bottom of the outer frame Frame accessories: 10 pairs of plug-in sockets with reinforcement for 80x80 mm square stanchions, on both sides of the outer frame 6 stanchion pocket cross members for 80x80 mm square stanchions 24 steel square stanchion posts 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes at top for strapping, hot-dip galvanized 3 pairs of container locks in low-bed deck, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container (when extended) U-profile rail for loading ramps at end of frame Support equipment: Bdsdpsu A Nhnjfx Agbsi Mechanical steel landing gear, 2 x 12 t 2 drop supports, both sides at rear of frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low-loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lockout activated automatically in reverse gear Last axle: trailing steered Brakes/Suspension: Wabco brake system Brake/air connections with 2 single coupler heads yellow/red, EBS/ABS socket at front Air suspension with lift and lower function, total stroke approx. 200 mm Automatic adjustment to programmed driving level from 15 km/h Assistance/Safety systems: Standard reporting interval: every 15 minutes with ignition on every 24 hours with ignition off Axle load display via EBS CAN bus signal for display in driver cab (truck must be suitably equipped) Wabco SmartBoard for reading data via display (mileage, axle aggregate load, brake diagnostics, etc.) Floor: 35 mm larch wooden floor, impregnated on both sides, longitudinally laid with small gaps, over wheels with steel tread plate cover Front wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts integrated into front wall, bolted at the end face 2 lashing rings at the top of each front corner post At goose

Condition: like new (used), machine/vehicle number: 119, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions Interior length approx. 5,100 mm Interior width approx. 2,420 mm Overall width max. 2,550 mm Unloaded loading height approx. 1,510 mm Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipper booms and rear tipper shaft; Plug lock for tipper body with crossover safety device Drawbar Cranked drawbar with height-adjustable heavy-duty 50 mm bolt-on drawbar eye (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unloaded approx. 800 mm - max. 1,000 mm Support device At the front 1 mechanical support winch with crank on the left in the direction of travel, make of your choice, 1 piece access bracket screwed on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels Bdsdsinxcqepfx Agbei 4 tires 385/65 R 22.5, 160K, make of your choice (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire Without spare rim(s) Brake system/suspension Brake system in accordance with EC Directives 71/320 and ECE R13 Dual-circuit air brake system Brake system make Knorr EBS system 2S2M, 2nd axle sensed RSS - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems Axle load indicator via EBS Canbus signal for display in the cab (truck must be prepared accordingly, no calibrated scales) Tipper bridge Welded steel construction Fixed sheet steel front wall 4 mm, approx. 980 mm high 2 steps on the inside and 1 on the outside of the front wall Fine-grain special steel floor plate 5 mm (Slight floor corrugation possible due to welding distortion) 5 pairs of swivel-up lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, can be folded down with extended swivel bolt locks and spring lifting aid, as well as additionally swingable Left and right side walls with manual central locking 2 rear corner posts at dropside height, fixed to the side 4 mm sheet steel rear wall (HB400), approx. 980 mm high, pivoting with recessed storage hooks for dosing chains (on rear wall and underside of bridge) Rear wall lock = automatic pneumatic lock 2 dosing chains for the pendulum rear wall With sealing strips Hydraulic system 1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling Tipper press for 3-sided tipping, initial lifting force approx. 30 t; 1 safety rope Tarpaulin Plastic roller tarpaulin incl. aluminum tube with hand crank, side wall overhang approx. 400 mm at the side, without customs lock, horizontal tarpaulin bow rope tie-downs on the right in the direction of travel horizontal tarpaulin bow rope lacing, zig-zag lacing at the front and rear; Stop bracket and locking device for rolled-up tarpaulin on the right in the direction of travel; Holder for hand crank Tarpaulin fastening on the left in the direction of travel with 2 tensioning straps including rubber pads and turnbuckles on the underside of the bridge Tarpaulin color similar to RAL 9006 white aluminum Lighting/el

Condition: used, maximum load weight: 32,750 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, Equipment: ABS, Vehicle Identification No.: VAVKSK339HZ399922 SUITABLE FOR ALL-WHEEL DRIVE - Fifth wheel height approx. 1,330 mm Automatic roof - Marcolin with radio remote control All-wheel drive German HU 10.2025 - SP due Terrain weight: 6,250 kg Trough dimensions: 7,600 x 2,330 x 1,650 mm Volume: approx. 28 m³ BPW Eco Plus axles with drum brakes Lift axle Wabco Smart Control Drop support legs External swing tailgate Bdodpfjw A D Ikex Agbsi Adjustable underride guard Tires: 385/65 R 22.5 Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under the terms of the sales contract. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: like new (used), machine/vehicle number: 122, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r 22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions Interior length approx. 5,100 mm Interior width approx. 2,420 mm Overall width max. 2,550 mm Unloaded loading height approx. 1,510 mm Bdodpfjk Ttc Sox Agbei Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipper booms and rear tipper shaft; Plug lock for tipper body with crossover safety device Drawbar Cranked drawbar with height-adjustable heavy-duty 50 mm bolt-on drawbar eye (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unloaded approx. 800 mm - max. 1,000 mm Support device At the front 1 mechanical support winch with crank on the left in the direction of travel, make of your choice, 1 piece access bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 160K, make of your choice (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire(s) and spare rim(s) Brake system/suspension Brake system in accordance with EC Directives 71/320 and ECE R13 Dual-circuit air brake system Brake system make Knorr EBS system 2S2M, 2nd axle sensed RSS - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems Axle load indicator via EBS Canbus signal for display in the cab Tipper bridge Welded steel construction Fixed sheet steel front wall 4 mm, approx. 980 mm high 2 access steps on the inside and 1 on the outside of the front wall Fine-grain special steel floor plate 5 mm (Slight floor corrugation possible due to welding distortion) 5 pairs of swing-up lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, can be folded down with extended swivel bolt locks and spring lifting aid, as well as additionally swingable Left and right side walls with manual central locking 2 rear corner posts at dropside height, fixed to the side Sheet steel rear wall 4 mm (HB400), approx. 980 mm high, pivoting with recessed storage hooks for dosing chains (on rear wall and underside of bridge) Rear wall lock = automatic pneumatic lock 2 dosing chains for the pendulum rear wall With sealing strips Hydraulic system 1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling Tipper press for 3-sided tipping, initial lifting force approx. 30 t; 1 safety rope Tarpaulin Plastic roller tarpaulin incl. aluminum tube with hand crank, side wall overhang approx. 400 mm to the side, without customs lock, horizontal tarpaulin bow rope tie-downs on the right in the direction of travel horizontal tarpaulin bow rope lacing, zig-zag lacing at the front and rear; Stop bracket and locking device for rolled-up tarpaulin on the right in the direction of travel; Holder for hand crank Tarpaulin fastening on the left in the direction of travel with 2 tensioning straps including rubber pads and turnbuckles on the bridge