Used Stas Open Flatbed Semitrailers for sale (117)

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Dcedpfx Asuar Amoa Rob Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2025, Equipment: ABS, Buy, rent, or lease with an option to purchase! Approx. 60m³ STAS agricultural moving floor with integrated grain hopper / service door / slider for sample collection, etc. ----* Manufacturer: STAS * Type: FARMSTAR - Agricultural Moving Floor * First registered: - (New vehicle) * Color: Chassis + body RAL 7016 anthracite gray, roll-up tarpaulin SIO 7340 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift axle + traction aid / disc brake * Tires: 385/65 R22.5 with Speedline Diamond aluminum rims * Wheelbase: 6.25m * Suspension: Air suspension with lifting and lowering * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control console at the rear right * 21 floorboard system, 6mm ribbed * Welded aluminum end caps * Aluminum rear end plate * Integrated grain hopper * Additional guides below the floor profiles * Complete emptying wall with brushes and stainless steel handles * Front wall made of aluminum plank profiles * Service door in the front wall * Smooth side walls inside and out (grain version), welded through * Viewing window on the rear left side wall * Wing doors (50/50) * 4 locking rods * 2 slides for sampling (left and right) * Pivoting door cross member * Front hydraulic connections with 3 m hoses and * Connection option below the body without hoses * 1" female pressure * 1" female return port * Operator platform with access at the front left and right * Saddle height 1,150mm * Single fenders * Full-load supports * Roll-up tarpaulin (900g/m²) with quick-click system * Aluminum bow, foldable * Aluminum rear light guard (foldable) * Aluminum air tank * 1x toolbox, front left * 1x toolbox, rear right * Shovel and broom holder, left * 1x aluminum step ladder, 2x 8-step, attached to the right * 1x extendable ladder at the rear right * Smartboard * TPMS tire pressure monitoring * 5-chamber LED taillights * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light on the inside of the bulkhead * 2 x 3 functional lights at the top of the door cross member Buy, rent, or rent with purchase option upon request! Note on possible errors in the advertisement: Despite careful preparation of this advertisement, isolated errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions. Dcsdpfowknz Rex Aa Rjb

Condition: new, empty load weight: 6,550 kg, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,613 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, wheelbase: 6,250 mm, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Axle manufacturer Jost, aluminum chassis, color grey, air-lift suspension, raising and lowering, lift axle 1st + 3rd axle, disc brake, fixed side underrun protection, toolbox, 2x LED reversing lights, 4 x LED side reversing lights (2x at the support winch + 2x behind the axle unit), 1 x LED light in the cargo area, broom and shovel holder on the left-hand side underrun protection in direction of travel, cargo floor control type CF 500 SL-C - E"-CONTROL 6 mm with additional plastic guides below the floor profiles, wing doors (1/2 - 1/2 with door end crossmember, remote control, rear door impact protection - aluminum impact buffer across the entire width of the rear wall, frame and tarpaulin, maintenance flap front left, work platform with access, roller tarpaulin (PVC tarpaulin Panama quality 900g/m²), load securing certificate DIN EN 12642 Code XL, production 5/2025, grain hopper / sluice with central outlet at rear and dust bag, immediately available" Dcedpfxoxac Dpe Aa Rob

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2008, Year of construction: 2008, Equipment: ABS, Stas S 339 CX Year of manufacture: 2008, air suspension, 3 axles, tarpaulin, 2 support legs, round tipper body, internal number: 25A036 Dcsdpfxsxnfxfe Aa Reb

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 11/2025, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, STAS Biostar moving floor trailer, approx. 92 cbm, equipped with a "Cargo-Floor" moving floor with 21 planks, 10 mm thick, designed for complete emptying (sliding front wall), push-pull function, radio remote control for the moving floor, double-leaf rear doors with rotary locking bars, front access ladder and standing platform on the body, rolling tarpaulin with central locking, side protection tarp, air connection located behind the axles, ABS, EBS, ALCOA Durabright aluminum wheels, SAF Intradisc+ axle(s), first axle liftable, rear steering axle, disc brake system, Wabco Smartboard, air suspension with lift/lowering function, landing gear, stainless steel storage box. Vehicle may be wrapped or labeled with advertising. Our offer does not generally include a new TÜV inspection. Should you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops. Vehicle may be wrapped or labeled with advertising. Our general terms and conditions of delivery and payment apply. Dsdpfxew Nunge Aa Rjcb We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Dcsdpfx Aaoxf Spfj Rjb Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. Dcjdpexplxzsfx Aa Rob STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: new, maximum load weight: 28,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Available for purchase, rental, or hire purchase by arrangement! STAS 91m³ Walking Floor Trailer / 10mm ribbed floor ---- * Manufacturer: Stas * Model: BIOSTAR - Walking Floor * First registration: - (new vehicle) * Color: Superstructure black RAL 9005, Chassis black RAL 9005, Tarpaulin black * Volume: approx. 91m³ (13.5m long x 2.47m wide x 2.82m high) * Gross weight: 36,000 kg * Unladen weight (manufacturer data): 7,690 kg * Payload: 28,460 kg * Axles: 3x JOST axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R22.5 on Speedline Diamond aluminium rims * Suspension: Air suspension with lift and lower function * EBS * Cargo Floor CF500SL-C floor with radio remote control Dedpfx Aowi D S Aja Rocb * 10 mm ribbed floor * Moving bulkhead * Connection port on front wall (additional connection option on landing legs) * Operator platform with front left access * Swing doors (50/50) with pneumatic locking * Extendable ladder on the right * Roll-up tarpaulin with tension belts * 3x cross beams * Toolbox rear right * Aluminium drop legs * Aluminium ladder approx. 3.80 m * Aluminium rear underrun protection * Shovel and brush holder on the left * Smartboard rear left * One-piece mudguard for rear lights * 2x LED work lights (1x left & 1x right) * 2x LED reversing lights, rear left and right New vehicle - Available immediately! For purchase, rental, or hire purchase by arrangement! Note regarding possible errors in the advertisement: Despite careful preparation, errors may have occurred in the text or specifications. We assume no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to confirm details or to clarify any further questions.

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Year of construction: 2013, Tyre size: 385/65R22,5 Dcjdpfx Aewzkx Tsa Rsb Suspension: air suspension Drive: Wheel Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: excellent (used), axle configuration: 2 axles, first registration: 01/2001, suspension: steel, color: beige, Year of construction: 2001, Axle brand: ROR Suspension: Leaf spring Curb weight: 4,620 kg Dcodpfx Aaswl Rcmo Reb Payload: 28,380 kg GVW: 33,000 kg Tipper: Rear Technical condition: Very good Visual condition: Very good Contact Thierry Leemans for further information.

Condition: used, overall weight: 39,000 kg, first registration: 01/2013, next inspection (TÜV): 07/2025, Equipment: ABS, Volume tipper 59 cubic meters Full aluminum Empty weight 7570 kg SAF axles with disc brakes Tires 60% Dcodpfxovwhvpe Aa Reb Good condition Belgian registration Price 23,900 euros net

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Dodpfxsxf Sn Is Aa Recb Offer and images subject to confirmation.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,250 mm, Equipment: ABS, bioSTAR 90.6 cbm Deep Black EU conformity Chassis type: moving floor National kingpin load (t): 12 National axle load (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Chassis series: 135 Design-based technical max. gross weight (t): 39 Wheelbase (moving floor semi-trailer, mm): 7850 Internal height front (mm) (IHF): 2641 Internal height rear (mm) (IHB): 2778 Loading length (mm): 13513 Volume (m³): 90.6 Total width (mm): 2550 Total length (mm): 14000 Chassis Chassis material: steel Tyre size: 385/65R22.5 Chassis neck height (mm): 217 Axles: JOST Brake version: disc brake Brake type: JOST - DCA-T7 Offset (ET): 120 1st axle with lift axle and starting aid (option) 3rd axle with lift axle (option) Tyre pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lowering valve Lowering of air suspension via Smartboard, as well as lift/lowering valve Wheels: Alcoa Dura Bright Landing legs: steel gear-type landing legs mounted at the front of the chassis, JOST MODUL type, single-side operation, 2 speed levels Control console: EBS operation on the left in driving direction, behind the axles Lighting manufacturer: Aspöck Lighting type: LED version (2 x 2 round) Hydraulic coupling: rotary coupling Smartboard Air connection mounted in the toolbox Aluminium access ladder 3.80 m - right-hand side in driving direction Loading pressure gauge Ø 63 mm - mounted on the side of the control panel Moving floor system brand: Cargo Floor Air and electrical console mounted centrally in driving direction with gantry Lighting protection: one-piece protective fender Superstructure Front wall inclination (°): 90 Rear wall inclination (°): 90 Dcsdpfxoxhanzj Aa Reb Rear door type: wing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Standard fifth wheel plate (15T) Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Operation of floor system: radio remote control Cargofloor control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 10 mm flat Moving floor closure plate: stainless steel Oil temperature sensor for moving floor system Residue emptying wall Type of residue emptying wall: aluminium Residue emptying wall: brush Residue emptying wall storage: 6 wheels with bidirectional cleaning (cargo floor) Rear wall: aluminium Design of wing door division: 1/2 to 1/2, with door end crossbar Opening of door wings: right-hand door wing opens first (manufacturer choice: STAS) End crossbar of doors: swing type Material end crossbar: aluminium Rear door locking: 1x rotary bar per door leaf Number of door handles - left door leaf: 2 per rotary bar Number of door handles - right door leaf: 1 per rotary bar Securing open door wings: spring holder with plastic protection Rear wall sealing: standard rubber seal Additional lock rear wall: single-acting pneumatic Operation of additional lock: manual via operator control on the side of the control panel Impact protection rear doors: aluminium ram buffer across the entire width of the rear wall Spriegel type: flat round aluminium tube Number and position of spriegels: 3 central spriegels (evenly distributed, centre) and 1 rear spriegel (rear) Curtain holders: multifunctional (rotatable and foldable) 4 pcs Curtain holder positions: right side wall Distance from lower corner profile to upper side wall: au (incomplete)

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5628 New vehicle in stock – available immediately! Purchase, lease, or rent with a purchase option available upon request! Stas 91 m³ Moving Floor / 10 mm Ribbed Floor / TÜV Load Certificate / Front Service Door / Galvanized Chassis ---- * Manufacturer: Stas * Model: Biostar – moving floor trailer * Year of manufacture: 2025 * Technical gross weight: 42,000 kg * Unladen weight (manufacturer stated): 7,800 kg * Payload: 34,200 kg * Suspension: Air suspension with raise/lower function ECAS * Axles: 3x Jost, with first axle as lift axle and traction assist / disc brakes * Tires: 385/65 R22.5 on Speedline Diamond alloy wheels * EBS * Color: Body white RAL 9010 / Tarp black SIO7999 * Volume: approx. 91 m³ (13.50 m long x 2.47 m wide x 2.82 m high) * Double-wing rear doors with pneumatic locking * Extendable step ladder on right side * Traction assist lift axle operated via truck button Dcjdpfxoxhbcgj Aa Rob * Smartboard * Telescopic landing gears * PVC toolbox 830x500x470 mm * 2 LED reversing lights at the rear left and right * 2 LED reversing lights at rear supports * 1 interior LED front wall light * Ecoled 2 LED rear lights * Cargo Floor, 10 mm ribbed floor CF500SL-C -E Control * Radio remote control * Moving side wall * Roll tarp with lashing straps Panama 900 g/m² * Side guard curtain * Tarp retainers * Front service door NEW VEHICLE!! Purchase, lease, or rental with an option to buy available upon request! Note regarding possible errors in the listing: Despite careful preparation of this advertisement, mistakes or errors in the descriptions or details may occur. We do not accept liability for mistakes, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any further questions.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 13,435 mm, loading space width: 2,480 mm, loading space height: 2,690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard * Storage box Dcodpfsv Hlwiex Aa Rjb * ALU rims * Tarpaulin -----Internal vehicle number: 10290----Subject to errors and prior sale.

Condition: used, empty load weight: 6,340 kg, overall weight: 39,000 kg, Year of construction: 2002, Equipment: ABS, STAS SA339K/ALU Year built: 2002 Axles 3 ABS Air Total weight: 39000 kg Empty weight: 6340 kg Dsdovdru Aspfx Aa Rscb

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALUMINIUM construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINIUM, 140 mm frame height! (max. 39t) Axles and Suspension “Disc Brakes 22.5” Dodpofakkcefx Aa Rscb Jost axle assemblies 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axles separately liftable with start-up aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tyres and Wheels 6 wheels with tyres 385/65 R 22.5 as per manufacturer selection, Alcoa aluminium rims DuraBright - 11.75x22.5 ET 120, kingpin bolted into a 10 mm thick plate Landing Gear Aluminium drop-leg landing gears, 2 x 10 t support load, for air suspension we use swivel feet Brake System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with control at rear, aluminium air tank system, premium modulator Electrical System According to STVZO regulations with 2 LED five-chamber tail lights type Aspöck Europoint LED integrated in aluminium rear closure, 24 volt system with 1x 5-pin and 2x 7-pin sockets, side marker lamps in LED, 2 separate LED work lights at rear, 2 LED work lights at first landing gear height, 1 LED work light inside front left, operable from outside Body/Tipper Body "Body fully welded on the inside" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN. Aluminium body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on inside, floor as moving floor system laid on 140 mm ALU cross beams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in beveled version, flat rear wall in straight design with 2 ALU swing doors 50/30 mm, with 4 locking bars in welded ALU rear frame mounted in Teflon and stainless steel bearings, continuous reinforced ALU upper flange supporting ALU wall with "Kevlar tarpaulin for complete emptying, side brush seal, additional side Kevlar tarpaulin, integrated discharge chute with folding cover plate at rear left bottom, operable from outside, inspection window rear left, one sampling flap in each rear door (2 pcs.), service door front left Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles mounted on ALU square profiles with approx. 670 PE-HD sliding plates, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed parts at front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with sizes and type to be specified, operating pressure 190 to max. 240 bar, ALU end pieces welded into floor, electric control rear left with cable control in a lockable waterproof box, Accessories PVC mudguards with rubber mud flaps, ALU spare wheel carrier, side ALU underrun protection in folding version, 1 tool box approx. 800x460x430 mm in plastic, approx. 3.7 m ALU ladder, rolling tarpaulin 680 g/m² quality with rolling tarpaulin system incl. sides.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2019, * Lift axle Djdpfxow Rit Te Aa Rocb * ALU rims * JOST axles * Sliding tarp * Unladen weight: 7,760 kg -----Internal vehicle number: 10296----Errors and interim sale reserved

Condition: used, empty load weight: 5,635 kg, overall weight: 36,000 kg, Year of construction: 2015, Equipment: ABS, STAS/ ALU/ PLANE Year of construction: 2015 2 Axles Dsdpfx Aovdrtlja Rocb Empty weight: 5635 kg Total weight: 36000 kg ABS EBS

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Dedpfxsgcw Rms Aa Recb Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Dsdpfjfi Nmuox Aa Rscb Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ Transfer costs *Pictures and offers are subject to change* Djdpju Dvw Eofx Aa Rjcb

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Dcsdpfx Aasfi Nmpe Rsb Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Seat post mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Dcodpegcw Risfx Aa Rjb Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking Djdpju Dvw Sjfx Aa Recb FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*