Used Unsinn Low Loader for sale (12,115)

Condition: used, color: red, Year of construction: 2021, Faymonville Maxtrailer F-S43-1AAF. Year: 2021. 10.5 tons BPW axles. Weight: 9446 kg. Max weight: 49,500 kg. Kingpin load: 18,000 kg. Air suspension. Toolbox on neck. 3th axle steering axle (trailing axle). Excavator bridge. Wheel wells (50 cm). Mech ramps (length: 2450 mm). Dimensions: Neck: L: 3450mm. W: 2550mm. H: 1400mm. Kingpin height: 1200mm. Floor: L: 9300mm. W: 2550mm. H: 900mm. Tires: 235/75R17.5 50%. German Trailer! ID NO: 678. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. Isdpfx Anjy Ayy Njksia = Further information = Year of construction: 2021 Curb weight: 9,446 kg Payload: 40,054 kg GVWR: 49,500 kg = Company information = For more information: WhatsApp:

Condition: used, color: red, Year of construction: 2018, Meusburger MTS-3. Year: 2018. 10 tons BPW axles. Weight: 11,700 kg. Load capacity: 36,300 kg. Max weight: 48,000 kg. Kingpin load: 18,000 kg. 1st axle liftaxle. 3rd axle steering axle. Airsuspension. Slitted floor. Winch. Hydraulic bridge from floor-neck. Lenght: 3420 mm. Hydraulic works on NATO electricity from the truck. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: -hydraulic from left to right. - lenght: 4600 mm. Toolboxes. Dimmensions: Neck: L: 3750 mm. W: 2550 mm. H: 1440 mm. Kingpin height: 1200 mm. Floor: L: 9730 mm. W: 2550 mm. H: 900 - 950 mm. Tyres: 70%. German Trailer! ID NR: 408. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2018 Unladen weight: 11,700 kg Payload: 36,300 kg GVW: 48,000 kg = Company information = Iodpfxey Ayyve Ankoia For more information: WhatsApp:

Condition: used, color: blue, Year of construction: 2016, Faymonville F-S43-1ABA. Year: 2016. 10 tons SAF axles. Weight: 12,600 kg. Load capacity: 29,400 kg. Max weight: 42,000 kg. Kingpin load: 18,000 kg. Hydraulic works on NATO. Allu boards on neck. Winch with Remote Control. Hydr. bridge from floor to neck. - Lenght: 3000 mm. Airsuspension. Slitted floor. Powersteering 3 steering axles. 2 point hydraulic outriggers on the back. 2 way hydraulic ramps: - length: 2850 + 1750 mm. - hydr. from left to right. Dimmensions: Neck: L: 3750 mm. W: 2500 mm. H: 1350 mm. Kingpin height: 1150 mm. Floor: L: 9600 mm. W: 2500 mm. H: 900 mm. Tyres: 235/75R17.5 80%. Iedpfjy Ayyijx Anksia German Trailer! ID NR: 437. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2016 Unladen weight: 12,600 kg Payload: 29,400 kg GVW: 42,000 kg = Company information = For more information: WhatsApp:

Condition: used, color: yellow, Year of construction: 2017, Goldhofer STZ-L5 (245) A. Year: 2017. 10-12 tons BPW axles. Weight: 17,900 kg. Load capacity: 52,100 kg. Max weight: 70,000 kg. Kingpin load: 20,000 kg. 8.10 meter extandable. Hydraulic from trailer works on hydraulic from a truck. Airsuspension. Allu boards and toolbox on neck. Powersteering 5 steering axles. Radio remote control. Dimmensions: Neck: L: 3700 mm. Iijdpfx Aey Ayx Ssnkea W: 2480 mm. H: 1500 mm. Kingpin height: 1300 mm. Floor: L: 11,780 mm. W: 2750 mm. H: 900 mm. Tyres: 245/70R17.5 60-90%. German Trailer! Top condition! ID NR: 583. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2017 Unladen weight: 17,900 kg Payload: 52,100 kg GVW: 70,000 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, color: red, Year of construction: 2008, Broshuis 31N5A (E2190/27). Year: 2008. 10-ton SAF axles. Unladen weight: 11,510 kg. Payload capacity: 38,490 kg. Gross weight: 50,000 kg. Kingpin load: 20,000 kg. Extendable by 6.5 meters. Air suspension. 3rd axle is a steering tag axle (Nachlaufachse). Stainless steel toolboxes. Twistlocks. Dimensions: Neck section: Length: 4,430 mm Width: 2,460 mm Height: 1,500 mm Height incl. aluminium side panels: 800 mm Loading platform: Length: 9,050 mm Width: 2,460 mm Height: 950 mm Height incl. aluminium side panels: 400 mm Tyres: 235/75R17.5, 70% tread remaining. ID No.: 554. Isdpfxoy Ayw Ue Ankjia The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, as well as to all agreements concluded and the preceding negotiations. By responding in any form you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these. Our prices are net export prices. = More information = Year of manufacture: 2008 Unladen weight: 11,510 kg Payload: 38,490 kg Gross combination weight: 50,000 kg Extendable chassis: Yes = Company information = For more information: WhatsApp:

Condition: used, color: black, Year of construction: 2001, Broshuis 3 ABD-48. Year of manufacture: 2001. 8-11 ton BPW axles. Iisdpfx Ansy Ayw Iokea Unladen weight: 13,000 kg. Gross weight: 51,000 - 57,000 kg. Kingpin load: 18,000 - 24,000 kg. Extendable up to 2.5 meters. 3 axles with power steering. Air suspension. Dimensions: Neck: Length: 3,750 mm Width: 2,500 mm Height: 1,500 mm Kingpin height: 1,200 mm Loading floor: Length: 4,880 mm Width: 2,500 mm Height: 400 mm Floor thickness: 250 mm Rear trailer section: Length: 4,300 mm Width: 2,500 mm Height: 950 mm Tyres: 245/70R17.5, remaining tread 70% Dutch trailer! ID No.: 519 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements concluded by Heinhuis, and any negotiations preceding them. By responding in any way, you acknowledge and accept the applicability of the Heinhuis General Terms and Conditions and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2001 Unladen weight: 13,000 kg Payload: 44,000 kg Gross vehicle weight: 57,000 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, maximum load weight: 31,250 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2016, loading space length: 19,480 mm, loading space width: 3,000 mm, loading space height: 780 mm, total width: 2,550 mm, total height: 2,300 mm, Year of construction: 2016, Equipment: ABS, Broshuis E-2190/24 semi low-loader trailer First registration Gigant axles 1 lift axle Drum brakes with ABS and EBS Tyres: 205/65 R17.5, 35/40% tread Air suspension Gross weight: 42,000 kg, unladen weight: 10,750 kg, payload: 31,250 kg Gooseneck length: 4.15 m, bed length: 8.93 + 6.40 m, width: 2.55 m + 2x25 cm, loading floor height: 78 cm Total loading length: 19.48 m Rear supports Stake pockets Lashing rings Subject to errors, typographical mistakes and intermediate sale. Iodsy A Apmspfx Ankjia

Condition: used, Year of construction: 2008, SCHEUERLE SPMT 3000. Powerpack: Z 340 MA. Year: 2008. Operating hours: 3,508. Weight: 7,300 kg. 338 kW MAN engine. Dimensions: L: 4,100 mm, W: 2,850 mm, H: 850 mm. 6-axle module: PEKZ 210.12.4-3000. Year: 2008. Operating hours: 8,321. Weight: 24,200 kg. Payload: 215,800 kg at 0.5 km/h. Axles: 6 x 40 T SAF axles. Dimensions: L: 9,000 mm, W: 3,000 mm, H (min): 950 mm, H (max): 1,600 mm. 6-axle module: PEKZ 210.12.4-3000. Year: 2011. Operating hours: 12,066. Weight: 24,200 kg. Payload: 215,800 kg at 0.5 km/h. Axles: 6 x 40 T SAF axles. Iodpfeyln Npsx Anksia Dimensions: L (min): 950 mm, H (max): 1,600 mm. 4-axle module: PEKZ 140.8.4-3000. Year: 2008. Operating hours: 6,215. Weight: 16,500 kg. Payload: 143,500 kg at 0.5 km/h. Axles: 4 x 40 T SAF axles. Dimensions: L: 6,000 mm, W: 3,000 mm, H (min): 950 mm, H (max): 1,600 mm. 4-axle module: PEKZ 140.8.4-3000. Year: 2008. Operating hours: 5,814. Weight: 16,500 kg. Payload: 143,500 kg at 0.5 km/h. Axles: 4 x 40 T SAF axles. Dimensions: L: 6,000 mm, W: 3,000 mm, H (min): 950 mm, H (max): 1,600 mm. Radio remote control. ID NR: 101. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotes by Heinhuis, all agreements concluded with Heinhuis, and all preceding negotiations. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and confirm that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2008 Price: On request = Company Information = For more information: WhatsApp:

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 17,320 mm, loading space width: 3,200 mm, loading space height: 400 mm, total length: 17,320 mm, total width: 3,200 mm, suspension: hydraulics, tire size: 245/70 R 17.5 | 143/131L (146/146F), color: beige, Year of construction: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Payload King-pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Unladen weight: 20,200 kg Pay load: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2 extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King-pin height: +/- 1,340 mm Additional Equipment: Gooseneck with integrated 1-axle pendle axle Hatz Diesel power pack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2 extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights King-pin 3.5” Central greasing system with 2 BEKAMAX pumps Iiedpfx Ansvzaanjkea = Further information = General Information Year of manufacture: 2021 Axle Configuration Tyre size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 1: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 2: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 3: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 4: Double wheels; lift axle; max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross vehicle weight: 85,000 kg Functional Loading platform height: 40 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial information Price: On request Further information For more information, please contact Stefan Schaapveld.

Condition: used, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - Electronic braking system (EBS) - Lifting axis - Spare wheel = Notes = MEASURES & DIMENSIONS Gross Vehicle Weight (kg) : 58,000 Loading Platform Length (mm) : 9,000 Weight of Axle Group (kg) : 36,000 Total Length (mm) : 13,550 Kingpin Capacity (kg) : 22,000 Total Width (mm) : 2,550 Curb Weight (kg) : 12,300 Loading Platform Height (mm) : 920 Pay Load (kg) : 45,700 Height of 5th Wheel (mm) : 1,310 CONSTRUCTIONS Base chassis Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis. Outer frame is UPE 240 profile. Welding (Chassis) : Automatic ARC submerged. Welding (Superstructure): Automatic robot welding. Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand Drum brakes 3 x 12 Ton axles Iodpsy Amt Nefx Ankjia Axle Lifting: 1st axle automatic Suspension (Type): Air Suspension. Steering Axles: 3rd Axle self steering. King pin (Type) : 1 position with 1x coupling-pen 2” (EU approved) Çayırova Brand. Tires: 12+1 Units, 245 / 70 R 17.5 Fulda or Pirelli or Goodyear Brand. Rims: 12+1 units, 6.75 x 17.5 steel rims. Jantas or Ako Brand. Landing Gear: Mechanically operated by one side, two speed. Gos Brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation. Brake chamber 1 axles with 2 units emergency brake chambers. 2 axle with 4 unit service brake chambers. Electric system 24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA brand. • 2 x Rear Stop Lights. - 4 x Side LED Lights. • 2 x White LED Lights - 2 x Front LED Lights • 2 x Registration Plate Lights - 2 x rotating Lights Floor Above tires and edges of platform are covered checkered sheet and hard wood,the middle surface is covered by flat sheet steel. Rear loading ramps Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable push – button for remote thing type rear ramps length 2500 mm +1500 mm width 900 mm, covered all r ramps are sliding internal and external hydraulic. Short steel ramps behind neck. Color : Upon Request Paint Application Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pcs of heavy duty lashing rings mounted on the outer frame mushroom type • 4 x Certificated Expray mud flaps. • 1 x Plastic water tank • 2 x Wheel chocks and holders • 2 x 7 Galvanized side extension brackets 250 mm + 250 mm • 2 x side protections, aluminum • 1 x tool box. • 1 x spare wheel carrier with 1 tire (on the gooseneck) • 2 x manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x side extension reflectors • Steel front panel(height:400mm) • Aluminum side panels on gooseneck section(height:400mm) • 1 plaque places on rear ramps or bumpers = Further information = Curb weight: 12,300 kg CE marking: yes

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,300 kg, permissible axle load (axle 2): 10,300 kg, permissible axle load (axle 3): 10,300 kg, first registration: 10/2020, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 265/70R19.5, Year of construction: 2020, Axle configuration Tyre size: 265/70R19.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 10,300 kg; Tyre tread depth left inner: 70%; Tyre tread depth left outer: 70%; Tyre tread depth right inner: 70%; Tyre tread depth right outer: 70% Rear axle 2: Twin tyres; Max. axle load: 10,300 kg; Tyre tread depth left inner: 70%; Tyre tread depth left outer: 70%; Tyre tread depth right inner: 70%; Tyre tread depth right outer: 70% Rear axle 3: Twin tyres; Max. axle load: 10,300 kg; Steering axle; Tyre tread depth left inner: 60%; Tyre tread depth left outer: 60%; Tyre tread depth right inner: 60%; Tyre tread depth right outer: 60% Weights Unladen weight: 10,890 kg Payload: 40,010 kg Gross vehicle weight: 50,900 kg Functional Loading platform height: 95 cm Condition Iiedpfx Aoy Akqljnkea Technical condition: good Visual condition: good

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2006, loading space length: 13,600 mm, loading space width: 2,520 mm, total width: 2,530 mm, suspension: air, color: yellow, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - EBS - Hardwood floor - LED lights - LED work lights - Steering axle - Air suspension - Trailing steering axle - SAF axles - Drum brakes - Widening - Toolbox = Notes = Nooteboom Year 2006 6M extendable – 13.60 - 19.60 m SAF axles, drum brakes Axle 3: Trailing steering axle Widening elements Width markers LED lighting Iijdpfoxuvmyox Anksa = Further Information = Axle configuration Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Steering; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 9,000 kg Payload: 39,000 kg Gross vehicle weight: 48,000 kg Functional Extendable body: Yes Condition Technical condition: Average Visual condition: Good Damages: None Identification License plate: OJ-19-JB = Company Information = Interested in financing this vehicle? No problem. We will quickly arrange a favorable finance lease contract for you with terms of 12, 24, 36, 48 or 60 months. All photos and further information can be found at or contact us directly.

Condition: used, empty load weight: 12,360 kg, maximum load weight: 32,640 kg, first registration: 11/2010, next inspection (TÜV): 09/2024, total length: 20,000 mm, total width: 25,500 mm, total height: 7,000 mm, suspension: air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,035 mm, front tire size: 245/70 R 17.5 /10mm, operation weight: 45,000 kg,

Condition: new, Year of construction: 2026, = Additional Options and Accessories = - Spare wheel = Notes = Iiedpfsyimfnsx Ankea Masses and Dimensions: The vehicle has a gross weight of 70,000 kg and a payload capacity of 60,000 kg, with an unladen weight of 13,440 kg. The overall length is 14,900 mm, width 3,000 mm, and loading height 1,350 mm. The loading platform is 10,500 mm long, and the fifth wheel kingpin height is 1,400 mm, with a kingpin load capacity of 22,000 kg. Construction and Chassis: The chassis is a heavy-duty I-beam frame made from S355 steel with fully automated ARC welding. The axles are Özgül 16-ton drum-brake axles with mechanical leaf spring suspension (12–14 leaves). The vehicle is fitted with a single-position kingpin (2” EU approved) and 12+1 tires on steel rims. The braking system is a two-line air brake system with emergency brake chambers. The loading platform features chequered steel plates combined with hardwood edge boards. Technical Specifications and Accessories: Equipped with hydraulic rear loading ramps (2,800 x 900 mm) with remote control, a 24V electrical system (SAE/ADR standard), and all-round lighting. = Further Information = Unladen weight: 13,440 kg

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, loading space length: 13,870 mm, loading space width: 2,550 mm, Due to the large number of illegitimate emails / Emails will not be answered WhatsApp Loading height: 85-90 cm Ijdpfjxptnqex Ankeia Last axle = steering axle Tyres: 215/75R17.5 NO TÜV / NO SP "SUBJECT TO ERRORS, TYPOS AND PRIOR SALE"

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres Iiedpfjyrkpxjx Ankea * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 04/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle no.: G400133 En route to our yard in Kaufungen - Kassel, Germany, immediately available More INFO via Luis Lucena LANGENDORF Low Loader SATÜ 30 – 10.0 M with wheel recesses Year of manufacture: 2020 Radio remote control 3 axles – 2 steered – 1 liftable Length: 13,900 mm Loading area: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Iisdjy A Uxaopfx Anksa Errors excepted We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC Commercial Vehicles GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, maximum load weight: 40,320 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full inventory of vehicles, including those available immediately or at short notice, on our website. Partial equipment overview. Full equipment details available on request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Load area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate over axles Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Braking system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, 24 volt ASPÖCK-NORDIK LED lighting (ASS3) Iiodjy Aug Djpfx Ankoa * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel structure made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM-metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Rims Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * At the gooseneck and at the rear, left and right, a holder for warning signs each, including socket * 2" kingpin * One galvanized steel front wall * At the galvanized connection bar at the front, yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Holder for beacon at the rear of the trailer * Height-adjustable tarpaulin frame – approx. 3,960 mm * Galvanized front wall with tensioning mechanism for sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA brand roof, sliding forward on ALU roof beam profiles (bolted with front and rear wall) * In the loading area 3 pairs of sliding stakes * Body can be hydraulically extended at the rear to the left and right by approx. 750 mm * Sliding roof with pivotable portal beam * Sliding tarpaulin with 700 mm excess length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear body closed with anodized ALU double-wing doors * Hook-on bar for ALU approach ramps at the rear of the vehicle * Control valves for hydraulic width extension located on the right-hand side of the trailer * White reflector tape according to EU regulations, red at the rear * Electro-hydraulic unit at the rear under the loading area * One mud flap at the rear of the trailer * European reflector boards (red-yellow) on the rear of the trailer * Hand

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve Iedpfxoy Auh Io Ankeia * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Weights: * Gross vehicle weight (permissible): 24 t Iedpfx Asy Aug Renksia * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 36,590 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Full specification on request. Gooseneck: * Gooseneck with 45° beveled front corners and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading platform: * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) Isdpfey Auifsx Ankjia * Hardwood floor approx. 48 mm thick, checker plate covering over the axles Tyres: * Tyres 245/70 R 17.5 3PMSF – Manufacturer of our choice. Load index (146/146F) TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve * Axle tool Brake system: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel structure automatically shot-blasted with centrifugal blasting machine after welding * Second blasting with corundum for optimum adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red, as per RAL 841GL system * Rims in silver grey * Rear section metallised and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanized steel headboard approx. 400 mm high * Yellow-red air couplings on the galvanized connection strip at the front * One spare wheel holder in front of the headboard (without spare wheel) * Electro-hydraulic power unit * Remote rear axle steering, operated from the front and rear using cable remote control with push buttons, with axle track control (without installation in tractor unit) * Hook-on rail for aluminum loading ramps on gooseneck with integrated collision guard * At the gooseneck and rear plate, one bracket each side for warning boards, including socket * One bracket for a rotating beacon at the rear of the trailer * Galvanised folding supports under the rear slope of the loading platform * 1 pair of recessed lashing rings along the main beam, rear, in the chamfer (LC 10,000 daN) * Load manometer for determining axle loads, including load diagram * Non-slip sand coating painted on checker plates on gooseneck and loading platform * On the gooseneck, plug-in aluminium side and rear panels, approx. 2,440 x 400 mm (L

Condition: new, maximum load weight: 58,860 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment; complete equipment list available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 500 mm x 8° * 8 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Iodpoy Augwjfx Ankoia Two-part steel ramps: * Pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramps with hydraulically folding ramp sections * Hydraulic lifting device, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in transport position are not included in the overall vehicle length of 16,500 mm Axles: * BPW axles and suspension, 1st axle steering, 2nd and 3rd axles rigid, 4th and 5th axles trailing steering, air suspension with lift/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data is transmitted to the tractor unit via the standardized EBS interface (ISO 11992). For correct readout, the tractor unit must be capable of transmitting and displaying these data. Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (tested to approx. 50 t) Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations; 24 volt ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lamps flash with the indicators * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Entire steel structure automatically blasted after welding using a centrifugal blasting machine * Second blasting step with corundum grit for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final lacquer with 2 coats of 2-component topcoat, solid color RAL 3002 Carmine Red, compliant with the RAL 841GL system * Rear section metallized and painted RAL 9010 (Pure White) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings mounted on the galvanized connection rail at the front * Bracket for beacon light at the rear of the trailer * Galvanized supports under the loading platform’s rear bevel * Super Grip 2 rubber coating

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire. SPECIFICATION: GOOSENECK: * Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * On the gooseneck and rear taper: open grating with 5 mm steel reinforcement * 2-inch kingpin * Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO connector on the front panel (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish * 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit CARGO AREA: * Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6° * Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg * Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading TYRES: 235/75 R17.5, 3PMSF, twin tyres. Make at our discretion * TPMS tyre pressure monitoring system compliant with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with starting aid * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve HYDRAULIC LOADING RAMPS: * 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm * Hydraulically folding ramp tips * Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward * Strobe lights at ramp tips, switch positioned next to ramp controls * Ramp transport lock in driving position with quick-release * Painted non-slip coating on outer frame and ramp tip * Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment * Ramp control valves on right side of vehicle Iodpfxjy Auhhs Anksia BRAKE SYSTEM: WABCO EBS-E braking system, compliant with EU regulations SURFACE TREATMENT: * Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection PAINTWORK: * Trailer body Carmine Red (RAL 3002) * Rims Silver Grey * Side walls Aluminium natural finish * Hub caps as per axle manufacturer * License plate holder Pure White (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps * Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted * Additional 2 pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller * Deflection pulley for the winch, with shackle and bolted lashing point

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece Iiodpfx Ansy Auhnokoa * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Iisdpsy Auhuefx Ankea Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O