Low loader trailer

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Equipment: ABS, Weights PP004045B Permissible gross weight: 24 t Technical gross weight: 30 t Dimensions PP004048B Approx. 2,100 mm = raised front platform incl. gooseneck, corners chamfered Approx. 5,350 mm = low-bed platform – level loading area Approx. 850 mm = rear drive-on slope PP004047B Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) PP004046B Loading height when loaded approx. 870 mm PP002560B When forming a tractor-trailer combination, ensure legal maximum overall height and length are not exceeded! Frame PP004054B Steel welded construction with front gooseneck and rear chamfer, drive-on slope with excavator bucket recess in the middle = rear depression between longitudinal members, approx. 2,300 mm Integrated outer frame: 5 pairs of approx. 4 t lashing brackets (4 in the low-bed, 1 on the raised platform) 7 pairs of recessed, retractable approx. 10 t lashing rings (4 in the low-bed, 1 in the drive-on slope, 2 on the raised platform) PP001519B Standard ball bearing turntable Frame attachments PP004068B Removable extensions with softwood planks approx. 50 mm on both sides of the low-bed platform (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) PP006218B 4 pairs of foldable approx. 10 t lashing rings, layout: 1 pair at the front on the raised platform, inside the longitudinal frame members 1 pair at the rear in the excavator bucket recess, left and right 1 pair at the front of the raised platform ahead of the gooseneck, inside the longitudinal frame members 1 pair at the rear of the low-bed before the drive-on slope, in the bucket recess left and right Drawbar assembly PP004065B Fixed drawbar with oscillating towing eye approx. 40 + 50 mm, gooseneck design, silent bushing mounting, drawbar retaining spring with tensioner CALC Truck coupling height approx. 830 mm to approx. 1,030 mm PP004059B Drawbar length approx. 1,800 mm Support gear PP004057B 2 automatic folding rear supports Axles PP004114B SAF air-suspended lowbed axles with drum brakes, load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusting devices Wheels PP000245B 12 tires, 235/75 R 17.5, 141J, brand per manufacturer's choice Brake system / suspension PP004056B Brake system according to ECE regulation R13, dual-line air brake system; brake system brand Wabco, EBS system 4S3M, sensors on 1st + 2nd axle PP000050B RSS/RSP – stability program PP001532B Spring-actuated parking brake on 2nd + 3rd axle PP001536B Brake/air connecting lines with 2 single coupling heads yellow/red, EBS/ABS connection cable PP004111B Air suspension with lifting and lowering device (rear axles only), automatic driving level adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems PP008965B SWIT – Schwarzmüller Intelligent Telematics PP004276B Axle load indication via EBS CAN bus signal for display in the cab (truck must be equipped accordingly; no calibrated scale) PP008889B Tire pressure monitoring according to ECE regulation 141, with air pressure sensor in wheels, display in the cab (display device etc. must be present in the tractor unit) Floor PP007568B Approx. 50 mm impregnated softwood floor, protruding approx. 5 – 10 mm above upper edge of frame, steel chequer plate covering over wheels Ramps PP007134B 2 foldable one-piece lightweight steel ramps, approx. 2,800 mm length, approx. 750 m Giodpfx Asy Aug Rjfnor