Used Barents Be Semi-Trailers for sale (31,938)

Condition: new, functionality: fully functional, color: black, VIBERTI STRONG CURTAIN SIDE TRAILER (FRENCH TYPE) BRAND NEW FROM FACTORY - Lifting first axle - Steering third axle - Chassis length: 13.60 meters - Full air suspension Rear roof cross member with 4-position height adjustment (0, +50, +100, +150 mm), foldable with reinforced gas springs • Internal usable height: 2700 mm - 6 tires: 385/65r22.5 - Brake and suspension management system with EBS 2S/2M and electronic stability control (anti-rollover) - LED side lights - 2 air tanks Floor for 34 rollable Euro pallets with plywood panels and phenolic coating Chassis color: grey Telescopic supports Steel underrun protection bar POSSIBILITY OF TAILORED FINANCING OR LEASING AT OUR BRANCH. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. ADDITIONAL LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) OFFICE – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 Hnjdexcyh Repfx Aaask 335 6713062 OFFICE HOURS: MONDAY–FRIDAY 8:30 AM–7:00 PM – SATURDAY 8:30 AM–2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed bed – Crane – Tipper – 4 axles – 4 Rear axles – Tway – T-Way 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtainsider – Box – Load-lifting tailboard – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines any responsibility for discrepancies in technical equipment, options, and features, which may, in some cases, differ from those indicated in the description. Please verify the features of each specific vehicle.

Condition: new, functionality: fully functional, Year of construction: 2025, KOGEL CURTAIN-SIDER SEMI-TRAILER FRENCH SPEC Hedpfx Aaexc Nckjajnk TYRE SIZE: 385/65R22.5 LOADING DECK HEIGHT (UNLADEN): 1,200 mm INNER USEFUL HEIGHT UNDER ROOF: 2,700 mm – 2,900 mm (front adjustable by 8x25 mm, rear adjustable by 4x50 mm) SLIDING ROOF (TARPAULIN ROOF) 1ST AXLE LIFTABLE 3RD AXLE STEERING BPW AXLES 2 TOOLBOXES 30 mm MULTILAYER FLOOR ADR KIT RO-RO EQUIPMENT FOR TRANSPORT BY SHIPS AND FERRIES CUSTOMIZED FINANCING OR LEASING AVAILABLE ON SITE. FROM 24 TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES LOCATION DOMENICO ESPOSITO S.P.A. EBOLI (SA) LOCATION - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu – Dropside– Crane– Tipper – 4 axles – 4 Rear Axles – Tway– T-Way-540- 460 HP - Xway– X-Way – Trilateral – V8 – Scania – Frost Edition Curtain-sider– Box Body – Tail-lift – Refrigerated Cell – Insulated With Fridge – Van Domenico Truck srl declines all responsibility for any differences in technical specifications, extras, or features, which in some cases may differ from the description provided. We invite you to verify the specifications of the specific vehicle.

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Edge rail on neck Winch preparation Self-steering axle CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM - 7:00 PM / SATURDAY 8:30 AM - 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Hsdpfjxpi A Rsx Aaaonk Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semitrailer-Refrigerated Semitrailer Tipper – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box body-Liftgate - Refrigerated Cell- Insulated with Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the specifications of the specific vehicle.

Condition: new, functionality: fully functional, “BRAND NEW - KÖGEL SMR CURTAIN-SIDER COIL CARRIER, VARIABLE HEIGHT Hnodpfx Aowydzfjaaok - 5th wheel height: 1200 mm - Usable internal height under the roof: approx. 2,700 - 2,900 mm [adjustable at the front in 8 steps of 25 mm each; at the rear in 4 steps of 50 mm each] - Usable length of coil well: approx. 9,000 mm, suitable for accommodating coils with a minimum diameter of 900 mm and a maximum diameter of 2,100 mm. - RO-RO equipment for transport by ship and ferry - 1st axle liftable - 3rd axle steering - Sliding roof (Easy Top Open/Close) - 6x PREMIUM TYRES 385/65 R22.5 - ADR KIT Possibility of custom financing or leasing on site. From 24 up to a maximum of 96 instalments, with zero down payment also available. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30-19:00 / SATURDAY 08:30-14:00 WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – MAN – Nissan V8 – Intarder- 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed body – Truck-mounted crane – Tipper – 4 axle – Rear 4 Axle – Tway – T-Way-540 – 460 hp – Xway – X-Way – Trilateral – V8 – Scania – Frost Edition Curtain-Sider – Box – Tail-lift – Refrigerator Cell – Insulated with fridge – Van Domenico Truck srl declines all responsibility for potential discrepancies regarding technical specifications, optional equipment, and features which, in some cases, may differ from those stated in the description. Please verify the characteristics of the specific vehicle.

Condition: new, Equipment: ABS, TECNOKAR SUPERTOP F1 6900 - AXLES: One single axle 9 ton, two twin axles 12 ton. R22.5 - AXLE CONFIGURATION: 1st axle liftable and self-steering, 2nd and 3rd axles fixed - VOLUME: 28 m³ - BODY STRUCTURE MATERIAL: Standard in DOMEX - FLOORPLATE MATERIAL: Wear-resistant steel, hardness HB 450 - FLOORPLATE THICKNESS: 6 mm - SIDE PANEL MATERIAL: Wear-resistant steel, hardness HB 450 - SIDE PANEL THICKNESS: 4 mm REAR: Made with high yield strength steel - REAR TAILGATE TYPE: Tipping with gasket and securing rods, fully hydraulic opening - REAR TAILGATE VERSION: Integrated into the body - HYDRAULIC OPENING VERSION: With protruding arms and protective wedges - REAR TAILGATE LOCKING: Hydraulic with hooks on side panels - DOUBLE JOINT ANTI-JAMMING SYSTEM: Yes - SEALING TYPE: Gasket on the body with 5 tightening wing nuts - REAR OVERHANG: With extension for paver, flush with the floor - SHAPED SADDLE: No - COVER TYPE: Cramaro - COVER HEIGHT: 400 mm Standard Equipment and Accessories: - MANUAL LOCKING OF STEERING AXLE - REVERSING ALARM - SPEED DISCS - ECOLED II LED REAR LIGHTS - PRESSURE GAUGE FOR MONITORING LOAD CAPACITY - PAIR OF REAR TOWING EYELETS - MANUAL FOLDING BUMPER WITH ROUND UNDERRUN BAR - QUICK UNLOADING SYSTEM - ANTI-VIBRATION RUBBER BUFFERS - TPMS TYRE PRESSURE MONITORING SYSTEM - SAF SWINGING RETRACTABLE LANDING GEARS - REMOTE CONTROL FOR ELECTRIC COVER AND VIBRATOR - UNDERSIDE VIBRATOR - 10 x 9.00 R 22.5 ALCOA DURA BRIGHT ULTRA ONE ALLOY WHEELS - 10 CONTINENTAL 315/80 R 22.5 TYRES PERSONALISED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OFFICE OPENING HOURS: MON-FRI: 8:30 am - 7:00 pm | SAT: 8:30 am - 2:00 pm Hodjvzh Ugepfx Aaaonk WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S - Semi-trailer - Refrigerated Tipper Trailers – Lamberet - Schmitz – Isuzu – Rigid Flatbed – Crane – Tipper – 4 axles – Rear 4 Axles – Tway – 540 - 460 hp – Xway – Trilaterale – V8 – Scania – Frost Edition – Curtain side – Box – Loading gate – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies regarding technical specifications, equipment, or options which may, in some cases, differ from what is described. We invite you to verify the specifications of the particular vehicle.

Condition: new, tire size: 315/80R22.5, Equipment: ABS, 🇮🇹SEM. MENCI SA700G TIPPING BODY - CHASSIS TYPE: SA700G - AXLE BRAND: ROR CAMPANATO ETO - AXLE CONFIGURATION: 1 STEERING + 2 FIXED DISC BRAKES - KNORR SYSTEM 2 SENSORS / 2 CHANNELS, LIFTING DEVICE, 1 LIFT AXLE WHEELBASE: 1310 mm STANDARD LEGS CHASSIS COLOUR: METALLISED GREY MENCI MANUAL ANTI-UNDER-RUN BAR PENTA CYLINDER BODY TYPE: ROUND BODY BODY MATERIAL: STEEL BODY LENGTH: 7450 mm BODY HEIGHT: 1840 mm REAR DOOR B, INCLINED 20 DEGREES BODY CAPACITY: 30 m³ - FLOOR THICKNESS: 5.5 mm HB 500 - SIDE PANEL THICKNESS: 3.5 mm HB 500 - FRONT WALL THICKNESS: 4 mm HB 500 - TAILGATE THICKNESS: 4 mm HB 500 - HYDRAULIC TAILGATE OPENING HYDRAULIC DOG RELEASE NO. 2 SAFETY LOCKS BODY COLOUR: WHITE IVECO IC194 SIDE STRIPES COLOUR: BLUE RAL 5010 TAILGATE WITHOUT SEAL TPMS BRAND: KNORR REAR LIGHTS TYPE: EUROPOINT III NO. 10 SPEEDLINE DISCS 22.5X9.00 BOLT HOLE MOUNTING D.26 NO. 10 TYRES: GY 315/80R22.5 KMAX SG2 VIBRATOR PRE-ARRANGED STAINLESS STEEL TOOL BOX 400X300X450 mm STANDARD PRESSURE GAUGE NO. 2 TOW HOOKS HIGH-SPEED DUMP VALVE WITH PUSH BUTTON CRAMARO ELECTRIC ROLL COVER SYSTEM TYPE C REMOTE CONTROL COVER SYSTEM: YES COLOUR: BLUE RAL5010 ARCH HEIGHT: 500 mm ROLLER HOOKS CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS Hsdpfjvzh T Njx Aaasnk CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Tank Semi-trailer – Lamberet - Schmitz - Isuzu – Fixed Flatbed – Crane – Tipper – 4 axles - 4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Three-way - V8 - Scania - Frost Edition Curtain Side – Box Body – Tailgate Loader – Refrigerated Cell – Insulated With Fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies regarding technical equipment, options, or characteristics which may, in some cases, differ from those indicated in the description. We invite you to verify the features of the specific vehicle.

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, MENCI SEMI-TRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x H 2,000 mm Floor: 6 mm Rear Floor: 8 mm Unladen Weight: 6,650 kg GVW: 39,000 kg Description, Version & Accessories - 3rd steering axle SAF with disc brakes Ø430 (ET120) 2/2 - 1st axle with automatic lifting - CRAMARO hermetic electric tarpaulin type C (2023) with cover - Stainless steel toolbox 90x50x50 cm - Toolbox 90x50x25 cm - Complete ADR kit + A & R plates - Pressure gauge - Electric motovibrator operated by remote for cover system - PROMETEON 385/65 R 22.5 tyres - Steel rim 385/65 R 22.5 OFFSET 0/120 - Remote control for CRAMARO tarpaulin - Additional rear LED work light - Painted hubs - Full LED rear lighting - TPMS (Tire Pressure Monitoring System) - Hub color: RED RAL 3020 - Tarpaulin cover color: BLUE RAL 5002 - Tarpaulin height at bows H=300 mm - Cover with ADR tarpaulin - 3 access steps - Anti-wear triangles Chassis in steel, body in alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and load-sensing valve - Electrical system according to A.D.R. regulations Hedpfxovzh T Aj Aaaenk - Aluminum air tanks, pneumatic quick suspension release device - Tipping system with front 5-stage telescopic cylinder - Pneumatic parking brake - Descent safety valve, double-acting piston hydraulic system with gate valve - Front ladder and removable ladder over the mudguards - 2 towing eye holes on rear underrun protection bar hinge FINANCING OR TAILORED LEASING OPTIONS AVAILABLE ON SITE. From 24 up to 96 installments, also with zero down payment. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-Trailer - Refrigerated Semi-Trailer – Lamberet - Schmitz Isuzu - Fixed Box - Crane - Tipper - 4 axle - Rear 4 Axle - Tway - T-Way-540- 460 hp - Xway - X-Way - Three-Way - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tail-lift Body - Refrigerated Unit - Insulated With Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies regarding technical specifications, options or features that may in some cases differ from those described. Please verify the specific features of the vehicle.

Condition: good (used), functionality: fully functional, empty load weight: 6,300 kg, maximum load weight: 32,700 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 11/2006, next inspection (TÜV): 05/2024, loading space length: 9,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: orange, Year of construction: 2006, Equipment: ABS, sem ccfc container chassis for transporting 30ft and 20ft balanced containers, tipping system for 30ft only, rotocella included x bulk unloading, no. 4 twst crossbars, stainless steel through box, year 2006, 3 disc axles with 1st liftable, adr , crossed pink , overhauled until 30.05.2024-CONCESSIONARY INTEDIVE SRL-PARMA Hodsrignhspfx Aaajnk

Condition: used, empty load weight: 6,720 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 12,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 425/65 R22,5, wheelbase: 2,000 mm, Equipment: ABS, Colour RAL 6416 turquoise green EBS Disc brakes Payload 28,280 kg BPW axles 2x 10,000 kg, both forced-steered Hodjww Ixcjpfx Aaaenk Lifting and lowering device Rigid underride guard 10 pairs of stanchion pockets Aluminium floor Container locks 2 pairs Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, empty load weight: 15,900 kg, maximum load weight: 42,100 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 11/2001, loading space length: 8,960 mm, loading space width: 2,520 mm, total length: 12,950 mm, total width: 2,520 mm, total height: 3,800 mm, suspension: hydraulics, tire size: 245/70R17,5, wheelbase: 1,360 mm, maximum speed: 90 km/h, color: blue, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, Nooteboom MCO-73-04V TOP trailer from first owner, first registered 21.11.2001. Overhauled in 2014. Brakes renewed in 12/2025! Gross train weight 66,000kg with 3-axle tractor unit, Gross vehicle weight 58,000kg, Kingpin load 18,000kg, axle loads for axles 1-4: 10,000/10,000/10,000/10,000kg, Unladen weight 15,900kg, For exact dimensions, please refer to the technical data sheet. Lowbed: 8.96m + 5.50m extension. Hydraulic supports at front and rear make it easy to lift the trailer along with 30t load completely, for side unloading at ramps. Hydraulic suspension (allows leveling with uneven load distribution). Hnodpfoyqm I Uex Aaaok First axle liftable. 4 axles steerable, either automatically or via remote control as required (also for counter-steering). Hydraulic ramps + hydraulically extendable up to 3,000mm, Loading platform expandable up to 3,000mm, Tires: 245/70R17.5, 1st axle: 6/6/6/6mm, 2nd axle: 11/11/8/8mm, 3rd axle: 9/9/7/7mm, 4th axle: 11/11/7/5mm, spare wheel 6mm. Further details on request. Sale only to businesses or for export. Leasing / financing available on request – immediate processing, also possible without down payment! More information and requirements upon request. The vehicle description serves only for general identification of the vehicle. The details, pictures and descriptions are provided without guarantee! Equipment should be checked separately if necessary. The seller assumes no liability for possible typographical or data transmission errors. Subject to errors and prior sale. Thank you very much for your interest! We look forward to your visit. Our SERVICE We are happy to take your used vehicle as trade-in, 30-day customs plates incl. insurance, EUR-1 & all export documentation, TÜV / SP / UVV / Tachograph inspection / OBU installation, Professional delivery to the customer, Transfer from Stuttgart Airport / Sindelfingen Train Station to us by arrangement, Retrofitting of accessories and further individual customer requests possible by arrangement.

Condition: used, empty load weight: 6,000 kg, maximum load weight: 16,000 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 01/2008, next inspection (TÜV): 12/2025, loading space length: 11,780 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, suspension: air, tire size: 275/70 R 22,5, tire condition: 11 %, Year of construction: 2008, Equipment: ABS, 1 axle with disc brakes and steering with Tridec turntable, fixed curtain with aluminum roof, French-style sliding tarpaulins and pillars, rear doors, prepared for vertical load securing posts. Hjdpexrpnfefx Aaasnk

Condition: used, functionality: fully functional, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 09/2026, loading space length: 13,550 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R 22,5, color: grey, Year of construction: 2018, Equipment: ABS, Disc brakes, 1st lift axle, 3rd steering axle, sliding bulkhead, 21-slat hydraulic Cargo Floor moving floor, new manual cover, ladder and accessories Hnodpoxb Exrsfx Aaajk

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: YA9TL510050113953, empty load weight: 27,720 kg, maximum load weight: 70,000 kg, overall weight: 100,000 kg, axle configuration: > 3 axles, first registration: 08/2005, next inspection (TÜV): 12/2026, loading space length: 14,200 mm, loading space width: 3,250 mm, total length: 23,950 mm, total width: 3,250 mm, total height: 1,050 mm, suspension: hydraulics, color: blue, Year of construction: 2005, number of axes: 7, For sale: low loader from Faymonville. Number of axles: 2+5 = 7 Always serviced in our own workshop and is in top condition. The trailer has been used exclusively for transports within the EU – Baltics, Germany, and the surrounding region. Approximately 1–2 times every three months. The low loader is located in Latvia, 3405 Liepaja! Hnjdpfox Afbvjx Aaaok See details in the photos!

Condition: like new (used), SCHMITZ CARGOBULL GROUP CARRIER 3004 HOURS Hnedpsv Exxkofx Aaaek 19/09/2022 FRIDGE PV 8275 KG PALLET BOX OUTDOOR TEMPERATURE DOUBLE DOOR LOCK DOOR SAFETY LOCK

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall Hsdpfx Ajvx E N Aeaasnk -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: new, empty load weight: 11,000 kg, maximum load weight: 38,500 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with 15 x 15 mm square anti-slip bars and widened at the lower section - Between the 1st and 2nd axle, one pair of permanently installed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the rear slope projecting into the loading area for excavator dipper arm storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) - Including 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t per section Two-part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with 48 mm thick hardwood surfacing - Ramps with hydraulically foldable ramp sections, hydraulic lifting gear, and hydraulically transverse-adjustable Axles and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tool kit - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories Included: - At the gooseneck and at the rear, left and right, each with a holder for warning signs, including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks - Galvanized extensions, extendable by approx. 230 mm each side - Galvanized folding supports under the sloped rear of the loading area - Holder for rotating beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension, red at the rear - Rear-mounted electro-hydraulic power unit underneath the loading area Hedpeup U Hzjfx Aaasnk - Ramp control valves mounted on the right-hand side of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Four extendable warning signs, about 423 x 423 mm, each with a position light (extendable about 400 mm) - Mounting for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side walls and rear wall ca. 2,440 x 400 mm - The rear, galvanized plug-in posts are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - One removable, galvanized intermediate table with 1 pair of WADER container pockets - Square anti-slip bars 20 x 20 mm every 200 mm on the outer frame of the rear slope - Painted sand grip layer as anti-slip protection on the checker plates on the gooseneck and loading area - 80 km/h speed stickers at the rear and on both sides - Ax

Condition: new, empty load weight: 8,900 kg, maximum load weight: 40,100 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, operation weight: 8,900 kg, Chassis: - Sturdy steel frame welded construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck section of frame 200 mm with beveled front corners - Tapered gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area behind the rear taper) - 2 king pin positions with replaceable 2” king pin - Outer frame closed outwards as a perforated outer frame - Loading area with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame stepped 80x80 mm before and after the division - Reinforced frame design / point load in retracted state centered at the center of gravity - Without extendable load area widenings, but prepared for retrofit (= guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, running to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (coated with Körapur), depth approx. 400 mm - Underrun protection = extended rear closing plate - Drop-down stabilizers at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift of approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Side aluminum underride protection - 4 wheel chocks with holders - Long license plate holder in rear closing plate - 1 plug-in ECE plate at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 2x on the loading area before extension - 7x after extension - Extendable warning boards incl. 3 marker lamps each, at the front on the landing gear and at the rear before closing plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning boards insertable into stake pockets on the loading area - 6 pairs of stake pockets on the side for stakes 100x50 mm - 2 transverse rows of stake pockets for stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after king pin positions) - 3 transverse rows of stake pockets for stakes 100x50 mm on the loading area from outer frame inward to main frame (1x before extension, 1x after extension, 1x after 3rd axle) Hnodpfx Asxnnk Dsaajk - 2 pairs of steel plates in the loading area for container locks to accept 1x 20ft container - Rubber apron mounted on underrun protection Ramps available as an option.

Condition: new, empty load weight: 9,800 kg, maximum load weight: 39,200 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, operation weight: 9,800 kg, Equipment: ABS, Chassis: - Sturdy welded steel frame construction with front frame drop and flat loading area, rear tapered approx. 500x100 mm Hodoxgm S Dspfx Aaajnk - Gooseneck 200 mm with chamfered front corners - Tapered gooseneck end approx. 500 x 100 mm (traction ribs on outer frame in the area of rear taper) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed to the outside as a perforated outer frame - Loading area with extendable central frame; extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after split with step 80x80 mm - Reinforced frame / point load in retracted position at center of gravity - Without extendable load bed widenings, but prepared for retrofitting (i.e., guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses between 1st and 2nd axle, steel covers (covers with Körapur coating), approx. 400 mm deep - Underride guard = extended end plate - Drop-type rear supports Ramps: - 2 special two-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only with electrohydraulic unit) - Width approx. 800 mm - Wooden surfacing - Incl. traction ribs on loading ramps - Can be secured in travel position with tie-down straps - Operated by control lever mounted at the rear on right side in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch timber floor with aluminium omega profiles Landing Legs: - Mechanical 24t landing legs, single-sided operation, with compensation for uneven support Axles, Steering, and Tyres: - BPW air suspension axles, each 10t axle load, air spring diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device, total lift approx. 200 mm - 2nd travel position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic operation with mechanical emergency actuation via button on trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered inset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks - 1 plug-in ECE plate at rear - 11 pairs ZK modules 10t at sides: - 2x on gooseneck - 2x on loading area before sliding extension - 7x after sliding extension - Extendable warning signs incl. 3 position lamps each, at front on landing gear, rear before end plate, infinitely extendable to max. load width 4,500 mm - 4 insertable brackets for warning signs in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm drop-in stakes - 2 cross rows of stake pockets for 100x50 mm drop-in stakes on gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm drop-in stakes on loading area from outer frame to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates embedded in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Condition: new, empty load weight: 10,100 kg, maximum load weight: 38,900 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, operation weight: 10,100 kg, Equipment: ABS, Chassis: -Sturdy welded steel frame construction with front frame cranking and flat loading platform with rear tapered section approx. 500x100 mm -Frame neck 200 mm with chamfered corners -Chamfered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind the rear taper) -2 kingpin positions with interchangeable 2” kingpin -Outer frame closed to the outside as perforated outer rail for lashing with tie-down straps (no chains possible) -Reinforced frame design / point load at center of gravity -Preparations for extendable loading platform wideners -With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle extending to end of vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underride guard = extended end plate -Drop-down rear support legs Ramps: -2-part special design loading ramps with mechanical extension -Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting gear (only in combination with electrohydraulic unit) -Width approx. 800 mm -Wooden ramp surface -Including traction ribs on loading ramps -Can be secured in transport position with tie-down straps -Operated via control lever, mounted at rear on right side in driving direction -Laterally shiftable via hydraulics Floor: -35 mm larch wood floor with aluminum omega profiles Landing Legs: -Mechanical 24-ton landing legs with single-side operation and load compensation Axles, Steering, and Tires: -BPW air suspension axles, 10 tons axle load each, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake linings -Automatic brake slack adjusters -Lift and lower device with total lift approx. 200 mm -2nd transport position via ball valve +50 mm -1st axle lifting axle (wired via EBS), fully automatic activation with mechanical emergency actuation via push button on the trailer Hnodpewviwksfx Aaask -3rd axle as friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Stakeboard side and rear walls on the gooseneck, approx. 400 mm high, plug-in design -Spare wheel holder -Side aluminum underrun protection -4 wheel chocks -Long license plate mount on rear end plate -1 ECE warning panel at the rear, plug-in -11 pairs of ZK 10t side lashing modules: -2x on the gooseneck -9x on the loading platform -Steel fenders with Clear-Pass -Extendable warning boards incl. 3 position lights each, at the front on the landing legs and at the rear in front of end plate, smoothly extendable up to loading width of 4,500 mm -4 holders for warning panels, plug-in, in stake pockets on the loading platform -6 pairs of side stake pockets for 100x50 mm plug-in stanchions -2 cross rows of stake pockets for 100x50 mm stanchions on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) -3 cross rows of stake pockets for 100x50 mm stanchions on the loading platform from outer frame to main frame (1x at the front section, 1x before 1st axle, 1x after 3rd axle) -2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container -Rubber skirt mounted on underride guard -Steel shot blasting, hot-dip galvanizing of chassis and priming -Paintwork chassis/wheel hubs/outer frame i

Condition: new, empty load weight: 8,950 kg, maximum load weight: 40,050 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,950 kg, Equipment: ABS, Chassis: -Sturdy steel frame welded construction with front frame cranking and flat loading area, rear taper approx. 500x100 mm -Frame neck 200 mm with beveled corners -Beveled end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) -2 king pin positions with interchangeable 2” king pin -Outer frame closed to the outside as a perforated outer frame for lashing with tie-down straps -Reinforced frame design / point load at center of gravity -Provisions for extendable widening of the loading area -With excavator recess, depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underrun protection = extended end plate -Drop supports at the rear Ramps: -2 single-piece aluminum loading ramps with spring assist -Length x width approx. 2,500 mm x 600 mm -Can be secured in transport position with tie-down straps -Laterally manually adjustable Floor: -35 mm larch wood floor with aluminum omega profiles Landing gears: -Mechanical 24 t landing gears with single-side operation and load compensation Axles, steering, and tires: -BPW air suspension axles, each 10 t axle load, air bag diameter 360 mm -S-cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjusters -Lift and lowering device with total lift approx. 200 mm -2nd driving position via ball valve +50 mm -1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via push button on the trailer -3rd axle as self-steering trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, with center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Incl. tire pressure monitoring Brake system: -Dual-line brake with EBS-E incl. RSS -EBS (WABCO 4S3M) -Spring-actuated parking brake -Air connection yellow / red Painting: -Steel grit cleaning, sprayed galvanizing of chassis and primer -Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau -Plastic parts black, unpainted -Rims: factory silver -Reflective strips on the sides and rear in yellow Accessories: -Side and rear plug-in side walls on gooseneck approx. 400 mm high Hjdewu Agiepfx Aaasnk -Spare wheel holder -Aluminum approach guard -4 wheel chocks -Steel fenders with Clear-Pass -Elongated license plate bracket in the end plate -1 removable ECE sign at rear -11 pairs ZK modules 10t on the side: -2x on gooseneck -9x on loading area -Without rear towing eyes -Extendable warning panels incl. 3 position lights each, at the front on the landing gears and at the rear before the end plate, infinitely extendable up to loading width 4,500 mm -4 plug-in mounts for warning panels in stake pockets on the loading area -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x in front of and 1x after king pin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward to main frame (1x at the front section, 1x before 1st axle, and 1x after 3rd axle) -2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection

Condition: new, empty load weight: 29,600 kg, maximum load weight: 72,400 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 6,650 mm, loading space width: 2,840 mm, loading space height: 550 mm, tire size: 285/70 R19.5, color: grey, operation weight: 29,600 kg, Equipment: ABS, Gooseneck: -Hydraulic gooseneck Raisable/lowerable and removable -Length approx. 3,650 mm -For tractor units: 6 x 4 or 8 x 4 2-axle chassis at the front: -Hook attachments at the front and rear -Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator bridge "BB-A": -Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear Hnjdowcmhaepfx Aaajk -Length x base width approx. 6,650 mm x 2,850 mm -Beam height x beam width approx. 400 mm x 1,350 mm -Loading height 550 mm with ground clearance 150 mm 4-axle chassis at the rear: -Mechanical bolt-and-link coupling for attaching a low bed at the front, end cross member at the rear -Chassis length x Chassis width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum axle and tires (front and rear chassis): - "Pendulum axle", all axles hydromechanically steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pins for securing in the raised position - Final axle paint finish with two coats of 2-component paint in MB 7350 Nova Gray - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 285/70 R19.5 Steering: - Front and rear steering can be operated via cable remote control using push buttons, with axle alignment control - Power socket for operating the steering system on the chassis Gooseneck -Cable remote control with pushbuttons including axle alignment control Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -Steel bulkhead, approx. 400 mm high -4 wheel chocks -3.5" kingpins -One 7-pin socket on the left and right rear of the gooseneck for the warning sign -Gallows with winch for spare wheel on the front of the gooseneck -Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must hold at least 80 liters with couplings -Aluminum side walls and rear wall that can be attached to the gooseneck, approx. 400 mm high, anodized -Control lever on the gooseneck protected by a hinged cover -A separate air connection with air gun on the gooseneck -Bekamax central lubrication system, 1x on the Gooseneck, 1x on the 2-axle chassis and 1x on the 4-axle chassis - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-loader hook attachment - 2 spare wheels - One 7-pin socket on the left and right, front and rear of the rear chassis for the warning sign - Front chassis with a separate air connection for pneumatic screwdrivers - Foldable extensions with steel mattresses, adjustable in width from approx. 2,850 mm to approx. 3,250 mm - The steel mattresses can be inserted in two positions to create a lowered loading area - Steel mattresses with rubber flooring, approx. 12 mm thick - Screw-in option (⌀ 40 mm) every approx. 500 mm outside on the upper chord of the outer tube of the excavator bridge for screw rings - One locking point every approx. 500 mm on the extension with mechanical locking Locking mechanism -A socket on the rear chassis for the cable remote control of the self-steering system -Two reversing lights on the rear panel -Four warning signs, approximately 423 x 423 mm, extendable by approximately 2,000 mm, with a position light -One work light, left and right, on the rear panel of the gooseneck with separate on/off switches -Two stainless steel tool boxes, approxim

Condition: new, empty load weight: 10,300 kg, maximum load weight: 39,200 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface can be raised and lowered hydraulically after the gooseneck Length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8° Cut-outs in the outer frame of the cargo bed for attaching tensioning straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: -One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Axles, suspension and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes -Galvanized folding supports under the bevel of the cargo bed -A bracket for a rotating beacon at the rear of the trailer -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -Electric hydraulic unit at the rear, under the cargo bed Hedpfxeu Hp Hrj Aaasnk -One bracket for the warning signs on the gooseneck and on the ramps on the left and right, including socket -Control valves for the ramps fitted on the right-hand side of the trailer -European reflector signs (red/yellow) at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -An electric cable winch with radio remote control approx. 5,400 kg lifting force, including 9.5 mm thick wire rope 24 m long with rope guide roller -Screwed 5to ring for reeving the cable winch cable on the neck without deflection pulley -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition -7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) -1 pair of recessed lashing rings along the central beam at the rear of the bevel (LC 10,000 daN) -A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm -Speed sticker 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 10,900 kg, maximum load weight: 37,100 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,600 mm, loading space width: 2,540 mm, loading space height: 890 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, operation weight: 10,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 6° -Technical fifth wheel load: 18,000 kg -For tractor units: 4 x 2 and 6 x 2 Hjdpfx Aeuadk Nsaaonk Loading area: -Loading area, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6° -Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg -Grating and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area Ramps: -A pair of two-part AXS steel ramps with a length of approx. 4,675 mm and a width of approx. 900 mm -Grating floor -Hydraulically hinged ramp tips -Ramps can be moved hydraulically by approx. 235 mm outwards and approx. 365 mm inwards -Painted sand coating on the outer frame of the ramp and on the ramp tip -Flashlights on the outside of the ramp tips with switch next to the ramp controls -Ramp secured in driving position using a quick release Axles, suspension and tires: -BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle with self-steering -1st Axle with traction aid -Operation via the brake pedal in the tractor unit -Technical axle load: 12,000 kg -Air suspension with lifting and lowering valve -235/75 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 -TPMS tire pressure monitoring sensors mounted in all wheels including spare wheels Braking system: -WABCO EBS-E brand braking system in accordance with EU regulations Paintwork: -Semi-trailer MB 7350 Nova gray Accessories included: -Bulkhead made of steel, plug-in, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -JOST module B - static test load = 50,000 kg -Continuous grating with 5 mm sheet metal underlay as additional reinforcement -Painted sand coating -Cutouts in the outer frame of the loading area and the lifting bed for hanging control valves for the hydraulic ramps on the right of the vehicle -2" kingpin -Central lubrication system with 1 pump, brand BEKAMAX -On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized -Electric cable winch, approx. 5,400 kg pulling force, with radio remote control -Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller -WABCO Smart Board System -4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: new, empty load weight: 15,450 kg, maximum load weight: 65,550 kg, overall weight: 80,000 kg, axle configuration: > 3 axles, loading space length: 21,900 mm, loading space width: 2,540 mm, loading space height: 925 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4 Loading area: Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support. Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length. Axles and tires: BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Manufacture of our choice Sockets and lighting: 24-volt lighting system Design in accordance with EU regulations Hsdpferigw Rex Aaaonk ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallization Complete steel construction shot blasted, then hot-finished with ZINACOR 850 Paint: 6-K final treatment: Complete steel construction shot blasted after welding 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax Accessories: Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide 2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle 1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2 Removable protection around the central lubrication pump(s) Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member Manual and description One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.

Condition: new, maximum load weight: 38,100 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 13,100 mm, loading space width: 2,480 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5 3PMSF, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading area: 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: JOST seat posts with 2-speed gearbox for 24 t lifting capacity Axles and tires: BPW axles, two axles rigid two axles self-steering, air-sprung, with drum brake, with raise/lower function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 205/65 R17.5 3PMSF Brake system: WABCO brake system in accordance with EU regulations with EBS-E Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component Top coat single color in MB 7350 nova grey No metallic paint finish possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 Yellow-red air couplings on the galvanized connection strip at the front 4 brake shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights Galvanized folding supports under the bevel of the cargo bed A holder for a rotating beacon at the rear of the trailer Height-adjustable tarpaulin body Galvanized bulkhead with a tensioning mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof can be moved forwards on ALU roof rail profiles bolted to the front and rear wall 3 pairs of sliding stanchions in the loading area The body can be hydraulically widened at the rear to the left and right by approx. 750 mm Sliding roof with pivoting portal support Sliding tarpaulin with 700 mm reserve in length, with tension belts at approx. 600 mm intervals Height top edge of body approx. 3,960 mm Driving with the sliding tarpaulin open is not permitted and will damage the tarpaulin Suspension strip for ALU docking lights at the rear of the vehicle A holder for the warning signs including socket on the gooseneck and on the rear panel on the left and right respectively A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Hodpfx Ajtphtmjaaenk Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load condition Rear body closed with ALU hinged doors A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping BEKAMAX central lubrication system with NLGI-2 standard grease and removable protection around the pump Speed sticker 80 km/h at the rear and on both sides Load manometer to determine the axle loads including load diagram