Used drilling equipment - vertical for sale (33)

Condition: used, Year of construction: 2015, Please provide reference number upon request: 21725 Specifications: 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Boom 1: Pedoxu A Hmspfx Adhsgt Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: Boomer MC2 Tunnelborerigg. = More information = Serial number: TMG15URExxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, operating hours: 810 h, Horizontal HDD drilling rig, one of the most powerful drilling rigs in the 4-ton class, powered by a 4-cylinder HATZ diesel engine, drilling force of 41.5 kN, pull force of 41.5 kN, 26 pieces of drill rods, length approximately 2000 mm, laying radius of 30 m, hydraulic anchoring, high-pressure pump from FCM, type: E0413 HD, 95 liters, diameter of pilot bores 60-110 mm, the vehicle can be covered with advertising and/or labeled. SI86462 Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Pgsdpfx Adev N Suajhst Please contact us!

Condition: used, power: 74 kW (100.61 HP), Year of construction: 1991, Engine brand: Liebherr Please contact J.A.J. Jansen for further information. Podpfx Asxvn Edjdhogt

Condition: used, Year of construction: 2013, Please provide reference number upon request: 23778 Specifications: 2013 model Engine hours: 2,150 Weight: 35,000 kg 2 x 90 kwa pumps Water pump is hydraulic 2 booms 2238 HD hammers 690 volts AC/climate Radio Rear camera Ready for delivery   Boom 1: Psdpfx Aozf U Iqedhegt Percussion hours: approx. 90 Electric motor hours: approx. 425 Compressor hours: approx. 255   Boom 2: Percussion hours: approx. 82 Electric motor hours: approx. 385 Compressor hours: approx. 255 Telescopic feeder Ready for delivery   Description: 2013 Boomer E2-C22 tunnel rig. The hammers are 2238 HD. The rig was last used in April and wear parts on the rig have been replaced as well as new oil on the compressor. The owner says that it shouldn't be when the lights on it are on, it might be a little yellow, but he thinks the rig hasn't been navigated yet. Boom 2 has a telescopic feeder on it. There are no profiles on the rig. Watch video. Ready for delivery Own weight: 35000 Engine hours: 2150 Model: E2-C22 = More information = Serial number: 8999 120xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 23059 Pjdpfx Aey Evuujdhjgt Specifications: 2019 model Operating hours: 5090 Impact hours: 1330 Total bore depth: 122862 m HL650 hammer (18 kW) GPS Central lubrication Diesel heater Water mist Remote control Winch Safety cage Undercarriage oscillation Chassis (see pictures) Service history Vacuum cleaner Compressor Ready for delivery Description: We have a 2019 Sandvik DX600R drill rig with HL650 hammer, GPS, and water mist for sale. The rig has been closely monitored for service and maintenance by the owner. Everything functions as it should and appears to be in good condition. It also has low impact hours relative to operating hours. Ready for delivery. Own weight: 1 Engine hours: 5090 Model: DX600R borerigg m/HL650 hammer, gps og wather mist = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: new, Year of construction: 2026, Mobile Suction System 0.5 - 14 m³ Suction Tank / Vacuum System - Mounted on subframe DIN 30722 - Steel tank with a capacity of 500 – 14,000 liters - Tank and subframe hot-dip galvanized - Continuous angle frame fully welded along entire length - Designed for max. 0.5 bar pressure - Designed for max. 1.0 bar vacuum - 2 liquid separators - Safety system including manhole cover and control valve - Safety manhole with over-suction valve - Mechanical fill level indicator with scale - 2 internal baffle plates reinforced with T-bar - Suction connection at rear bottom: 4" x Ø 108 mm Perrot coupling - Suction connection on left: 4" x Ø 108 mm Perrot coupling - Lockable storage boxes on left and right sides for hoses and tools - Engine unit installed at the front, between tank and cable hook Compressor (depending on version and requirement, e.g. MECII 9000 Ballast System): - Vacuum compressor with injection air cooling - Heat-resistant vanes - Crash protection system - Maximum output: 9,000 liters/minute - Max. pressure: 0.5 bar - Max. vacuum: -0.95 bar - Continuous operation permissible at -0.6 bar - Automatic lubrication - Lubricant reservoir: 2.5 liters - Lubrication oil fill level indicator Engine: - Briggs & Stratton Vanguard - 31 HP / 23.1 kW - V-twin engine, 4-stroke - OHV valve control - Electric start - 12-volt battery Pgjdpfxol I I Rpj Adhet - V-belt drive with protective cover - Fully mounted on console - Enclosure for theft protection High-Pressure Cleaner: - Working pressure: 30-150 bar - Cleaning capacity: 13 l/min - Features genuine Honda engine - Automatic high-pressure hose reel - 15m high-pressure hose DN08 - Cleaning lance - Dirt blaster - 2 plastic tanks, each 500 liters For technical specifications and further information, please contact us. Worldwide delivery, dealer inquiries welcome. - Custom designs and special equipment available on request. Please contact us - Images are for illustration purposes only. For current images, please contact us at: 02723 717 61-0 or by email: anfrage(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details, such as your phone number or email address.

Condition: used, Year of construction: 1999, Please contact J.A.J. Jansen for further information. Pjdpfouufrfex Adhjgt

Condition: new, fuel tank capacity: 1,500 l, Year of construction: 2026, ALTRO-Tec GmbH provides the right vacuum suction system for every application! M-VAC 1500 l / 1.5 m³ - 1.5 m³ hot-dip galvanized tank - Fully galvanized 2.7 t chassis - Lid for barrel opening - Tank can be emptied by switching the compressor - Small, maneuverable vehicle—ideal for urban areas, parking garages, etc. - Suitable accessories available for various applications - Suction depths up to 6 meters possible Pgsdpfxou Iawws Adhjt - 3600 liters air flow rate - Various drive types: petrol, diesel, electric Application examples: - Extraction of highly sandy drilling slurry in specialist foundation engineering - Extraction of liquids, including those containing solids - Cleaning of channels, shafts, pits - Emptying of portable toilets and shafts - Suction of lyes, emulsions, and wastewater - Wide range of accessories—custom paint finish available (optional) At ALTRO-Tec GmbH, you get everything from a single source: - On-site demonstration and operator training - Repairs and maintenance—fast spare parts supply - Assistance in case of technical issues - All types of superstructures: Multi Car, hook lift system, and much more! - Customized builds / special filters—rental equipment and trade-in options Delivery worldwide For technical data and further information, please contact us. *Custom builds and special equipment* available on request, please contact us. Delivery times and availability upon agreement. Images are sample images; for current images, please contact us at: 02723 717 61-0 or by e-mail: anfrage(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details such as your phone number or e-mail address.