Condition: used, Year of construction: 2020, Cultivator - soil tillage machine - seedbed preparation machine - KÖCKERLING ALLROUNDER 900 AS NEW - approx. 200 ha in use Vehicle identification number: 314801 Own weight: 6,900 kg Working width 9,000 mm 4-bar cultivator Harrow Armored goosefoot share Dohx D Ugetxd U Isrjkl Compressed air Double STS level board hydraulic Tires: 500/55-20 - 70%

Condition: used, power: 17 kW (23.11 HP), Equipment: all wheel drive, cabin, front linkage, Your authorized ISEKI ? Specialized dealer with competence, service and advice offers you : Municipal tractor ISEKI TXGS 24 all-wheel drive with snow blade and round spreader IMMEDIATELY AVAILABLE ! Equipment: - 3 cylinder diesel engine with 27 HP - Stepless hydrostatic drive with 2-stage countershaft unit - Speed 0 - 15 km/h - Differential lock effective on rear axle - All-wheel drive can be engaged and disengaged separately - Rear PTO with 540 rpm Dehx D Ugjwhhc Aerskl - Intermediate axle PTO with 2,000 rpm - PTO shafts can be switched under load - Disc brake in oil bath effective on the rear axle - Fully hydraulic steering - Rear power lift cat. 1 incl. top link - Front power lift with quick coupler cat. 0 - Hydraulic connections 2 x rear and 2x front - Turf tires front 18 x 8.50 - 8 and rear 26 x 12.00 -12 Safety cab: Consisting of CE-approved safety frame, 4-sided safety glazing and sun protection tinting, opening doors with wide entrance, floor assembly with non-slip rubber coating, integrated underfloor heating, windshield wiper, 2 large exterior mirrors, sun protection roller blind, coat hooks, front and rear window can be opened via gas pressure dampers, hot water heating with 2-stage fan and adjustable air nozzles, preparation for rear window heating Comfort interior with sound-absorbing trim, radio preparation Windshield washer system for the windshield Comfort seat adjustable to driver's weight LED auxiliary headlights Rear left LED work light LED rotating beacon including accessories: ISEKI RSM 130 snow blade - Working width from 1,100 mm ? 1,300 mm - Hydraulic lateral adjustment - Vulkolan blade, height-adjustable skids - Overload protection through folding function of the blade SP150ES stainless steel centrifugal broadcaster - Attachment via rear pivot point - 160 liter stainless steel hopper - Spreading bucket, spreading apron and quantity metering device made of stainless steel - incl. PTO shaft, filling sieve, agitator fingers, tarpaulin * Errors, changes and prior sale reserved. Our general terms and conditions apply. * All information without guarantee * The vehicle description serves only for the general identification of the vehicle / object and does not constitute a warranty or assurance in the sense of sales law. * The information does not claim to be correct or complete * Please check the information relevant to you with the seller before purchasing Over 25 years of experience in the sale and servicing of commercial vehicles guarantee competent advice and implementation of your equipment requirements. Let us make you an individual offer. You can also take advantage of our leasing and financing options. Further commercial vehicle offers from the manufacturers ISUZU and MULTICAR as well as various attachments can be found at Tel:

Condition: used, Year of construction: 2014, operating hours: 9,290 h, power: 206 kW (280.08 HP), Equipment: air conditioning, all wheel drive, compressed air brake, front-end loader, onboard computer, Used AGCO/Fendt all-wheel-drive tractor Cabin, climate control, ventilation, heating, Evolution air seat, roof hatch, Profi Plus/10.4" terminal, front/rear work lights, rotating beacon, Djhx D Uevyvcisgrjkl protected front axle, protected cabin, 2-wire air brake system, 1x double-acting control valve at the front 4x double-acting control valves at the rear Load sensing, 193 l/min, electronic control (EHR) Trailer hitch with 38 mm bolts Tires: 600/70 R 30, 710/70 R 42 Alö/Quicke Q88 front loader Multi-coupler Euro-SWR with hydraulic locking Alö electro-hydraulic joystick Scale with monitor

Condition: used, Year of construction: 2010, _____6,500 operating hours, with Epsilon crane M70, storage location: customer Dkehx D Ugov Dqifsrol

Condition: new, Year of construction: 2023, JUWEL 8 M V X 5 L 100 Lemken 5-shaft plow Dohsv Hubdox D Ugrokl in standard equipment with the following additional equipment: universal support wheel 340/55-16 damped body shape CS50 shares 2SP + SB45D / SB56D system A42 protection plate for support wheel fertilizer inserter MS2 - S245 1 pair of system coulters hydraulic frame swiveling preparation for packer driver arm frame height 80cm cutting width 30cm - 55cm lower link connection L3 Z3 (cat 3) top link linkage cat 3 ---stock device at a special price ---

Condition: used, Year of construction: 2008, operating hours: 9,608 h, power: 142 kW (193.07 HP), maximum speed: 50 km/h, first registration: 04/2008, front tire size: 600/65/28, rear tire size: 650/75/38, empty load weight: 10,500 kg, maximum load weight: 16,000 kg, Equipment: air conditioning, all wheel drive, cabin, compressed air brake, onboard computer, power assisted steering, Viewing by appointment only - John Deere 7430 P - Year of manufacture 2008 - Operating hours 9608 - ISO Bus - Rear 4-axle control unit - Front unpressurized return - Front linkage - Front PTO 1000 - Rear PTO 540E 540 1000E 1000 - 8 front work lights - 4 rear work lights - Pre-equipped for steering system - Compressed air system - Front tires 600/65/28 with 80% - Rear tires 650/75/38 with 85% - Load sensing - Electronically controlled electronic control (EHR) - All-wheel drive - 40 km/h approved, 50 km/h possible Subject to prior sale, errors and typos excepted Dshx Djv T Scle Ugrokl

Condition: new, Year of construction: 2025, Jansen mower AGF-220 Slope mulcher * Mulcher * Slope mower * Slope mower * Mowing width: 2180 mm * Weight: 915 kg * Blade type: 1.2 kg hammer flail * Tilt angle: +90° to -55° * PTO shaft: included in delivery * RPM: 540 * Flail shaft Ø: 170 mm * Follower roller Ø: 170 mm * Wall thickness: 4-15 mm (depending on position on the device) * Mount: three-point hitch from cat. II * Drive: 5 toothed belts * hydraulically foldable 180 degrees * Tractor: min. 90 HP * Packaging dimensions: 2850mm x 1120mm x 980mm ATTENTION !!!!! READ THIS ESSENTIALLY !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Dehx D Usnm Aq Hjgrokl Tel.: Fax:

Condition: used, Year of construction: 2001, working width: 1,800 mm, branded TUCHEL sweeper Working width: 1.80 m hydr. drive hydr. folding hydr. collecting trough Tine holder for pallet fork Third support wheel Sweeping brush with wire trim Dohx D Ugswgy T Rjrskl 560 mm

Condition: new, Year of construction: 2025, DALBO Powerroll 1230 New machine, built in 2025 12.30 m working width Dkshewanzpex D Ugrsl 8,120 kg net weight SNOWFLAKE rings with a diameter of 55 cm Air brake Hydraulic folding Lower linkage attachment | Internal No.: 11280562

Condition: used, Year of construction: 1990, operating hours: 3,120 h, power: 221 kW (300.48 HP), fuel type: diesel, front tire size: 28.1R26 | 50%, rear tire size: 28.1R26 | 50%, tire size: 28.1R26, tire condition: 50 %, Equipment: additional headlights, all wheel drive, cabin, compressed air brake, power shift gear, Tires (front): 28.1R26, Tires (rear): 28.1R26, Operating hours: 3120, Number of engine cylinders: 12, Control unit - double-acting (1x), Three-point / rear linkage, Rotating beacon, Articulated steering, Mechanical top link (rear) _____ Completely repaired as a GENERAL REPAIR Engine + transmission + articulated joint etc. checked Electrics, new batteries, new paint scheme Rear hydraulics 12-cylinder engine Square bracket Immediately available Retrofitting PTO (one available) +5,000 € net Retrofitting PTO (one available) +5,000 € net Storage location: 17094 Pragsdorf Dkohxov Ngawj D Ugrel

Condition: new, Year of construction: 2022, 600/65 R 38 Set of Trelleborg wheels (2 sets) with fixed rim suitable for Claas tractor Arion 470 Dkohjudp D Nex D Ugrsl 600/65R38+480/65R28 Trelleborg

Condition: used, Year of construction: 2017, operating hours: 5,900 h, power: 320 kW (435.08 HP), maximum speed: 40 km/h, first registration: 08/2017, front tire size: 710/60/38, rear tire size: 900/65/46, empty load weight: 13,000 kg, maximum load weight: 18,000 kg, Equipment: air conditioning, all wheel drive, cabin, compressed air brake, onboard computer, power assisted steering, power shift gear, Viewing by appointment only - Model 8400R - Front tires 710/60/38 with 20% load capacity - Rear tires 900/65/46 with 60% load capacity - 10 LED front work lights - 8 LED rear work lights - 5 ton Cat. 3 front linkage - Cat. 4 rear linkage - K80 - Tow bar - Compressed air system - 5DW control unit 1 for front linkage - Wheel weight 2x 625 kg - 1000/1000E PTO with PTO limiter - AdBlue (AdBlue) - E23 powershift/stepless transmission - Radio Djhx D Ujwg Il Ujgrekl - Steering system - Cab raised to accommodate 46-inch rear wheels - Active suspension seat - Suspended front axle - 6040 operating hours (tractor in use) - Warning signs Subject to prior sale, errors and typos excepted

Condition: new, Year of construction: 2025, Jansen AS-600 Branch saw Branch shears Year of manufacture 2025 for wheel loaders, telescopic loaders or on tractor front loaders Branches up to 200 mm thick Smooth running Very clean cutting pattern 3 specially hardened saw blades (each with 80 teeth) Diameter of 600 mm Weight of approx. 14 kg each Working width of approx. 1750 mm Dkehx Dsvt Naze Ugrel Hydraulic and V-belt driven Boom can be extended approx. 1000 mm to the side Side-mounted counterweight (approx. 265 kg) Incl. hydraulic hoses Required hydraulic connections on the carrier vehicle: 3x double-acting Mounting: Euro front loader mounting Saw blades: 3 pcs. Saw blade drive: V-belt Saw blade diameter: 600 mm Saw blade thickness: 5 mm Saw teeth: 80 per saw blade Effective cutting width: 1,750 mm Branch thickness (max.): 200 mm Side extension: 1,000 mm Operating speed: 2 -13 km/h Hydraulic connections: 3x double-acting Hydraulic hoses: 6 x 9 m each Oil pressure: 160-210 bar Hydraulic flow rate: min. 45 l/min Weight: approx. 790 kg Weight with packaging: approx. 830 kg Packaging dimensions: 2280 x 930 x 1170 mm Scope of delivery: bearing blocks, saw blade guard and hydraulic hose set (6 x 9 m each) ATTENTION !!!!! READ THIS ESSENTIALLY !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and testing the item so that the buyer does not have any false impressions about the condition and suitability. Viewings and testing are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, Year of construction: 2003, working width: 3,000 mm, Used Amazone disc harrow Three-point rear attachment, Wedge ring roller, 3 m working width, Mechanical working depth adjustment Djhx Dowgy Twj Ugrskl

Condition: used, Year of construction: 2018, operating hours: 1,776 h, Equipment: air conditioning, 8600 I John Deere Forage Harvester Front tires: 900/60 R42 Dksheqi N Shsx D Ugrol Rear tires: 710/60 R30 Air conditioning

Condition: new, Year of construction: 2022, working width: 600 mm, Corn header_____Autopilot, Auto Contour,Storage location:Customer Dohswhc Hpsx D Ugrjkl

Condition: used, Year of construction: 2015, working width: 7,400 mm, LINER 2700 Used Claas Liner 2700 twin-rotor rake Standard equipment, built in 2015 2 rotor bodies with 12 tine arms each PROFIX tine arm lock 4 double spring tines per arm Fully cardanic rotor guidance Actively steered transport chassis up to 50 km/h Tires: 10.0/75-15.3 10PR Rotor chassis with super balloon tires: 16x6.50-8 10PR Working width: 6.80 m - 7.40 m Swath width: 1.20 m - 2.00 m Single wide-angle PTO shaft with freewheel and overload protection 540 rpm Dohx Dowg Snme Ugrskl

Condition: used, Year of construction: 2012, working width: 6,000 mm, Used Köckerling meadow harrow Dohx D Ugowgy T Dorskl Three-point linkage, hydraulic folding, lighting system, warning signs

Condition: used, Year of construction: 2019, Equipment: compressed air brake, EVO 280 Dkshswgy S Hjx D Ugrsl Gimme Potato Harvester K80 Ball Hitch 6-tooth PTO drive shaft 540 rpm PTO drive Direct drive Row width 75 cm, Pick-up width: 580 mm, Diaphragm drums: 390 mm diameter 2-blade share Separately adjustable center share - extra TerraTronic Automatic ridge centering 4 coulter discs 2 haulm deflector skids Sieve channel width 1500 mm 1st sieve web pitch 40 mm 1st sieve web with lock connection Pitch-independent Friction drive for the first screening belt with support roller 1st screening belt speed - fast V2A plates in the oscillating frame Oscillating agitator in the first screening belt with speed adjustment 2nd screening belt pitch 35 mm with lock connection Pitch-independent friction drive for the second screening belt VarioDrive: continuously variable drive for the first and second screening belts Speedtronic-Web: forward speed and load-dependent screening belt control Coarse haulm belt spacing 280 mm Stripper shaft adjustment from the terminal 1 haulm stripper shaft under the coarse haulm belt, hydraulic. Driven Oil cooler for the company's own hydraulics Belt of the first separator, pitch 40 mm V-profile hedgehog bar of the first separator Smooth roller scraper on the first separator Tilt adjustment of the first and second separators from the terminal Height adjustment of the scraper roller of the first separator from the terminal Cleaning device in the hedgehog belt of the first separator Angle adjustment of the scraper roller of the first separator from the terminal Slippage monitoring of the first separator and the second screening belt Trash removal belt behind the first separator 2nd separator: hedgehog belt with bars Belt of the second separator, pitch 40 mm V-profile hedgehog bar of the second separator Smooth roller scraper of the second separator Speed adjustment for 2 brush or finger belts Automatic tilt adjustment of the first and second separators Speed adjustment of the first and second separators Angle adjustment of the scraper roller of the second Separator 3rd Separator: Hedgehog belt with bars - pitch: 40 mm H-profile hedgehog bar for 3rd Separator Height adjustment of the finger belt, right and left Height adjustment of the scraper rollers for the 2nd Separator Mechanical height adjustment of the scraper roller for the 3rd Separator Bunker belt with cloth Automatic bunker filling including automatic control for the front elevator and Filling optimization Bunker head lowering Air brake Automatic axle centering and automatic tilt control Tires: 850/50 R30.5 ISOBUS control terminal CCI 1200 Touchscreen terminal GBX 860 control box ISOBUS MemoryControl Camera system

Condition: used, Year of construction: 2021, operating hours: 2,740 h, power: 301 kW (409.25 HP), maximum speed: 40 km/h, front tire size: Kette, rear tire size: Kette, tire size: Kette, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, onboard computer, power shift gear, Tires (front): Chain, Tires (rear): Chain, Operating hours: 2740, First registered: 2021, Three-point / rear linkage, Electronic hitch control (EHR), Hydraulic steering, Performance monitor, Air-suspended seat, Radio, Rotating beacon, Control unit - double-acting (6x), GPS system (receiver), ISOBUS, Automatic tow bar, Height-adjustable hitch, Three-point external control element, Hydraulic control unit external control, Rear PTO external control, Cab suspension (hydraulic), Automatic steering system_____AHK, EHR, LoadSensing, 6dw, Air brake, Radio, Air conditioning, e23 transmission,,Storage location: Customer Dkehovxnqcex D Ugrol

Condition: new, Year of construction: 2024, GRASSMASTER 600 Köckerling Grasmaster 600 overseeding harrow Standard equipment Additional equipment: Leveling board Dkshx Djv Ir Ecs Ugrel Mounting frame with seeding unit Seeding stop Lighting

Condition: used, Year of construction: 2022, working width: 3,000 mm, Equipment: onboard computer, Amazone Mounted Seed Drill Mounted Seed Drill D9 3000 Special Seed Hopper Extension 400 Lighting for Road Travel for D9 and AD 25 RoTeC Coulters for D9 3000 Mechanical Coulter Pressure Adjustment Depth Control Roller Control 25 for the short RoTeC coulter Depth Control Roller Control 25 for the long RoTeC coulter Exact Following Harrow 3000 Dkohx D Ugjwgy Tqjrel Rigid Mounting Kit Exact Following Harrow and Drag Tine Following Harrow Bout Marker D9 3000 Super with Hydraulic Folding AmaLog+ Control Computer Countershaft AmaLog+ Wiring Harness for D9/AD Console with Battery Connection Cable with a 3-Pin 12V Socket Tramline Control Monitoring for D9/AD used Niemeyer Rotary Harrow Year of Manufacture: 2010 TYPE: KR 3012 W (540) WORKING WIDTH: 0.0300 Three-point hitch, PTO shaft, 540 rpm input gear, side plates, packer roller, hydraulic piggyback, warning signs

Condition: new, Year of construction: 2023, EC-RIDGER 5 LEMKEN Hoe Standard equipment, additionally with: 1x 3200 mm profile frame 1x LED front lighting system with indicator 2x complete support wheels, profile frame Tire size: 500-8, 6-ply 4x 355 mm diameter hoeing discs, ball bearing mounted, with angle adjustment Dohx D Ugswgy Syorjkl 5x 20 cm hoeing knives 4x holders for adjustable discs and protractor on the ridge 8x adjustable cutting discs (220 mm diameter) 8x 30x10 mm handles for protractor 4x protractor right (15 cm) 4x protractor left (15 cm) Stock machine with paint damage

Condition: used, AUTOWRAP 1300 SM Dehx Dev Hif Rs Ugrskl used Tanco bale wrapper Autowrap 1300 SM in standard equipment 750mm film

Condition: used, Year of construction: 2022, Used Greentec multi-carrier with pruning saw as standard Dkjhx D Uswgy Tksgrsl Left-hand extension 2500 mm horizontal reach 2200 mm transport width 45° collision protection (AHS control) 110° head angle adjustment 1500 mm hose set Hydraulic requirements: 50 l/min @ 180 bar Weight: 200 kg Hydraulic system included Head angle adjustment HXF 3302 Adapter HXF 3302 / Claas telehandler Greentec LRS 2002 branch saw Left-hand extension 2000 mm working width For branches up to 160 mm in diameter 4 WIDIA saw blades (50 cm in diameter) 5.0 km/h top speed Neutral intake (without attachment adapter) Hydraulic requirements: 50 l/min @ 180 bar 1x pressure connection 1x pressure-free return line (sufficient cross-section) 1x leakage oil line to the tank (to prevent engine damage) Weight: 198 kg Attachment adapter for multi-carrier HXF 3302/LRS 2002-2402