Used intercultivation & maintenance equipment for sale (61)

Condition: used, Year of construction: 2023, FS 600 KF 010 used Saphir FineStar FS 600 KF Fpjdpfx Akozr Snnobjk

Condition: used, Year of construction: 2024, EC-WEEDER 5 Lemken hoe In standard configuration, additionally equipped with: 2x support wheels 511x239 mm with perforated rim and wheel yoke Profile frame 3200 mm Three-point tower for profile frame Frame 100x100 mm - 2200 mm 2x profile frames for profile tube - 2200 mm 2x supports (for EC-Weeder, EC-Ridger or EC-Spray) LED lighting system front and rear 5x combi elements for profile frame Long tool holder (for 5 blades) 8x sliding elements L 13x Vibro holders 12 mm for tine 30x10 mm 4 pairs of protective discs (D=500 mm) with mount Minimum row spacing 45 cm 13x hoe blades 26 cm Fedpfx Akszigamebopk 4x carriers for finger weeders with double spring 4 pairs of sliding sections for frame height 75 cm 4 pairs of finger weeders (D=400 mm)

Condition: new, Year of construction: 2025, VP 280 (0010) DRAGONE flail mower VP series (0020) Type: VP 280 (0030) Working width: mm Fpsdozq Ig Rspfx Akbsk (0040) Overall width: mm (0050) 30 hammer flails (0060) Front/rear mounting (0070) Three-point linkage CAT II (0080) Gearbox 1000 rpm (0090) FRONT-REAR gearbox, right-hand rotation in direction of travel (clockwise) (0100) Standard gearbox position (offset to the left) (0110) Side shift to the right (600 mm) (0120) Mulcher housing made of S700 high-quality steel (0130) Weight: 1,195.00 kg (0140) WALTERSCHEID PTO shaft VP

Condition: used, Year of construction: 1993, BNG 270 (0010) Kuhn mulcher Fpjdpozq Igqefx Akbek (0020) with a defective gearbox!

Condition: used, working width: 2,500 mm, MU-L/S 220 (0010) Rear and side mulcher (0020) Incl. overrun protection (0030) PTO shaft, both sides (0031) Wear plate Fodpfx Akszgyuxebspk (0050) Inside the mulching unit

Condition: new, Year of construction: 2022, CHOPSTAR EMS 4-ROW (0010) Einböck cultivator (0020) in standard configuration (0030) CHOPSTAR 5-90 EMS 4-row cultivator (0040) Rear-mounted, hydraulically foldable (0050) Wider frame profile per cm for (0060) different row spacing than specified above (0070) Flange in reinforced design to allow (0080) expansion to 8 rows (0090) Vibro spring 32x12 with shank 30x10 and (0100) goosefoot share (0110) Toothed protective discs Fpsdpfx Aksu Tx D Rsbsk (0120) Pneumatic tire 13x6.50 (0130) Hilling shares to vibro knife tine (0140) 1 following harrow, height-adjustable, (0150) mounted behind the cultivator body (0160) Lateral tines, infinitely adjustable (0170) Warning signs with bracket and (0180) rear-facing LED lighting

Condition: used, Year of construction: 2023, working width: 6,000 mm, -AUCTION MACHINE- ab-auction ORIGINAL CULTIVATOR 6.00 M Hatzenbichler Original Cultivator Working width 6m with central tube frame hydraulically foldable height-adjustable, ball-bearing supported support wheels field tines tine thickness 7mm, tine length 450mm protected spring coil (prevents damage to plant tips) central adjustment of the tines (10-hole adjustment) movable cultivator field (best soil adaptation) transport locking – using a shut-off valve no rigidly locked side arms (best soil adaptation) soil-adapting base frame with additional pressure from the pressure accumulator tine spacing 2.5cm transport width 3m !!! unassembled !!! You can bid on this machine online. The starting price is 990.00 EUR excl. VAT. Register for free and start bidding. Click here to go to the auction: ----- ----- Fjdpoui Unxsfx Akbepk Exciting Online Auction! Start bidding NOW! ab-auction

Condition: used, MULCHER Used Pomarol side mulcher Z028 Standard equipment, manufactured in 2015 Working width 1.45m Hydraulic folding Rear-mounted PTO shaft 540 rpm PTO shaft Operating hours approximately 5 hectares Fpedpfx Akjzqpwkebek Used goods – special regulations apply. The sale is in accordance with §25a UStG (German VAT Act) – differential taxation. VAT cannot be shown separately.

Condition: used, Year of construction: 2022, TIFERMEC GEO VISION 650 Fpsdpfxsy E Ar Ho Akbsk Tifermec embankment mower GEO VISION 650 P in basic configuration 6500 mm horizontal reach 6350 mm vertical reach 2450 mm forward reach of the boom 155° hydraulic arm swing (collision protection) 180° head angle adjustment Control-Pro, joystick control Lighting, independent hydraulics, rear mounting Cat.2 Tifermec mulching head T-130 P (CS-MS) SN T12085 Working width 1300 mm, 48 CS flails Oil cooler, Walterscheid PTO shaft

Condition: new, Year of construction: 2025, Road V 240 Fjdjzqp N Tspfx Akbspk 0010 0011 DRAGONE ROAD V240 - Rear-mounted - CAT II - 0012 540 RPM - clockwise rotation - gearbox on the outside - 0013 Housing S700 0014 DRAGONE rear and side mulcher, ROAD V series 0015 Type: ROAD V 240, 2400 mm working width, 2850 mm 0016 Overall width 1350 mm, side shift 26 0017 Hammer flail, rear-mounted, three-point linkage CAT 0018 II, gearbox 540 RPM, gearbox on the drive side 0019 clockwise (clockwise rotation), external gearbox (standard) 0020 Mulching housing made of S700 quality steel 0021 0022 0023 WALTERSCHEID wide-angle universal joint, ROAD = 0024 high processing quality + low maintenance effort = 0025 double-sided wide-angle joint (recommended for vertical 0026 operation) = long, heavy-duty design with star profile

Condition: used, Year of construction: 2023, USM 15 VR4 Used Dücker mulcher, model USM 15 Working width: approx. 1.50 m Hydraulic folding mechanism PTO shaft with freewheel Hydraulic side shift, 0.60 m Freely swinging hammer blades Guide roller Fodpfjyp Urlsx Akbopk

Condition: used, Year of construction: 2019, working width: 2,400 mm, COBRA 240 Used Dragone mulcher Standard equipment Exceptionally large swivel range (2,200 mm) Three-dimensional impact protection Fjdeyvlzxspfx Akbspk Construction made of STRENX S700 Walterscheid PTO shaft

Condition: used, Year of construction: 2023, working width: 6,000 mm, TRANSFORMER 6 VF Horsch cultivator including foldable frame with clamping profile 3 m transport width lighting adjustment unit 13 cultivating elements with lifting cylinder row spacing 50 cm guide wheels with 2.00 m track width 37 EdgeOn tines 37 x 150 mm EdgeOn hard metal share version conversion kit from 13 to 9 Fodpfx Aoyfi Aqskbjpk Claas Culticam camera guidance system with one camera lighting kit for camera Claas Cam RowLift, electrical and hydraulic preparation for SectionControl 12x crop protection discs, 1x left + 1x right Terminal Touch 800 ISOBUS first-time use supplier's freight

Condition: used, Year of construction: 2020, Equipment: cabin, HOEING MACHINE 4-ROW. (0010) Dulks ABRAH Weed Hoeing Machine (0020) Standard factory equipment (0030) Rear tools powered hydraulically. (0040) Continuously adjustable rotation speed. Fedpfx Akoy Dwflebopk (0050) Central height adjustment via parallelogram linkage (0060) including load or relief by spring. (0070) Hydraulic system including central control block (0080) and complete hosing supplied. (0090) Tractor requirements: min. 30 l/min, max. 70 l/min, max. 210 bar, min. 170 bar. Connection via a single control unit. (0120) Maximum tool width 24 cm. (0130) Tools: curved tines 2 cm and rotary shares (0140) Mounting position: rear mounted (0150) Frame: square tube (0160) Number of rows: double row (0170) Row spacing: 7 cm (0180) Ridge spacing: 75 cm (0190) Row width: 4 cm (0200) Frame height in working position, measured from the top of the ridge to the lower frame edge: 48 cm Frame with electrohydraulic steering. The steering (0240) of the disc coulters/support wheels is controlled by a hydraulic cylinder (0250), which can be operated from the cab via joystick (0260). (0270) Additional function in the same hydraulic circuit as the drive and hoe relief. (0290) No additional control unit required. (0300) Track width matches that of the tractor. (0310) Components: main frame, double-acting hydraulic cylinder, wiring, and electrical and hydraulic connections.

Condition: used, FML/DT-200 (0010) FAE Forestry Mulcher Series FML/DT - 225 (0020) Machine in standard configuration (0030) Serial number: 22, year of manufacture: 2022 (0050) Weight: approx. 1595 kg Fpedpjx Uudyjfx Akbok

Condition: new, Year of construction: 2026, working width: 2,800 mm, VP 280 SH DRAGONE flail mower 2800 mm working width 2960 mm overall width 30 hammer flails Rear mount Three-point hitch, CAT II Fpedpfjzlu Uwjx Akbsk Gearbox 1000 rpm Gearbox rotates clockwise when viewed from the direction of travel Standard gearbox position (offset to the left) Lateral shift to the right (600 mm) Mulching housing made of S700 quality steel Weight: 1,195.00 kg WALTERSCHEID universal joint VP Heavy-duty version with star profile (one side 1 3/4 inches / other side 1 3/8 inches)

Condition: used, Year of construction: 2022, Spring-tine harrow Hatzenbichler Fjdpfx Aozmbllskbepk (01) 12 m (02) Hydraulic tine adjustment

Condition: used, Year of construction: 2023, working width: 9,150 mm, CURA 9 ST Horsch Striegel Cura 9 ST Foldable, 3-section frame 3-point linkage 6-row tine harrow Beam spacing: 200 mm Row spacing: 28 mm Frame height: 450 mm Support wheels: 18/18.5-8 Fsdpfx Asx Strqskbepk With scrapers for the rear wheels 3 m transport width Tine pre-tensioning with traction spring Double, hydraulically adjustable Stepless adjustment of tine pre-tension HM tine harrow 60 mm carbide coating, suitable for standard and mulch seeding tines Trailing harrow – only for the rear 6 wheels

Condition: used, Year of construction: 2023, working width: 6,000 mm, TRANSFORMER 6 VF Horsch row-dependent hoeing machine Row spacing: 50 cm Folding frame with clamping profile 3 m transport width Fpsdpfx Aox Strkekbok 2 steel gauge wheels Gauge wheels with 2.00 m track width Lighting Support wheel tire size: 23/10.50-12 Frame height in field: 660 mm 3-point implement mount Cat. III Shifting unit 13 hoe elements with single-acting lift cylinder Parallelogram standard depth control wheels 300 x 100 RowLift preparation for 13 hoe elements single-acting (hydraulic & electric preparation for SectionControl) Claas Culticam, camera steering with one camera Light kit for camera steering with one camera 37 EdgeOn tines 37 EdgeOn shares, share version 180 mm 6 EdgeOn tines 6 EdgeOn shares, share version 180 mm Conversion kit from 13 rows to 9 rows with single-acting lift cylinders (incl. hydraulic hosing, tine carrier tubes, and mounting material) Crop protection discs First use Supplier freight

Condition: used, Year of construction: 2018, MU-FARMER 300 F Fpedpfx Akjzk R Nujbsk Used Müthing front-mounted mulcher, Farmer 300F model. Warning signs with lighting. Working width: 3 m.

Condition: used, Year of construction: 2018, MU PRO S 250 Used Müthing side mulcher, MU Pro S 250 Fedpfx Akozk R Nnebjpk Warning signs with illumination.

Condition: new, Year of construction: 2025, VL 175 (0010) DRAGONE VL series flail mower (0020) Type: VL 175 (0030) mm working width (0040) mm overall width (0050) 20 flails (0060) Rear mounting (0070) Three-point linkage CAT II (0080) Gearbox 540 rpm (0090) Gearbox rotates clockwise (in the direction of travel) (0100) Standard gearbox position (offset to the left) Fsdszk R Tyopfx Akbspk (0110) Lateral adjustment to the right (500 mm) (0120) Standard mulching housing (0130) Weight: 525.00 kg (0140) WALTERSCHEID universal joint VL/V (0150) Hydraulic lateral adjustment (400/500 mm) VL series

Condition: used, Year of construction: 2025, MU-FM HYDRO 140 (0010) Müthing front-mounted mulcher (0020) Working width 140 cm (0030) Made of fine-grained steel QSt/E for front mounting on large-area mowers (0040) Wedge-shaped belt guard with inspection opening (0050) Screw-on short chopping blade system "Shark Fin" (0060) Hardox wear strips, screw-on (0070) High-strength, heat-treated oscillating protective flaps made of spring steel (0080) Stable, large-sized, and height-adjustable support wheels (0090) Support wheels can be swiveled 360° (0100) Smooth-running rotor (0110) Without mounting bracket (0120) Support roller for height adjustment of the mulcher (0130) Without drive (0140) Hydraulic drive, designed for a flow rate of 35-40 l/min (0150) Wear insert in the housing (0160) Adaptations adjustable WEIDEMANN (0170) Adapter plate with hydraulic side shift 700 mm to the right Fsdpfx Akjzkcrbobopk

Condition: used, Year of construction: 2026, THULIT MF/1200 Lemken rotary harrow Hydraulic system: Load-sensing system Front support wheels: 6 pcs. Rear support wheels: 4 pcs. Tires: 4x19x7.00-8 / 6x16x6.50-8 Upper link hitch: Cat. 3 Lower link hitch: L2 Z3 (Cat3N) Fpjdpfjzif U Asx Akbek Included as standard equipment: Support leg: front and rear Hydraulic folding: V-folding Lighting system: European rear-mounted system

Condition: used, Year of construction: 2024, EC-RIDGER 7 Lemken cultivator Standard equipment, plus: Frame 100x100mm - 3200mm Support for ED weeder Folding support wheel 4 pairs of cultivator discs TRS element with ball bearing on the frame Length of sliding part 300mm Large spring tine with narrow share Stainless steel ridge former, left 75cm Stainless steel ridge former, right 75cm Carrier for leaf lifter Fsdpfxszigato Akbepk Additional frame with 5 depth loosening elements LED lighting