Condition: new, Year of construction: 2026, Müthing MU L/S 220 New machine, year of manufacture 2026 Rear and side mulcher with 2.20 m working width Three-point linkage Cat. 2 Hydraulic side shift via pivoting arm (171 cm shift range) Total working width 421 cm Requires 2x double-acting hydraulic connections Adjustable Vario cutting bar Bolt-on short shredding bar – shark fin design Transport lock Gearbox with freewheel, 540 rpm Wear insert in the housing Wide-angle PTO shaft | Internal no.: 11364247 Gbjdpoyiv R Nsfx Ah Djh

Condition: used, Year of construction: 2021, KORALIN 9/660 KUA LEMKEN cultivator in standard configuration, additionally equipped with: lighting system (LED) front and rear, tine and hollow disc protection device, dual-line pneumatic braking system, 43 hollow discs, D 510mm, tyres 385/65 R 22.5, lower link attachment L3 Z3 (Cat3), following roller D400/400 tube/flat, following harrow behind roller, 2 trailing tools without, goosefoot shares 380 mm, carbide, support / gauge wheel 1 pair, EU compliant / EU type approval. Gsdpfxsyhxuls Ah Dobh

Condition: used, Year of construction: 2021, operating hours: 2,400 h, power: 235 kW (319.51 HP), maximum speed: 40 km/h, first registration: 10/2021, front tire size: 650/60R34, rear tire size: 710/75R42, empty load weight: 13,000 kg, maximum load weight: 18,000 kg, Equipment: air conditioning, all wheel drive, cabin, compressed air brake, onboard computer, power assisted steering, power shift gear, Viewing by appointment only - 2,400 operating hours (hours may vary as the tractor is in use) - 10 front work lights Gbjdpfxoxu R Dto Ah Deh - 8 rear work lights - 5 rear double-acting spool valves - 2 front double-acting spool valves - CommandCenter 8.4 inch display processor - AutoTrac activation for CommandCenter - CommandView III Premium cab with ActiveSeat - Premium radio package - 45 km/h maximum speed - Hydraulic pump with 321 l/min flow rate - Rear hitch with drawbar (Cat. 4) - R2 LED lighting package - Intel power management - Immobilizer - Coded key - Hand throttle for foot speed control - Front linkage - Loader/driving light package - Dual air trailer brake - Reverse alarm - Chock holder - LHR linear control - Engine: 8,984 cm³ - PTO shaft 1000/1000E - Battery disconnect switch - ILS with hydraulic differential lock - Refrigerator 6.4l - Automatic 3-in-1 attachment hitch for implement 841L, operated via multifunction lever Subject to prior sale, errors and typographical mistakes excepted.

Condition: used, Year of construction: 2012, operating hours: 8,600 h, power: 121 kW (164.51 HP), next inspection (TÜV): 11/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, CLAAS 550 ARION C-MATIC FRONT LOADER 100 CENTURY EDITION NEW TIRES ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST Gbsdoyh S Tnopfx Ah Deh * ENGINE CONTROL UNIT DEFECTIVE VEHICLE FEATURES * 4-CYLINDER WITH 121 KW * CENTURY EDITION * HEXASHIFT * AIR CONDITIONING * SUSPENDED CABIN * ONBOARD COMPUTER * FRONT HYDRAULICS * SUSPENDED FRONT AXLE * FRONT LINKAGE & REAR LINKAGE * FRONT LOADER QUICKE TYPE: Q66 * CONTROL UNIT: DW 4 * FRONT LOADER WITH 4 CIRCUITS AND SELECTOR SWITCH * AIR BRAKE LINES FOR TRAILER * ADJUSTABLE TRAILER HITCH (UP & DOWN) * ENGINE CONTROL UNIT DEFECTIVE * TIRE SIZE: FRONT: 540/65R28 * REAR: 650/65R28 * NEW TIRES – INVOICE FOR €7,000 AVAILABLE * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 ----EXPORT CUSTOMS CLEARANCE EXW IN 10 MIN. (APPROVED EXPORTER) 5-DAY, 15-DAY, 30-DAY LICENSE PLATES AND 15-DAY AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID For sales to the EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required. Changes, errors and prior sale reserved! You will find more vehicles on our website. Sales are made exclusively in accordance with our terms and conditions – see homepage. Important Notice – Important Information: Despite careful review of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of various platform providers. Therefore, we wish to point out that all information is provided without guarantee and does not represent any legal entitlement. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: used, Year of construction: 2014, operating hours: 7,900 h, power: 360 kW (489.46 HP), maximum speed: 30 km/h, front tire size: 635mm, rear tire size: 600/65R28, tire size: 600/65R28, Equipment: all wheel drive, cabin, lighting, onboard computer, yield monitor with GPS, Tyres (front): 635mm, Tyres (rear): 600/65R28, Operating hours: 7,900, Drum / Rotor hours: 6,200, Engine manufacturer: Caterpillar, Engine type: C13, Hydrostatic drive, Air-suspended seat, Beacon, Radial spreader MD_B04_0020 AUTO CONTOUR cutting system control MD_B05_0010 Lighting for folding attachments, machine side MD_B06_0020 Header drive 120 kW, variable 284-425 rpm MD_B08_0040 Cutterbar cylinder with 2-way system MD_B10_0035 E-channel (S) - CONTOUR, chain MD_B11_0010 Automatic trailer coupling MD_B12_0020 Dust extraction for E/V/HP channel MD_B13_0010 Support roller MD_B13_0030 Open deflection roller MD_B16_0010 Cutterbar brake MD_C02_0110 APS threshing system - grain (10/7/18) MD_C03_0180 Conversion kit - grain to maize, closed threshing drum MD_C04_0040 Threshing drum drive 2-stage - 166-483 / 395-1,150 rpm MD_D06_0020 ROTO PLUS variator drive MD_D10_0040 Hydraulic rotor cover adjustment MD_E02_0010 Fan variator L MD_E04_0020 Standard cleaning, including 3D MD_E10_0020 Without returns volume measurement MD_E14_0010 Upper and lower sieves, standard MD_F02_0314 Grain tank 11,000 litres, PREMIUM LINE MD_F06_0060 Long grain tank unloading auger, PREMIUM LINE MD_F08_0030 Grain tank unloading 2XL MD_G02_0240 Radial spreader - SPECIAL CUT MD_N02_0624 Drive axle L - TERRA TRAC MD_N04_0005 Auxiliary wheels for crawler track MD_N05_0122 TERRA TRAC track width 635 mm incl. lubrication strip MD_N05_0130 Access ladder with driving protection MD_N08_0462 Adjustable steering drive axle (8-hole) MD_N10_0442 Steering axle tyres 600/65 R28 x 275 IMP, 8-hole MD_N12_0030 Travel speed 30 km/h MD_P02_0642 Caterpillar C13 - 360 kW/490 hp (T4i) Gbodpfx Asx Iby Ieh Doh MD_P03_0090 Fuel consumption measurement MD_P06_0024 CAT pre-fuel filter, T4i MD_P12_0040 Special horizontal air filter MD_P14_0115 Fuel tank 1,150 litres MD_Q06_0100 CEBIS terminal with colour display MD_Q07_0050 Printer for CEBIS MD_Q07_0355 PROFI CAM MD_Q08_0012 QUANTIMETER yield measurement MD_Q10_0030 Comfort air-suspended seat MD_Q12_0020 Work lighting - Plus MD_Q13_0010 Inclination sensor MD_Q16_0020 CMOTION multifunction control lever MD_R03_0070 Automatic throw direction adjustment MD_R04_0010 Electrically adjustable mirrors MD_R05_0010 Automatic chain lubrication for grain tank unloading MD_S02_0010 Legal equipment for right-hand traffic MD_S03_0013 Beacons, 3 pieces Location: Customer

Condition: used, Year of construction: 2010, operating hours: 2,637 h, Equipment: air conditioning, cabin, chaff cutter, crop cutter, onboard computer, CX 8040 New Holland Combine Harvester 6-cylinder turbo engine, 210 kW / 286 HP 750 litre fuel tank NH E.C.S threshing system with 750 mm threshing drum, beater drum, centrifugal separator, quad drum, counter-rotating lamella sieves with pre-cleaning, electric sieve adjustment from the cab and from the rear, Godpfsyhxviex Ah Dsbh 5 straw walkers, straw chopper with 4 rows of knives Skyline cab with air conditioning, air suspension seat, passenger seat, electrically adjustable exterior mirrors, control console, Intelli-View touch screen monitor, fully automatic crop type selection via Intelli-View heating, hydrostatic drive 4-speed transmission with electric shifting automatic trailer hitch, differential lock, electric chopper plates, grain tank 9,000 litres Tyres: 800/65 R32 & 500/70 R24 Varifeed header 6.09 m with #209952069 electric rapeseed knives single axle header trailer, non-braked chaff spreader yield monitoring including moisture measurement monitor with 2 cameras including wiring and work lights including RTK steering system

Condition: new, Year of construction: 2023, gearing type: other, first registration: 01/2023, mileage: 1 km, driver cabin: other, Additional Equipment * Vario Snow Plow KL-V 32 * Combination Scraper Blades 36 (set) incl. Shock Absorber Strips * Snow Plow with Lifting Device * Adapter Group for Mounting Plate Size 5 * Adapter Group Hydraulic (lifting/lowering/shifting with Comfort Hydraulic) – 4 circuits * Adapter Group Couplings – ISO 7241 cone-sealing (S) (Size 12/BG3) – 4 circuits * Coupling for Return Line – cone-sealing – ISO 7241 (M) (Size 19/BG4) * Sliding Plate Gbsdpfx Ajxqfdyeh Deh * Rubber Splash Guard * Curb Guard (set) * Warning Flags with Plastic Pole and Holder (set) * Red/White Warning Markings * Plow Lighting/LED Marker Lights – Profi version (7-pin plug) Other Information: * Trade-in and purchase of vehicles and machinery possible. * Sales price excludes transport and delivery. * No liability for printing or typographical errors. * Subject to error, alterations, and prior sale. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: used, Year of construction: 2021, QUARTER BI-ST8 010 Used Evers strip-till machine, 8 rows 020 3-point linkage Cat. 3, hydraulic folding 030 Vogelsang distribution head, 16 outlets 040 Rear lighting with warning panels Godsyhr Izopfx Ah Dsbh 050 Hydraulic depth adjustment for front elements 060 Mechanical depth adjustment for middle elements

Condition: used, Year of construction: 2010, working width: 6,000 mm, ED 602 K 0010 Used Amazone ED 602 K 0020 Variant: Maize Planter 0030 Precision seeder 0040 Working width: 6 m 0050 Number of rows: 8 0060 Row spacing: 75 cm 0070 Rear mounted 0080 Seed type: maize 0090 Control terminal 0100 Row marker 0110 Hydraulic folding mechanism 0120 PTO shaft 0130 PTO speed: 540 rpm 0140 Tramline control 0150 Electronic monitoring 0160 Lighting 0170 Warning signs 0180 Press wheels 0190 Double disc coulter 0200 Mechanical coulter pressure adjustment 0210 Fertilizer placement 0220 Single disc fertilizer coulter 0230 Roll-over canvas 0240 Fertilizer filling auger Godpfx Aheyhr I Ij Dobh 0250 LED work lights

Condition: used, Year of construction: 1997, working width: 27,000 mm, Equipment: compressed air brake, PRIMUS 25 0010 RTS Primus field nozzle 0020 ltr, 27 m boom 0030 Full computer control, towing eye, single axle, air brakes 0040 12.4 R46, steel boom, hydraulic folding, 0050 50 cm nozzle spacing, single mount Gedpeyhr Iusfx Ah Djbh

Condition: used, Year of construction: 2024, PGS 4 0010 used Dewulf potato cutting machine PGS 4 0020 Overall length (incl. feed conveyor) [cm] 496 0030 Overall width of cutting section [cm] 131 0040 Overall width of feed conveyor [cm] 100 0050 Feed conveyor belt width [cm] 78 0060 Overall width of discharge conveyor (variable) [cm] 90 0070 Effective width of discharge conveyor [cm] 60 0080 Feed height [cm] 61 - 111 0090 Discharge height [cm] 49 - 98 0100 Number of cutting lanes 4 0110 Weight, approx. [kg] 400 Gbjdpfx Aheyhr I Us Doh 0120 aggregate

Condition: used, Year of construction: 2017, PGS 4 0010 Used Dewulf potato cutting machine PGS 4 Gbodpsyhr Nfjfx Ah Dsh 0020 Overall length (incl. feed belt) [cm] 496 0030 Total width of cutting section [cm] 131 0040 Total width of feed belt [cm] 100 0050 Feed belt width [cm] 78 0060 Total width of discharge belt (variable) [cm] 90 0070 Effective width of discharge belt [cm] 60 0080 Feed height [cm] 61 - 111 0090 Discharge height [cm] 49 - 98 0100 Number of cutting paths 4 0110 Weight, approx. [kg] 400 0120 aggregate

Condition: used, Year of construction: 2023, Equipment: compressed air brake, 0010 As-new Kuhn PROFILE8014.2CS 0020 Feed mixer wagon approx. 14 m³. 0030 2 mixing augers, Gbedpfeyhr Insx Ah Deh 0040 Upper hitch with drawbar eye, 2 air brakes, 0050 Wide-angle PTO shaft, 0060 Hydraulic support leg, 0070 Hydraulic front slide gate, 0080 Front cross conveyor, discharge left/right, 0090 Access ladder, platform, 0100 Kuhn DG600 control unit with weighing system, 0110 Tyres: 435/50 R19.5

Condition: used, Year of construction: 2019, operating hours: 3,915 h, power: 157 kW (213.46 HP), Equipment: air conditioning, cabin, compressed air brake, front-end loader, 6215 AGROTRON TTV Used Deutz tractor 6215 AGROTRON TTV WARRIOR All-wheel drive as standard Deutz 6-cylinder SCR / AdBlue Gsdeyhr H Ropfx Ah Djbh Reversible transmission, continuously variable, 40 km/h Suspended cab, air conditioning, ventilation, heating, sunroof, air seat Radio, multifunction armrest, adjustable steering wheel, Topc terminal Work lights front and rear Suspended front axle Dual-circuit compressed air system Lower link hitch K 80 Hydraulic valves: 5x double-acting rear, 1x double-acting front, pressure-free return rear Cross lever, external controls on mudguard Stoll front loader ProfiLine FZ 80.1 Locking, 3rd oil circuit 540/65-R30 Trelleborg tires 650/75-R38 Trelleborg tires GPS steering system RTK

Condition: new, Year of construction: 2025, KR R42 Godoyhr Egjpfx Ah Debh 010 Set of Vredestein complete wheels, suitable for Claas Axion 8xx A61/A51 R30 Vredestein Traxion XXL 158 D, TL 030 Rim 20x30 Claas red, track width 2,150 mm R42 Vredestein Traxion XXL 173 D, TL 050 Rim 23x42m Claas red, track width 2 mm 060 Tread depth on all tyres 100%

Condition: used, Year of construction: 2018, Equipment: compressed air brake, 20,300 TW PROFI LINE (0010) Used Wienhoff 20,300 TW PROFI LINE (0020) Slurry tanker with interior coating and (0030) exterior paint finish. (0040) 6.20 m cylinder, Gbodpfx Asyhr Nxeh Deh (0050) 6 mm wall thickness, 2.00 m tank diameter, 3 (0060) welded baffle plates inside the tank and (0070) inspection hatch parallel to the rear (0080) cover. (0090) Tank with fluid displacement (0100) for optimum drawbar load distribution. (0110) Color: RAL 6002 (leaf green). (0120) Simple tank filling and venting system with (0130) galvanized pipe routed through the tank. (0140) E-hydraulics – second tank filling and (0150) venting at the rear for FV. (0160) Level indicator with sight glass, 150 mm (0170) at the front of the tank. (0180) Float-type level indicator, front tank, for Can-Bus. (0200) 8" suction port reduced to 6" with hydraulic (0210) valve and quick coupler (0220) Quick coupler with ball valve, front left. (0230) 6" mechanical valve with quick coupler (0240) (directly in tank for suction). (0250) 14 ton Gigant air suspension, tandem axle, (0260) forced steering with cable, 150 BPW axles, (0270) track width 2225 mm. (0280) Low center of gravity: axles above (0290) the springs, wheel arches over both axles. (0300) Wienhoff "L&S" safety plus for (0310) tandem: (0320) - automatic adjustment of air suspension pressure (0330) to load distribution (0340) - Roll Stability Program (RSP) (0350) - ABS system (0360) - Drawbar load sensor (0370) Wheels: 800/60 R 32 Vredestein Fl. Trac (0380) Hydro-pneumatic sprung lower linkage (0390) K80 with hydraulic support leg, K80 with large (0400) flange (4 t). (0410) 2-line air brake system with ALB (0420) 40 km/h specification with galvanized fenders: (0430) Galvanized fenders with round steel edge, (0440) warning signs & marker lights (0450) underrun protection with truck lighting (0460) 40 km/h TÜV certificate (0470) Additional lights on top of the tank as LED (0480) version. (0490) LED work lights, 2 pieces, (0500) Positions: (0510) 2x left/right (0520) 2x rear (0530) 1x on suction arm (0540) Active marker lights instead of standard reflectors (cat's eyes) on vehicle sides, LED. (0560) Large stone trap box with door opening (0570) and preparation for Vogelsang RotaCut M (0580) 10 rotary lobe pump VX 186/390Q - L/min (0610) Injection system with hydrostat (0620) hydraulically regulated rotary lobe pump via RPM. (0640) PTO shaft, (0650) - gearbox (0660) - hydrostatic pump (0670) - regulated oil cooler & oil tank (0680) Drain valves at pump suction and (0690) pressure side. (0700) Wienhoff fill turbine, 8 inch, type 30 (0710) for docking arm. (0720) With valve for E-hydraulics. (0730) Monitoring unit on pressure side (0740) Pressure gauge on pressure side with (0750) diaphragm gauge (0760) Monitoring unit on suction side (0770) Vacuum gauge on suction side (0780) with diaphragm gauge. (0790) With 8" inspection flap. (0800) 2" pressure relief valve at vacuum gauge. (0820) PRESSURE FILTER BEFORE CONTROL BLOCK! (0830) WieTaCon 14-1 / PTW basic function. (0840) Aux variant 6 / suction / docking arm (0850) all / boom / spreading / headland / 2-axle joystick. (0870) Auxiliary control box, suction valve (0880) bottom left and right. (0890) Auxiliary control box, lift control up/down (0900) rear left. (0920) Preparation for Wienhoff N-sensor (0930) Hydraulic pipes instead of hoses installed to the rear, (0940) coupling brackets mounted at rear sides. (0960) Pressure line routed above the tank with

Condition: used, Year of construction: 2022, operating hours: 60 h, power: 60 kW (81.58 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * EZ: 02/2023 * Compressed air supply system, two lines * Front loader with 3rd + 4th hydraulic working circuit * Load sensing * System with variable displacement pump * Comfort seat with air suspension * 38 mm automatic trailer coupling * Swivel mudguards * Power Setting 2 * Front axle suspension Gsdpfovh Dncsx Ah Dobh Subject to errors and prior sale Viewing only possible by appointment

Condition: new, Year of construction: 2026, working width: 4,500 mm, Claas Volto 45 Year of manufacture: 2026 – New machine - Tedder for 3-point linkage, Cat. I+II - Working width: 4.50 m - Drive: 540 rpm - 4 rotors, each with 6 tine arms - Rotor diameter: 1.50 m | Internal no.: 11337064 Gbedpfx Aeyig Eboh Djh

Condition: used, -AUCTION MACHINE-- ab-auction GASPARDO Used seed drill combination Maschio Gaspardo M300 and Rau rotary harrow with toothed packer roller Lighting PTO shaft Tine harrow Year of manufacture: 1998 Inspection prior to bidding is recommended Gbodpfxsx R H U Aj Ah Deh Functions have not been tested Trailing coulters Hydraulic lifting tower You can place bids online for this machine Starting price is EUR 900.00 excl. VAT. Register for free and place your bid. Click here to go to the auction: ----- ----- Exciting Online Auction! Start bidding NOW! ab-auction

Condition: used, Year of construction: 1997, IRRIGATION Used Irrland irrigation system Gbedpfx Ahoyhr Hde Djh 110 mm hose 380 m hose Multiple nozzles 010 full computer

Condition: used, Year of construction: 2020, operating hours: 335 h, power: 192 kW (261.05 HP), Equipment: air conditioning, cabin, chaff cutter, crop cutter, 5255 L used Fendt combine harvester Front tyres: 650/75 R32 Rear tyres: 460/70 R24 automatic hitch Proline cab air seat throughput display loss monitor air conditioning Varioterminal 7" moisture measurement front work lights: halogen rear work lights: halogen rotating beacon Number of drums: 3 Gbjdpfeyhr E Tsx Ah Deh Number of straw walkers: 5 Grain tank: 8,600 litres reverser straw chopper chaff spreader PowerFlow header 5.50 m - Serial no.: transport trailer - Serial no.:

Condition: used, Year of construction: 2019, operating hours: 8,810 h, power: 206 kW (280.08 HP), Equipment: air conditioning, front power take-off, -AUCTION MACHINE-- ab-auction AXION 870 CMATIC CEBIS Used Claas tractor Gjdpfexuxb Tsx Ah Dsbh Business equipment package: - Automatic climate control, incl. preparation for activated charcoal filter - Side and wide-angle mirrors - LED work lighting: 2x indicator holders, 2x rear mudguards RTK NET equipment package: - CLAAS navigation computer - S10 terminal - RTK NET correction signal - RTK activation Front tyres: 600/70 R30 Rear tyres: 710/70 R42 External controls for front linkage & front spool valve Electronic draft control Hydraulic top link, catch hook Cat. 3 Swinging drawbar with ball hitch, K80 K50, left side 5 proportional electrohydraulic spool valves Front linkage & 1 double-acting spool valve at the rear Stainless steel exhaust cover Terminal bracket, central and upper position Work lights: 4x LED roof front, 4x LED roof rear Leather seat, semi-active suspension with seat heating, swivelling Passenger seat, leather MP3 radio with Bluetooth, USB and remote control 2 rotating beacons Sauter front PTO Towing hitch Load-sensing hydraulics You can place your bid for this machine online! Start price: EUR 29,900.00 excl. VAT Register for free and place your bid. Go to the auction here: ----- ----- Exciting Online Auction! Start bidding NOW! ab-auction

Condition: used, Year of construction: 2020, operating hours: 6,000 h, power: 120 kW (163.15 HP), Equipment: air conditioning, front power take-off, front-end loader, 516 VARIO S4 0010 Fendt Tractor 0011 Fendt 516 Vario S4 Base Tractor 0012 ProfiPlus version 0013 Heated fuel pre-filter 0014 Planetary rear axle 0015 PTO 540/540E/1000 rpm 0016 50 km/h version 0017 EHR electronic hitch control for rear linkage, double-acting 0018 Top link quick coupler Cat. 3/2 0019 Hydraulic top link quick coupler Cat. 3/2/90 0020 Ball bushing Cat. 2 for top link quick coupler 0021 Ball bushing Cat. 3/2, 1 pair for lower link quick coupler 0022 Ball bushing Cat. 3/2 for top link quick coupler 0023 Front linkage Cat. 2 0024 Hydraulic pump 158 l/min 0025 Additional valves double-acting 1/1+1/2 rear UDK 0026 External hydraulic valve actuation 0027 Power-Beyond 0028 Front return flow 0029 Pressureless return flow rear 0030 Additional valve double-acting 2/1 front 0031 Additional valve double-acting 1/3 rear UDK 0032 Additional valve double-acting 1/4 rear UDK 0033 Automatic air conditioning 0034 Standard taillights / indicators 0035 Paint: Nature Green / Rims Terra Red 0036 Pneumatic cab suspension 0037 Super comfort seat, air-suspended 0038 Electric mirrors + wide-angle mirror 0039 Rear window 0040 Roof hatch VarioGuide 0041 Steering wheel incl. spinner knob 0042 Vario TMS 0043 Working lights roof rear / 2 pairs 0044 Vario terminal 7" 0045 Vario terminal 10.4" 0046 Panoramic cab VisioPlus 0047 Segment wiper / 2 wiping fields 0048 WITHOUT immobilizer 0049 Additional front lighting 0050 LED beacon left 0051 Terminal bracket 0052 Radio - CD MP3 with hands-free kit 0053 Working lights roof front 0054 Rear wiper and washer 0055 Working lights roof front inside 0056 Fire extinguisher 0057 Corner lights 0058 2 additional coaxial speakers Gbedpfx Ahjx R Npcs Djh 0059 Universal mobile phone holder 0060 Working lights A-pillar + rear mudguard 0061 VarioGuide Standard NovAtel 0062 Track guidance basic package 0063 Track guidance RTK NovAtel 0064 Section Control 0065 Smart Connect 0066 Machine control basic package 0067 Mechanical handbrake 0068 DL – procurement system / 2-line system 0069 Automatic hitch 38 mm pin 0070 Front mudguard, pivoting 0071 Front loader multi-coupler / 3rd & 4th circuit 0072 R28 142D TB -20 8 W16LX28 0073 R38 157D TB -70 8 DWW20AX38 0074 mm track width front 0075 mm track width rear 0076 Alö front loader Q6S 0077 3rd hydraulic circuit, ride control 0078 Hydraulic implement locking

Condition: used, Year of construction: 2021, CAREX 410 S 0010 used Bergmann CAREX 410 S 0020 Operating hours: 1272 0030 Chassis no.: W0902147SMB73104 0040 Year of manufacture: 2021 0050 Hours on discharge wagon Gedpfx Ahjyhxvps Djbh 0060 105 hours on forage wagon with pick-up 0070 Bergmann CAREX 410 S loader wagon, 41 m³ 0080 featuring 0090 Tandem chassis with dosing roller 0100 Tandem chassis with hydraulic axle compensation 0110 Steering axle 0120 Narrow drawbar for high maneuverability 0130 41.5 m³ DIN loading volume 0140 Single rotor system 0150 Hydraulic front wall and front flap 0160 3 dosing rollers 0170 From 150 HP 0180 Controlled pick-up (2,050 mm working width) with double windrow roller for 0190 reliable crop collection 0220 Rotor: 1,470 mm wide, 850 mm diameter 0230 41 knives, individual knife protection 0240 Hydraulic knife switching 0250 Conveyor floor lowered forwards by 275 mm for improved crop flow 0270 Movable front wall as standard to increase loading volume 0290 Forage harvester flap for use as a silage transport wagon 0310 Comfortable operation via ISOBUS using the tractor terminal 0330 Load sensing hydraulic system 0340 Drawbar suspension 0350 Hydraulic pick-up pressure relief 0360 Rotor cover 0370 Tyres: 710 / 50 R 26.5 BKT

Condition: used, operating hours: 7,378 h, Equipment: air conditioning, cabin, compressed air brake, front power take-off, AGROTRON TTV 620 Used Deutz-Fahr Agrotron TTV 620 - Front linkage with top link - 1 double-acting spool valve at the front - Hydraulic top link at the rear - 4 double-acting spool valves at the rear - Pressureless return at the rear Gbjdpfjyhxvcjx Ah Dsh - Power Beyond - Single and dual-line air brake system - Fixed K80 ball hitch - Automatic drawbar - Rear linkage - Operation from the mudguard - Pneumatic cab suspension - Front axle suspension - 14 LED work lights - PTO: 540/540E/1000/1000E rpm - Radio - Air conditioning - Floor mat in cab - Air-cushioned seat - 540/65R28 BKT Agrimax front tires - 650/65R38 BKT Agrimax rear tires