Used chaff cutters for sale (48)

Condition: new, Year of construction: 2026, Vehicle description: Bdjdpfjzap Ntsx Ap Ijc Wood chipper Först TR6P40 Year of manufacture: 2026 – brand new Equipment: - Infeed roller opening: 6” x 8” (150 x 200mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Top-open flywheel, 640 x 25mm, double blade, 8" - Engine: Briggs & Stratton Vanguard – 40 hp V-Twin gasoline engine - No Stress System AutoIntelligence “No Stress” device - Fully water- and vibration-resistant touchpads - Tank capacity: approx. 30 liters - Noise level: Lwa 122 dB - Machine length (hopper folded): approx. 2,695 mm - Width (crawler undercarriage retracted/extended): 800mm / 1150mm - Machine height (with discharge chute): approx. 2,395 mm - Weight: approx. 1,200 kg Delivery by freight forwarder is possible; the costs must be borne by the buyer. Subject to change/errors/prior sale. = Further information = Please contact Timm Freese for further information.

Condition: new, Year of construction: 2026, Vehicle description: Först ST8D55 wood chipper Year of manufacture: 2026 - brand new Equipment: - Infeed roller opening: 8” x 10” (200 x 255 mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Top-open flywheel, 640 x 25 mm, double blade, 10" - Engine: 55 hp Doosan DPF diesel engine - No Stress System AutoIntelligence “No Stress” device - Fully water and vibration-resistant touchpads - Tank capacity: approx. 35 liters - Noise level: Lwa 122 dB - Machine length (hopper folded): approx. 3,690 mm - Machine height (with discharge chute): approx. 2,430 mm - Weight: approx. 1,375 kg - Brake: Fully braked chassis & handbrake Delivery by freight forwarder is possible; the costs must be borne by the buyer. Subject to changes/errors/prior sale. = Further information = Please contact Timm Freese for more information. Bsdpfjzap Nmox Ap Ijdc

Condition: new, Year of construction: 2026, Vehicle description: Wood chipper Först ST6P40 Year of manufacture: 2026 - factory new - Bdedjzap Ngjpfx Ap Isc Equipment: - Infeed roller opening: 6” x 8” (150 x 200mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Top-open flywheel 640 x 25mm, double knife 8" - Engine: Briggs & Stratton Vanguard – 40 hp V-Twin gasoline engine - No Stress System AutoIntelligence “No Stress” device - Fully water- and vibration-resistant touchpads - Tank capacity: approx. 30 liters - Noise level: Lwa 122 dB - Machine length (hopper folded): approx. 3,350 mm - Machine height (with discharge chute): approx. 2,285 mm - Weight: approx. 745 kg - Brake: Fully braked chassis & parking brake Delivery by freight forwarder is possible; the costs must be borne by the buyer. Subject to changes/errors/prior sale. = Further information = Please contact Timm Freese for more information.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 508 h, next inspection (TÜV): 10/2026, mobility: mobile, Schliesing 220 MX Chipper – Professional Wood Shredder – Top Condition For sale is a reliable and powerful Schliesing 220 MX chipper, which was rarely used in our property maintenance service. The chipper has always been stored under a roof, is in perfect technical condition, and has recently been repainted and serviced (all filters and engine oil replaced). Technical data: Manufacturer: Schliesing Type: 220 MX Year of manufacture: 2006 Operating hours: approx. 508 h Engine: Kubota Diesel, V1305-EU1 approx. 35 hp (25.7 kW) FAMILY 3KBXL01.3BCD Max. branch diameter: approx. 160–180 mm Bsdpfx Ajy D Dwbsp Iedc Infeed rollers: approx. 240 mm width Discharge chute: 360° rotatable Equipment & condition: Very well-maintained condition Recently serviced (oil + filters new) Drive belt has already been replaced. Newly painted Includes 1 set of replacement blades + counter blades Ready for immediate use Price: Net: €13,000 VAT (19%): €2,470 Gross: €15,470 An invoice with VAT shown will of course be issued. An inspection and test run are possible and expressly desired after prior arrangement.

Condition: used, Year of construction: 2017, Please provide reference number upon request: 21791 Specifications: Bodpexwklpsfx Ap Ijdc 2017 model 1646 Hours Weight 2000 kg Takes logs up to 19 cm About 50 hp Kubota engine 18.5 kW Raise and lower Function Ready for delivery   Description. Jensen A540 spider wood chipper works as it should according to the owner. It has a raise and lower function that allows you to maneuver smoothly in the terrain. It takes logs up to 19 cm in diameter. The machine is ready for delivery. Own weight: 2000 Model: A540 spider flishogger m/hydraulisk hev og senk funksjon = More information = Serial number: 561706xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2015, color: orange, Type of fuel: Diesel Power: 11 kW (15 HP) Bdjdpfx Ajyc Uw Ujp Iec Make of engine: Honda

Condition: used, Year of construction: 2019, color: white, Type of fuel: Diesel Bdodpfx Asy Rx Nxjp Iec Power: 381 kW (518 HP)

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick Bdedpfx Apjy Rdnas Iec - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: used, Year of construction: 2009, Please provide reference number upon request: 22847 Specifications: 2009 model Hours: about 600 34 hp Weight: 1500 kg 2 sets of knives included Bodpfeyxv A Sex Ap Isdc A set is mounted on Diesel Ready for delivery   Description: 2009 Schliesing MX220 wood chipper w/ 2 sets of knives. A set of knives is installed and comes with 2. Ready for delivery. Model: MX220 fliskutter m/ 2 sett kniver = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2025, operating hours: 105 h, Description: Wood Chipper Först TR8D55 - Demo Unit - Year of manufacture: 2025, approx. 105 operating hours .: -SA9TR800001283560- Features: - Feed roller opening: 8” x 10” (200 x 255 mm) - Feed roller system: FörstGrip feed roller system - Control system: Fully water- and vibration-resistant touchpads - Flywheel system: Top-open flywheel 728 x 30 mm, double blade, 10" - Engine: 55 HP Doosan diesel - No Stress system AutoIntelligence "No Stress" device - Fuel tank capacity: approx. 35 liters - Noise level: Lwa 122 dB - Machine length (hopper down): approx. 3,423 mm - Machine length (hopper up): approx. 2,743 mm - Machine height (with discharge chute): approx. 2,458 mm - Weight: approx. 1,625 kg Delivery via freight carrier possible; costs to be borne by the buyer. Specifications subject to change, errors, and prior sale. Bedpoyx Av Sefx Ap Iodc = Further Information = Please contact Jens Schlüter for further information.

Condition: used, Year of construction: 2025, operating hours: 100 h, Description: Year of manufacture: 2025 with approx. 100 operating hours .: -SA9TR800001283573- Equipment: - Feed roller opening: 8” x 10” (200 x 255 mm) - Feed roller system: FörstGrip feed roller system - Control system: Fully water- and vibration-resistant touchpads - Flywheel system: Open-top flywheel 728 x 30 mm with double-edged knives, 10" Bjdpjyr Icpofx Ap Iedc - Engine: 55 HP Doosan diesel - No Stress System: AutoIntelligence "No Stress" device - Tank capacity: approx. 35 liters - Noise level: Lwa 122 dB - Machine length (hopper down): approx. 3,423 mm - Machine length (hopper up): approx. 2,743 mm - Machine height (with discharge chute): approx. 2,458 mm - Weight: approx. 1,625 kg Delivery by freight forwarder possible, costs to be borne by the buyer. Subject to alterations, errors, and prior sale. = Further information = Please contact Jens Schlüter for more details.

Condition: used, Year of construction: 2025, operating hours: 90 h, Description: Year of manufacture: 2025, approximately 90 operating hours Serial number: -SA9TR800001283575- Equipment: - Feed roller opening: 8” x 10” (200 x 255 mm) - Feed roller system: FörstGrip feed roller system - Feed control: Fully water- and vibration-resistant touch pads - Flywheel system: Top-open flywheel 728 x 30 mm with twin knife 10" - Engine: 55 HP Doosan Diesel - No Stress System: AutoIntelligence "No Stress" device - Fuel tank capacity: approx. 35 litres - Noise level: Lwa 122 dB - Machine length (chute down): approx. 3,423 mm - Machine length (chute up): approx. 2,743 mm - Machine height (with ejector): approx. 2,458 mm - Weight: approx. 1,625 kg Bedpfx Apsyr Icio Ijdc Delivery by freight forwarding possible; costs to be borne by the buyer. Subject to changes, errors, and prior sale. = Further information = Please contact Jens Schlüter for more details.

Condition: used, Year of construction: 2025, operating hours: 110 h, Wood Chipper Först Cadet 6 Year of manufacture: 2025 with approximately 110 operating hours – demo unit – Features: Bdsdpfsxp Agpsx Ap Isc - Feed roller opening: 6” x 8” (150 x 200 mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Open top flywheel 640 x 25 mm, double blade 8" - Engine: 23 HP 2-cylinder Briggs & Stratton petrol engine - No Stress System: AutoIntelligence 'No Stress' device - Feed system: Fully water- and vibration-resistant touchpads - Fuel tank capacity: approx. 30 liters - Noise level: Lwa 118 dB - Machine length: approx. 3,100 mm - Machine height (with ejector): approx. 2,400 mm - Weight: approx. 745 kg - Brake: without overrun brake, without handbrake Delivery by freight forwarding possible; costs to be borne by the buyer. Subject to changes, errors, and prior sale. = Further Information = Please contact Jens Schlüter for further details.

Condition: used, Year of construction: 2024, operating hours: 230 h, Vehicle description: Year of manufacture: 2024 with approx. 230 operating hours Serial No.: -SA9XR800000283553- Equipment: - Feed roller opening: 8" x 10" (200 x 255 mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Open top flywheel 728 x 30 mm, double blades 10" - Engine: 55 HP Doosan diesel - No Stress System: AutoIntelligence "No Stress" device - Feed system: Fully water- and vibration-resistant touchpads - Tank capacity: 35 liters - Noise level: Lwa 122dB - Machine width: 1,510 mm - Machine length: 2,020 mm - Machine height (with ejector): 2,730 mm - Weight: 2,075 kg Subject to changes / errors / prior sale Bdedpfx Aswmv Epop Isc = Further information = Please contact Jens Schlüter for more information.

Condition: used, Year of construction: 2018, Equipment: cabin, ref: 240131 Reference: 240131 Type: WOOD CHIPPER Brand / Model: TIMBERWOLF - TW280 TDHB Year: 2018 Hours: 925 Weight: 1240 kg Power: 45 HP Features: - Height-adjustable drawbar - Braked road chassis - Infeed opening: 210mm x 280mm - Continuous chipping up to 210mm - 2 reversible 158mm blades - 280° swiveling discharge chute - Medium chip size: 19.5m - Throughput: 7 tonnes/hour Price excludes VAT. Delivery available at extra cost. More information and photos available on our website! Please make an appointment so we can welcome you in the best possible conditions! Our company specializes in purchase and sales. We operate a machinery yard of over 100,000 m² south of Strasbourg, with more than 350 machines in stock, including construction equipment, material handling, agricultural machinery, HGVs, passenger vehicles, and vans—stock updated monthly. We look forward to welcoming you at 17 Route d’Eschau, 67400 ILLKIRCH-GRAFFENSTADEN. *Description subject to errors* Power: 45 HP DIN Maximum wood diameter: 280mm Bdsdpjyz Dmwsfx Ap Ijc Delivery time (days): 1 Power: 33 kW.

Condition: used, Year of construction: 2024, Equipment: cabin, had accident, ref: 250633 ! Damaged equipment / Accidenté/Damaged Equipment / Verunglücktes Material ! Reference: 250633 Type: front-mounted mulcher Brand / Model: KUHN PRO 210 Bedpfx Ajyz Dmkep Iodc First registration year: 2024 ! Damaged equipment ! - Incident details: impact with a fixed object - Procedure: Insurance Write-Off (VEI) with expert follow-up Damaged equipment sold as-is, sale only to professionals or for export purposes. ! Attention: vehicles are not eligible for any warranty, trade-in, exchange, refund, or claim after the sale!* ! Please note: vehicles cannot be covered by any guarantee, trade-in, exchange, refund, or claim at the end of the sale!* Price is excluding VAT. Delivery possible at an additional cost. More information and photos available on our website! Please make an appointment so we can welcome you under the best possible conditions! Our company, specializing in purchase and sale, operates a machinery yard of over 100,000 m2 south of Strasbourg. We stock over 350 machines including construction equipment, handling equipment, agricultural machinery, heavy goods vehicles, passenger vehicles, and commercial vehicles, with inventory renewed monthly. We will be pleased to welcome you at our premises: 17 Route d’Eschau, 67400 ILLKIRCH-GRAFFENSTADEN. *Description subject to errors Working width: 2m Delivery time (in days): 1

Condition: good (used), Year of construction: 2019, operating hours: 679 h, Tracked wood chipper Greenmech SafeTrak STC 16-23, Capacity: Maximum log diameter Ø 16 cm, Max. roller opening: 160 mm x 230 mm, SafeTrak technology: slope compensation up to 35°, Maximum ground clearance: 450 mm, Engine: Yanmar 35 HP diesel, Automatic feed control and overload protection, Length (transport): 3,065 mm, Width – narrow version: 735 mm – 1,589 mm, Height: 2,410 mm, Weight: 1,370 kg, Standard color: green. CE. = Further information = Unladen weight: 1,370 kg Number of owners: 1 Bdedjw Iladjpfx Ap Iec Technical condition: good Visual condition: good Serial number: 190294 Transport dimensions (L x W x H): 3,045 x 1,589 x 2,41 Please contact Bernd Strack for additional information.

Condition: used, Availability upon request Equipment: - Feed roller opening: 8” x 10” (200 x 255mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Top-open flywheel 728 x 30mm with double blades, 10" - Engine: 55 HP Doosan diesel - No Stress system: AutoIntelligence "No Stress" device - Control system: Fully water- and vibration-resistant touchpads - Fuel tank capacity: approx. 35 liters - Noise level: approx. Lwa 122 dB - Machine width: approx. 1,385 mm Bdodpfx Aeu Azw Uop Isc - Machine length: approx. 2,741 mm - Machine height (with discharge chute): approx. 2,490 mm - Weight: approx. 1,625 kg Optional equipment available upon request (e.g. lighting mast, trailer hitch, winch) Product images are for illustrative purposes only and may differ from the actual product. Modifications/errors/sale subject to prior sale and change = More information = Please contact Jens Schlüter for further details.

Condition: new, Year of construction: 2011, power: 15 kW (20.39 HP), fuel type: gasoline, color: orange, front tire size: 165/r13c, Equipment: chassis, lighting, Equipment / Technical data: Heavy chopping disk 32 mm thick, Ø 510 mm 4 chopping blades that can be used on both sides Large hopper opening 690 x 710 mm Oversized feed opening 140 x 180 mm Ejection tube can be rotated 360 Adjustable chopping length Chassis with ball head coupling Hinged chipper cover for quick and easy maintenance Dimensions: Length 1,850 mm Width 1,320 mm Bdjdpfx Apei Rtlns Iec Height 2,210 mm

Condition: used, Year of construction: 2025, operating hours: 70 h, Vehicle Description: Year of manufacture: 2025 with approx. 70 operating hours Bdedpfxjuu A Eco Ap Ijc Equipment: - Feed roller opening: 8” x 10” (200 x 255mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Open-top flywheel 728 x 30mm, double knife 10" - Engine: 55 HP Doosan DPF diesel - No Stress System: AutoIntelligence "No Stress" device - Feed control: Fully water- and vibration-resistant touchpads - Fuel tank capacity: approx. 35 liters - Noise level: Lwa 122 dB - Machine length: approx. 3,669mm - Machine height (with chute): approx. 2,370mm - Weight: approx. 1,450kg - incl. spare wheel Special equipment available on request (e.g., light mast) Product images are for illustrative purposes only and may differ from the actual product. Subject to changes, errors, and prior sale. = More information = Contact Jens Schlüter for further information.

Condition: used, Year of construction: 2007, Equipment: cabin, had accident, ref: 250658 ! Damaged Equipment / Matériel accidenté / Verunglücktes Material ! Bodpfx Apoytx Hbj Iedc Reference: 250658 Type: Flail/Shredder Brand / Model: AGRAM PRESTIGE 185 Year: 2007 ! Damaged Equipment ! - Incident Circumstances: Impact with fixed object Damaged equipment sold as is, only to professionals or for export. !! Attention: No guarantee, trade-in, exchange, refund or claim will be possible after the sale! * !! Please note: vehicles cannot be covered by any guarantee, trade-in, exchange, refund, or claim at the end of the sale! * Sales price excluding VAT. Delivery possible at additional cost. More information and photos available on our website! Please arrange an appointment so we can receive you under the best conditions! Our company—specialized in purchase and sale—has a facility of over 100,000 m² south of Strasbourg. We stock over 350 machines including construction equipment, handling machinery, agricultural equipment, trucks, passenger cars, and commercial vehicles, with inventory updated monthly. We look forward to welcoming you at our premises, 17 Route d'Eschau, 67400 ILLKIRCH-GRAFFENSTADEN. *Description subject to error Working width: 2m Delivery time (days): 1

Condition: new, Year of construction: 2026, Description: Wood Chipper Först TR6D42 Year of manufacture: 2026 - brand new - Equipment: - Feed roller opening: 6” x 8” (150 x 200mm) - Feed roller system: FörstGrip feed roller system - Flywheel system: Open top flywheel 640 x 25mm double knife 8" - Engine: 42 HP Doosan DPF diesel engine - No Stress System AutoIntelligence "No Stress" device - Tank capacity: approx. 30 liters - Noise level: Lwa 121 dB - Machine length (chute down): approx. 3,405 mm - Machine length (chute up): approx. 2,627 mm - Machine height (with discharge chute): approx. 2,295 mm - Weight: approx. 1,430 kg Delivery possible by freight carrier, costs to be borne by the buyer. Subject to change, errors, and prior sale. Bdsdpfxeymi Ntj Ap Isc = Further information = Contact Jens Schlüter for more information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar Bsdpfjymi Najx Ap Isdc - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Bdodoyltwfepfx Ap Ijc Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO – Unit / Year: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the carrier vehicle’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 Bsdpfeyltv Uox Ap Ijdc - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 130 Spacer adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. An independent hydraulic power unit is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, connectors, and adapter plate. Financing offers available upon request. We are an official distribution and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We offer the full Seppi M. product range! Subject to errors and prior sale! Internal no.: 170048 Contact Marius Herden for further information.