Faymonville MEGAMAX 3 extendable low-loader trailer with 3 steering axles, 3.5 m, Dutch registration

Faymonville MEGAMAX 3 Stuurassen Extendable 3.5M NL Trailer...

Condition: used, Year of construction: 2011, operating hours: 2,104 h, load capacity: 4,000 kg, lifting height: 14,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,540 mm, power: 74.5 kW (101.29 HP), color: red, Equipment: all wheel drive, cabin, pallet forks, Rough terrain telescopic handler MANITOU, model: MT 1440 E3 - 4x4x4, first put into operation: 2012. LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m. LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,100 mm), LOAD GUARD, QUICK COUPLER, 4-cylinder PERKINS TURBO diesel engine (type: 3496/2200 – 101.32 HP / 74.50 kW at 2,200 rpm). FOUR-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) – CRAB STEERING mode, 2x hydraulic outriggers, SIDE SHIFT SYSTEM, OVERLOAD WARNING SYSTEM, spacious cab (tinted glass), ROPS/FOPS, air-suspension comfort seat, trailer hitch, road lighting, warning beacon/signal, 2x windscreen wipers, 2x exterior mirrors, heating/ventilation, OPERATING MANUAL (in German). Tyres: BKT OFF-ROAD TYRES (15.5/80 - 24) – approx. 98% tread all around. Transport dimensions: Length: approx. 7,330 mm (approx. 6,130 mm without forks), width: approx. 2,430 mm, height: approx. 2,540 mm. Price is net (export); in Germany, VAT applies. ∗∗∗ FINANCING POSSIBLE / WORLDWIDE TRANSPORT AT FAVORABLE RATES / FOR EXPORT, ONLY NET PRICE IS PAYABLE (!) ∗∗∗ © pb Codpsw D D Umsfx Aafori

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres Credpjyxb Tvjfx Aafoi * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: used, axle configuration: 2 axles, first registration: 12/2015, total length: 13,800 mm, total width: 2,550 mm, total height: 2,200 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,520 mm, color: blue, Equipment: ABS, = Additional options and accessories = - Toolbox - Central lubrication system = Notes = Nooteboom Euro 38-02 Removable neck. Extendable. Removable table / spine bed. Remote control. Loading length: 625 cm + 465 cm. Loading width: 254 cm - 299 cm. Loading height: 43 cm. Credpfxozn Hgks Aafji = Further information = Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Model number: EURO-38-02 / AGRI / EXTENDABLE / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: like new (used), functionality: fully functional, mileage: 1,400 km, power: 367.75 kW (500.00 HP), fuel type: diesel, wheelbase: 3,700 mm, color: white, gearing type: automatic, loading space length: 3,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, Year of construction: 2022, Available from 1 November 2025! Offered is a VOLVO FH500, 6x2 with a FASSI F705R.2.7 crane in the following configuration: FASSI F705R.2.7 with JIB L436 and winch V20 - Hydraulic reach: 28.1 m / 890 kg - Outrigger span: 8.29 m, hydraulically extendable - FASSI Stability Control FSC-Techno - Winch V20 - 2,000 daN - LED work lights on the knuckle boom - Radio remote control with joysticks (3-2-3) Crodpfjw Tbh Usx Aafei

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, General Information Year of manufacture: 2017 Operating hours: 1 Intended use: Construction Serial number: Drivetrain Drive: Wheel drive Weights Unladen weight: 48,000 kg Functional Lifting capacity: 8,000 kg Dimensions of the cargo area: 1685 x 275 x 399 cm Additional Information Condition of front tires: 90 Credsvl Dlvjpfx Aafsi Condition of rear tires: 90 Further Information Please contact PFEIFER GROUP for more information.

Condition: used, Year of construction: 2024, Use for lower link trailer Transport preparation open CW 12200 / Cambridge rings smooth LED lighting for the road Lower link trailer Cat 3 / Braked axle 3.3-4.2T Type approval EU - COC Protection against / unauthorized / Crsdpfx Aaett I N Sjfji

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering Crjdox Suzajpfx Aafoi * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, mileage: 57,215 km, power: 309 kW (420.12 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, gearing type: mechanical, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Engine D2676LF53 - 420 HP / 309 KW EURO6 SCR - 2100 Nm C-R OBD-C, Gearbox ZF 16 S 252 OD Differential lock in rear axle Multifunction steering wheel adjustable,MAN BrakeMatic,ASR,Construction access step on front fender,Heated and electrically adjustable mirrors,Air-suspended driver's comfort seat,MAN RAdio with 7" color display, navigation SD EUROPA TOTAL Trailer coupling RINGFEDER 4040 G 150B Air-suspended driver's comfort seat with lumbar support, HMF 1820 K4 RC tipper body MEILLER 4000x2420 Lashing eyes fully retractable in the bridge floor, side walls 600mm, side walls foldable, front wall 800mm, ladder stored under tipper body, rear wall 600mm, rear wall swinging and conditionally foldable with manually operated claw lock, hydraulic connection at the rear for 3-sided tipper trailer Cjdpou Al Hyefx Aafsri

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets Csdezcr Nzjpfx Aaferi 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: used, power: 124 kW (168.59 HP), empty load weight: 24,600 kg, Year of construction: 2018, operating hours: 12,500 h, One of the legendary Kobelco short-tail excavators: economical and powerful, without dozer blade and therefore under 25 tons! Incl. OilQuick OQ70/55 quick coupler. The machine has been refurbished and is ready for immediate operation! Crodpeylkbbjfx Aafsi