Packer

Amazone Walzen AW 12200

Condition: used, Year of construction: 2011, operating hours: 2,104 h, load capacity: 4,000 kg, lifting height: 14,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,540 mm, power: 74.5 kW (101.29 HP), color: red, Equipment: all wheel drive, cabin, pallet forks, Rough terrain telescopic handler MANITOU, model: MT 1440 E3 - 4x4x4, first put into operation: 2012. LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m. LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,100 mm), LOAD GUARD, QUICK COUPLER, 4-cylinder PERKINS TURBO diesel engine (type: 3496/2200 – 101.32 HP / 74.50 kW at 2,200 rpm). FOUR-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) – CRAB STEERING mode, 2x hydraulic outriggers, SIDE SHIFT SYSTEM, OVERLOAD WARNING SYSTEM, spacious cab (tinted glass), ROPS/FOPS, air-suspension comfort seat, trailer hitch, road lighting, warning beacon/signal, 2x windscreen wipers, 2x exterior mirrors, heating/ventilation, OPERATING MANUAL (in German). Tyres: BKT OFF-ROAD TYRES (15.5/80 - 24) – approx. 98% tread all around. Transport dimensions: Length: approx. 7,330 mm (approx. 6,130 mm without forks), width: approx. 2,430 mm, height: approx. 2,540 mm. Price is net (export); in Germany, VAT applies. ∗∗∗ FINANCING POSSIBLE / WORLDWIDE TRANSPORT AT FAVORABLE RATES / FOR EXPORT, ONLY NET PRICE IS PAYABLE (!) ∗∗∗ © pb Gjdpfx Ahow D D Umovoui

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) Gedpfx Ahjyxb Tvjvjui * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 Gujdpfsx Suzaex Ahvoi * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: new, Year of construction: 2026, SAPHIR 10/300 DS (0010) Saphir 10/300-DS (0020) Model series 2 (0030) Combined unit Zirkon (0040) Working width / row spacing 3 m / 125 mm / 24 rows Guodpfxjz Ez Rpj Ahvsi (0050) Seed hopper, 1160 liters capacity (0060) Digging mechanism, hydraulically operated (0070) Row arrangement for passage lanes: 2 x 3 rows (0080) Track width, center-to-center: 1.80 m, maintenance tractor (0090) Track width for passage lane, center-to-center: 1.875 m (0100) Lighting system, front and rear (0110) Lateral marking: none (0120) Deflector plates for rapeseed (0130) Level monitoring, electronic (0140) Seed disc bearing, externally mounted (0150) Scrapers: 24 pieces, carbide, for double disc coulter (0160) Protective caps (pressure roller): 24 pieces (0170) Metering wheel set Conti Plus (mounted on the unit) (0180) Roller: none (0190) GPS signal available, tractor DGPS via ISOBUS (0200) Speed detection: 1 radar sensor (0210) ISOBUS equipment: without operating terminal (0220) Conformity: EU compliant (0230) Coupling parts: Zirkon roller mounting (0240) Delivery condition: assembled