Low loader semitrailer

DOLL tera 2- Achs Tiefbett, Pendelachsen, MIETE?

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Predpfx Ahev D Abtjkjc

Condition: used, Year of construction: 2008, operating hours: 17,286 h, power: 217 kW (295.04 HP), Equipment: air conditioning, all wheel drive, cabin, FIN: 928231995 Speed: 40 km/h Automatic air conditioning Seat heating + seat ventilation Prsdpfxsvybyyj Ahkec Front axle hydraulically suspended Front: 1 x DW Front hydraulics 7-pin socket Rear: Trailer coupling device (slide), WITH coupling jaw K80 PTO 1000/540E 4 x DW Air pressure connection red + yellow Power 7-pin IsoBus LoadSensing Tires: Front: 650/65 R 34 Rear: 710/75 R 42 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is decisive. Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply.

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm Prjdpfx Asiu Er Aehkoc -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle steered -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur

Condition: used, axle configuration: 4x2, fuel type: diesel, front tire size: 6.00-19, rear tire size: 12.4R52, tire condition: 25 %, total length: 3,000 mm, total width: 1,000 mm, total height: 2,000 mm, Mileage: 999 km Tyre profile: 25% Front axle: Tyre size: 6.00-19; Steering Rear tyre size: 12.4R52 Wheelbase: 180 cm = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video: Prodpfxev Ir T Hj Ahkjc

Condition: excellent (used), mileage: 439,700 km, power: 213 kW (289.60 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,770 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Equipment: crane, differential lock, Container truck with loading crane MAN TGM 18.290 First registration: 29.10.2015 Mileage: 439,700 km Automatic transmission, 12 speeds PALFINGER PK15500 loading crane Year of manufacture: 2010 2x hydraulically extendable Lifting capacity: 3,030 kg at 4.5 m 2,250 kg at 6.1 m 1,690 kg at 8 m 5th and 6th function (slewing/grab function) Remote control Hyvalift container hooklift system Hook-roller distance (retracted): 3.65 m Hook-roller distance (extended): 5.0 m Bumper overhang: +0.25 m Psdpezl Tq Dsfx Ahkorc Front tyres: approx. 50 % Rear tyres: approx. 40 % Front brake pads: 64-62 % Rear brake pads: 30-35 % Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, overall weight: 11,500 kg, first registration: 12/1994, Structure: Very good condition, fully extendable to a total length of 18.5 m. Pedpfx Ahezix Rqokerc

Condition: new, maximum load weight: 34,104 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Further information here: Predpfov D Abgox Ahkec

Condition: new, empty load weight: 10,100 kg, maximum load weight: 38,900 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, Equipment: ABS, Chassis: -Sturdy welded steel frame construction with front frame cranking and flat loading platform with rear tapered section approx. 500x100 mm -Frame neck 200 mm with chamfered corners -Chamfered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind the rear taper) -2 kingpin positions with interchangeable 2” kingpin -Outer frame closed to the outside as perforated outer rail for lashing with tie-down straps (no chains possible) -Reinforced frame design / point load at center of gravity -Preparations for extendable loading platform wideners -With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle extending to end of vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underride guard = extended end plate -Drop-down rear support legs Ramps: -2-part special design loading ramps with mechanical extension -Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting gear (only in combination with electrohydraulic unit) -Width approx. 800 mm -Wooden ramp surface -Including traction ribs on loading ramps -Can be secured in transport position with tie-down straps -Operated via control lever, mounted at rear on right side in driving direction -Laterally shiftable via hydraulics Floor: -35 mm larch wood floor with aluminum omega profiles Landing Legs: -Mechanical 24-ton landing legs with single-side operation and load compensation Axles, Steering, and Tires: -BPW air suspension axles, 10 tons axle load each, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake linings -Automatic brake slack adjusters -Lift and lower device with total lift approx. 200 mm -2nd transport position via ball valve +50 mm -1st axle lifting axle (wired via EBS), fully automatic activation with mechanical emergency actuation via push button on the trailer -3rd axle as friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, center offset -12 tires 245/70 R 17.5 143/141J, tubeless Prjdpfx Aswviwkjhkjc -Including tire pressure monitoring Accessories: -Stakeboard side and rear walls on the gooseneck, approx. 400 mm high, plug-in design -Spare wheel holder -Side aluminum underrun protection -4 wheel chocks -Long license plate mount on rear end plate -1 ECE warning panel at the rear, plug-in -11 pairs of ZK 10t side lashing modules: -2x on the gooseneck -9x on the loading platform -Steel fenders with Clear-Pass -Extendable warning boards incl. 3 position lights each, at the front on the landing legs and at the rear in front of end plate, smoothly extendable up to loading width of 4,500 mm -4 holders for warning panels, plug-in, in stake pockets on the loading platform -6 pairs of side stake pockets for 100x50 mm plug-in stanchions -2 cross rows of stake pockets for 100x50 mm stanchions on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) -3 cross rows of stake pockets for 100x50 mm stanchions on the loading platform from outer frame to main frame (1x at the front section, 1x before 1st axle, 1x after 3rd axle) -2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container -Rubber skirt mounted on underride guard -Steel shot blasting, hot-dip galvanizing of chassis and priming -Paintwork chassis/wheel hubs/outer frame i

Condition: used, axle configuration: 2 axles, first registration: 12/2015, total length: 13,800 mm, total width: 2,550 mm, total height: 2,200 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,520 mm, color: blue, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Toolbox - Central lubrication system = Notes = Nooteboom Euro 38-02 Removable neck. Extendable. Removable table / spine bed. Remote control. Loading length: 625 cm + 465 cm. Loading width: 254 cm - 299 cm. Loading height: 43 cm. = Further information = Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Psdjzn Hgkspfx Ahkjrc Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Model number: EURO-38-02 / AGRI / EXTENDABLE / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 1979, operating hours: 450 h, power: 70 kW (95.17 HP), next inspection (TÜV): 03/2027, Equipment: all wheel drive, cabin, front linkage, * Deutz Intrac 2004 A-S * As good as new * 1st hand * Vintage H-license plate * Tractor * Only original, first :450h * EZ:10.05.1979 * HU:03/2027 * Total weight:5100kg * Empty weight:360kg * Overall dimensions: 430mm x 2025mm x 2764mm * Diesel * All-wheel drive * 51 kw / 70 HP * 3744ccm * 30 km/h * Cab * Rear hydraulics * Front hydraulics * Rear pto shaft 540/1000 Pedpfjvh Er Aex Ahkerc * Front pto shaft 1000 * Air brake * Front triangle front + rear * Work lights front+rear * 3DW hydraulic control units rear * 2DW hydraulic control units front * Air seat * Radio * 12 forward - 4 reverse gears * Heating * Full service history ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the vehicle prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for an additional charge. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: