Low loader semitrailer

NÜKTE 4 ACHS SATTELTIEFLADER VOLLAUSSTATTUNG

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions Ijdpfoiu Eu Njx Ag Retn - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: used, overall weight: 120,000 kg, axle configuration: > 3 axles, first registration: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Turntable-mounted fifth wheel plate, 3.5" kingpin, and adjustable steering wedge - Built-in hydromechanical double steering for attachment of pendle axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential lock - Designed loading area (approx. 3,700 x 2,440 mm) with chequer plate cover - Engineered for a technical fifth-wheel load up to 30 t - Steering radius of 2,800 mm for use with a 4-axle tractor unit - Coupling heights loaded: 1,350 mm - Aluminium side walls (400 mm high, on all 4 sides) Goldhofer Heavy-Duty Chassis Module Type THP/ET 3 - Load bed length 4,200 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg Goldhofer THP-ET Vessel Bridge – 75 t Payload Hydraulically extendable vessel bridge, 75,000 kg payload Base width 2,990 mm, hydraulically expandable to 4,640 mm Total vessel bridge length 9,900 mm Internal bridge length approx. 7,500 mm Technically extendable by approx. 5,500 mm Itedpfx Agowuixfs Rjn Main Beam Dimensions Length: 7,500 mm + 5,500 mm Build height: 500 mm, Width bottom: 470 mm, Width top: 320 mm Goldhofer Heavy-Duty Chassis Module Type THP/ET 5 - Load bed length 7,000 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Isdpfx Aget Irxxe Rotn Subject to errors and prior sale.

Condition: used, axle configuration: 3 axles, total length: 13,900 mm, total width: 2,750 mm, total height: 3,700 mm, color: blue, Year of construction: 2020, = Additional options and accessories = - Lifting axle = More information = Weights Empty weight: 11.960 kg Carrying capacity: 36.540 kg GVW: 48.500 kg Other information Tyre size on axle 1: 245/70 R17,5 Brake type on axle 1: disc Suspension on axle 1: air Tyre size on axle 2: 245/70 R17,5 Suspension on axle 2: air Tyre size on axle 3: 245/70 R17.5 Isdjy Tzkwspfx Ag Rjtn Suspension on axle 3: air Tyre size on axle rear: 245/70 R17,5 Brake type on axle rear: disc Suspension on axle rear: air

Condition: excellent (used), functionality: fully functional, power: 49 kW (66.62 HP), fuel type: diesel, color: yellow, overall weight: 5,500 kg, operation weight: 5,500 kg, tire size: 12,0 x 16,5 12 PR, tire condition: 90 %, axle configuration: 4x4, first registration: 03/2022, next inspection (TÜV): 06/2025, emission class: euro5, Year of construction: 2021, operating hours: 787 h, machine/vehicle number: LK0000454, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, gripper hydraulics, hammer hydraulics, hydraulics, soot filter, Yanmar 4TNV98C Stage V engine - Power 49.9 kW (66.9 hp) - Weight 5,550 kg - Speed 20 km/h - Max. digging depth 3,500 mm - Max. digging range 6,150 mm - Dipper arm 1,600 mm - Width 840 mm Equipment: - Air conditioning - Electric refueling pump - CD radio - hands-free system - Heated driver's seat Isdpfx Aou Ndyfog Rjtn - double-acting control circuit - shear, hammer function - grapple rotation function - Rear dozer blade - Pipe rupture protection on the lift and arm cylinders - Mono boom 3,000 mm Surcharge : Additional options at extra cost: - 4x balloon tires 500/40 - 17.5 Flotagrip-3 m. rim 4.210,- € - Rotating beacon 215,- € - Front headlights on cab roof € 215 - Reversing camera 495,- € - Compressor for cab cleaning 850,- € - Central lubrication system Beka-Max 3.145,- € - Pipework for hydraulic quick coupler 425,- € Bucket package normal MS-03 4.390,- € - 1x quick coupler - 2x backhoe bucket SB of your choice - 1x ditch clearing bucket all prices plus 19% VAT, subject to changes, errors, misprints and prior sale

Condition: good (used), machine/vehicle number: 8067, mileage: 30,000 km, tire size: 295/80 R 22.5, axle configuration: 4x2, wheelbase: 3,200 mm, color: grey, driver cabin: day cab, Year of construction: 2019, Tyre size: 295/80 R 22.5 Technical condition: good Visual condition: good Iodsxbnbpjpfx Ag Rjtn Last inspection: 2025-02-07 Contact Lastas Sales for more information.

Condition: excellent (used), mileage: 177,033 km, power: 120 kW (163.15 HP), first registration: 10/2016, fuel type: diesel, tire size: 195/75R16, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: other, total length: 13,600 mm, total width: 2,300 mm, permissible axle load (axle 1): 2,000 kg, permissible axle load (axle 2): 3,500 kg, permissible axle load (axle 3): 1,800 kg, loading space length: 10,000 mm, loading space width: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, soot filter, tachograph, traction control, General information Number of doors: 2 Year of construction: 2016 Cab: single Registration number: 010308 Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Axle configuration Front axle: Tyre size: 195/75R16; Max. axle load: 2000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes Rear axle 1: Tyre size: 195/75R16; Max. axle load: 3500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Brakes: disc brakes Rear axle 2: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes Rear axle 3: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes Rear axle 4: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes Weights Empty weight: 1.890 kg Carrying capacity: 4.920 kg GVW: 3.500 kg Max. towing weight: 6.400 kg (unbraked 750 kg) Functional Make of bodywork: VW Condition Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Climate control - Heated door mirrors - Lane assist - Leaf spring suspension - Particulate filter Itedpfxswu Dqio Ag Rjn - Spare wheel - Speed limiter - Toolbox - Twin wheel axle = Remarks = Video working vehicle: Neat Volkswagen Crafter 2.0TDI BE Combi Semi-trailer: AWB BE Knikker Rack trailer/car transporter with articulated system Husky Superwinch with radio control Air springs adjustable in height at the rear GVW 3500 KG (BE driving license) Total train weight: 8750 KG Load capacity: 4920 KG Length of loading platform: 10 m Width: 2.30 m 177,000 KM demonstrable

Condition: excellent (used), functionality: fully functional, empty load weight: 11,700 kg, maximum load weight: 33,300 kg, overall weight: 48,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 07/2019, total length: 13,980 mm, total width: 2,550 mm, total height: 3,630 mm, suspension: air, tire size: 235/75R17,5, wheelbase: 1,310 mm, maximum speed: 90 km/h, color: orange, trailer brake: trailer braked, Year of construction: 2019, Equipment: ABS, MEUSBURGER MTS-3 Low loader trailer, single owner, workshop maintained, and in very good condition! New TÜV inspection, 3x BPW ECO axles with air suspension, 1 axle can be lifted, 3rd axle as a friction-guided trailing axle with electric and mechanical lock. Steering of the 3rd axle via two hydraulic cylinders to enable maneuvering using a remote control, Total weight (2-axle configuration) 48,000 kg, Total weight (3-axle configuration) 57,000 kg, Payload (2-axle configuration) 28,500 kg, Payload (3-axle configuration) 36,000 kg Fifth wheel load 18,000 kg, Rear axle load 30,000 kg, Unladen weight 11,700 kg, Overall width 2,550 mm, Length of gooseneck platform approx. 3,950 mm, front bevel approx. 500x56 mm, Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm, Loading height approx. 920 mm, Fifth wheel coupling height approx. 1,150 mm, Front outrigger supports, Hydraulic rear supports powered by an electro-hydraulic unit for the ramps, Distance between supports 1,310 / 1,410 mm, Central grease lubrication system with electric pump, LED work lights, Floor: Pressed grating 30/30/5 mm (hot-dip galvanized) over the entire loading area in the low bed, ramps, and on the upper platform, Ramps: 2-part ramps in special design with mechanical extension, length approx. 2,850 + 1,850 mm, with a maximum slope of 8°. Ramp width approx. 800 mm, can be slid together in the middle to approx. 50 mm. Hydraulically adjustable laterally to an overall width of 2,750 mm. Load capacity 25 tons. Ramp operation via hydraulic pump unit. Power supply via NATO socket, Iedpfxozv Iano Ag Retn Hydraulically liftable ramp on the gooseneck, approx. 3,450 mm long for accessing the upper bed over the entire vehicle width, with a load capacity of 10 tons, 4x PVC toolboxes 600/450/400 mm, Electric winch RUNVA 24 Volt, 8.0 tons pulling force, with steel cable 25m x 12 mm, with hook, incl. cable guide window and remote control, Total of 64 heavy-duty lashing rings (8 tons), Paint: RAL 2002 blood orange, Tires 235/75R17.5 13/13/13/13 mm 9/6/9/9 mm 10/10/10/10 mm, Upon request, leasing/financing options are available - quick processing, even without a down payment! More information and requirements on request. The vehicle description is for general identification of the vehicle only. The information, images and descriptions are without guarantee! Equipment must be checked separately if necessary. The seller assumes no liability for any typing and data transmission errors. Errors and prior sale are reserved. Thank you for your interest! We look forward to your visit. Our SERVICE: We will gladly accept your used vehicle in part exchange, Customs license plates for 30 days including insurance, EUR-1 + all customs documents for export, TÜV / SP / UVV / Tachograph inspection / OBU installation, Professional transport to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement, Retrofitting of additional attachments and other individual customer requirements possible by arrangement.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Itodpfx Aoza Aiyjg Rsn Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: used, empty load weight: 11,880 kg, maximum load weight: 49,920 kg, axle configuration: > 3 axles, first registration: 05/2026, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R17.5, color: grey, Year of construction: 2026, Equipment: ABS, tail-lift, Gooseneck: -Gooseneck with rear slope of approximately 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking, 30 mm thick Loading platform: -Loading platform in extendable design with rear slope of approximately 1,000 mm x 8° -5 pairs of lashing rings, foldable outwards (LC 5,000 daN) Iedjzp Ntvspfx Ag Retn -3 pairs of lashing rings, foldable outwards (LC 10,000 daN) -1 pair of lashing rings, horizontal at the front of the loading platform (LC 10,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) -Hardwood decking approximately 48 mm thick, with non-slip steel plate decking over the axles Ramps: -One pair of galvanized, two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood decking approximately 48 mm thick -Ramp with hydraulically extending and retracting ramp sections, hydraulic lifting system and hydraulically adjustable -Maximum load per pair: 40,000 kg Kingpin supports: -JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: -BPW axles, two axles fixed, two axles steered -Air-suspended, with drum brakes, with raising/lowering function -The trailing steered axles can be activated via electromagnetic reverse lock or manually -TPMS tire pressure monitoring system according to ECE R 141 -Tires 235/75 R17.5 Painting: -Blasting with corundum for optimal adhesion of the coating system -HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) -Final coating with 2 layers of 2K topcoat, solid color in DB 7350 Novagrau Included accessories: -On the gooseneck and at the rear, left and right, one bracket each for the warning signs, including socket -One spare wheel with bracket -2" kingpin -One galvanized steel front bulkhead, approximately 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of chock blocks with bracket -Galvanized folding supports under the slope of the loading platform -One bracket for a rotating beacon at the rear of the semi-trailer -Cover plates to bridge the gap between ramps and loading platform -White reflector tape according to EU regulations on the side and on the extension, red at the rear -Electro-hydraulic unit at the rear, under the loading platform -Control valves for the ramps mounted on the right side of the semi-trailer -One splash guard at the rear -European reflector signs (red-yellow) at the rear of the semi-trailer -Manual and description on a USB stick -Four extendable warning signs by approximately 400 mm, approximately 423 x 423 mm with a position light -On the gooseneck, ALU side and rear panels can be inserted, approximately 2,440 x 400 mm -The rear, galvanized, insertable end crossbars are removable (length of the superstructure approximately 2,560 mm) -4 pairs of WADER container pockets in the loading platform for 1x 20ft, 2x 20ft or 1x 40ft container -7 pairs of slot pockets for insertable crossbars 100 x 50 mm in the outer frame of the loading platform -Extensions, galvanized, extendable by approximately 230 mm on each side -Lift axle on the front axle with control via TEBS-E depending on the current axle load and the current load condition -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -On the non-slip steel plates on the gooseneck and on the loading platform, a painted layer of sand as an anti-slip coating -Central lubrication syst