Kalmar terminal tractor

Kalmar Terminal tractor / Terminal-Zugmaschine /

Condition: good (used), machine/vehicle number: 8068, tire size: 295/80 R 22.5, axle configuration: 4x2, wheelbase: 3,200 mm, color: grey, driver cabin: day cab, Year of manufacture: 2019 Tire size: 295/80 R 22.5 Technical condition: good Bedsxbnbvopfx Adwolp Optical condition: good Last inspection: 2025-03-12 Please contact Lastas Sales for further information.

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm Bjdpfxsiu Eu Ns Adwelp - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: excellent (used), functionality: fully functional, mileage: 411,000 km, first registration: 03/2012, fuel type: diesel, maximum load weight: 13,020 kg, overall weight: 26,000 kg, tire size: 315/70r22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: air, number of seats: 2, loading space length: 9,500 mm, loading space width: 2,550 mm, Equipment: ABS, AdBlue, air conditioning, cable winch, central locking, cruise control, differential lock, electric window regulation, power assisted steering, power mirror, retarder, seat heater, traction control, IVECO 260S36 LOW-BED/FLATBED 3-AXLE 6X2 for transport of cars, commercial vehicles, agricultural equipment, etc. REF: 12256 HORSEPOWER: 360 YEAR: 2012 KM: 411,000 EURO 5 EEV MANUAL GEARBOX + RETARDER FULL AIR SUSPENSION FLATBED: 9.50 x 2.55 m + hydraulically extendable ramps (1.80 m). HYDRAULIC WINCH LIFTABLE THIRD AXLE WITH INTELLIGENT HYDRAULIC STEERING REAR STABILIZERS GROUND CLEARANCE: 1.10 m Bljdox Ux H Sopfx Adwjp REMOTE CONTROL FOR RAMPS AND WINCH PAYLOAD CAPACITY: 13,020 KG Fitted with /70 tyres DIFFERENTIAL LOCK STEEL BUMPER AIR CONDITIONING CAB WITH REAR WINDOW CENTRALIZED DOOR LOCKING EXTERNAL SUN VISOR Vanzetto Industrial Vehicles Via Rovigana, 47/G 35043 Monselice (PD) Contact: Umberto Vanzetto We offer: TRUCKS, LORRIES, IVECO, MERCEDES, VOLVO, RENAULT, DAF, MAN, SCANIA, FIAT, DAILY, EUROCARGO, STRALIS, TRAKKER, TIPPERS, HOOK LIFTS, CURTAIN SIDERS, TAUTLINERS, PANEL VANS, BOX BODIES, FRIDGE TRUCKS, REFRIGERATED TRUCKS, VANS, INSULATED TRUCKS, FIXED BODIES, TRACTORS, TRAILERS, RIGID TRUCKS, DRAWBAR TRAILERS, SEMI-TRAILERS, CHASSIS, stralis 310, 330, 420, 450, 460, STRALIS 480, 500, eurocargo, 75, EURO CARGO 80, 90, 100, eurocargo 120, 140, 150, eurocargo 160, eurocargo 180, 190, eurostar, eurotech, eurotek, turbostar, cursor, moving floor, cranes, body equipment, curtain, refuse trucks, farid, compactors, tankers, tipper bodies, used, Italy, Monselice, Solesino, Padova, LOW-BEDS, FLATBEDS, CAR TRANSPORTERS, TRACTOR TRANSPORTERS, ROADSIDE ASSISTANCE, Veneto, for sale, commercial and industrial vehicles, for sale. RECOVERY VEHICLE / FLATBED / LOW-BED / MACHINERY TRANSPORTER

Condition: used, fuel type: diesel, mast type: telescopic, color: red, Reach stacker TEREX-Fantuzzi CS45KM for parts Minor fire damage to the engine compartment Year 2011 = Further information = Year of manufacture: 2011 Design year: 2011 Unladen weight: 75,720 kg Lifting capacity: 45,000 kg Overall condition: fair Bledpfx Aowr Dt Esdwep Technical condition: fair Visual condition: fair Price: On request Please contact Corne van Dueren den Hollander or Roland for further information.

Condition: used, axle configuration: > 3 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, Year of construction: 2026, Equipment: ABS,

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. Blodpfx Adeza Aiyowop 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: used, Year of construction: 2011, operating hours: 9,385 h, load capacity: 18,000 kg, lifting height: 3,540 mm, fuel type: diesel, construction height: 3,650 mm, tire condition: 50 %, front tire size: 16.00-25, rear tire size: 16.00-25, empty load weight: 29,590 kg, total length: 7,100 mm, color: other, Special equipment: Heater, full cab. Description of special equipment: Platform height: 1,670 mm. Bljdpfxezxt Uvo Adwep

Condition: good (used), Year of construction: 2016, operating hours: 15,995 h, lifting height: 5,000 mm, fuel type: diesel, power: 265 kW (360.30 HP), motor manufacturer: Diesel - Volvo TAD1171VE (TierIV), fork length: 1,800 mm, Front tires: 4 x 18.00-25 / Air / 20 - 40% Rear tires: 2 x 18.00-25 / Air / 40 - 60% In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - ... Leasing, hire purchase, and financing at fair terms are always possible for us. We would also be happy to buy your used machine outright, even if you do not purchase a vehicle from us. Call me, "Marco Levermann," and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way: Our forklift specialist workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Bedpfx Adezr Dx Sswjlp Side shift, fork positioner, 3rd valve, 4th valve = Further information = Lifting capacity: 45,000 kg Overall height: 490 cm Technical condition: good Optical condition: good Condition of front tires: 20 - 40% Condition of rear tires: 40 - 60% Front tires: 18.00-25 Rear tires: 18.00-25 Please contact Marco Levermann for further information.

Condition: used, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2000, suspension: air, tire size: 315/80R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, twin tires, stanchions Superstructure: Doll trailer for long timber transport 2x BPW axles, drum brakes, with cable remote control! Matching tractor unit with loading crane MAN TGS 26.540 6x4 BL available under -87583-! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bsdjufi Eiopfx Adwelp - .