Low loader semitrailer

MEUSBURGER 3-Achs Arbeitsbühnen-Tieflader klappbares Heck

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -closed outer frame with cut-outs for lashing straps (LC 1,500 daN) -steel floor covering with anti-slip coating -including perforated strip for aluminum docking lights -2" kingpin -Mechanically operated BPW seat posts -550 mm long, 8' chamfer at the gooseneck end -Front wall incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted upright on the front of the gooseneck -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -Aluminium plug-in drop sides 400 mm high, consisting of 2x drop sides, side length 3,150 mm and rear drop sides with stanchions (galvanized) -Rectangular storage box, aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, center -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, left -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, right Loading area, easily telescopic: Kdodpsi Ai E Rofx Afnon -closed outer frame with cut-outs for tension belts (LC 1,500 daN) -Fixed part at the front 700 mm Sheet metal floor covering with anti-slip coating -Angled interface between fixed section and loading area for attaching bridging rails and wheel recesses -Excavator trough incl. slotted holes for load securing (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -spars for widening to 3,000 mm -Sloping vehicle rear 8°, 550 mm long -Carriage design for easy attachment and removal of ramps -Continuous mud flap at the rear -1 pair of LC 10,000 daN lashing points in the middle of the cargo bed behind the gooseneck -7 pairs of LC 10,000 daN lashing points in the outer frame of the cargo bed -6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the cargo bed -1 pair of LC 10,000 daN lashing points in the center of the rear area of the cargo bed -1 pair of stanchion pocket strips approx. in the middle of the cargo bed -1 pair of stanchion pocket rails on the fixed part -1 pair of stanchion pocket rails behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wooden decking larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (disassembly) system Chassis: -axle make BPW ECO Max -2 ride heights -4 axles 10 t each (technically 12 t) -Twin tires 245/70 R17.5 -2 x rigid axle and 2 x friction-steered axle -Reverse steering lock on the friction-steered axle via reverse gear -Knorr brake system (in accordance with EU regulations with EBS-E) -TIM G2 from Knorr (trailer information module) -RSS (Roll Stability Support) driving stability control Load-dependent lift axle on the first axle incl. start-up aid (forced lowering of the lift axle possible via TIM) Accessories: -4 wheel chocks with holder 2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and plug-in position for rotating beacon, infinitely adjustable up to 3,950 mm -Fastening options on the gooseneck and on the loading area (alternatively on the ramp, if available) are included -pluggable bulkhead plate at the end of the excavator trough -Electro-hydraulic unit for ramp operation -Ramp operation via radio remote control -Hydraulic relief supports at the rear of the vehicle for support during the loading process -1 Pair of additional reversing lights rear switched to reverse gear -Wooden widening planks - larch (optional)

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Ksdpfx Afjvw Hmtjnsdn Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, color: black, total width: 2,250 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, tail-lift, MAN TGS 35.520 8x2-6 BL CH Basic Data - The new MAN Truck Generation - MAN Code: FPLOEBL5 - Euro 6e - Vehicle type: platform truck/chassis - Cab: TM (narrow, long, medium height) - Wheelbase: 4,105 mm - Rear overhang: 1,250 mm Weights (Permissible / Technical) - Gross weight: 32,000 kg / 34,500 kg - Front axle: 7,100 kg / 7,500 kg - Second front axle: 7,100 kg / 7,500 kg - Rear axle: 11,500 kg / 12,000 kg - Trailing axle: 7,100 kg / 7,500 kg Engine & Drive - Diesel engine: MAN D2676 LFBF, 382 kW / 520 HP, 2,650 Nm - MAN TipMatic 12.28 OD - Single-disc clutch 430 mm - High-performance engine brake MAN EVBec - MAN EfficientRoll - MAN Idle Speed Driving Axles & Suspension - Front axle: 9,200 kg, dropped, steered - Second front axle: 9,200 kg, dropped, steered - Rear axle: HY-1350, 13,000 kg - Trailing axle: 9,000 kg, steered, liftable - Axle ratio: i = 3.08 - Air suspension - Digital axle load display - Shock absorbers and stabilizers on all axles Tyres - FA/2nd FA/Trailing: Continental 315/60R22.5 EcoPlus HS3 - RA: Continental 315/60R22.5 Conti Hybrid HD3 - Rims: Alcoa Dura-Bright EVO, 9.00x22.5 - Tyre pressure monitoring system TPM Chassis - Longitudinal member thickness: 8 mm - Underrun protection: front, side, rear - Fuel tank: 300 l right, steel; AdBlue tank: 35 l right Electrics - 2x batteries 12 V / 210 Ah AGM - Alternator: 28 V / 120 A / 3,360 W - 24 V battery management system Brakes - Electronic braking system (EBS) - ABS - Full brake assist - Disc brakes on all axles - Electronic parking brake - Roll-away prevention MAN EasyStart Cab - Cab suspension: Comfort - Electric glass sunroof - Central locking with remote control - 4 vehicle keys - LED package Plus - High beam assist - Automatic driving light control - 2 LED beacon lights, yellow - Reverse warning device - Climatronic air conditioning - 4 kW auxiliary water heater - Lower bunk with slatted frame - Leather multifunction steering wheel - Professional 12.3" instrument cluster - Digital tachograph with remote download - MAN Media System Professional Navigation 12.3" - Advanced sound system with subwoofer Seats - Premium driver's seat package, air-suspended, heated - Passenger seat: non-suspended, adjustable Assistance Systems - ESP - ASR - Cruise control ACC Stop & Go - Emergency brake assist EBA - Lane departure warning LDW - Lane change and turn assist (LCS) Kdodpfxoygzrmo Afnon - Attention monitor MAN AttentionGuard - Front detection - Traffic sign recognition - Reversing motion system Interfaces - 2-line trailer brake connection - 15-pin trailer socket - ABS socket - Body power supply interface - FMS interface - PTO with transmission dependency, type NH4c Paintwork - Cab topcoat: RAL 9010 Pure White - Topcoat on door extensions and entry steps - Topcoat on mudguards - Topcoat on bumper WIESE Body for Aerial Work Platform and Construction Machinery Transport Body dimensions - Length: approx. 9,050 mm usable length - Width: approx. 2,550 mm - Loading height: approx. 1,050 mm unladen Subframe - Weight-optimized steel welded construction - Longitudinal and cross members made from laser-cut special profiles - Short cross member spacing for high point loads - Rear end sloped for low ramp angle - Outer frame profile 90° with lashing holes for tie-down straps Headboard & Floor - Reinforced headboard, 200 mm below top edge of cab - 2 outer stakes + 2 centre supports - Storage box

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine transporter/platform lift transporter - FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - FH high safety long-distance cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment under the bunk - Air suspension on front axle(s) - Transmission/I-Shift operation via control unit on driver's seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control) including brake cruise - Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency braking - Lane keep assist - Side collision avoidance and turning assistant (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for platform lift and construction machinery transport with hydraulic loading ramps Includes 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Length approx. 9,050 mm useable length - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, box section design - Short crossmember spacing for high point loads - Rear end tapered for low approach angle - Outer frame profile 90° - Front bulkhead reinforced version - Storage box inside front lower area - Grated floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame - Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t - 4 lashing points 8 t recessed at rear (left/right/center/center) - 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Kdsdpfxow Itmlj Afnen Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable ramps, both ramps laterally adjustable - Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay - Sturdy locking bar as transport security (optionally with belt system) - 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab - Ramp and support operation by electro-hydraulic system - Control via wireless remote and emergency controls on manifold - Control manifold mounted in stainless steel toolbox on chassis side - Superwinch winch 8.2 t with approx. 20 m steel cable - Access steps with handrail right and left for deck access - 5 stainless steel toolboxes in drawer version, with lighting as optional extra - Side skirts as per sample photos (green vehicle) as optional extra - Body coating KTL - Ball-type trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights on outer chassis as perimeter lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).

Condition: like new (used), functionality: fully functional, mileage: 343,000 km, first registration: 03/2018, fuel type: diesel, maximum load weight: 18,000 kg, overall weight: 32,000 kg, tire size: 315/70R22.5, axle configuration: 8x2, fuel: diesel, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 9,400 mm, loading space width: 2,550 mm, Equipment: ABS, AdBlue, USB port, air conditioning, cable winch, central locking, cruise control, differential lock, electric window regulation, hill-start assist, lane keeping assist, power assisted steering, power mirror, retarder, seat heater, traction control, IVECO 320S42 LOWBED/FLATBED 4 AXLES 8x2 for the transport of cars, commercial vehicles, agricultural machinery, etc. ID CODE: 12282 HORSEPOWER: 420 YEAR: 2018 MILEAGE: 343,000 KM EURO 6 AUTOMATIC TRANSMISSION + INTARDER FULL AIR SUSPENSION FLATBED DIMENSIONS: 9.40 x 2.55 meters + hydraulically extendable ramps (2 meters). Ksdpox U Auaofx Afnsdn HYDRAULIC WINCH with 6,800 kg capacity, 14mm cable diameter. SECOND AND FOURTH AXLE LIFTABLE + STEERABLE REAR STABILIZERS GROUND CLEARANCE: 1.10 – 1.16 meters REMOTE CONTROL FOR RAMPS + WINCH REVERSING CAMERA EXCELLENT TYRES! PAYLOAD: 18,000 kg Fitted with /70 tyres DIFFERENTIAL LOCK STEEL BUMPER AIR CONDITIONING CAB WITH REAR WINDOW CENTRALIZED DOOR LOCKING EXTERNAL SUN VISOR ACCESS LADDER TO FLATBED Vanzetto Industrial Vehicles Via Rovigana, 47/G 35043 Monselice (PD) Contact: Umberto Vanzetto We stock: Trucks, IVECO, MERCEDES, VOLVO, RENAULT, DAF, MAN, SCANIA, FIAT, DAILY, EUROCARGO, STRALIS, TRAKKER, TIPPERS, HOOKLIFTS, CURTAIN SIDED, CANVAS, PANEL VANS, BOX BODIES, FRIDGE TRUCKS, VANS, INSULATED, REFRIGERATED, FIXED BODY, TRACTORS, TRAILERS, TRUCKS, TANDEMS, SEMITRAILERS, CHASSIS, Stralis 310, 330, 420, 450, 460, STRALIS 480, 500, eurocargo, 75, EURO CARGO 80, 90, 100, eurocargo 120, 140, 150, eurocargo 160, eurocargo 180, 190, eurostar, eurotech, eurotek, turbostar, cursor, moving floor, crane, setups, tautliners, waste, farid, compactor, tanker, tipper, used, Italy, Monselice, Solesino, Padova, LOWBEDS, FLATBEDS, CAR TRANSPORTERS, TRACTOR TRANSPORTERS, ROADSIDE ASSISTANCE, Veneto, for sale, commercial and industrial vehicles, for sale. RECOVERY TRUCK / FLATBED / LOWBED / MACHINERY TRANSPORT.