Telehandler

Manitou MRT 2150 Privilege Tüv S2

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle Redpfx Abek Af Svsnou -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches Rodpfxergzv No Abnou * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions Rsdpfxjwg N N Ie Abnju - Dimension b: 18,765 mm - Overall train length: 24,165 mm - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering

Condition: used, power: 74.5 kW (101.29 HP), fuel type: diesel, color: red, lifting power: 4 kg/m, lifting height: 14,000 mm, tire size: 15.5 / 80 - 24, tire condition: 98 %, mast type: telescopic, Year of construction: 2007, operating hours: 1,048 h, Equipment: all wheel drive, cabin, pallet forks, Off-road - telescopic arm forklift MANITOU, type: MT 1440 SLT ULTRA TURBO Series III-E2 - 4x4x4, first use: 2008, LIFTING FORCE: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG LOADING FORKS - QUICK CHANGER, ADDITIONAL HYDRAULIC, LOAD PROTECTION GRID, 4-cylinder PERKINS TURBO-Diesel engine (101.32 HP / 74.50 kW at 2.200 rpm), RADIO REMOTE CONTROL, ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVING, hydraulic outriggers (2x / WIDE), SIDE-BALANCE CONTROL, CPB, OVERLOAD WARNING DEVICE, large driver's cab (colored glass), KAB - comfort seat, ROPS / FOPS, traffic lights, WORKING LIGHTS (front/rear), WARNING LIGHTS, exterior mirrors (2x), windshield wipers (2x), heating / ventilation, trailer coupling, retaining and transport eyes. Tires: BKT OFF-ROAD TIRES (15.5/80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without fork), width: approx. 2,440 mm, height: approx. 2,560 mm. Price is net export, plus VAT in Germany. ∗∗∗ FINANCING POSSIBLE / TRANSPORT FAVORABLE (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE IS TO BE PAID (!) ∗∗∗∗ © pb - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 1440 SLT TURBO ULTRA Serie III-E2 - 4x4x4, first use: 2008, LIFTING FORCE: 4.000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS - QUICKCHANGER, ADDITIONAL HYDRAULIC, PROTECTION LOAD GUARD, 4-cylinder PERKINS TURBO-diesel engine (101.32 PS / 74.50 kW at 2.200 rpm), REMOTE CONTROL, FOUR-WHEEL-DRIVE and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), hydraulic supports (2x / BIG SUPPORTS), SIDE - EQUALISE - SYSTEM, OVERLOAD PROTECTION SYSTEM, big driver house (colorglass), CPB, KAB - comfort seat, ROPS / FOPS, road lightnings, WORKING FLOOTLIGHT (in front/behind), WARNING LIGHT, back view mirror (2x), windshield wiper (2x), follower coupling, heating / ventilation, hold- and transport hooks. Tyres: BKT ROUGH-TERRAIN-TYRES (15.5/80 - 24) - all around approx. 98%. Transport dimensions: see above. Price is net. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all European countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Rodpfsuiyqdjx Abneu

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,200 kg, permissible axle load (axle 2): 11,200 kg, permissible axle load (axle 3): 11,200 kg, loading space length: 14,600 mm, loading space width: 2,550 mm, loading space height: 880 mm, total length: 14,600 mm, total width: 2,550 mm, total height: 880 mm, suspension: air, tire size: 245 / 70 R17.5, color: blue, Year of construction: 2008, Equipment: tail-lift, Color: Blue Loading capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity Fifth-wheel load: 26,000 kg Axle load: 11,200 kg Total axle load: 6x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle brand: BPW Air suspension 1st axle rigid Axles 2 - 6 with hydraulic steering 1st & 2nd axles liftable High/low valve Braking system: WABCO Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Maximum extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm - 925 mm Fifth-wheel height: +/- 1,350 mm Additional Information • PTO operated from truck • Lashing rings • Stake pockets • Partially wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king-pin • Central lubrication • "Oversize load" marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle Configuration Tyre size: 245 / 70 R17.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; max. axle load: 11,200 kg Rear axle 2: Twin tyres; lift axle; max. axle load: 11,200 kg; steered Rear axle 3: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 4: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 5: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 6: Twin tyres; max. axle load: 11,200 kg; steered Rodex R Undspfx Abnju Weights Unladen weight: 20,600 kg Payload: 72,600 kg Gross vehicle weight: 93,200 kg Functional Body brand: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: used, power: 74.5 kW (101.29 HP), fuel type: diesel, color: red, lifting height: 18,000 mm, tire size: 15.5 - 25, tire condition: 98 %, mast type: telescopic, Year of construction: 2011, operating hours: 2,847 h, construction height: 2,540 mm, fork length: 1,200 mm, fork carriage width: 1,200 mm, load capacity: 4,000 kg, Equipment: all wheel drive, cabin, pallet forks, Rough terrain telescopic forklift MANITOU, model: MT 1840 EP PRIVILEGE TURBO – 4x4x4. First commissioned: 2012. LIFTING CAPACITY: 4,000 kg, MAX. LIFTING HEIGHT: 18.00 m. Includes RADIO REMOTE CONTROL, EMERGENCY LOWERING, EXTRA-LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,200 mm), ADDITIONAL HYDRAULICS, LOAD PROTECTION GRILL, 4-cylinder PERKINS diesel engine (101.32 HP / 74.50 kW at 2,200 rpm), CPB, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) with CRAB STEERING mode, dual hydraulic stabilizers, SIDE-SHIFT ADJUSTMENT, OVERLOAD WARNING SYSTEM, PANORAMIC CABIN (large operator cab) – tinted glass, ROPS / FOPS, GRAMMER comfort seat, trailer hitch, WORK LIGHTS (front/rear), road lighting, WARNING BEACON / REVERSE ALARM, three windshield wipers, dual exterior mirrors, heater/ventilation system, OPERATOR’S MANUAL (German). Tyres: BKT OFF-ROAD TYRES (15.5 – 25) – approx. 98% tread remaining. Transport dimensions: Length: approx. 7,420 mm (approx. 6,100 mm without forks), width: approx. 2,400 mm, height: approx. 2,540 mm. Financing available / Competitive worldwide transport / For export, only net price is payable. Rjdsuiwv Ropfx Abnju

Condition: excellent (used), first registration: 08/2008, color: green, Year of construction: 2008, Extendable body: Yes Rodpoykz Uiefx Abneu Technical condition: very good Visual condition: very good

Condition: used, Year of construction: 2018, operating hours: 907 h, lifting height: 18,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,540 mm, power: 55.4 kW (75.32 HP), fork carriage width: 1,100 mm, fork length: 1,200 mm, tire condition: 98 %, total length: 7,420 mm, color: red, lifting power: 4 kg/m, fuel: diesel, Equipment: all wheel drive, cabin, lighting, pallet forks, trailer coupling, Off-road - MANITOU telescopic arm forklift, type: MT 1840 ST3B TURBO - 4x4x4, first use: 2019, LIFTING FORCE: 4,000 kg, LIFTING HEIGHT: 18.00 m, LONG LOADING FORKS (Fork length: 1.200 mm / pick-up width: 1,100 mm) - ADDITIONAL HYDRAULIC, LOAD PROTECTION GRID, QUICK CHANGER, 4-cylinder DEUTZ turbo diesel engine (type: TD 3.6 L4 - 75.34 hp / 55.40 kW at 2.200 rpm), CPB, ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVING, hydraulic outriggers (2x), SIDE LEVEL - REGULATION, OVERLOAD WARNING DEVICE, PANORAMIC CAB (large cab) - Colorglas, ROPS / FOPS, KAB - comfort seat, trailer coupling, traffic lights, windshield wipers (2x), exterior mirrors (2x), WARNING SOUND / WARNING LIGHT, heating / ventilation, OPERATING INSTRUCTIONS (in German). Tires: BKT OFF-ROAD TIRES (15.5/80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 7,420 mm (approx. 6,100 mm without fork), width: approx. 2,400 mm, height: approx. 2,540 mm. ∗∗∗ FINANCING POSSIBLE / TRANSPORTATION CHEAP (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE HAS TO BE PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 1840 ST3B TURBO - 4x4x4, first use: 2019, LIFTING FORCE: 4.000 kg, LIFTING HEIGHT: 18.00 m, LONG FORKS (fork length: 1.200 mm / width admission: 1.100 mm) - ADDITIONAL HYDRAULIC, PROTECTION LOAD GUARD, QUICK CHANGER, 4-cylinder DEUTZ turbo-diesel-engine (type: TD 3.6 L4 - 75.34 PS / 55.40 kW at 2.200 rpm), CPB, FOUR-WHEEL-DRIVE and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), hydraulic supports (2x), SIDE - EQUALISE - SYSTEM, OVERLOAD PROTECTION SYSTEM, PANORAMIC-CABINE (big driverhouse) - colorglass, ROPS / FOPS, KAB - comfort seat, follower coupling, road lightnings, windshield wiper (2x), back view mirror (2x), WARNING RING / WARNING LIGHT, heating / ventilation, OPERATION MANUAL (in German). Tyres: BKT ROUGH-TERRAIN-TYRES (15.5/80 - 24) - all around approx. 98 %. Transport dimensions: see above. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all European countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Rsdpjr Nvykefx Abneu

Condition: used, functionality: fully functional, empty load weight: 16,300 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: other, tire size: 205/65 R 17,5, color: green, Equipment: ABS, EBS, - 5 axles: 1st axle friction-steered and liftable; 2nd–5th axle hydraulically steered - Extendable: 6,200 mm (total length: 12,800 mm – 19,000 mm) - SAF axles - Sliding hydraulic double ramps with support legs - Lifting and lowering device Redoymnmwspfx Abnsu - Drum brakes - Suspension: air-lift Errors and omissions excepted.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 14 kg, permissible axle load (axle 2): 14 kg, permissible axle load (axle 3): 14 kg, loading space length: 21,200 mm, loading space width: 2,750 mm, loading space height: 1,240 mm, total length: 21,200 mm, total width: 2,750 mm, total height: 1,240 mm, suspension: hydraulics, tire size: 285 / 70 R19.5 (150/148J), color: blue, Year of construction: 2012, Colour: Blue Payload: 110,550 kg Extendable Main Features Manufacturer: Goldhofer Model: THP / XLE 8 (3+5) Low Loader Chassis number: WG0THPX57B0030736 Gooseneck VIN: WG0SH0005B3030736 XLE 3 VIN: WG0XLE034B0035242 XLE 5 VIN: WG0THPX57B0030736 Year of manufacture: 2012 Weights / Loading Capacity King-pin load: 27,000 kg Axle load: 14,000 kg Total axle load: 8 x 14,000 kg = 112,000 kg Gross vehicle weight: 139,000 kg Unladen weight: 28,450 kg Payload: 110,550 kg Axles BPW pendle axles Redpfxjxx Sv Es Abneu Axle spacing: 1,360 mm / 1,400 mm EBS/ABS Tyres: 285 / 70 R19.5 (150/148J) Hydraulic steering and suspension Radio remote control Dimensions Overall length: 21,200 mm Loading platform length: 6,000 mm Loading platform extension: 8,500 mm Max. loading platform length: 14,500 mm Loading platform height: 450 mm Ground clearance: 200 mm Platform width: 2,750 mm / 3,250 mm Bogie width: 2,750 mm Bogie height: 1,240 mm (+/- 300 mm) Excavator boom recess: 700 mm Additional Information Hydraulically operated via truck PTO 3.5” king pin Central greasing system Remote-controlled operation Detachable gooseneck Hydraulic quick-release couplings Marker boards for oversized loads Work lamps Amber warning beacon Loading ramps at floor level Extra tables for platform extension = Further Information = General Information Year of manufacture: 2012 Axle Configuration Tyre size: 285 / 70 R19.5 (150/148J) Axle brand: BPW Suspension: Hydraulic suspension Middle axle 1: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Middle axle 2: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Middle axle 3: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Rear axle 1: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Rear axle 2: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Rear axle 3: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Rear axle 4: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Rear axle 5: Twin tyres; Lift axle; Max. axle load: 14 t; Steered Weights Unladen weight: 28,450 kg Payload: 110,550 kg Gross weight: 139,000 kg Condition Technical condition: good Visual condition: good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more details.