Low loader semitrailer

FAYMONVILLE

Condition: used, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 02/2012, Year of construction: 2012, Equipment: ABS, * Faymonville STN-4UBX low-bed trailer * First registered: 02-2012 * Hydraulic lifting system * Hydraulically adjustable double folding ramps * Including winch with remote control Hnjdpszuraiofx Alyor * 3rd and 4th axles with trailing steering * SAF axles * Air suspension * Drum brakes * Payload: 11,900 kg * Tires 235 / 75 R 17.5 * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: good (used), functionality: fully functional, overall weight: 57,600 kg, axle configuration: 3 axles, loading space length: 7,240 mm, loading space width: 2,750 mm, loading space height: 945 mm, color: blue, Year of construction: 2008, We have two of these lowbed trailers available Manufacturer: Goldhofer Type: STZ-VKL 3-34/80 A Year: 2008 Total weight: 54,000 kg Own weight: 21,000 kg Payload: 33,000 kg Hnsdpfexc U Nvox Alyor Overall train length: 20,000 mm (max. telescoped 24,200 mm) Loading area (LxW): 7,300 mm x 2,750 mm (telescopic up to 4,200 mm) Tires: 235/75 R 17.5 Extra: Extension beam: 2x 6,000 mm

Condition: used, color: blue, Year of construction: 2016, Faymonville F-S43-1ABA. Year: 2016. 10-ton SAF axles. Maximum weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering on 3 steering axles. Air suspension. Winch. EBS ABS ALB. Hydraulic system operates on Duplo electricity. Hydraulic bridge extending from floor to neck. Length: 3,000 mm. Central lubrication system. 2-point hydraulic outriggers at the rear. 2-way hydraulic ramps: - Hydraulic operation from left to right. - Length: 2,800 + 1,700 mm. Dimensions: Neck: L: 3,800 mm. W: 2,480 mm. Hnedpfjztw Rdox Alyor H: 1,400 mm. Kingpin load: 1,150 mm. Floor: L: 9,600 mm. W: 2,550 mm. H: 900 mm. Tires: 235/75R17.5, 70% tread remaining. German trailer! ID No.: 449. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2016 GVWR: 42,000 kg = Company information = For more information:

Condition: used, color: green, Year of construction: 2015, Faymonville F-S44-1ACA. Year: 2015. 10-ton SAF axles. Weight: 22,250 kg. Load capacity: 57,750 kg. Maximum weight: 80,000 kg. Kingpin load: 40,000 kg. EBS ABS ALB. Hydraulic system operates via the truck's NATO socket. Allu boards on the gooseneck. Hydraulic detachable gooseneck. Air suspension. 5-meter extendable. Radio remote control. Excavator bridge: 5600 mm x 950 mm. Tires: 235/75R17.5, 80% remaining. Dimensions: Neck: Length: 4900 mm. Width: 2500 mm. Height: 1800 mm. Kingpin height: 1300 mm. Floor: Length: 8000 mm. Width: 2750 mm. Height: 500 mm. Floor thickness: 300 mm. Rear trailer: Length: 5600 mm. Width: 2750 mm. Height: 1050 mm. Hnedpfxjztw D Rs Alyjr Dolly D-2. Year: 2015. 10-ton SAF axles. Weight: 3650 kg. Maximum weight: 36,100 kg. Kingpin load: 16,100 kg. Air suspension. Tires: 235/75R17.5, 70% remaining. German trailer! 4 units available! ID No.: 552. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2015 Unladen weight: 22,250 kg Payload: 57,750 kg Permissible total weight: 80,000 kg Extendable: Yes Price: On request = Company Information = For more information:

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table Hnedpfxjk Af Sve Alyjr -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, axle configuration: 3 axles, first registration: 04/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, suspension: air, tire size: 245/70R17.5, color: grey, Year of construction: 2019, Faymonville F-S43-1AAF 660 cm Extendable Hydraulic ramps Winch Forced steering Hnjdpszinblefx Alyer = Further information = Tire size: 245/70R17.5 Suspension: Air suspension Front axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Center axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Unladen weight: 13,500 kg Payload: 47,500 kg GVWR: 61,000 kg Model number: F-S43-1AAF / EXTENDABLE / HYDRAU = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, tire size: 235/75R17,5, color: blue, Year of construction: 2005, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Hodpsztbllefx Alyjnr The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of manufacture: 2005 Axle Configuration Tire size: 235/75R17.5 Axle brand: BPW Rear axle 1: Double tires; Max. axle load: 10,500 kg; Steerable; Tire tread depth, left inner: 70%; Tire tread depth, left outer: 70%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Rear axle 2: Double tires; Max. axle load: 10,500 kg; Steerable; Tire tread depth, left inner: 70%; Tire tread depth, left outer: 70%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Rear axle 3: Double tires; Max. axle load: 10,500 kg; Steerable; Tire tread depth, left inner: 70%; Tire tread depth, left outer: 70%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Rear axle 4: Double tires; Max. axle load: 10,500 kg; Steerable; Tire tread depth, left inner: 70%; Tire tread depth, left outer: 70%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Weights Unladen weight: 15,000 kg Payload: 45,000 kg GVWR: 60,000 kg Condition Technical condition: good Optical condition: good = Company Information = For more information:

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 Hsdergzv Nspfx Alyonr * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10-ton SAF axles. Weight: 12,300 kg. Load capacity: 29,700 kg. Maximum weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering on 3 steering axles. Slotted floor. Winch. Aluminum boarding on the neck. Hydraulic system from trailer operates with NATO connectors. Radio remote control. Air suspension. Hydraulic bridge from floor to neck. Length: 3,000 mm. 2-point hydraulic outriggers at the rear. 2-way hydraulic ramps: Length: 2,800 + 1,700 mm. Dimensions: Neck: L: 3,750 mm. W: 2,500 mm. H: 1,380 mm. Kingpin height: 1,150 mm. Floor: L: 9,600 mm. W: 2,550 mm. H: 900 mm. Tires: 245/70R17.5, 80%. ID No.: 676. Hjdpfeztbkzex Alysnr The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2013 Unladen weight: 12,300 kg Payload: 29,700 kg GVWR: 42,000 kg = Company information = For more information:

Condition: used, machine/vehicle number: YAFSR31200001xxxx, Year of construction: 2012, Please provide reference number upon request: 23457 Specifications: 2012 model 3 axles Length: 1325 cm Net weight:12,178 kg Permitted total weight: 59,000 kg 12 ton axles Swing on all axles Ready for delivery   Description: 2012 Faymonville telemax flatbed semi trailer with 27 meter extension. The extension is 14 meters. Ready for delivery. Technical approved: Yes EU-approved until: 28.02.2027 Own weight: 12178 Hnsdpezqlx Rofx Alyer Total Weight: 59000 Model: telemax flatsemi henger m/ 27 meter uttrekk = More information = Please contact ATS Norway for more information

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Hnedpokqmuujfx Alyer Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: used, maximum load weight: 25,260 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt of Equipment: Load area: Low-bed with central beam in extendable design, length approx. 6,750 mm. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 1 pair of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the rear in the loading area (LC 10,000 daN). The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck: Gooseneck, length approx. 3,900 mm. Gooseneck can be hydraulically raised/lowered and extended. Technical saddle load: 23,000 kg. Rear axle: Rear axle in short design with closed outer frame and diamond plate cover. Axle with excavator trough, which is closed in the rear half to accommodate the air tanks. 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 1 pair of lashing rings that can be folded outwards (LC 10,000 daN). Axles: BPW axles, hydro-mechanically forced steering. Technical axle load: 12,000 kg each. Air suspension with raise and lower valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF – Manufacturer of our choice. Load index (146/146F). Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa). S690QL/S700MC (yield strength 690 MPa). Paint: High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red. Includes the following additional equipment: - 2-inch kingpin. - One galvanized steel front bulkhead, approx. 400 mm high. - One spare wheel holder in front of the bulkhead. - Yellow-red air couplings on the galvanized connection strip at the front. - 4 wheel chocks with holder (± 5 kg). - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle control (without installation in the tractor unit). - Electro-hydraulic unit (± 45 kg). - Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. - 1 wooden block, approx. 500x250x200 mm. - Mounting rail for aluminum loading ramps at the rear of the vehicle. - One holder for a rotating beacon at the rear of the trailer. - One mud flap at the rear of the trailer. - European reflector signs (red-yellow) at the rear of the trailer. - On the gooseneck and at the rear panel on the left and right, one holder each for the warning signs, including socket. - Manual and instructions on a USB stick. - Speed sticker 80 km/h at the rear and on both sides. - Load manometer for determining the axle loads including load diagram. Includes special accessories: On the gooseneck, aluminum side boards and rear panel, pluggable, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in supports are removable (length of the superstructure approx. 2,560 mm) (± 46 kg). On the gooseneck, a separate air connection with an air gun. 2 work spotlights with switch on the trailer, mounted on the left and right on the gooseneck platform. 6 pairs of rung pockets for plug-in supports, approx. 100 x 50 mm in the outer frame of the loading area, 2 pairs in the outer frame of the axle (± 29 kg). Hedpfjzdxlkex Alyonr Extensions galvanized, extendable by approx. 230 mm on each side (± 262 kg). Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. Central lubrication system with 2 pumps BEKAMAX (Pico) with normal grea

Condition: used, color: red, Year of construction: 2015, Faymonville F-S43-1A1Y. Year: 2015. 9-ton SAF axles. Weight: 10,190 kg. Maximum weight: 45,000 kg. Kingpin load: 18,000 kg. 5.75m extendable. Power steering, 3x forced steering. Hydraulic system powered from the trailer, operates on NATO electricity. Air suspension. 1st axle is a lift axle. Dimensions: Floor: Length: 13,750 mm. Width: 2,550 mm. Height: 1,400 mm. Height (with aluminum boards): 600 mm. Tires: 385/65R22.50, 70% tread remaining. ID No.: 661 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2015 Unladen weight: 10,190 kg Payload: 34,810 kg Hjdpfx Aszr Nmhslysnr GVW: 45,000 kg Extendable platform: Yes = Company Information = For more information:

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Hnsdsg Sk T Djpfx Alysr Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: used, empty load weight: 10,900 kg, maximum load weight: 27,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2023, suspension: air, tire size: -, Year of construction: 2023, Equipment: ABS, ref: VO26-2220 SYLTRAILER FOR SALE? Faymonville F-S43-1AAF Lowboy Trailer? 3 Axles? 2023 - GENERAL INFORMATION Make / Model: Faymonville F-S43-1AAF Type: Lowboy trailer Year: 2023 Color: Black Chassis number: YAFTL3002P003 - TECHNICAL SPECIFICATIONS Number of axles: 3 Suspension: Air suspension - Hsdjzrzm Tspfx Alysnr WEIGHTS & CAPACITIES Unladen weight: 10,900 kg GVWR: 38,000 kg (Other GVWR: 61,000 kg) - EQUIPMENT Hydraulic loading ramps Air suspension High-strength, low chassis Reinforced deck for heavy equipment Pneumatic braking system with ABS / EBS Numerous integrated lashing points - HIGHLIGHTS Faymonville F-S43-1AAF 2023 3 axles Air suspension Hydraulic ramps High-strength reinforced chassis Unladen weight: 10,900 kg GVWR: 38 tons (Other GVWR: 61 tons) ---- Price: Please inquire Delivery time (in days): 1 ABS Serial number: YAFTL3002P003