Tele low-loader semi-trailer ramps

NOOTEBOOM MCO-73-04V Tele-Tieflader Rampen 4-Achs

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Gtedpfx Afsk Af Sve Sou Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation Gtedpfxergzv Ns Af Sju * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2025, 3-axle MULTIMAX *PLUS semi-trailer low loader, air-suspended and hydraulically forced steered axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Total weight: 49500 kg 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin turning radius to the rear approx.: 2,100 mm Fifth wheel height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: * Loading area width approx.: 2,540 mm Loading height with max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm *Total weight depends on the fifth wheel load: Yes Special permit required if the country-specific legislation is exceeded: Technical description Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,900 mm, with a bevel at the rear approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading area: Loading area, length approx. 9,600 mm with a bevel at the rear approx. 900 mm x 6°. Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps with a length of approx. 4920 mm and a width of approx. 900 mm. Open grating surface. Ramp tips that can be opened hydraulically. Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load and ramp angle according to technical data sheet: C470319 Maximum incline angle with lowered loading area: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF twin tires. Make of our choice Load index 143/141J (144/144F) Brake system: WABCO EBS-E brake system in accordance with EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Version in accordance with EU regulations. (ASS 3) Metallization Complete HRM metallization (High Resistance Metallization) Complete steel construction shot blasted, then hot-finished with ZINACOR 850 (zinc 85% - aluminum 15%). Paint 6-K final treatment: Complete steel construction shot blasted after welding. 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-component paint (acrylic) in a single color in RAL colors of your choice, then sealing the cavities with special wax. Rims in silver. Multi-color and special painting for an additional charge. Steel construction: Steel construction made of high-strength fine-grain steel. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) Gtjdpoizu Ntjfx Af Seu S690QL/S700MC (yield strength 690MPa) Welder tested according to DIN-EN 287-1. MAG welding process according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 iFront wall made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM, attached at the height of the outer frame profile. i ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets 24N connection in accordance with ISO-1185 24S connection in accordance with ISO-3731 15-pin connection in accordance with ISO-12098 If your pin assignment differs from the ISO connection standard, please let us know. i "Anderson"

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles Gjdpfowg N N Iox Af Sjtu The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions - Dimension b: 18,765 mm - Overall train length: 24,165 mm - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering

Condition: used, functionality: limited functionality, power: 43.39 kW (58.99 HP), fuel type: diesel, Year of construction: 2004, Telescopic boom Gjdpex A S Enjfx Af Sstu including bucket package Cabin defective, see photos!! otherwise fully functional

Condition: used, empty load weight: 28,700 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, first registration: 07/2009, next inspection (TÜV): 05/2026, tire size: 285/70 R19,5, color: yellow, Equipment: ABS, Drum brake EBS Payload 69,300 kg Mercedes-Benz Arocs 2663 LS heavy-duty tractor unit Color: yellow 591,100 km Gtjdpfxox Nqibe Af Ssu Roadworthiness inspection (HU): 09/2026 Diesel Urea tank (AdBlue) First registration: 09/2017 Displacement: 15,569 cc 460 kW ABS On-board computer Differential lock Hydraulics (PTO) Tipper hydraulics Lane assist EBS ESP Low noise Navigation system Parking heater Stationary air conditioning Cruise control Traction control Additional headlights Euro 6 C 3 axles Wheelbase: 3,400 mm Tire size: 385/65 R22.5 - 315/80 R22.5 Perm. total weight: 26,000 kg Payload: 15,425 kg Unladen weight: 10,575 kg Retarder Fully automatic transmission Leaf-air suspension Turbo retarder clutch Technically possible gross combination weight: 70,000 kg at 12% / 100,000 kg at 8% Engine-side PTO Sun visor Beacon lights Air horns Air-suspended cab 1 bunk VIN: 10167342 Subject to errors and omissions.

Condition: new, machine/vehicle number: 14090, Year of construction: 2024, operating hours: 1,153 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,900 mm, construction height: 2,900 mm, fork length: 1,200 mm, front tire size: 445/70 R22.5, rear tire size: 340/80 R18, overall weight: 8,436 kg, enginetype: Diesel, manufacturer: Manitou Gedsw Ayv Repfx Af Sotu

Condition: used, machine/vehicle number: YV2AP90D2BA70xxxx, mileage: 300,000 km, Year of construction: 2011, Please provide reference number upon request: 22386 Specifications: Mileage: 300,000 km Transmission: Automatic Retarder Euro 5 – 700 hp Full steel suspension 6x4 3.5" fifth wheel Tipping semi-hydraulics Good tyres Light bar Sleeper cab Radio/CD Climate control / AC Gtjdpfxeyhyq Us Af Ssu Services carried out by owner Ready for delivery Description:2011 Volvo FH16 700 6x4 tractor unit.Heavy-duty specification with 3.5" fifth wheel. Ready for delivery. Km: 300000 HK: 700 Technical approved: no EU-approved until: 20.09.2025 Own weight: 10520 Total Weight: 35000 Payload: 24405 Width: 255 Length: 695 Euro: 5 Model: FH16 700 6x4 Tungtrekker – Leveres Godkjent – 300 000 km Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, maximum load weight: 38,700 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 06/2012, next inspection (TÜV): 03/2026, loading space length: 12,000 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2012, Equipment: ABS, * 3rd & 4th axle rear-steering Godpfxeyc Rhpj Af Sotu * Two-piece hydraulic loading ramps * Hydraulic rear support ----* Wabco Trailer EBS-E * SAF twin-tire axles with disc brakes ----* 2 x storage boxes * Work lights * Spare wheel * Gooseneck (3.3m x 2.55m) * Lowbed (8.7m x 2.55m) -----* Tire size: 235/75R17.5 * Technical gross weight: 61,000 kg (with special permit) * Curb weight: 11,300 kg * Total length: 12,450 mm * General inspection due: 09/2026 ----Vehicle number: 11748----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/inspection approval * Complete export processing * Financing brokerage * Application for export plates * Vehicle transfer logistics * Vehicle registration * Recovery and transport of vehicles ----YOUR VTS TEAM

Condition: used, axle configuration: 3 axles, first registration: 01/2010, total length: 13,140 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R 17.5, wheelbase: 9,010 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Lift axle = Further information = Axle configuration Tire size: 245/70 R 17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steered; Tire tread depth left inside: 20%; Tire tread depth left outside: 20%; Tire tread depth right inside: 20%; Tire tread depth right outside: 20% Rear axle 2: Twin tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Rear axle 3: Twin tires; Steered; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Weights Unladen weight: 13,060 kg Payload: 34,940 kg gross vehicle weight: 48,000 kg Functional Loading platform height: 90 cm Gtedpfxsxzt H Ds Af Seu Condition Damage: none Identification Registration number: OK-58-YS