Crawler excavator

Takeuchi TB175

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,889 h, machine/vehicle number: 17540236, Mobile excavator Condition: Ready for operation and fully functional Technical condition: good Tyre condition: NEW Itedpfsyt E N Ajx Adwed Description: Mobile excavator – wheeled excavator TAKEUCHI TB 175W, year of manufacture 2008, hydraulic quick coupler, 130 cm hydraulic ditching bucket

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: Iodek Af Svepfx Adwstd -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, fuel type: diesel, Year of construction: 2010, operating hours: 12,888 h, Takeuchi TB175W. Year of manufacture: 2010. Operating hours: 12,888. Operating weight: 8,610 kg. CE certified machine. Axle loads: 1: 4,305 kg 2: 4,305 kg 56.6 kW Adjustable boom. Quick coupler. 3rd, 4th and 5th hydraulic functions. Maximum speed: 25 km/h. 3 buckets: - 46x147x33 cm - 70x74x45 cm - 55x54x45 cm Tyres: 8.25-20. ID No.: 374. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements concluded by Heinhuis, and any preceding negotiations. By responding in any form, you accept the applicability of these General Terms and Conditions and declare that you have taken note of them. Our prices are net export prices. Itjdjyrmtajpfx Adwsd = Further information = Year of manufacture: 2010 Drive: Wheeled Unladen weight: 8,610 kg CE marking: Yes = Company information = For more information: WhatsApp:

Condition: used, functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, operation weight: 8,500 kg, first registration: 04/2012, Year of construction: 2012, operating hours: 8,200 h, Equipment: adjustable boom, air conditioning, all wheel drive, cabin, standard shovel, Tb 175 W wheeled excavator with hydraulic quick coupler CW10 and 150 cm ditching bucket, 8,200 operating hours, with articulated boom, air conditioning and auxiliary lines on the arm, in good used condition. Itedpfex Rupujx Adwjd

Condition: used, mileage: 1 km, first registration: 06/2012, fuel type: diesel, overall weight: 15,850 kg, color: red, total width: 2,550 mm, total height: 2,500 mm, Equipment: had accident, Damaged! Itsdehgtztjpfx Adwod Tank capacity: 8000 L water or 1000 L foam agent (integrated), water and foam tanks each with their own manhole cover, overflow, drainage, level indicator, and suction sump. Pump N55, water-cooled DEUTZ diesel engine, diesel tank 200 L, FIXMIX 3-stage foam proportioning (1%, 3%, 6%), electric water monitor RM60 incl. cable remote control, pump and monitor operation also possible from the carrier vehicle, electric foam agent pump (24V), tank filling connectors, battery charger incl. 230V supply, NATO socket 24V, roof lighting. PA913

Condition: used, Year of construction: 2011, operating hours: 12,000 h, Takeuchi 175 incl. 3 buckets * Load hook * Air conditioning Itjdol Hai Hjpfx Adwed * Bucket * Hydraulic bucket * Trench bucket * Blade support * Year 2011

Condition: used, Year of construction: 2012, operating hours: 5,546 h, Equipment: air conditioning, = Additional options and equipment = - Automatic/hydraulic quick coupling - Hammer/shear hydraulics = Further information = Drive: Wheel Unladen weight: 8,610 kg Itedpfx Aoxc Im Ujdwed Contact Geert Geuens for more information.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length Ijdsrgzv Njpfx Adwstd * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Year of construction: 2000, operating hours: 3,096 h, load capacity: 3,200 kg, lifting height: 12,000 mm, fuel type: diesel, construction height: 2,570 mm, power: 54.5 kW (74.10 HP), tire condition: 98 %, Equipment: all wheel drive, cabin, pallet forks, Off-road telescopic arm forklift JCB, type: 532 - 120 4x4x4, first use: 2001, LIFTING FORCE: 3,200 kg, LIFTING HEIGHT: 12.00 m, 4-cylinder PERKINS diesel engine (type: 1906/2200 - 74.12 HP / 54.50 kW at 2,200 rpm), ADDITIONAL HYDRAULICS, LONG LOADING FORKS (fork length: 1,200 mm / pick-up width: 1.400 mm), QUICK CHANGER, ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVE, hydraulic outriggers (2x), OVERLOAD WARNING DEVICE, ROPS / FOPS, large cab (colored glass), CPB, FRONT DISK PROTECTION GRILL, traffic lights, comfort seat, windshield wipers (2x), exterior mirrors (2x), WARNING LIGHT / WARNING SOUND, heating / ventilation, trailer coupling, retaining and transport eyes. Tires: BKT OFF-ROAD TIRES (15.5 / 80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 6,920 mm (approx. 5,900 mm without forks), width: approx. 2,330 mm, height: 2,570 mm. Price is net export, plus VAT in Germany. FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS PAID (!) © pb - - - - - - - - - - - - - - - - - - Rough terrain telescopic forklift JCB, type: 532 - 120 4x4x4, first use: 2001, LIFTING FORCE: 3.200 kg, LIFTING HEIGHT: 12.00 m, 4-cylinder PERKINS-diesel engine (type: 1906/2200 - 74.12 PS / 54.50 kW at 2.200 rpm), ADDITIONAL HYDRAULIC, LONG FORKS (fork length: 1.200 mm / width admission: 1.400 mm), QUICK CHANGER, 4-WHEEL-DRIVE-SYSTEM and ALL-WHEEL-STEERING (4x4x4) - CRAB STEERING (dogway), hydraulic supports (2x), OVERLOAD-PROTECTION-SYSTEM, ROPS / FOPS, big driverhouse (colorglass), CPB, WINDSHIELD PROTECTION GUARD, road lightings, comfortseat, windshield wiper (2x), back view mirror (2x), WARNING RING / WARNING LIGHT, heating / ventilation, follower coupling, hold- and transporthooks. Tyres: BKT OFF-ROAD TYRES (15.5 / 80 - 24) - all around approx. 98 %. Transport dimensions: see above. Price is net. EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) Ijdpsvbflvofx Adwotd

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Isdpfxewg N N Ij Adwotd Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions - Dimension b: 18,765 mm - Overall train length: 24,165 mm - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering