Low loader

Nooteboom OVB-42-03V 6X0 TUV 05/26 3x Steering Axle Exten...

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2025, MAX200-N-3A-13.60-19.5-2.54 Technical data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Empty weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height loaded: 950->1,050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Total width: 2,540 mm Technical description Loading area: Loading area in extendable design with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Cut-outs in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N) Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles: SAF axles: SAF axles CD, air-sprung, with disc brakes (377 mm), with lifting/lowering function. (ET 120). The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80kg) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Hjdpfx Ahsg Sk Tvjzsg Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included Yellow-red air couplings on the galvanized front connection panel. 2 pieces of brake shoes with holder. 2" kingpin A galvanized steel bulkhead approx. 2200 mm high. (± 105kg) EN12642-XL Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) on the rear of the trailer. Loading area with approx. 38 mm thick hardwood floor. (± 320kg) 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. (± 30kg) 1 spare wheel holder under the loading area on the right in the direction of travel. Tires 435/50 R 19.5 as selected by the manufacturer. A mud flap ( ) on the rear of the trailer. Manual and description on USB stick. A bracket for a rotating beacon on the rear of the trailer. One bracket for a rotating beacon on the gooseneck and on the rear panel on the left and right the warning signs including a socket. An INOX toolbox across the loading area. (1000x400x2500) (± 135kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the pull-out for a 45' container. (± 90kg) 4 pairs of WADER container locks. (± 60kg) 10 pairs of galvanized plug-in stanchions approx. 100 x 50 mm, 1,000 mm high. (± 220kg) 3 pairs of stanchion pocket strips, mounted across the loading area, for plug-in stanchion

Condition: used, empty load weight: 12,360 kg, maximum load weight: 32,640 kg, first registration: 11/2010, next inspection (TÜV): 09/2024, total length: 20,000 mm, total width: 25,500 mm, total height: 7,000 mm, suspension: air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,035 mm, front tire size: 245/70 R 17.5 /10mm, operation weight: 45,000 kg,

Condition: used, maximum load weight: 36,650 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 11/2025, Equipment: ABS, Excerpt of Equipment Loading Platform: Loading platform in extendable design with pneumatically operated locking mechanism. 2 pairs of horizontal lashing rings (LC 5,000 daN). 1 pair of lashing rings in the neck (LC 10,000 daN). 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN). Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Tyres: Tyres 245/70 R 17.5 – brand of our choice. Load index (146/146F). Axles: BPW axles, hydro-mechanically forced-steered. Air suspension with lift and lower valve. Axle tool kit. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa). Coating: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) top coat, single color in RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White). Rims silver. No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connection strip with socket outlets 24N, 24S & 15-pin. Connections compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Warning Boards: On the gooseneck and rear plate, a holder for warning boards each, including socket outlet, left and right. Includes the following additional equipment: - Rear steering controllable from the front and rear via cable remote control with push buttons, including single-track axle monitoring (without installation in the tractor unit) - Electro-hydraulic power pack. (± 45kg) - 4 wheel chocks with holder at the front wall. (± 5kg) - 2-inch kingpin - A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high. (± 35kg) - Yellow-red air couplings on the galvanized connection strip at the front. - Yellow reflective tape according to EU regulations on the side, on the extension and at the rear of the trailer. - European reflector plates (red-yellow) at the rear of the trailer. - A mudflap at the rear of the trailer. - Manual and description on USB stick. - A bracket for a rotating beacon at the rear of the trailer. - Loading area with heavy-duty hardwood floor. - 9 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm located in the outer frame of the loading platform. (± 27kg) - Extensions, galvanized, extendable by approx. 230 mm per side. (± 230kg) - Spiral cable for powering the electro-hydraulic pack and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with socket connection (NATO-NATO) - Galvanized supports under the bevel of the loading area. - On the central beam, a painted sand coating as anti-slip protection. - 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90kg) - 4 pairs of transverse stake pocket strips, mounted acro Hjdpfx Ahex Epznezsg

Condition: used, empty load weight: 10,800 kg, maximum load weight: 34,200 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/65 R 22,5, color: grey, Year of construction: 2022, Equipment: ABS, You receive a current & complete inspection and function report with every used trailer. Loading area: -Loading area in extendable design with pneumatically operated locking mechanism -There is an approx. 250 mm wide fixed intermediate table on the middle carrier -8 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Axles and tires: -PW axles and suspension, all axles with hydro-mechanical forced steering -Disc brakes, technical axle load: 9,000 kg -Air suspension with lifting and lowering valve -axle tool -6 tires 385/65 R 22.5 Brake system: -brake system in accordance with EU regulations with EBS-E (2S2M) Seat posts: -JOST seat posts (mechanical) with 2-speed gearbox for 24 tons lifting load (50 tons test load) Accessories included: -One bracket for the warning signs on the gooseneck and on the rear plate on the left and right, including socket -Reverse steering can be operated from the front and rear by cable remote control via pushbuttons, with tracking control of the axles -Electric hydraulic unit -4 wheel chocks with holder on the front wall -2" kingpin -One galvanized steel bulkhead approx. 2,200 mm high -Yellow-red air couplings on the galvanized connection strip at the front -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -One mud flap at the rear of the trailer -Manual and description -One bracket for a rotating beacon at the rear of the trailer -Loading area with approx. 30 mm thick wooden floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -6 pairs of WADER container pockets in the cargo bed, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -A layer of sand painted onto the central beam to prevent slipping -5 pairs of stanchion pocket rails, mounted transversely in the loading area, for 100 x 50 mm stanchions -One galvanized bracket transversely under the cargo bed approx. 2,390 x 720 x 400 mm -a ladder mounted on the right in the direction of travel -One toolbox 1,200 x 500 x 480 mm at the front under the cargo bed on the left in the direction of travel -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease and removable protection around the pump -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver as single-track control -Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm with a position lightA holder for rotating beacon on the warning panels -2 reversing lights mounted on the rear panel -Speed sticker 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%) Hsdpfouuk Tuox Ahzjg

Condition: new, maximum load weight: 25,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 950 mm, total width: 2,550 mm, Total weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Overall length: 21,000 mm Loading length: loading area approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Additional information: Brand-new vehicle from ongoing production, available from approx. week 8/2026 Telescopic rear support 4 wheel chocks with holders 4 pairs of recessed container locks in the floor, suitable for 1x 40 ft. container or 2x 20 ft. containers 1 spare wheel holder for 1 spare wheel, with wheel fastening kit, basket design 11 pairs of stake pockets recessed in the outer frame, suitable for FR plug-in stakes 80x50 mm, installed flush with the outer frame, with opening for lashing strap or chain hooks 20 plug-in stakes, W=80 mm / D=50 mm / L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each rated at 3.5 t, fitted to the side frame - in the gooseneck area 13 pairs of foldable lashing rings, each rated at 10,000 daN, suspended freely swiveling along the side frame profile (also suitable for wide-load securing) 1 pair of foldable lashing rings, each rated at 10,000 daN, installed laterally in the intermediate support Air suspension with raise and lower function 1st axle: automatic lift axle, additionally with forced lowering including starting aid with operator button on the semi-trailer, no cab operation with lift & lower valve + auto reset function Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver 24 volt, multi-chamber lights, lateral yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear, LED 2 x 7-pin and 1 x 15-pin confusion-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Hedpoumha Njfx Ahzjg 1 removable rotating beacon on the underrun protection 1 x 7-pin socket at the rear 6 lateral sockets, 2x front wall, 2x landing legs, 2x rear end (left + right) 7-pin 2 work lamps recessed at the top in the front wall incl. switch 2 pairs of oversize boards, each with 2 LED marker lights per board, extendable sideways up to 3,500 mm, boards can also be attached to the loading area (width adjustment infinitely variable) Fixed steel front wall, 1,200 mm high, with robust steel corner posts without corner bevel, straight lateral design. 2 lashing holes at the top, inside and outside, in the front wall corners Front frame hot-dip galvanized + visible area of outer frame, finish painted in RAL 3002 Carmine Red Rear frame hot-dip galvanized + visible area of outer frame, finish painted in RAL 3002 Carmine Red Front wall RAL 3002 Carmine Red