Low loader

Kässbohrer NEW! Hydraulic Bed 450cm Extendable Lift+Steeri...

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Duodpfx Aajuu Hgdo Rol Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: used, empty load weight: 10,300 kg, maximum load weight: 25,700 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 01/1999, total length: 21,850 mm, suspension: other, color: red, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, - Faymonville STBZ-2AA. - Double extendable up to 21.85 m - Year of manufacture: 1999 - Axles: 2 x SAF axles, each with 10 tonnes axle load - Own weight (unladen weight): 10,300 kg Duedpfx Aaew H S D Ts Rel - Permissible payload: approx. 25,700 kg - Permissible total weight: 36,000 kg - Technically permissible total weight: 38,000 kg - Tyres: Tyre size: 245/70 R17.5, load index: 141J - Trailer in operation, location and inspection by arrangement - Subject to errors and prior sale! ... VAT can be stated separately

Condition: used, empty load weight: 10,730 kg, maximum load weight: 38,770 kg, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5 3PMSF, color: grey, Year of construction: 2024, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear slope of approx. 1,000 mm x 8° -6 pairs of lashing rings can be folded outwards -3 pairs of lashing rings can be folded outwards -1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: -A pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: approx. 40,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electro-magnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF -TPMS tire pressure monitoring system Paint finish: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component top coat in one color in MB 7350 nova grey Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -One bracket for rotating beacon at the rear of the trailer -Mounting in the rear area of the gooseneck for ALU trailer lights -Galvanized folding supports under the bevel of the cargo bed -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -ALU drop sides and rear wall can be plugged onto the gooseneck, approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable Length of the body approx. 2,560 mm -Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with one position light -3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container -6 pairs of stake pockets approx. 100x50 mm in the outer frame of the cargo bed Dodpsvcpagefx Aa Rjul -Galvanized extensions, extendable by approx. 230 mm per side -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -A layer of sand painted onto the chequer plates, above the kingpin and the cargo bed to prevent slipping -On the warning plates a holder for rotating beacon -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-peened, then the defined visible surfaces coated in Metallization with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Condition: used, Year of construction: 2024, operating hours: 35 h, machine/vehicle number: 2153586, Unladen weight: 7,040 kg Mast: Articulating boom Lifting capacity: 230 kg Working height: 1,200 cm Front tire condition: 90% Rear tire condition: 90% Max. horizontal outreach: 7.22 m Djdpfx Aajuwxzte Reul Transport dimensions (L x W x H): 5.64 x 1.2 x 1.99 m Contact PFEIFER GROUP for further information.

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer SLAR3 Extendable Lowbed with Wheel Wells Technical Specifications: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed semi-trailer with wheel wells, suitable for the transport of vehicles and heavy machinery. Dimensions Dujdpsx Epaqsfx Aa Rjl * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm with side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tons per axle) * King pin capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 fixed at the front, 1 trailing axle at the rear) * Lift axle: Manually selectable load-dependent lift (1st axle) * Axle type: BPW axles with drum brakes Tyres and Rims * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre ratings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Improves fuel efficiency and extends tyre lifespan * Number of rims: 12 (steel rims with offset ET120) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line pneumatic WABCO brake system, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, ASPÖCK multi-chamber lights, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² interconnect cables (3 m length) Ramps * Ramp type: Foldable hydraulic ramps with sliding mechanism * Capacity: 40 tons * Ramp floor: Made of hardwood * Safeguards: Ramp protection chain included Load Securing * Lash rings: - 2 x 2 each with 5,000 daN load capacity - 1 x 2 each with 10,000 daN load capacity on the gooseneck - 4 x 2 lash rings with 6,000 daN capacity in the deck area * Container lock housings: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm thick hardwood and steel floor with tear drop pattern * Wheel well bridging: Removable hardwood bridges with steel supports to cover the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colors * Chassis: Traffic red (RAL 3020) / also available in black * Partial metal coating of load surfaces Condition: New and immediately available. * Perfectly suited for heavy-duty transport and use in construction or machinery relocation.

Condition: new, axle configuration: 3 axles, loading space length: 12,250 mm, loading space width: 2,550 mm, total length: 13,350 mm, total width: 2,550 mm, total height: 3,600 mm, tire size: 235/75R17,5, color: red, Year of construction: 2025, = Additional options and accessories = - Floor material: steel (The material of the floor.) - Lashing rings (Lashing rings for secure cargo fastening.) = Further information = Brakes: Drum brakes Axle 1: Tyre size: 235/75R17.5; Lift axle; Tyre tread left: 100%; Tyre tread right: 100% Axle 2: Tyre size: 235/75R17.5; Tyre tread left: 100%; Tyre tread right: 100% Axle 3: Tyre size: 235/75R17.5; Steering axle; Tyre tread left: 100%; Tyre tread right: 100% Emission class: Euro 1 Dsdpfjxcwbnsx Aa Reul Registration number: 70293025 = Company information = Would you like more information about this vehicle? We recommend you visit BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and lead time • Support and services from BAS World Interested in learning more? Visit BAS World online!