Platform trailer

Renders **CRANE PALFINGER PK4500A-STEERING AXXLE**

Condition: used, Year of construction: 1999, Payload: 19,990 kg Gross vehicle weight: 8,010 kg Front tire condition: 70% Rear tire condition: 70% Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 Kjdpfxjutw I Ns Ahzenf Please contact PFEIFER GROUP for further information.

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Knedpfxsiuy Nlo Ahzjf Paint: -6-K final treatment -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: used, maximum load weight: 25,860 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2016, Equipment: ABS, Krone SZP Megatrailer Kjdpotxffbjfx Ahzjnf Flatbed + sliding tarpaulin with Edschaverdeck and portal doors, lifting roof, 2 axles, BPW axles, disc brakes, air suspension, ABS.

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 08/2024, loading space length: 13,590 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 1,010 mm, Equipment: ABS, VIN: W09SPLB2ZPEN10219 2-axle semi-trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth-wheel load: 12,000 kg Aggregate axle load: 20,000 kg Warning signs for oversize loads, extendable Steering: Specification: VSE ETS II, on both axles Axles / Suspension: Number / Capacity / Manufacturer: 2 x 10,000 kg, SAF Brakes: Drum brakes, 17.5" Suspension: Air suspension with lift and lower function Axle lift: not included Kedpsv T Hyfjfx Ahzenf Axle spacing: 2,100 mm Wheel size: 235 / 75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel toolboxes Locking positions: 6 pairs, suitable for the following positions: * 11,000 mm platform, flush with rear * 11,000 mm platform, flush with front 2,400 mm platform, flush with rear 2,400 mm platform, flush with front Load securing: Lashing eyes type: 50kN Vario (see attachment) Quantity & position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c/c approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake pocket rows across: 4 rows (positions to follow) Customs registration and insurance available on request for an additional charge! For export transactions, we can arrange export declaration and registration for you at cost. When exporting to third countries, a security deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding via mobile/WhatsApp. Please always schedule an appointment for inspection or test drive! Just drop by for a visit - we look forward to seeing you. The information provided online is non-binding and for descriptive purposes only. It does not constitute guaranteed properties. The seller accepts no liability for typographical or data transmission errors, modifications, input errors, or mistakes. Subject to prior sale.

Condition: used, empty load weight: 9,420 kg, maximum load weight: 21,580 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 05/2014, loading space length: 13,400 mm, loading space width: 2,450 mm, loading space height: 2,150 mm, total length: 14,300 mm, suspension: air, color: silver, gearing type: mechanical, Equipment: ABS, Steering axle Internal dimensions: 13.40x2.46x2.15 m tail lift 2,000 kg, steering axle, tail lift Knedsxqgnyspfx Ahzsf

Condition: used, empty load weight: 5,900 kg, maximum load weight: 24,100 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 06/2006, next inspection (TÜV): 06/2025, loading space length: 11,800 mm, loading space width: 2,300 mm, loading space height: 1 mm, suspension: air, tire size: 315/70R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, MB axles (disc brakes), air suspension, last axle with forced steering, ABS (anti-lock braking system), U-protection, aluminum side bumpers, supports, twin tyres, stanchions Body: 2-axle timber trailer with 6x Ecco aluminium bogies 2x Mercedes-Benz axle, disc brakes, galvanized frame. Loading height approx. 1540mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kodpfx Ahop Nkwvozjnf - .

Condition: used, maximum load weight: 15,100 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 07/2018, loading space length: 13,630 mm, loading space width: 2,500 mm, loading space height: 3,140 mm, Equipment: ABS, * Edscha sliding roof * Air suspension * 2-axle * Twin tires * 15,000 kg payload Kodpfjxvkvrex Ahzonf Internal vehicle number: 9328----Subject to errors & prior sale.