Log semitrailer

Rohr ROHR RSK/30IV Holzauflieger, Lenkachse, Verzinkt

Condition: used, Year of construction: 1999, Payload: 19,990 kg Iaodsutw I Nepfx Af Son Gross vehicle weight: 8,010 kg Front tire condition: 70% Rear tire condition: 70% Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Paint: -6-K final treatment -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Ijdeiuy Nljpfx Af Ssan Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: used, maximum load weight: 25,860 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2016, Equipment: ABS, Krone SZP Megatrailer Flatbed + sliding tarpaulin with Edschaverdeck and portal doors, lifting roof, 2 axles, BPW axles, disc brakes, air suspension, ABS. Isdpjtxffbofx Af Ssan

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 08/2024, loading space length: 13,590 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 1,010 mm, Equipment: ABS, VIN: W09SPLB2ZPEN10219 2-axle semi-trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth-wheel load: 12,000 kg Total axle load: 20,000 kg Warning signs for oversize, extendable Steering: Type: VSE ETS II, on both axles Axles/Suspension: Number / Capacities / Make: 2 x 10,000 kg, SAF Brakes: 17.5" drum brakes Suspension: Air suspension with lift and lowering function Axle lift: not included Axle spacing: 2,100 mm Wheel size: 235/75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel toolboxes Locking positions: 6 pairs, suitable for the following positions: — 11,000 mm platform flush with rear — 11,000 mm platform flush with front — 2,400 mm platform flush with rear — 2,400 mm platform flush with front Load securing Lashing ring type: 50kN Vario (see attachment) Quantity & position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c/c approx. 400 mm Stanchion pocket positions: 8 pairs for 81 mm x 51 mm stanchions in the outer frame Iaedpfx Afsv T Hyfj Ssn Transverse stanchion rows: 4 rows (positions to follow) Customs registration and insurance available on request at extra charge! For export business, we can undertake export declaration and registration for you for reimbursement of costs. For export to non-EU countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information please contact Mr. Lübberding via mobile/WhatsApp. Please always make an appointment for inspection/test drive! Just pay us a visit. We look forward to seeing you. —The information published online is non-binding descriptions. It does not constitute a warranted characteristic. The seller is not liable for typing or data transmission errors / changes / input errors / mistakes. Subject to prior sale.

Condition: used, maximum load weight: 15,100 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 07/2018, loading space length: 13,630 mm, loading space width: 2,500 mm, loading space height: 3,140 mm, Equipment: ABS, * Edscha sliding roof * Air suspension * 2-axle Iedpfx Asxvkvrof Sjan * Twin tires * 15,000 kg payload Internal vehicle number: 9328----Errors and interim sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Condition: excellent (used), axle configuration: 2 axles, first registration: 11/1993, total length: 136,700 mm, suspension: air, color: blue, Year of construction: 1993, Equipment: crane, VERY WELL-MAINTAINED SEMI-TRAILER 2X STEERING AXLE BELGIAN REGISTRATION DOCUMENT Iajdpfx Asw Am Igsf Sen = Further Information = Axle Configuration Axle Brand: BPW Suspension: Air suspension Rear axle 1: Twin tires; Steerable Rear axle 2: Twin tires; Steerable Weights Unladen weight: 11,400 kg Payload: 20,600 kg Gross Vehicle Weight: 32,000 kg Functionality Lifting capacity: 6,000 kg Lifting height: 780 cm Crane: PALFINGER PK14500A, year of manufacture 1992 Condition Technical condition: very good Visual condition: very good Further information Please contact Thierry Leemans for more details.