Platform trailer

GS Meppel AC-2800L Dutch Registration, 3 Axles, 20t L

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJMJ4CT840C175478, mileage: 111,380 km, power: 332 kW (451.39 HP), fuel type: diesel, empty load weight: 16,360 kg, maximum load weight: 15,565 kg, overall weight: 44,000 kg, tire size: 315/80R22,5 385/65R22,5, axle configuration: 8x8, wheelbase: 187,528,751,400 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, loading space volume: 3.75 m³, loading space length: 3,000 mm, loading space width: 2,400 mm, loading space height: 500 mm, Year of construction: 2007, operating hours: 9,704 h, operation weight: 32,000 kg, Equipment: ABS, additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, retarder, spoiler, traction control, trailer coupling, Iveco Trakker, 8x8 with large Stralis cab including sleeper unit. 150mt crane (Fassi brand) on interchangeable body. The crane can be mounted centrally or at the rear of the vehicle. Roadworthiness certificate valid until 11/26. A three-way tipper can also be fitted to the vehicle. The three-way tipper with hydraulic rear and side gate is also available for purchase. Nodpfsxwyi Rsx Ahzswr

Condition: excellent (used), functionality: fully functional, mileage: 27,672 km, power: 236 kW (320.87 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 36,000 kg, empty load weight: 36,000 kg, tire size: 385/95 R25, axle configuration: 6x4, number of seats: 1, first registration: 06/2020, DGUV certified until: 06/2026, next inspection (TÜV): 06/2026, emission class: euro5, mast type: telescopic, brakes: telma, suspension: hydraulics, Year of construction: 2020, operating hours: 2,468 h, machine/vehicle number: WLFC30CZXLEZZ0011, Equipment: ABS, UVV, additional headlights, air conditioning, differential lock, onboard computer, parking heater, retarder, soot filter, LOCATION: D-73230 KIRCHHEIM UNTER TECK Liebherr LTC 1050-3.1 – Serial No. 056 810 Lifting capacity: 50 t at 2.5 m (75%) Telescopic boom: 8.2 – 36 m (Telematik) Assembly jib: 1.5 m (incl. hook traverse and roller set) Number of winches: 1 Counterweight: 4.8 t / 1.7 t (6.5 t total) Hook blocks: 3-sheave, 32 t, double hook Outriggers: VarioBase (variable support base) Engine: Cummins 6-cylinder / 236 kW / 320 HP / Emission Stage V and EPA Tier 4 compliant Transmission: ZF 6 WG 210 powershift transmission with torque converter Retarder: Telma Drive/steering: 6 x 4 x 6 Tyres: 14.00 R25 (385/95 R25) Bridgestone (conversion to tyre size 445/95 R25 possible) Chassis operating hours: 1,212 h Superstructure operating hours: 2,468 h Mileage: 27,672 km Nwjdpfswrfa Tex Ahzer Safety system: LICCON 2 OTHER EQUIPMENT - Air conditioning and auxiliary heater - Upper structure lighting package: 2 x work lights (Xenon) on the boom head and 3 x lights on the slewing platform - Radio remote control incl. RemoteDrive - Height-adjustable crane cab - Winch monitoring and rear-view camera - 12 V socket in cab - Emergency operation of crane hydraulics Very good condition – German machine from first owner – further details on request – immediately available from stock in Kirchheim unter Teck.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 2,550 mm, total width: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container lock, U-protection, pneumatic adjustable drawbar, aluminum side wheel guards, twin tyres, storage box, removable drop sides Wheelbase: 5400 mm Body: Trailer for roll-off containers in lengths 6m-6.75m SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stop. The trailer can also be used as a flatbed! Aluminum side walls 600 mm high are included with the trailer! Drive-on ramps available for an extra charge of 900.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwjdpfei Rpxwex Ahzor - .

Condition: good (used), functionality: fully functional, mileage: 208,102 km, power: 205 kW (278.72 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 30,000 kg, tire size: 445/95 R25, axle configuration: 4x4, number of seats: 2, first registration: 09/2006, next inspection (TÜV): 10/2026, emission class: euro3, mast type: telescopic, brakes: telma, suspension: hydraulics, Year of construction: 2006, operating hours: 13,999 h, machine/vehicle number: W092725006EL05070, Equipment: ABS, UVV, all wheel drive, cabin, crane, differential lock, onboard computer, parking heater, retarder, LOCATION: D - 73230 Kirchheim unter Teck - Liebherr LTM 1040-2.1 | Serial No. 051 569 - Lifting Capacity: 40 t / 2.50 m / 75 % - Year of manufacture: 2006 - Telescopic Boom: 10.5 - 35 m Njdpfxoxyl Hmj Ahzewr - Folding Jib: 9.5 m - Counterweight: 1.5 t / 5 t (6.5 t) - Hook Blocks: 3-sheave 22.4 t (DH), 1-sheave 10 t - Engine: Replacement engine 2017 - Mercedes Diesel OM 906 LA - Operating hours: 7,070 h / 205 kW / 278 HP (EURO III) - Carrier operating hours: 9,469 h - Superstructure operating hours (crane operation): 14,000 h - Transmission: ZF 6 WG 210 - Auxiliary brake: Telma retarder - Drive/steering: 4 x 4 x 4 - Tyres: 16.00 R25 (445/95 R25) Bridgestone - Mileage: 208,102 km - Safety system: LICCON 1 Additional features: additional heating in crane cab, 12 V sockets in driver’s cab and crane cab, work lights (xenon) on jib base, aircraft warning light, reversing warning system. Condition: Age-appropriate good condition, immediately ready for operation - further details on request - available at short notice.

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Paint: -6-K final treatment Nedjiuy Nlspfx Ahzowr -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: used, machine/vehicle number: 28be789c7675b811b702c6cb3, empty load weight: 6,000 kg, maximum load weight: 20,000 kg, overall weight: 26,000 kg, axle configuration: 2 axles, first registration: 04/2018, tire size: 205 / 65 r 17,5, Further information Welded fine-grained steel construction, saddle plate with replaceable 2 king pins Reinforcer mounting point for gallows mounting and with sturdy grinding plates drum profile made of flat steel underneath the outer frame. Outer frame slightly inclined with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder, aluminum side bumpers, offset inwards as far as technically possible, steel underride guard, as much ground clearance as possible, quarter-shell mudguards in front of and behind each axle, suspension strip for aluminum ramps at the rear, plastic toolbox, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) SAF drum brake axles, with axle stopsAxle distance 1600 mm, air suspension with lifting & lowering valve 205 / 65 R 17.5, twin steel rims, factory silver Nwedomp Ug Djpfx Ahzjr 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 24 volt, multi-chamber lights, amber LED lighting integrated in outer frame profile at the side, offset inwards by approx. 25 mm, 10 lights per side 2 white position lights at the front, protected, 2 white/red lane departure lights at the rear, additional LED work light(s) at the rear, switched via reversing light 2 x 7-pin and 1 x 15-pin swap-proof sockets at the front, without connecting cable Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Special floor installation: test of new profiles, without bolting Steel/checker plate covering in the wheel arch area, front wall/front stanchions, 25 mm aluminum hollow profile, approx. 800 mm high, steel corner stanchions in volume design, with viewing windows on both sides. Approval country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: used, Year of construction: 2025, operating hours: 20 h, JUWEL 8 M V 5 N 100 OF VF-2025 Lemken Mounted Reversible Plough In standard configuration, additionally equipped with: Version: OF (On-land/rough conditions) Frame swing-in: Frame with hydraulic drawbar Turning cylinder: with hydraulic tilt adjustment + control unit Tilt indicator: on the turnover mechanism Frame height: 85 cm, clearance = 35 cm (5x) Nedpfx Ahjw S N U Tozowr Mouldboard type: Strip Dural (5x) Body type: BS42S Support with brace Offset with wearing plate (5x) Share: Cutting width 42 cm (SB56, strip type) Share design: thick (5x) Landside: A42H Mouldboard edge: standard Furrow/Universal wheel: Universal wheel, pneumatic 340/55-16 Wheel position: standard Fertiliser insert mouldboard: MS2 (5x) Fertiliser insert share: medium 18 cm Fertiliser insert stalk type: standard (5x) Fertiliser insert stalk length: standard Throw angle adjustment: without throw angle adjustment Disc coulter: 1 pair D500 smooth, side by side Packer arm: preparation Lighting system: (EU) preparation, 7-pole socket Working width per plough body: 30-50 cm / 30-55 cm / 36-60 cm Overload protection: double-cut shear bolt BODY SET Lemken Body Set Juwel 8 V L 100 In standard configuration, additionally with: Working width per plough body: 20 - 55 cm Frame height: 85 cm, clearance = 35 cm Body type: BS42S Support with brace Shares: 2SPS + SB45D / SB56D Landside: A42H Fertiliser insert: MS2-S245 Fertiliser insert stalk: standard Coulters: 1 pair Suitable for Lemken Juwel 8 M V 5 N 100

Condition: used, maximum load weight: 25,860 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2016, Equipment: ABS, Krone SZP Megatrailer Nwedotxffbopfx Ahzer Flatbed + sliding tarpaulin with Edschaverdeck and portal doors, lifting roof, 2 axles, BPW axles, disc brakes, air suspension, ABS.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area Nwedpswx Dcyjfx Ahzor * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2010, total length: 7,500 mm, total width: 2,500 mm, total height: 870 mm, Year of construction: 2010, YB45733AL040569 = Further Information = Front axle: Steered Technical condition: Very good Optical condition: Very good VAT/margin scheme: VAT deductible Contact Sales for more information. = Company Information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) MOB: Dutch (Available on WhatsApp and Viber) When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details as stated on our website. If you have received different information, please contact us. If you are in doubt, please call us so we can verify the invoice and/or payment. Nodoxpicwspfx Ahzjwr Bank Details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U