Tipper semitrailer

SCHWARZMüLLER K10VLN3 STAHLMULDE, PORTALTüREN, ALUFELGEN, LIFTACHSE, 60M3

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Laodpfxjgcw Rms Am Eja Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, mileage: 406,578 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, number of seats: 2, total width: 2,500 mm, loading space volume: 8 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 1997, Equipment: ABS, EBS, crane, trailer coupling, Engine capacity: 4.249 cc GVW: 7.490 kg Crane: Palfinger Laodsxt Tnfspfx Am Eja Selling price: € 12.000, US$ 13.870 Purchase on credit is possible: Yes Leasing is possible: Yes

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Ljdpfxsuwhrus Am Eeaa

Condition: used, empty load weight: 5,600 kg, maximum load weight: 25,900 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 10/1993, loading space length: 6,800 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, loading space volume: 19 m³, total length: 2,500 mm, total width: 3,100 mm, suspension: air, tire size: 385 / 65 R 22,5, color: grey, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, air-sprung, roller tarpaulin, catwalk, flap, folding U-protection, chute Body: Aluminum box body approx. 19m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lasdjvhhm Ajpfx Am Eja - .

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,200 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 2, total length: 2,500 mm, total width: 3,250 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lodpfx Amsvhg Rye Ejaa

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Ljdogcw Riepfx Am Eeaa Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, maximum load weight: 28,620 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2015, Year of construction: 2015, Equipment: ABS, KEMPF SKM TIPPER BODY LIFT FULL AIR SUSPENSION ----VEHICLE HISTORY * 1st OWNER * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST ----VEHICLE EQUIPMENT ----BODY * SKM TIPPER BODY * MANUAL TARPAULIN COVER ----BASIC DATA * 3-AXLE * PERMISSIBLE GROSS WEIGHT: 36,000 KG * 50 CUBIC METRES ----AXLES & CHASSIS * SAF AXLES * FULL AIR SUSPENSION * AXLE 1: LIFT AXLE * DISC BRAKES * ALL TYRES: 385/65R22.5 ----BRAKE SYSTEM * KNORR BRAKING SYSTEM ----ACCESSORIES & STORAGE * 1X SPARE WHEEL Ljdsw U H E Uspfx Am Ejaa * 2X TOOLBOXES ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT REGISTRATION / CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER); 5 DAYS, 30 DAYS PLATES, AND 17 - 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required Changes, errors, and prior sale reserved! More vehicles can be found on our homepage: Sale only in accordance with our General Terms and Conditions – see homepage Important Note – Important Information: Despite careful verification of all details in our offer, errors may occur; partly due to transmission errors from various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for contract initiation only. The details given do not represent guaranteed properties.

Condition: used, maximum load weight: 30,195 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2022, loading space length: 10,600 mm, loading space width: 2,330 mm, loading space height: 2,300 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rear tipping body approx. 57 cbm, double-wing rear door with rotary latch, 2 x grain chutes with covers, roll tarp, loading pressure gauge, HYVA tipping cylinder, JOST landing gears, ABS, EBS, SCB ROTOS axle(s), disc brake system, air suspension with lifting/lowering device, lift axle, automatic lowering of air suspension during tipping, vehicle may be stickered and/or signwritten with advertising, tow coupling SI85889 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be stickered and/or signwritten with advertising. Our general terms of delivery and payment apply. Lsdewm T Eyjpfx Am Ejaa We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: used, Year of construction: 2012, operating hours: 17,383 h, Serial number: 825.0.1916 Magnetic system Lasdpfx Amjrqb Dfs Eoa Operating hours: 17,383 MAXCAB - CABIN TELESCOPIC - RAISABLE Automatic climate control Rear and side monitoring with camera Outrigger support front + rear Central lubrication system Bucket handle: 4,850 mm Tires: 10.00 - Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc. Ledovx E N Aopfx Am Ejaa Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted.