Mobile excavator

SENNEBOGEN 825 - Umschlagbagger - Magnetanlage Nr.: 916

Condition: used, mileage: 406,578 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, number of seats: 2, total width: 2,500 mm, loading space volume: 8 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, EBS, crane, trailer coupling, Year of construction: 1997 Engine capacity: 4.249 cc GVW: 7.490 kg Crane: Palfinger Selling price: € 12.000, US$ 13.360 Blsdpfxjxt Tnfs Adwep Purchase on credit is possible: Yes Leasing is possible: Yes

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, Equipment: ABS, Schmitz Cargobull SKI 24 SL 10.5 Scrap Tipper * RENTAL * Scrap tipper 55.5 m3 * SCB axles * Portal doors * Air suspension * Air steering * Lift axle * Roll-up tarpaulin * 3 cross braces for stability * Boost pressure gauge Bodpfx Aev Ttx Ujdwjlp * Automatic lowering during tipping * ISO air connections with red and yellow coupling heads * 2 x 7-pin power connectors * 15-pin power connectors * ABS connection * Platform on the front wall * Folding underrun protection * Disc brakes * LED lights Rental possible! Subject to prior sale and errors! Sold exclusively subject to our terms and conditions. Important notice? Important information: Despite careful review of all details in our offer, errors may occur. These errors are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of contract initiation. The information provided here is provided without guarantee and therefore does not represent any guaranteed properties.

Condition: good (used), axle configuration: 3 axles, first registration: 08/2019, total length: 13,420 mm, total width: 2,550 mm, total height: 3,900 mm, color: yellow, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - Rear doors - Lift axle - Air suspension = Further Information = Intended use: Recycling Rear axle 1: Lift axle Unladen weight: 10,800 kg Payload: 33,200 kg Gross vehicle weight (GVW): 44,000 kg Body manufacturer: BODEX KIS 3 B Tipper: Rear Technical condition: Good Optical condition: Good 3-AXLE TIPPER TRAILER AIR SUSPENSION SAF AXLES 1 LIFT AXLE TYRES SIZE 385/65/R22.5 UNLADEN WEIGHT 10,800 KG HYVA TIPPING CYLINDER MOUNTED AT THE FRONT REAR TIPPER VOLUME = 75 m³ DOORS CATWALK AT THE FRONT SIDE WABCO SMART BOARD TOOLBOX FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL Bsdpfx Adey D Ub Djwolp WE SPEAK ENGLISH

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,200 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 2, total length: 9,300 mm, total width: 2,500 mm, total height: 3,250 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bledpfsvhg Rysx Adwsp - .

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories Bodpfx Adegcw Riswelp PVC fenders wi

Condition: used, empty load weight: 5,600 kg, maximum load weight: 25,900 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 10/1993, loading space length: 6,800 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, loading space volume: 19 m³, total length: 8,400 mm, total width: 2,500 mm, total height: 3,100 mm, suspension: air, tire size: 385 / 65 R 22,5, color: grey, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, air-sprung, roller tarpaulin, catwalk, flap, folding U-protection, chute Body: Aluminum box body approx. 19m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Blsdpfx Aovhhm Aodwop

Condition: like new (used), functionality: fully functional, empty load weight: 8,200 kg, maximum load weight: 27,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2026, loading space volume: 50 m³, color: blue, Year of construction: 2025, Equipment: ABS, IMMEDIATELY AVAILABLE!!! VERY GOOD CONDITION!!! AS NEW!!! WILTON NW-3 HARDOX steel tipper body 50m³ Bjdpeyzq Stofx Adwelp

Condition: used, mileage: 360,000 km, power: 272 kW (369.82 HP), first registration: 01/2004, fuel type: diesel, empty load weight: 12,560 kg, maximum load weight: 13,440 kg, overall weight: 26,000 kg, tire size: -, axle configuration: 6x2, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2004, Equipment: air conditioning, ref: VO26-2062 FOR SALE – Renault C 370 DCI Hooklift Truck, 6x2, FASSI Crane Brand: RENAULT Type: Hooklift truck with crane Bodpfx Ajyacmljdwjlp Axle configuration: 6x2 Year: 2004 Mileage: 360,000 km Color: White Fuel: Diesel Engine & Transmission Engine: Renault 370 DCI Power: 370 hp Transmission: Manual gearbox Heavy-duty transmission suitable for construction and public works Chassis & Axles Configuration: 6x2 Front axle: steering Rear axle: drive Additional support axle Mechanical suspension Reinforced chassis for hooklift and crane equipment Weights & Capacities GVW: 26 t GCW: 40 t Unladen weight: approx. 12,560 kg Equipment Hooklift system (ampliroll) FASSI auxiliary crane Ideal for handling, lifting, and loading operations Hydraulic controls Trailer coupling Versatile vehicle for construction, civil engineering, recycling, skips, and worksites Cab & Comfort Day cab Power steering Renault 370 dCi 6x2 hooklift truck with FASSI crane, ideal for professionals in construction, material collection, handling, and worksites. Crane brand: Fassi Delivery time (in days): 1 Air conditioning Air conditioning type: Manual Power steering Beacon Sunroof Power: 370 DIN hp Serial number: VF622CVA00010 Power: 272 kW Fiscal power: 30 CV

Condition: used, maximum load weight: 30,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 12/2026, total length: 11,800 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kempf SKM 35/3 steel tipper body * BPW axles with air suspension and disc brakes * 1st and 3rd axles can be lifted * Tires: 385/65R22.5 * Alco aluminum rims Bedpfx Adsz Ewyajwjlp * Aluminum outrigger supports * Work platform with access ladder * Retractable tarpaulin cover * 2 storage boxes * Ladder * Trailer information module * Work lights For further information, please do not hesitate to contact us.

Condition: used, fuel type: diesel, color: gold, Equipment: air conditioning, onboard computer, = Additional options and accessories = Bodpfx Aexxh S Ajdwjlp - Air seats - Autoradio - Auxiliary lamps - Central lubrication - Clamshell bucket - Clamshell excavator - Clamshell hydraulics - EBS - Heater - Hydraulic breaker - Hydrohammer hydraulics - Log grapple - Orange peel grapple - Originally painted - Portable radio set - Power steering - Reverse camera - Rock grapple - Seat heater - Sorting grapple - Steering wheel adjustment = More information = Year of construction: 2008 Operating hours: 23.158 Selling price: € 39.999, US$ 46.370 Purchase on credit is possible: Yes Leasing is possible: Yes