Tipper

Bodex SHSCHROOT-OPLEGGER KIPPER/TIPPER /AUFLIEGER/TRA...

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Dsdegcw Rmspfx Aqpjch Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, mileage: 298,630 km, power: 132 kW (179.47 HP), first registration: 11/1998, fuel type: diesel, wheelbase: 3,700 mm, fuel: diesel, gearing type: automatic, emission class: euro2, suspension: steel, total length: 7,340 mm, total width: 2,400 mm, total height: 3,350 mm, loading space length: 4,240 mm, loading space width: 2,340 mm, loading space height: 610 mm, Year of construction: 1998, Equipment: crane, = Additional options and accessories = - Adjustable steering wheel - Driver seat air suspension - Heated mirrors - PTO = Remarks = Additional information : Brand: VOLVO Model: FL 608 Structure: crane flatbed ( PK 8200 - boom 8 m / 930 kg - box L=4249 mm / W=2340 mm / H=615 mm ) Year: 11.1998 Mileage: 298630 km VIN: ... B211381 Wheel formula: 4x2 WB: 3700 mm Engine: D6A180 132 Kw / 180 Hp / Euro 2 Gearbox: automatic Suspension: steel / steel Brakes: drum Dimensions: L/W/H: 7340 mm / 2400 mm / 3350 mm Masses: full/empty: 8000 kg / 6290 kg Reach : 8.0 m Max lifting capacity at the end of a jib : 930 kg Axle configuration : 4x2 Suspension type : leaf_spring Brakes : Drum Suspension type : leaf_spring Brakes : Drum = More information = Cab: single Suspension: leaf suspension Empty weight: 6.290 kg Carrying capacity: 1.710 kg GVW: 8.000 kg Crane: Palfinger PK 8200, year of manufacture 1986 Dcjdpfouwu Ipsx Aqpsh

Condition: used, mileage: 406,578 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, number of seats: 2, total width: 2,500 mm, loading space volume: 8 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 1997, Equipment: ABS, EBS, crane, trailer coupling, Engine capacity: 4.249 cc GVW: 7.490 kg Crane: Palfinger Selling price: € 12.000, US$ 13.980 Dodpjxt Tnfofx Aqpjch Purchase on credit is possible: Yes Leasing is possible: Yes

Condition: used, mileage: 706,000 km, power: 315 kW (428.28 HP), first registration: 12/2015, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, loading space height: 1,000 mm, Equipment: soot filter, - Retarder, air conditioning, lift and steering axle suspension: Dcsdpfevh N Tkex Aqpoh Air suspension

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Dodpfx Asuwhrujqpsch

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,200 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 2, total length: 2,500 mm, total width: 3,250 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpevhg Rysfx Aqpoch - .

Condition: used, empty load weight: 5,600 kg, maximum load weight: 25,900 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 10/1993, loading space length: 6,800 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, loading space volume: 19 m³, total length: 2,500 mm, total width: 3,100 mm, suspension: air, tire size: 385 / 65 R 22,5, color: grey, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, air-sprung, roller tarpaulin, catwalk, flap, folding U-protection, chute Body: Aluminum box body approx. 19m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcodpfx Aqjvhhm Ajpjh - .

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Dcsdpfjgcw Risx Aqpsh Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, maximum load weight: 27,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2011, loading space length: 9,600 mm, loading space width: 2,340 mm, loading space height: 2,230 mm, loading space volume: 56 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Steel rear tipper body approx. 56 cbm, loading area (L): bottom - 10,000 mm, top - 10,730 mm, double wing door with rotary bolt lock at rear, grain chute, roll tarp, Jost landing gears, SAF INTRA axle(s), ABS, EBS, lift axle, air suspension with lifting and lowering device. The vehicle may have advertising stickers and/or lettering. SI86147 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Dedpfew Ndmlsx Aqpech We would be pleased to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, mileage: 655,000 km, power: 290 kW (394.29 HP), first registration: 09/2015, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,600 mm, loading space volume: 84 m³, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Frigoblock EK 25 U refrigeration unit * Driven by generator + 380 volts, stationary operation * 2,000 kg Bär tail lift * Medium-length cab * Automatic transmission * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning * Navigation system * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Heated seats * Aluminum floor * Interior cargo area 7,700 x 2,480 x 2,200 mm Dedpsvabc Usfx Aqpsch * Tires front and rear: 385/55 R 22.5, middle 315/70 R 22.5. Sold only as a combination with: Sold only with trailer: * Front flap for through-loading into the truck * Pneumatically extendable drawbar * WITHOUT refrigeration unit * 2,000 kg Bär tail lift * Manufacturer: Wüllhorst * Interior loading area 7,800 x 2,480 x 2,200 mm * 18,000 kg * First registered 10/2009 * BPW axles * Disc brakes * Air suspension The price includes the truck and trailer as a complete combination. Several combinations available, built between 2015 and 2017. Special features: Front axle load 8.0 t, driver's side airbag, audio system: CD radio (Bluetooth), exhaust facing down to the right, 220 Ah battery, standard and DuoMatic brake connection, compressed air connection in the cab, aluminum compressed air reservoir, high compressed air unit, driver assistance system: lane departure warning, tinted windshield with band filter, vehicle without trailer hitch, 150 A generator, 12.7 cm information display with additional display, communication interface, 2-cylinder air compressor, front engine PTO with Frigoblock preparation, reinforced engine brake, configurable special module, acoustic reversing alarm (external warning signal), tail lift switch, automatic circuit breaker, cab seats: driver's seat, comfort suspension seat, sun blind for side window, driver's door, voltage converter 24 V / 12 V 10 A, steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in the passenger footwell, preparation for a second control unit for leveling, CB radio preparation, preparation for a cool box/refrigerator, additional thermal insulation, auxiliary heating (water). Other equipment: EURO 6 emissions standard, axle configuration: 6x2, 2-wire trailer brake, left-hand connections, 24V/15-pin trailer socket, Antos, electric exterior mirrors. adjustable and heated, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tilting device, cab: M ClassicSpace, cab: steel suspension, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric windows, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 Ltr., manual lifting roof (steel), rear axle crown gear 440, body/structure: chassis, comfort locking system, fuel tank: 290 Ltr. aluminum, unregulated power steering pump, trailing axle lift device, air intake from the front, engine 10.7 Ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tires, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, Seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, front splash guard, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 24V cab socket, tachograph / EC control device, aerodynamically shaped underbody paneling, front underrun protection, preparation for toll collection, cranked front axle, regulated water pump, permissible total weight 25.00 t