Semi low-loader

Nooteboom MCO 85-06 V/Z

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin Gsdpfergzv Nsx Anqokb * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 159,620 km, Year of construction: 2006, operating hours: 28,594 h, Drive: Wheel drive Unladen weight: 36,000 kg Lifting capacity: 45,000 kg Dimensions of the cargo area: 1150 x 270 x 390 cm Serial number: 53304 Gkjdpfsylgxpjx Anqjb Condition of front tires: 70 Condition of rear tires: 70 Please contact PFEIFER GROUP for further information.

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 2 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW FLAT CONTAINER WITH TWO SIDES PER SIDE IN TR5 AND DOUBLE-EFFECT REAR SIDE WITH DOUBLE DOOR AND TIPPING EFFECT WITH CRANE SPACE AND FLOOR SUPPORTED BY 200 MM BEAMS, NO. 2 FRONT HYDRAULIC LOCKING PISTONS. REF: 24-N-41 TYPE: flatbed with sides in TR5 C NEW: yes COVER: no OPENING: rear and side 2+2 OVERALL DIMENSIONS Gkodsv Aqa Uepfx Anqeb TOTAL EXTERNAL LENGTH: 5.20 mt EXTERNAL WIDTH OF THE BODY: 2.55 mt FRONT SIDE: 1.60 mt + 0.10 mt horns REAR SIDE: 0.80 mt SIDE SIDE: 0.80 mt MC: 8 BOTTOM OF: 5 mm WALL OF: in TR5 COLOUR: grey Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Year of construction: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-Pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg GVW: 106,000 kg Empty weight: 23,480 kg Loading capacity: 82,520 kg Axles Brand axles: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steering 2nd axle rigid Axles 3 to 8 hydraulic steering Axle 1 & 2 liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-Pin height: +/- 1,280 mm Additional Information Operated on truck hydraulics Hydraulic operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin 3.5” Central greasing Markerboards oversize load Radio remote control = Further information = General Information Year of manufacture: 2009 Axle configuration Tire size: 235 / 75 R17.5 Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Gjdpjwwkrlofx Anqskb Rear axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tires; Max. axle load: 10,000 kg; Steered Weights Empty weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading floor height: 96 cm Extendable structure: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: excellent (used), mileage: 495,000 km, power: 537 kW (730.12 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: blue, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2017, Equipment: AdBlue, air conditioning, cruise control, retarder, second fuel tank, spoiler, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) = Remarks = Colour: Blue Details Manufacturer: Scania Model: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Mileage: approx. 495,000 km Engine: 730 HP / EURO 6 / 16 liters diesel / V8 Transmission: Scania Retarder R4100 First axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction Gross vehicle weight (GVW): 26,000 kg Gross combination weight (GCW): 160,000 kg Equipment 500L + 500L fuel tanks AdBlue NATO / 24-volt electrical system Warning beacons on roof Alcoa rims Toolbox PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto Cabin Multifunction steering wheel Cruise control Sun visor 2 x Bed Fridge Comfort seats Storage compartments Radio CD player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Gkjdpfx Aouu Ha Djnqsb Gross permissible weight: 42,000 kg Transmission Gearbox: Scania Retarder R4100 Axle Configuration Front axle: Tire size: 385/65 R 22.5; Aluminum rims; Max. axle load: 8,000 kg; Steered; Suspension: leaf suspension Mid axle: Tire size: 385/65 R 22.5; Aluminum rims; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Aluminum rims; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Aluminum rims; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: air suspension Functional Body brand: Scania Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Gkedpfx Anjg Sk T Dsqjb Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2016, suspension: air, Year of construction: 2016, Equipment: tail-lift, Suspension: Air suspension Rear axle 1: Steered Rear axle 2: Steered Rear axle 3: Steered Gross vehicle weight: 48,000 kg Technical condition: Very good Gedpfx Anevvwzroqekb Visual condition: Very good Price: On request Please contact David F Middelman for further information.

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Gjdpswg E Rbofx Anqekb

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Gjdpel Sl Izofx Anqskb Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Godpfxewg N N Is Anqskb Dimensions - Dimension b: 18,765 mm - Overall train length: 24,165 mm - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering